PIX led to the issue of ACL conversion

Similar Questions

• I have windows vista. I did a system restore. I can restore PIX saved on the backups before recovery was made?

  I have windows vista. I did a system restore. I can restore PIX saved on the backups before recovery was made?

  Hi rich,

  What kind of backup do you have?  If it were a full image backup, restoring them will be difficult unless you restore the entire image.  If it was a normal backup of files and folders, it should be fairly simple.

  Here is an article on the restore procedure: http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on backup and restore Vista process

  http://technet.Microsoft.com/en-us/magazine/2007.09.Backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.   It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Here is an article on the advanced use of restoration (during normal restore does not work):

  http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  If the above does not help with your problem, then please go to the special Microsoft Forum dedicated specifically to backup issues and problems at the: http://social.technet.microsoft.com/Forums/en-US/windowsbackup/ for assistance from experts by specialists in this field.

  I hope this helps.

  Good luck!

• The issue of logging of access control list name.

  Hello

  I've used ACL for many years and had not too many questions. I am a new client site and a project of Port authentication that we planned on using extanded access control lists to control traffic entirely open to help write the correct ACL for services using the ACL. The issue I have found is using the ACL below-> syslog logging does not show the port number which is exactly what we are after. We have not named ACL extended that record the port number as well.

  Running: Cisco IOS Software, s72033_rp (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2 (33) SXH3a, RELEASE SOFTWARE (fc1)

  IP extended Access-list-example access list

  IP enable any any newspaper
  deny ip any any newspaper

  The log output:

  Mar 22 11:23:46: % s-6-IPACCESSLOGP: the list of access-list-example permit tcp nnn.nnn.nnn.nnn (0)-> xxx.xxx.xxx.xxx (0), 1 packet

  On a normal extended access list, we get this in a log output:

  access-list 120 allow host ip nnn.nnn.nnn.nnn xxx.xxx.xxx.0 0.0.0.7 Journal

  Mar 22 09:31:46: % s-6-IPACCESSLOGP: list 120 permit tcp nnn.nnn.nnn.nnn (3874)-> xxx.xxx.xxx.xxx (5001), 1 packet

  This shows the port numbers - I was wondering what small thing that I missed on logging for what I checked: http://www.cisco.com/web/about/security/intelligence/acl-logging.html and I see that the use of the switch of newspaper should do this because it shows the port numbers in their example.

  I'm sure it'll be something simple but I can't figure it out - I searched all odd Cisco cautions for ACL named which connect to port numbers, but can't find anything easily. Just wondering if anyone else has experienced this.

  Thank you

  Z.

  For the port number appear in the newspapers, you must create the list of access as follows:

  IP extended Access-list-example access list

       permit tcp any gt 0 any gt 0 log
  
       permit udp any gt 0 any gt 0 log
  
  Hope that helps.
  
  

• Asked that question this morning but now cannot locate the issue. Where should I start looking?

  Original title: my question

  I asked a question this morning but now cannot locate the issue.  Where should I start looking?

  Thank you

  Kate

  According to your profile:
  http://answers.Microsoft.com/en-us/profile/09e3ff13-0096-4DA0-89fd-5ce723c7181e

  You asked a question ~ 6 minutes after you registered to use the forums.

  Message: ' Catalyst Control Center: the application host - the host application has stopped working. "
  [This is a link to the question...  Click on it].

  Essentially, it seems that in your message subject and body in this issue, you must download and install the latest version of the device for your AMD AMD video card driver.  It is an AMD problem, not a problem with Microsoft.

  However, since you have not given the brand & model of your computer or video card / the device in question - the best you can do is point you to where AMD is an application that allows you to scan and find the latest device driver and catalyst for your video card device software.

  http://support.AMD.com/en-us/download/auto-detect-tool

  Good luck!

  More information in the actual conversation:
  Message: ' Catalyst Control Center: the application host - the host application has stopped working. "

• I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Just send a question to the support site that I can NOT connect on my email account after auto update of 38.3.0, cannot connect to my account to check the issue!

  I just posted a question on the last update automatic 38.3.0 it is possible to log into different e-mail accounts in a profile, only the first e-mail account. My support mozilla account is linked to one of the email accounts that I can NOT connect to. Can't connect to this email account to check the issue. Your last 38.3.0 Thunderbird is useless because it is no longer possible to log in different e-mail accounts in a profile, and your support solution is useless because you need to connect to the e-mail account to check the issue.
  How to proceed?

  You can change your email associated with your media profile.
  I have 38.3.0 and I can access all my email accounts I suggest you try the initial tests:

  Start T-bird with disabled modules.
  If it works on your module is to blame and you need to activate one by one.

