placeholder, reports of matrix in the oracle reports

Similar Questions

• How report us suspicious books, etc. on the oracle certification?

  
  How report us suspicious books, etc. on the oracle certification?

  For example, go to www.amazon.com and enter the following "marathon of the Oracle.

  Look at books, etc. "by M.

  user6862024 wrote:

  How report us suspicious books, etc. on the oracle certification?

  For example, go to www.amazon.com and enter the following "marathon of the Oracle.

  Look at books, etc. "by M.

  Well seen.

  Certainly on amazon.co.uk there was a bunch of braindump kindle publications in February.  It was a link to a url in one of them and certguard.com said braindump site.  In general only unpublished reputable publishers on amazon... now here can be a risk people scan a few pages/PDF of the copyright and area to make a quick profit.

  https://blogs.Oracle.com/certification/entry/cheating_part_7_what_can_you_a indicates that you can send an email [email protected] (they will not respond normally, but I know they'll take advice.

  You can also get the same email Global FAQ... search "fraud".

  (I am a bit careless in reports but only noticed amazon navigation at Easter... and I was distracted and busy... and who says fraud ocp are already probably already aware.)

• The matrix in the Apex report

  The matrix in the Apex report

  I met a delicate situation and would need the support of members of the community of Apex here.

  I would need to build a matrix report in Apex over a table containing about 500 rows and 2 columns.

  The report of the matrix must be format (col X lines) 20 X 25 to display all the data in the table.

  Please consider the following data containing 15 rows and 2 columns

  Table A

  Col_data Col_status

  ABC to the top

  BCD upward

  CDE upward

  def upward

  EFG down

  FGH upward

  IGS upward

  hij upward

  JKL upward

  KLM upward

  LMN upward

  MNO upward

  NOP upward

  Professions down

  PQR upward

  Now these data in the table should be displayed as a 3 X 5 matrix report.

  The idea here is to display only the col_data to end users.

  Col_data text would be colored in red or green according to the col_status than upwards or downwards, respectively.

  Formatting conditional html should be applied in this case.

  The problem here is that we report of matrix in Apex. This must be done in the sql query.

  While generating a matrix report using the sql query, we can select only a single column, and the status column is missed.

  This is why the data required for the conditional formatting (color) are not yet selected if generate us a matrix report using the sql query.

  Any help or alternative approach here would be greatly appreciated.

  ascheffer wrote:

  It is not all "tricky", or I miss the point?

  1. SELECT max (case when mod (rn, 3) = 1 then col_data end) col1
  2. , max (case when mod (rn, 3) = 2 col_data then end) col2
  3. , max (case when mod (rn, 3) = 0 then col_data end) col3
  4. , max (case when mod (rn, 3) = 1 then col_status end) col1_stat
  5. , max (case when mod (rn, 3) = 2 then col_status end) col2_stat
  6. , max (case when mod (rn, 3) = 0 then col_status end) col3_stat
  7. , ceil ((rn) / 3)
  8. (select col_data, col_status, row_number() on rn (order by null) from tablea)
  9. Group by ceil ((rn) / 3)

  It is perhaps not in SQL, but is not the only consideration... terms

• Are the "Oracle Hyperion Reporting and Analysis" and "Oracle Hyperion Financial Reporting," one and the same product?

  Are the "Oracle Hyperion Reporting and Analysis" and "Oracle Hyperion Financial Reporting," one and the same product?

  Alanysis and Hyperion reports has a scope of report include Hyperion Finanicial Reporting, web analytics services RA framework and the Foundation as a layer application and client level there EMP Workspace, SmartView etc.

  Thank you

  ~ KKT ~.

• Report of the Oracle of output basded on the user login

  Hi all
  
  I just want to know if the oracle report can collect data based on the person submitting the it.
  for example, lets say there is an absence report (to show the State of absence employees) now the requirement is that if a manager submits the present report, it should be able to see details of his subordinates only, not for all employees.
  
  Also, is there some way we can reach oracle reports as an individual employee and service need function not through submit window ask competing. I know it's possible if using Oracle discoverer report but not sure about the report.
  
  
  Thank you
  Avinash

  It is also quite possible. You can check this link. This report could be developed according to OFA and XML Publisher

  http://apps2fusion.com/at/51-PS/260-integrating-XML-Publisher-and-OA-framework

  Thank you

• How to add the message text in the oracle report

  Hi friends
  
  I am new to oracle reports, I would like to add a text message to my sheet of choice of report oracle at the end of the page like saying for example "the end of the page.
  
  How can I do this please suggest me
  
  Thank you
  AT

  Good morning Thiliban chennai,.
  We recommend the following document to learn more about the oracle reports

  http://download.Oracle.com/docs/CD/E12839_01/bi.1111/b32122/TOC.htm

  If you have any other questions, let us know.
  In the contrary case;
  Useful mark or response

  Best regards

• 10g - hide, the report contains the oracle user-defined function

  Hi, experts,
  
  of http://obiee101.blogspot.com/2008/07/obiee-cache-management.html
  
  Reasons why a request is not added to the Cache:
  
  
  
  •The-cacheable SQL element. If a SQL query contains Current_Timestamp, Current_Time, Rand, Populate, or a parameter marker, then it is not added to the cache.
  
  •The-cacheable table. Physical in the Oracle BI Server repository tables can be marked "cacheable". If a query refers to any non-cacheable table then the results of the query will not be added to the cache.
  
