PIX and SSH - access to PIX via SSH

Similar Questions

• Termination of the client PIX VPN and Internet access from the same interface

  Hello

  VPN remote users connect to PIX (7.2) outside interface, but need to have these clients to access the Internet through the PIX outside interface as well. Need this because PIX IPs is registered and allowed access to some electronic libraries. One way would be to set up a proxy within the network and vpn users have access to the Internet through the proxy, but can it be done without proxy?

  Yes, public internet on a stick

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00805734ae.shtml

• Information about TelNet and SSH

  Hi all... IM new here

  Its my first qstion

  Q: I would like to know more about TelNet and SSH... How... can its work you explain this...?

  Hi Muhammed,

  Welcome to the Microsoft forums.

  I understand that you need to know about TelNet and SSH. I'll help you with the information.

  The Telnet utility to connect to other computers over a local network or on the Internet. Unlike a modern Web browser, Telnet uses only the controls text to interact through the network. While this method is a little outdated, it is still used by advanced users to test a network or perform maintenance on the system. Telnet is included with Windows 8, but is disabled by default. You can use the control panel to activate Telnet and then perform the network with application basic commands.

  a. open Control Panel. This can be done through charms, Windows + X, or by conducting a search on the start screen.

  b. Select programs from the main menu.

  c. click on or turn off Windows features turn on and approve the application administrative.

  d. check the Telnet Client and Telnet Server (depending on what you need).

  e. click OK.

  You can see the following TechNet article to learn more about TelNet.

  http://TechNet.Microsoft.com/en-us/library/cc732339 (v = ws.10) .aspx

  SSH (Secure Shell) allows you securely transfer files between computers on a network. All the data involved in the SSH session is encrypted in order to protect against hackers. Once SSH is installed on your computers and servers, you can create passwords for individual users, using programs included in the installation of SSH. If you need to SSH to a remote computer, you need to download a third-party program to connect via SSH.

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• I disabled the toolbar > > Menu button (via a right click on a PC, Windows 7) and cannot access the toolbar to add items to the sail back in. Any ideas?

  I disabled the toolbar > > Menu button (via a right click on a PC, Windows 7) and cannot access the toolbar to add items to the sail back in. Any ideas?

  Don't see the menu bar not (File, Edit, View, history, Favorites, tools, help)?
  Turn on/off the menu bar is a new feature in version 3.6.
  (Linux and OSX see: what happened to the file, edit and view menus? )
  Windows Method 1. Press and hold the key and press the letters of the following in this exact order: V T M
  Windows method 2 Press and release the button. The Menu bar is displayed; then choose ~ ~ red: V ~ ~ iew > ~ ~ red: T ~ ~ oolbars and click on ~ ~ Red: M ~ ~ enu Bar.
  The menu bar should now be displayed permanently, unless you turn it off again using view > toolbars. Check = not displayed, NO check mark is not displayed.
  See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing

  Navigation, bar toolbar bookmarks and other toolbars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

  To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).

  Mode full screen
  http://KB.mozillazine.org/netbooks#Full_screen

  See also:
  Back and front toolbar buttons or others are missing
  Customize controls, buttons, and Firefox toolbars

• WAP561 To Telnet and SSH

  Hello

  We have two WAP561 devices and they delivered with firmware 1.0.3.4. In this firmware release notes, there is open opposition with reference number CSCty22825, declaring that telnet and ssh is disabled in the interface chart and SNMP. In the notes of the other releases, as 1.1.0.4, this caveat is no longer present. We have improved our 1.1.0.4 devices, over telnet and ssh section is still not present in the GUI.

  Is there a way to enable ssh on these devices? In the administration guide, there should be a section called 'Telnet and SSH', but it is not present in the GUI. We also checked with the emulators with different firmwares. Still no telnet and ssh, section.

  Your help is very appreciated.

  Thank you

  Hello

  These options were available in a very old firmware (the first version) which is no longer present on the cisco.com site and unfortunately I do not have. For security reasons, these options have been removed the new firmwares available.

  I hope that the information provided was useful.

  If you have any other questions do not hesitate to contact me.

