PIX - VPNGROUP PASSWORD recovery
I have a client who is upgrading a PIX 515. The old pix is configured for Client VPN access. They don't remember the password for the VPNGROUP. Is anyway to recover this password or at least move it to the new PIX? In other words, they want the new PIX to work with their existing VPN clients. This password is not encrypted, but it is hidden. Thanks for any help!
Use writing NET to copy the PIX config to a tftp server. The vpngroup passwords and shared the isakmp key will not be encrypted in config that is written on the tftp server.
Tags: Cisco Security
Similar Questions
-
501 PIX password recovery problems
Greetings,
I read the paper on password recovery, unfortunately, the orders contained in the document are not available in the PIX that I use.
Only commands that I see are:
Enable
opening of session
Logout
pager
quit smoking
I can see as well
checksum
curpriv
history
pager
Version
I can't go to one of the commands to connect to the tftp server as described in the instructions to the:
I have the .bin file of recovery password that I can't seem to get it on the PIX. Any help is greatly appreciated.
Thank you
Hi Brian,.
The command that you see in the RFSO are in rommon mode, not in the normal PIX config mode, you must reload the PIX, when IP is starting, keeping hitting the ESC key and it will take you to the rommon mode. Then, you can find these commands.
I hope this helps.
Thank you
Varun
Please evaluate the useful messages.
-
default configuration of the pix 501 past recovery/restoration
You need to reset the PIX 501 (lost password). I tried the password recovery instructions and accesses the monitor command by using the connection of the console, but cannot get the file to be transferred using tftp (ping command also expires).
1. in case ordering interface be set to 0 or 1 (I used 1)
2. the order of the address I was using 192.168.1.1
3. order the server, I was using the IP address of the tftp server
4. entry door? (Which is the PIX or the computer)?
5. in addition to the blue console cable that if all other cables should be connected and which ports.
Thank you
I'm guessing you already have this document:
I would like to use the default value inside of the interface of the 1. Connect a standard ethernet cable to one of the Interior ports on the PIX and the other to your PC that has the server tftp on it of the interface software. Make sure that you see a link on both ends light. If not, take this cable or save it if you think it is a crossover cable. If you set the PIX address to: 192.168.1.1, then I would set my tftp server address: 192.168.1.2 or something in the same subnet. In this way we will not care what is the gateway address. No need to let pesky routers get in the way, when we're down!
Since you asked the question 5 above, I'll explain. You should have a console cable connected, it seems do you since you can get to the monitor > prompt. You'll also need an ethernet cable plugged in a PC running a server tftp with the IP address: 192.168.1.2 3Com made a server tftp really good F * R * E * E.
http://support.3Com.com/software/utilities_for_windows_32_bit.htm
Select the last file in the list. Make sure you get that file recovery of password for the Cisco link above for the PIX OS version you are running. Configure the tftp server to point to the directory containing the PIX password recovery file and you are ready. Good luck, Derrick
-
I am absolutely amazed that there is no recovery password for iPhone backups encrypted.
(1) no password is required to access the iTunes application. He launched and the phone connects automatically.
(2) someone might maliciously put a password. The password for Mac or device using iTunes OSx need at least before setting the encryption password.
(3) there is no recovery option. None. Tell me: what password-protected sensitive data have NO option of recovery? No secret questions, no e-mail link, no OSx password, nothing. It's horrible.
I'm in a situation where I remember not the password, and even if I had the foresight to write it somewhere, that the hard copy has disappeared. I suffer a miserable condition where I lose memory. I have reset passwords on all my stuff course often. That's just my new reality.
I am faced with a situation where if I ever need to restore my device or upgrade to a new, I won't lose all my old texts and local health data in my applications (which is essential for a person with health problems). The loss of memories of conversations for a person who relies on these devices, precisely because I lose my memory is a slap in the face.
What the risk of COMPUTER audit team approved this feature, Apple? It's quite incredible that a company of your size would be created people to fail like this. Please post a fix in iTunes for password recovery and substitute it. PLEASE, I BEG YOU.
N ° if there is a way to recover or reset, the encryption would be completely useless.
Exercise good security practices on the computer where you have installed iTunes and you will not you care about someone maliciously setting a password for backups.
