Place forward, back etc. does not. Anyone else having this problem?
Hello:
I use Windows 8.1 on a 64-bit with Illustrator CC
Tonight I went to use Arrange > Send to back, but it won't work. Tired of others as well, but nothing.
I tried the keyboard shorts, but they did not either.
Any ideas?
This time I was able to just move the layer order, but there are times that this is not so simple.
Can I reset preferences? If so, could someone please remind me how it's done, please?
Thank you for your time. Very appreciated
Kar209 wrote:
This time I was able to just move the layer order, but there are times that this is not so simple.
Put in the background will only send to the back of the current layer of the element is on. The command will not move an item to another layer. Match draw 2 points on the same layer and send it to the rear should work, if it is not your preferences by pressing Ctrl Alt Shift immediately after restart Illustrator.
Tags: Illustrator
Similar Questions
-
Cards will be open any after update 9.3. Anyone else having this problem?
Cards will be open any after update 9.3. Anyone else having this problem?
No, not at all. Cards work properly.
Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
Also, make sure card is configured to use mobile data (settings app > cell phones > cards [turn it on if it isn't already].) And that location services is enabled for it (settings app > privacy > location Services)
-
I used Indesign for years without this problem...
But I noticed recently that many of these images (PSD, TIFF, or JPEG) that I placed in Indesign files are exported as pixelated, versions low resolution when I export for printing (PDF/X-1).
I tried different settings, but in each case, the image (which appears thin and sharp as seen in Indesign) came out like a pixelated mess blurred.
This seems to have started happening in the past months.
Vector graphics are fine.
Anyone else having this problem?
Or someone at - it a solution?
Also use some PDF parameters where resolution is not sous-echantillonnees at all.
Turn off downsampling.
And I would like to test, when you export to PDF/X-4 would make to the resolution of the images.
Just to know, if something is fundamentally wrong with your PDF export feature perhaps.
Uwe
-
I can click on the tool, but I can't catch the corners in the preview window and manipulate them. Anyone else having this problem, & have a solution?
Jesse,
I'm afraid that have met you the Rectangle Live bug that is limited to the MAC versions from 10.7 and 10.8, but not of 10.9 (Mavericks) or 10.10 (Yosemite). If all goes well, the bug will be fixed soon.
Thus, a switch for the Mavericks or Yosemite with a reinstall might be the way to solve it here and now.
To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool or the free transform tool.
A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:
-
Adobe XI Pro has been updated to 11.0.14 last week. I think the Adobe Pro XI 11.0.14 update is the reason that I now get a script error when I try to save PDFs for SharePoint, anyone else having this problem? It was working fine before. I can drag / drop files PDF to other folders to SharePoint, but I can't "save under" SharePoint I get the can't read the script error. I went to see if I could uninstall the update and it won't let me uninstall it.
Hi Sierra,
Bug # 4117305 for the number of script with SharePoint error has been fixed in our next quarterly update.
Kind regards
Rave -
All of a sudden I can't send messages on my AT & T account. I get a message that Thunderbird cannot connect to the server (SMTP). Called at & T and they checked all the settings. I can access my email account on Apple Mail and Yahoo (AT & T email provider), and yet I can not send messages on Thunderbird. I can receive but not send.
I tried deleting the account and the recovery, but that has not helped. Does anyone else have this problem?
Christ1,
Thanks for the tips.
Even set up a new account did not work. Despite AT & you s claim that it was not a problem with their servers and taking me through a number of measures to ensure what was the origin of the problem, he as magically disappeared as soon he came a few hours after all the machinations. So, still do not know what caused it, but it disappeared.
-
After 9.3 updated my iphone 6 today, all my Safari/Google searches a locked, website inaccessible. So very frustrating! Does anyone else have this problem since updatting to 9.3?
I have a 6 and updated iPhone updated to iOS 9.3 last night, works very well until noon today and I cannot click on all the links on safari?
-
Speed Dial not auto refreshing correctly, anyone else having this problem?
Speed dial is not automatically refresh some windows properly.
It was my Sandboxie so I had to do some configurations more to it here is a link to the post http://www.sandboxie.com/phpbb/viewtopic.php?t=12048 & highlight = speed + Dáil.
-
We bought Adobe Flash Professional CS5.5 Education Edition, and it will not be installed automatically.
We followed the directions to open the folder "at the root" to open the file set - up.exe, but there was no file set - up.exe after we did it.