  Best regards

• Telnet and SSH

  Is it possible to have a different public IP (i.e. 66.102.7.000) address to telnet and SSH for the ASA 5510 remotely?  If it is possible, how you would install the telnet and SSH?  The config is attached.  Thank you.

  Laura

  laurabolda wrote:
  Thanks for your prompt response, Jon.
  For clarification, if my computer IP address is 66.102.7.10, can I SSH to the ASA (outside interface 109.66.25.80)? If I can, how would you set it up on the ASA?  Is it the same command as your previous response?
  Thanks.
  Laura
  

  Yes Laura he would be-

  SSH outside 66.102.7.10 255.255.255.255

  Jon

• GANYMEDE + and local access connection

  Basic summary is that I want to have GANYMEDE + and local connection to access router on the vty lines.  So, I did the two groups below.  Goody obviously is what will use GANYMEDE and Console uses the local connections.  I divide them between 0-4 and 5-15.  It seems that whoever is more get first priority for authentication.  If I move the Console to 0-4, knit then the local users and GANYMEDE do not.   If I have Goody at 0-4, then GANYMEDE works, but local doesn't work.  I know I'm missing something simple.  Have two RADIUS servers, I doubt that the two will never back down, but in case I want user names Local to work.   If I apply an access list to 4-0 and use SSH, as well as a list of different access to 5 15 and use telnet, it seems to work that way but doesn't help me if the internet goes down and I am trying to access the router via SSH on-site.

  Thanks in advance.

  David

  AAA authentication login Goody group Ganymede + local
  local authentication AAA Console connection

  Line con 0
  the Console connection authentication
  line to 0
  line vty 0 4
  session-timeout 7
  exec-timeout 5 0
  authentication of connection Goody
  entry ssh transport
  line vty 5 15
  session-timeout 7
  exec-timeout 5 0
  the Console connection authentication
  entry ssh transport

  Hi David -.

  Correct me if I'm not understanding this correctly, but you want to use RADIUS servers for authentication ssh/console type and if they fail, you want the network device to use its local database.

  If that is correct you should not need dividing lines and assign authentication lists. The first tribute that you have:

  AAA authentication login Goody group Ganymede + local

  Lists the Ganymede + and the local database as a possible authentication methods. They will be processed in the order they are configured so that the device will be:

  1. use your servers GANYMEDE +.

  2. If the GANYMEDE servers + inaccessible then the local database is used

  You can test this by assigning 'Goody' to all your vty lines and then do your servers GANYMEDE + unavailable. To do as possible you can:

  -Restart the server

  -Stop the server interface

  -Disconnect the device its uplink network

  -Create a list of access on the uplink interface and connection block to the IP addresses of the servers GANYMEDE +.

  I hope that helps!

  Thank you for evaluating useful messages!

• broken screen can I access my phone via laptop?

  broken screen can I access my phone via my laptop?

  Yes, you can connect to iTunes and iPhoto if your screen is cracked. The screen lights up at all? Or is it cracked.

• Preference system, security and confidentiality, accessibility - not working/empty

  Hello

  All of a sudden my system preference, safety and confidentiality, accessibility access list does not work, it is completely empty/Virgin and I can't use + / either. They do nothing. The + tries to add an app and I can select an app via the dialog box, but the window just shows blank after choosing an app. He never adds anything.

  I reboot several times and turned to cycling as nothing will do. I also zapped the PRAM, still nothing. I also used the Onyx to repair permissions and also checked the disk, everything going perfectly.

  The list never used to be empty, there are several apps listed in there, but they are all gone now. It is completely empty.

  I have problems because the apps that were once, now on the list will not work until I have added to the list, but I can't. I would like to buy yet another application that could control this list, but I don't know of any application that does.

  I hope someone has a solution or an idea of what to do because you have lived the same exact situation.

  I am running 10.11.5

  Thank you

  -Doren

  

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Cannot access the videos via USB more

  Nice day

  I have a HDR-SR10. I can't access the videos via USB more. drive appears blank in windows 8. Videos can be played through the screen of the device. Help, please

  Yes. Tried 2 usb ports with no luck.
  In fact. I downloaded the latest version of PMB and was able to import videos from cam. Once imported, I formatted the drive, then it pops up on the desktop as usual.
  For me, it wa weird experience and have no logical explanation.

