Placed in a text object appears pixelated

Similar Questions

• mulitstate I object appears pixelated

  I built a multi-state object using 3 Adobe Illustrator files. I placed the renderings in the form of files HAVE native in InDesign, the page folio exported in pdf format. Seen on the retina of the iPad renders look pixelated. Not break but enough to be noticeable. I thought that if I used native files of HAVE and exported as PDF files would look sharp on the retina. Is there another way to get a higher resolution on the retina display?

  Thank you

  We had this sorted out. The fundamental problem was that the folio version has been set at 20. For vector overlays work the folio version must be v23 or later version.

  Neil

• Objects appear pixelated

  Hello

  I'm sort of a newbie with Illustrator and I recently bought a Pro Intuos of Wacom support.

  Also I practice a lot, trying to get better every day. Just today, I have encountered this problem.

  I was working on the face a raccoon, while suddenly, I noticed that a part of the fur (created with the pen tool) is very pixelated compared to the other part of the fur.

  I did a screen capture to make things clearer:

  

  As you can see on the full-size image the part around the eyes is very pixelated compared to the part above. I did nothing different, and I just kept when I finished the top fur, until I noticed.

  What is the problem here and I can fix it? When I export to JPEG it looks the same, and when I open the. IN Photoshop, the problem is there too.

  I already checked my settings for anti-aliasing and those who are very good.

  I hope someone can help me!

  Thank you very much!

  This happens often when there are two objects identical stancked on each other. You can check in the layer panel or just seecting and deletion.

• the placed images appear pixelated

  Hello

  I am trying to create a presentation for a comic to indesign.

  the images I use are 300 PPI images. When I place

  in indesign, they appear pixelated. I changed the screen high

  the quality and the effective ppi of the ISC 300 images. What

  otherwise may be the cause?

  You always use the preview a sous-echantillonnees. If ID each image displayed on a page, as it appears in the program Photoshop would never go. How they print?

• You can link two dynamic text objects?

  This is a question about dynamic text objects.  Is it possible to link two dynamic text objects so that they flow together into an email or a landing page?

  For example, say you have two dynamic text objects, DTO1 and DTO2.  Also assume that DTO1 can vary in length, for example, two lines of five lines.  Is it possible to establish that DTO2 runs immediately after DTO1 to say, a single line of space empty between them?  I see no way to do it in email or the landing page editor, but perhaps that there's a way to do it with html or another approach.

  Thank you

  Andy

  Hi Andy,.

  Yes, to do this with html raw. Once you have the code, you can either put in the view of the source of a text box (if you use the Eloqua editor) or just throw in some test-tube html.

  First of all, you need get the HTML for your dynamic elements. It's kind of awkward to get this code but not too difficult.

  • Open a downloaded landing page or sent e-mail. You can not access the landing pages or emails that have been built using the Eloqua editor code.
  • Display dynamic content browser and search for your dynamic elements
  • Drag them into the section code of your destination or by e-mail page
  • Copy the code that gets placed there then the output of the page destination or email without saving changes
  • The code should look like this:
    • It is a piece of sample code for an element of dynamic content

  Now, when you build your email or a landing page which will contain both of these two elements of dynamic content just sticking two snippets in there and separate with a line break)
  
  ) to get the bit of empty space. As I've mentioned above, you can place code in the view of the source of a text box (if you use the Eloqua editor) or just throw in some test-tube html.

  In fact, if your final product should be a page external destination loaded or email you could save yourself the time and code just in a place-holder when you generate your html code. Then when you're done uploading, please drag the dynamic elements in the code of the dynamic browser and add your line breaks.

  The final code should look like this:

  It is a piece of sample code for an element of dynamic content

  
  
  

  This is another sample of code for an element of dynamic content

• Help with Cinema 4 d Lite text object

  I'm trying to use Cinema 4 d Lite for the first time, but a large number of options that should be here are not. Under MoGraph, the only thing it is fractured and effector. There are no other options. How can I make it appear? I know it's a light version, but there should be more options (like text object) it.