We looked for the drive. Open all the files. Could not find the file anywhere.
Hi breth96064862,
Were you able to get installed CS5.5? If not, what is your operating system? If you are under Windows, it can help in this discussion: where can I find the file .exe Photoshop CS6/Windows 7 please?
You can also download the files from the link provided by Thomas and install Adobe Creative Suite 5.5 or 5.
Best,
Del
-
I will have questions whenever I try to import a clip on the timeline. It imports the sound but not the picture in time.
They play perfectly on the Source monitor and even hover on the bins scouring, but cannot slide on the timeline.
I found that it allows me to replace anything on the timeline with all that is on the Source or the bins, but not directly place.
I work with the Canon C100 files on first Pro CC (2015.2) On Windows 10
But it happens with all type of formats. Obviously not codecs problems.
How can I fix that?
Sounds like a follow-up/patch issue, in general, you do not have the blocks to the left of the command sequence "checked" block to allow the targeting of these tracks. These things...
Neil
-
I can't know labels more work in all version 4. Anyone else having this problem?
When I click on the tabs that is I get no response, even for the drop down next to I.E.Tabs. Plug-in is installed. Do I have to re - install the plugin for 4.0?
Installation of IE. compromised Tabs Firefox security because it installs the Microsoft ActiveX control the last potentially exposes your system to exploits.
If you want to install it in any case, I suggest you use this version: IE Tab Plus , which integrates Adblock Plus.
But read the "additional notice" before continue.
-
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Hi Jniles,
Thank you for visiting Microsoft Answers.
Do you have connected to your computer as an administrator?
User Account Control (UAC) notifies you before changes are made to your computer that require administrator-level permissions. The default UAC notifies you when programs try to make changes to your computer, but you can change how often UAC notifies you.
Open user account control settings by clicking the Start button, then Control Panel. In the search box, type uac, and then click change user account control settings.
Please visit these links for more information:
How can I change the behavior of user account control by using the slider?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider
When should I programs to make changes to my computer?
http://Windows.Microsoft.com/en-us/Windows7/when-should-I-allow-programs-to-make-changes-to-my-computerKind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
I just updated my creative application of cloud. Once this is updated correctly all my applications disappeared from my dock. And when I put applications in the dock, he can now find a subscription associated with my account. What the helllll. Anyone else having this problem? I type this, I expect to hear back by the people of the online help.
Hi André,.
You could try to connect the Creative outside swarm (in preferences) and before coming back in and see if that helps. The procedure is described here: connect and disconnect activate Cloud Creative applications
-Dave
-
After the update (December 2015), Camera Raw does not on the save new Camera Raw default. It keeps coming back to the default settings. Does anyone else have this problem?
Yes, this is the same bug.
The engineering team working on it.
We have no fixed timeline.
In the meantime, you can restore the previous update.
-
"When you try to upgrade to photos in app store I get this message"the object you requested is not available in the store US."does anyone else have this problem or can you tell me how to find pictures in the app store" someone else meets this. Is it me or is it pictures?
Ever photos first? It should have been included when you first update of Yosemite and now El Capitan. I know that iPhotos updates get a message like that, but I didn't know the Photos app with a message with it.
Maybe you are looking for
-
Software update 10.0.2
I downloaded and installed the software update 10.0.2 for my phone this morning and HE HATES! Why Apple does not provide a way to uninstall the update, as an option for pc Microsoft System Restore? Either that, or allow users to get an overview of w
-
How can I prevent a website from the removal of the Favorites toolbar in my browser?
Is there a site that I need to visit for work reasons. Unfortunately the site deletes my favorite tools of Firefox and my menu bar (File, Edit, View, etc...). Is there a way to prevent this site to change my browser like that?
-
When I click to open the hyperlink in my Word, the message file I get in Firefox is "the /submissions.htmlFirefoxHTML\Shell\Open\Command requested URL not found on this server." When I delete the part of the URL, the site opens successfully. What can
-
Hello!! We have here R710 breaks with the SAS 5 hard drive MBE2147RC model in a RAID5 configuration and we need to buy spare parts, but here they say they only 12Gbps of 300 GB 10 k RPM sas My question is that these drives are compatible in a RAID5 c
-
Can not find the download / installation package for Services of ripple.
I see a lot of posts talking about the fact that I should just "start and run the services of ripple" to test and debug my app phonegap/cordova. I can not however for the life of me figure out how to start waving services. It is not in /program files