  Start your operating system in safe mode with active network.
  If it works probably your antivirus is blocking or delaying. (Or driver).

• Pages - trying to link the issue to the paragraph of the answer

  Hi there: neophyte user Pages for businesses trying to link the issue of the survey to a paragraph "answering machine".  As an example...

  Question:

  What's your brown grass?  Yes No

  If the answer is Yes, then want to fill and print a paragraph explaining...

  Your grass is Brown, because you're not watering or you need phosphorus or whatever.  Here's what you need to know about this resolution.  etc, etc.

  Any suggestions on the Pages or other popular apps.

  V5.6.2 pages is not suitable for the use of processing of affairs where one expects it to be a clone of Microsoft Word - who is not. There is no content link intra-document, support forms or runtime macros that manipulate the content of the document when the interactive user input. Pages is not a web design tool.

• Why can I not use 'Open the message in a conversation' more?

  We are 4 users and both of them have version 24.3.0, and two are on 24.4.0.
  We use the option "open message in the conversation" a lot and all of a sudden this option is no longer available. Is there a setting that could have been changed to make it happen?
  The only thing that has changed is that I have rearranged our records using "manually sort folders" - this could it be?

  All messages with a thread of before yesterday are always available with "open message in the conversation", but anything in the afternoon yesterday do not display the option when you right-click and using the swift short ctrl O does nothing.

  Any suggestions, what could be wrong are very welcomed.

  Thanks guys,.

  I think I managed to do the sorting now. I've done the following:
  See help at the top and choose "restart with disabled modules.
  Are you sure...? Press "restart".
  It will now ask you if you want to start in safe mode. Choose this option.
  The "manually sort folders work" is now disabled.
  Now close Thunderbird and wait a bit.
  Now open again, check if you have the Add-ons back - manually sort folders.
  Try to click an email again to view the message in a conversation.
  And so it works with adding on and open it in the conversation. Very strange but if it works, I'm happy.

• Blue LEDs on the front too clear on Satellite Pro U300

  Is it possible to lower the blue LEDs on the front of the Pro Satellite U 300 a bit? Power supply, HARD drive, etc. - I find them very distracting in a dimly lit room.
  Thank you.

  No, there no way to do it. But what about Sun ;)

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• How can I change/turn off the led under the speakers on Satellite P100?

  How can I change/turn off the led under the speakers? (in Satellite P100 (PSPA6E))
  Now I see the light only in the left side, but when I bought the computer left and right led line lights blue under the speakers.

  Gazz's right. It is not possible to switch off the LEDs. If just one LED is on the other must be faulty. Contact the customer Service of your country partner. I'm sure they can disconnect one too if you n t need her.

• How can I turn on/off the blue LEDs on the Satellite A100?

  Hello

  Does anyone know how to turn the blue LEDs under the touchpad? They are very nice, but when I go to sleep they light a lot and it is a small problem. Maybe someone can help me or suggest something else.
  Thanks for any answers

  Emil

  Hey Buddy,

  You can't turn them off. If you really want that you would have to reprogram the BIOS. And to do this, you must be a Toshiba engineer and a lot of experience with the low level hardware programming.

  You can also stick the tape on the lights. :)

  That is my suggestion.

  Welcome them

• Satellite A200-1N1: "Satellite" LED on the front panel does not light up

  Hi people!

  I noticed that my LED with the word "Satellite" on the front panel lights.

  You have all the hypotheses on the causes?

  Hi Maresha,

  The front 'logo' LED is enabled or disabled using a BIOS "Display front Logo" option that can be set on IT or OFF you need. Access your BIOS settings (F2 at startup) and check that this setting is set to 'ON '.

  Kind regards

• Central LEDs above the screen.

  Madam, Sir, today I noticed a red light, I believe that a led is mounted under the location of the listener. Looking closely, there are two LEDs above the screen well. I found nothing of talking over the internet.

  What is?

  

  These are sensors for the phone, no LED - they can look red if the light hits and consulted at the right angle. I'm not sure the g - but other phones have a proximity sensor that turns off the screen in pocket or against the head, ambient light sensor which controls the brightness. The X also has an infrared transmitter and a receiver.

• How to turn off the blue LEDs under the speakers on Satellite P100?

  Hello

  I have a P100-143. The laptop is great. How can I turn off the blue LEDs under the speakers? It's very scary and absolutely useless. If anyone has a solution, please share it. THX.

  Hello

  AFAIK there is no switch or something similar. I presume that the only solution is to cut the cable.