  MoText doesn't even come in the full version of Cinema 4 d If you get the premium version or view it. You need a Broadcast or Studio version to have MoText. Now, you have the option of spline of text (which you can then put into an extrusion object), so you should be able to make a 3d text quite easily without MoText.

• How can I activate/disable the display of a scrolling text object?

  I am a relatively new user of Captivate and I am using the Interaction of learning in 8 Captivate text scrolling. Specifically, I would like to have a button on the screen when you click it, the drop-down text box will be displayed for the learner. In addition, when viewing, I want a REJECTION or button CLOSE to allow the user to hide the drop-down text box. Basically, I want them to be able to toggle the scrolling text box market at their convenience. I have the following set in place.

  1 READ MORE graphic.

  2. click on the box 1 interaction drawn at the top of the image to READ MORE.

  3 interaction marquee training.

  4. close.

  5. I have a Click Box 2 cartoon above the button interaction CLOSE.

  6. I have items 3 and 4 together to form GROUP_1.

  7 GROUP_1 is set to NO VISIBLE output.

  8. click on box 1 has defined action so that the success is to see THE GROUP_1.

  9. click on box 2A action defined for that success it is HIDE GROUP_1.

  Here's what it looks like:

  

  When I saw my project, the first part works fine, I click on READ MORE and my scroll text box and a button CLOSE appear as they should. However, when I click the button CLOSE, it moves to the next slide instead of simply to hide the group.

  Also, if I publish the project, the drop-down text box appear not at all. The button CLOSE pops up so when he is supposed to, but the space where the text box should appear does not display anything. I tried the consultation in Chrome Version 43.0.2357.132 m, 11 Version IE and Firefox v39. It seems to be related to the area of text scrolling in a group because I put a box of scrolling text on a separate screen and it shows well in all browsers.

  So, I'm looking for advice, including at - it an easier way to achieve the goal of enabling/disabling of the scrolling text box on and off the screen? TIA!

  Dee

  One thing you need to know using unique actions on objects interactive such as click on boxes or buttons will also trigger an action to continue later by default.  This is probably why your slides advance when you don't want to.  To work around this problem, you must replace the shares you are currently using with stock Standard or conditional Actions that do the same thing.  They don't progress not the timeline unless you stipulate specifically action continues or a jump to slip as well.

• How to make a text box appear in a PDF file in InDesign CC when the cursor rolls over another area of text?

  I'm doing a text box appears in a PDF document in InDesign when the cursor of the user hovers over an another textbox, and I want it to disappear when the cursor moves off the coast of the first text box. I tried the following with adjustment of various, and it does everything just for me.

  Display a different button on turnover

  You can create a hotspot in which clicking or mousing over an object contains another object. To do this, create two buttons, hide one of the buttons and use the show/hide button action to show and hide the button target.

  • Create an object to use as the "source" button. In the buttons Panel, click the icon of the object to convert to A button.

  • Place the image you want to use as the button target and convert it to a button.

  • Select the target image and select hidden until this that triggered at the bottom of the Panel buttons.

    The image must be hidden in the exported document that can be displayed when the "source" button is clicked or wriggle on.

  • Click the source button and create two different actions, one for show the image target and target the other to hide the image.

    If you want the image to appear when the mouse is over the button source, use events on Roll Over and On Roll Off. If you want the image to appear when you click on the source button and disappear when you release, use events on a click and release. In both cases, use the show/hide action buttons to show or hide the target button. See the interactive buttons.

  • Use the Preview Panel to test the buttons.

  Should work...  On your last point (not 12?) I get the feeling that you have exported your doc as Adobe PDF (Print)? You must instead use (Interactive) Adobe PDF...

  

• Magento text fields appear as white

  I've recently updated Firefox to version 11.

  When you work in Magento CMS, certain text fields are projected as empty, as if the data was lost.

  Once you take the lower right and make the bigger field, the text is displayed.

  Has anyone seen this problem and is there a solution?

  Thanks in advance

  11 Firefox introduces a problem with TinyMCE WYSIWYG/rich text editor. I wonder if this or a related issue affects Magento?