-
Lost administrative password recovery options
About once a day, I see the same post
"I lost my administrative password for my computer"
"I don't remember my password"
"I need to change the password and I don't remember"
Without failure, we put the passwords and forget about them and it is not always a simple process to remedy this solution. However, it is a simple process and can easily be avoided. If you read this thread and you have not lost your password to take measures now to protect yourself in case this happens. It will save you time and effort. Always remember, act now to save time tomorrow.
Retrieve the password using a password reset disk
This should be your preferred method to reset your password as this is something that you can do and need to do when you settle your account with a password. The password recovery CD must be created before you lost the password to be effective. If you have not already created it and you read this thread to be upward and out with what to do if you are having this issue right now stop and go create this disc.
Instructions available here
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-password-reset-disk
Now, if you have the drive and you have lost your password it is very simple.
1 start the computer and try to enter the password on the Windows login screen
2. the password is incorrect message opens, and from there, you can select ok
3. once the screen goes away, a new screen appears with an option to reset the password.
4. follow the instructions on the screen and use the password reset disk to reset your password
Change your password to a different user account
If you have multiple user accounts, and at least one of these other accounts have administrator rights, then you can reset your password from the other account. The password of this account may be necessary, then you can check with the owner of the account.
1. connect to the other account has administrator rights
2. click the start ORB, then select the Control Panel
3. from here, select the accounts of users and parental control
4. Select Manage another account
5. click on the account with the forgotten password
6. click on change password
7. type a new password and press on enter to confirm
8. click on change password
9 disconnect you, then try to log on to the original account
Return to a previous password
If you have recently changed your password and now can't remember, you can use the application of Microsoft System Restore to return to a time before you changed the password. This would of course imply remind you which has been the case the previous password.
To go back and use your old password follow these steps:
1. press on the F11 key repeatedly to open the HP System Recovery program on the system startup
2. under, I need help immediately, click the Microsoft System Restore option
3. follow the instructions to restore the computer to a previous state, choose a time before you changed the password.
Use a third-party program to attempt to reset / recover password
HP, like most other companies, do not support the use of third-party applications, but they do exist. If you cannot use one of the options mentioned previous then this is may be the option you want to try.
Removal and recovery of password programs exist and can be found on the internet through various searches on google.
One of these programs can be found here http://www.pcloginnow.com/ with instructions on how to use it here http://www.pcloginnow.com/guide.html
Remember that HP mentioned earlier does not support the use of third-party software to retrieve lost passwords, and then you use this tool or any other tool at your own risk.
Hope this helps you recover your lost password, or you read and warning and make a recovery for you disk protect.
-
System user name and password recovery options
Hi, looking for help to find my user name and password recovery system, I'm trying to factory reset my laptop, any information will be greatly appreciated, thanks siiinky
Generally, you don't need to insert any user name or password when you start the recovery process...
Usually, you must press ENTER to continue. -
RNR4000 password recovery (Readynas 1100) failed using the OS install procedure
I followed the procedure to perform a password recovery by pressing the reset button while you turn on/off the system. Now the NAS is stuck saying "File System Check" in startup RAIDar. RAIDar shows correct, model host name and the IP address has reset to 192.168.168.168. All road lights are green. How can I recover this system now that it does not start? Should I make a boot USB or boot TFTP?
What version of the firmware?
Also note that for the 1100, the default password is netgear1 if running RAIDiator 4.x or so in running RAIDiator 3.x it is infrant1
-
HP MINI 1000: HP MINI 1000 PASSWORD RECOVERY CNU9150CHZ AND CNU9150BRY
PLS HELP ME CNU9150BRY AND HP MINI 1000 PASSWORD RECOVERY CNU9150CHZ
CNU9150CHZ = e9lo3q1ez0
CNU9150BRY = e9lo3q1pbi
source > https://dl.dropboxusercontent.com/u/26983620/Java_Bios/biosunlock.html
You can then modify or disable in the bios settings, the bios password if necessary.
-
I need your help - account password recovery
Dear Microsoft,
I didn't sing in email * E-mail address is removed from the privacy * but I can't the recovery email. Please help me account Password Recovery Ref.
Account Password Recovery - * address email is removed from the privacy *.