• Atheros AR5007 wireless network adapter will give me only non-local local access and internet access. Any help please.

  Not sure if the problem is hardware or software. Reinstalled Vista (32 bit) and all programs. Make sure that the appropriate driver has been installed at HP. Can access the internet via ethernet, but wireless is detected with excellent resistance but will only give local access. I would be grateful for any feedback. In addition, it used to work properly. Not sure what happened to bring about change.

  I'm fighting this same question for months.  I fixed it just a few minutes ago.  I had been looking for Bulletin Board after Board.  Here's what I did - I hope it helps.

  Enter the network and sharing Center

  Other right of the connection - click to view the status of

  Click on properties

  Under your driver, click CONFIGURE
  Click on the DRIVER tab

  Click on update DRIVER

  Have windows search for the driver update.

  Once this is installed, I could immediately get Internet restored.  Months of frustration finally taking charge!

  Good luck!

• Safe mode, so I can not access the Services via a Normal startup.

  Services, including Security Center, Windows Update, SuperFetch needs to be restarted but Vista freezes outside Mode safe, so I can't access the Services via a Normal startup.
  CHKDSK shows the hard drive has no bad points and the system works fine in Safe Mode.
  No idea how to deal to freeze shortly after startup? Even McAfee should be started. No idea what order to these programs.
  I've already eliminated at least 10 programs that were part of the start-up, after executing six miracle of Microsoft Diagnostics.

  * original title - problem of catch-22 with Vista freezes *.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Try to put your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows XP:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• CUPS, Jabber IM for iPhone, Mobile and external access

  Hello world

  How do you provide external secure access for email Instant Jabber for iPhone client and the Cisco Mobile customer on an iPhone?

  There are so-called security SSL for Jabber Instant Messaging, but is unable to find all the information on how. The Cisco Mobile client appears to the needs of the AnyConnect VPN client and encourage users to connect via VPN, first...

  After a bit of bumping into a wall your head wondering why there was no documentation for external access to Cisco Jabber for iPhone, I realized that Cisco Jabber IM for iPhone is an entirely different product and Jabber for iPhone seems to be the new name of Cisco Mobile customers. Yet, the only documentation I can find for the Jabber Instant Messaging is that I can "security by using the Secure Sockets Layer (SSL) encryption" but no information on implimenting it with CUPS.

  On top of that, the Jabber IM for iPhone can not make calls but rather calls Cisco Mobile, which raises the question of providing external access to this too, and the only solution I've ever found is to use the AnyConnect VPN client on the device also. Suddenly, it seems to offer a solution of Cisco Unified Communications on an iPhone, I need three different and is applications is no longer quite as unified.

  Thank you

  Mark

  Conclusions you drew on the product names are correct. They are transitioning to Jabber like a brand name, but it did not in the iOS VoIP client yet. The most recent Cisco Jabber for Android is the first to include Secure Connect (remote access protected or ensure access transparent, aka). The BU seems characteristic knocking out on a single platform and then replicating them on others before moving on to the next batch of features. I don't have a specific timetable to share but expect customers to iOS updated in the coming months with Secure Connect.

  With regard to the separate clients: I can see both sides of this room. The more I use them more, I agree with the decision to keep them separated and cross-launch when necessary. If you think it is consistent with the way the user interacts already with their phone: voice and texting are two separate applications. I suspect that the developers also get some benefits by keeping things more targeted (e.g. less than test whenever they change something). The only downside to this approach is that each app consumes its own tunnel AnyConnect on the SAA.

• Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

  Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

  You must contact the seller and ask him to remove this iPhone in the devices list. Otherwise, your iPhone will be a useless brick.

  Find my iPhone Activation Lock: a mechanism of extraction of the previous owner - Apple Support

• Why do the topics become Chinese when I access my email via Firefox but not Internet Explorer?

  Why do the topics become Chinese when I access my email via Firefox but not Internet Explorer?

  Hello, this is a display caused the extension Advisor default McAfee site - please try to disable or remove that in case you have now until there's a mcafee update that may resolve the problem.

  http://service.McAfee.com/faqdocument.aspx?ID=TS100162
  https://community.McAfee.com/thread/76071