  You can try an another workaround: zoom a not upward and down a step and see if it causes the text to appear. (You can use Ctrl + Ctrl + - or Ctrl + mousewheel for this.)

• I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download.  Is it because iWeb can only support a limited number of links, hypertext, or any other reason?

  I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download.  Is it because iWeb can only support a limited number of links, hypertext, or any other reason?

  It has been much discussed.

  See my solution in this post:

  Re: Re: iWeb Publishing Solution in El Capitan

• My laptop computer screen appear pixelated

  Why my laptop screen then appears pixelated?

  Simply change the screen resolution?

• Insert a property root data in a text object

  Hello

  I am writing a script to create a default report with a variable number of pages.

  For this, I use objects DIAdem to create these new pages, but I got stuck trying to correctly configure some textbox.

  I would like to display a property of data root in all the pages, don't forget that pages are created as the script goes.  "In theory", this value is a user input (get via a DlgBox when the script runs) so what I did was to assing the value: Data.Root.Properties ("Report_Number"). The value to the new text object (by using the TXTTXT command).

  By doing this, the new report shows the value (as a simple text, no longer tied to the property) which is fine as long as the user knew this value. But here's the problem, sometimes this value cannot be specified until the last moment so that users may have to change and now it's not that simple to change the value of the property, and then click Refresh. He or she would need to go one by one in order to change this "number".

  I am looking to start a new modeless dialog box or a new buttom that opens/closes all these objects refreshing their text of values but move before I would like to know if there is something easier to keep the link between the value of the property and the text object.

  p.S. I use 11 DIAdem

  Thank you

  Javier

  Javier,

  I think that I thought about it!

  You simply send the property textbox as variable instead of just under form of text. Here is an example

  TXTTXT = "@Data.Root.Properties(""Report_Number"")." "Value".

  You can see that I added the @ on each end of the property and also quote the string so that the script he interpret correctly. I also had to quote the string Report_Number so that the VB script would interpret it correctly.

  Give that a try and let me know how it goes - I think it should work fine for you. After you run the script, I can change the property and then refresh the report and see the updated value.

• The RAW files appear pixelated

  Hello world

  When I open a RAW file in Ps they appear pixelated. I opened the Image resizing and it says that the files are about 1 Mb in size!

  I've rechecked in Lr and all files are fine. Even when I go to choose a file recently opened in the starting window of Ps, it shows the correct e.g. 20 MB file sizes.

  I must have done something myself because it wasn't this one a few hours ago, but I can't figure out what I did.

  Any suggestions?

  Thank you

  The image seems normal in Camera Raw window, pixelated in Photoshop (after you click Open a picture)?

  If so, check your settings in the bottom of Camera Raw workflow - make sure that resize them to fit is deselected.

  If this isn't the problem, please provide a detailed description of your workflow.

  

• A text box appears if a separate image is upside down?

  Hello

  Sorry if this is a stupid question, but I have searched for a solution to this problem:

  I made a gallery of images, and I want their descriptions below an image on rollover.  I also want to text boxes to stay under an images at the same distance on the page gets scaled down. If I have understood correctly, the text boxes must start below the image and stay on the same layer, so that they scale adapted in what concerns my images.

  Is there a way to make a sensitive layout and define a text box must appear as an image when the image is upside down?

  Thank you very much!

  Without seeing what you're trying to do, it is very difficult to answer. Have you tried to add the image and the description inside a container? Or maybe the ToolTip Widget can work for you, if you want the text to appear on mouseover or something.

• LR CC 2015.2.1 book module strange text will appear when I select the text box on page or photo

  The text below appears whenever I open a box of text on page or a picture in my book. It seems that it is Latin, but I think it's nonsense. I can't delete it

  because when I right click to select for deletion he disappears but then returned when I resize the page. Does anyone know what might

  be the cause; It's extremely annoying?  I'm sure that's buried somewhere.

  

  If you're still on 2015.2.1, then there are a lot of improvements with 2015.3 and 2015.4. Browse the blog for more info: http://blogs.adobe.com/lightroomjournal/

  The text is a placeholder for empty text boxes.