Last post: TempUser A6E8F21A-E13F-4FE9-87A3-22B322D5184C, Thursday, June 9, 2011 11:39
Thursday, June 9, 2011 11:39
Utilisateurtemp A6E8F21A-E13F-4FE9-87A3-22B322D5184C
Thank you
Saravoot
Submit all Live and Hotmail queries on the forum right here:
Windows Live Solution Center
http://windowslivehelp.com/ -
Compaq mini CNU0022G2C: bios password recovery
Pls I need help my compaq mini password recovery
Hello
Enter: e9l1177h7e (3rd character is a lowercase L)
Kind regards
DP - K
-
Windows Live account password recovery.
Original title: password recovery.
If any of you have had or have the same problem as me, could you pls tell me how long
You need your old p/w which is sent to you via Windows Live. I hope soon. I changed my p/w, one too many times, and he got me in trouble. Now, I can't ' do not forget my p/w. If one of you had the same problem I have at the present time could you pls tell me how long it will take Windows to respond. So, your answers would be very greatly appreciated.
Hi Marly1956,
I recommend you post your question in Windows Live Solution Center for assistance.
Hope the helps of information.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
ZIP RAR ACE password recovery program
I found the ZIP RAR ACE password recovery program on my computer. Is it safe? Do I need?
Hello
ZIP RAR ACE Password Recovery is a program to recover passwords lost or forgotten files of the following types: ZIP, RAR (including v3.x, v4.x SFX, a work in several volumes and archives with encrypted filenames) and ACE archives.
If you have installed a publicly traded software then ZIP RAR ACE can help you recover the forgotten password.
Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
-
I forgot my user password on my computer. I have not configured a password recovery disk. Can it be unlocked and how?
I forgot my user password on my computer. I have not configured a password recovery disk. Can it be unlocked and how?
See if this tutorial Microsoft Support will help:
How to use system restore to log on Windows 7 or Windows Vista when you lose access to an accountIf she does not she, MS Answers leave no one helping users to bypass the password protection... Regardless of the reasons.
Here is the link to the policy: -
Need hotmail account password recovery
original title: waited MORE than 24 HOURS and STILL no account password recovery help!
I waited more than 24 hours for my account * address email is removed from the privacy * to be looked at and there was still has not been a response what so ever of you guys! its getting on my nerves. I understand that you are busy with the amount of the increase in applications, but I've been watching the forum since 2 days and you guys have been to answer the questions of a day there and I logged a request on the 4th, so its abit unfair to be honest so please someone take a look at my account as soon as possible!
peach888999,
Thank you for visiting the Microsoft answers community.
The question you have posted is bound using Windows Live (hotmail) and would be better suited in theCenter to help Windows Live Hotmail. Please visit this link to find a community that will provide the support you want.
Lisa
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
How to create a password recovery disk?
I'm not abe to log my vaio oon and the guest is to use the password recovery disk.
I do not, I am able to create one online using another computer? Of is not where I can buy one?
Audrey
I'm sorry, but that must be done before you have forgotten your password.
And you do not create it on a different computer.
http://Windows.Microsoft.com/en-AU/Windows-Vista/create-a-password-reset-disk
Above is the info on how to do the next time.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You need to reinstall Vista, that we cannot help you with lost or forgotten password here...
http://support.Microsoft.com/default.aspx/KB/189126
"Microsoft's strategy concerning lost or forgotten passwords"
Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.
Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
There is no EnginSearch search bar in the top right of the page and none appears when I try to restore the default values or manage search engines. To return to the search bar, I usually have to reset Firefox or start in safe mode, but this doesnm lo
-
How to import in Firefox preferences the herd of the deceased?
I've been a user of the herd's long-term, which is now no longer supported. I switch to Firefox. How to import bookmarks, etc.. ? I can only find ways to import from IE, which I don't use.
-
GoDaddy IMAP problems after 10.11.2
After the update to OS X 10.11.2, I have a very annoying problem with one of my IMAP accounts that have 5000 + messages in the Inbox of reception and sent items. Send messages re - download app (can't say exactly how many times, but several times a d
-
I have Windows 7 Home Premium and whenever I try to play multiplayer with my XP machine, the computer detects the game, but whenever I try to join, he tells me that he is unable to join the game. We have disabled the two firewalls, but that has not
-
Split 13-r010dx: the button "On" works intermittently
I have to press the button 'On' located at the top right of the screen on my HP Split several times until I get an answer. It will work eventually, but sometimes I have to press five or six times. It doesn't make a difference if I plugged in or on ba