  •Cache hit. In general, if the query gets a cache hit on a previously cached query, then the results of the current query are not added to the cache. The exception is query that is aggregated at winding hits hits.
  
  Result set is too large.
  Query is canceled. This can happen by explicit cancellation of Oracle BI Presentation Services or Administration, or implicitly through timeout tool.
  
  •Oracle BI Server is clustered. Queries coming into family "seeding cache" spread in the whole of the cluster. Other queries continue to be stored locally. Therefore, even if a query may be cached on the Server BI Oracle 1 node, it can not be on the node Server BI Oracle 2.
  
  
  
  
  I would like to know
  If the application (report on the dashboard) calls a function defined by the user to oracle, the cache can be created and saved for this report?
  
  Thank you very much!

  Hello stephen,.

  If the application (report on the dashboard) calls a function defined by the user to oracle, the cache can be created and saved for this report?

  Yes, it is cached... function defined in the database is called OBIEE is cached and saved.

  More information and example can be found here http://oraclebizint.wordpress.com/2007/09/10/oracle-bi-ee-10133-support-for-native-database-functions-and-aggregates/

  Hope this helps you. Check answers to any other questions you have posted?

  By,.
  KK

• Hide number (or number format) on the Oracle report with bar code

  Hi al!
  I made an example of printing barcodes on the Oracle report
  with the link for help:
  [http://download-west.oracle.com/docs/html/B10602_01/orbr_barcode.htm | http://download-west.oracle.com/docs/html/B10602_01/orbr_barcode.htm]
  
  However
  I want to hide under barcode images or Format number!
  Ex:
  |||||||||||||| -> barcode images
  1234567 > barcode number
  
  I want to: hide: "123456" or format: "123.456".
  
  Thank you!

  Hello

  The Image is generated by the java code in oraclebarcode.jar
  It is possible to 'hide' a part of the image by putting an object ("rectangle" for example) on the part of the image that you want to hide.

  Concerning

• How to publish a report created by the Oracle Report Builder

  Hello world
  
  My colleague and I have tried to use the Oracle Report Builder to replace our existing report builder of our ERP system. We have already created the report in Report Builder from the suite of development.
  
  What we are looking for is a similar solution such as Microsoft reporting services;
  (1) create models of corporate report
  (2) and then download the template files to a location (for example, the folder on the server)
  (3) then all users in the company can access it through a web browser with a few fields which they can enter certain critiria (e.g. order number).
  (4) then send it to the printer and print out must stand exactly as the model.
  
  
  Unfortunately, we had very hard time trying to find out what it takes and how to publish this report in Oracle we have created. We spent 15 hours on it, but no results.
  
  15 hours we tried to install the 'Oracle' service, but finally, my colleague said that it was not what we are looking for you, "report Oracle service" is used to the error of the hosted application on the server, not to publish the report of company created by the "Oracle report bulider.
  
  
  We use Oracle Database 10 g for the LES quite a long time already. We had setup the Oracle Developer and the installed Application Server.
  
  Could someone tell us please what kind of service Oracle we are looking actually. Other guides any suggestion and installation are also the most welcoming.
  
  
  Best regards
  Bryan

  Hello

  If you want to be able to run your reports on the web, the best solution is to use the 'Oracle Application Server'

  http://www.Oracle.com/technology/software/products/IAS/htdocs/101202.html

  For example, the stand-alone edition of 'forms and reports Services '.

  Then, use the reports Servlet to submit applications for running a report server:

  http://download-UK.Oracle.com/docs/CD/B14099_17/bi.1012/b14048/pbr_run.htm
  Application server Oracle® reports Services publishing reports to the Web
  10g Release 2 (10.1.2)
  B14048-02

  13 queries in race report

  http://www.Oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/HOWTO/runPrint/deploy_rpt.htm
  Deploy a report

  Concerning

• SSRS for lack of outer join with the Oracle data source

  It seems to be a problem with the Oracle driver used in the Reporting SERVICES query designer.

  When you use an Oracle data source, if I create an outer join in the graphic designer, it automatically inserts '{OJ' before the join and '} ' after her.  This is an incorrect syntax for Oracle and refuses to start.  The curly braces and the JO editable in designer text, but if I go back to the graphic designer and immediately to reintegrate them.

  Only, this has started to happen a year or two ago - before that it worked, but with the old (+) syntax.

  Can it not be healed?  It makes things very difficult.

  -Geoff

  Hi Geoff,

  Thanks for posting in the Microsoft Community.

  However, the question you posted would be better suited in the Forums of the Oracle Support; We recommend that you post your query in Oracle Support Forums to get help:

  https://forums.Oracle.com/forums/main.jspa;JSESSIONID=8d92100c30d8fb401bcbd10b46c38c9ddf1a3242549a.e34SbxmSbNyKai0Lc3mPbhmSc3aNe0? CategoryID = 84

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• How to hide the field element of text based on true or false cases in the oracle apex

  Hello

  I have a set of text field in the oracle apex:

  1. Order number
  2. Revision number

  When we open the report, the review must be hidden.

  Only when the user enters the unique order number (order not duplicate numbers), revision number should be visible.

  If he enters the number of duplicate order, the revision number should be hidden.

  Help, please.

  Hi 2932464,

  2932464 wrote:

  Hello

  I have a set of text field in the oracle apex:

  1. Order number
  2. Revision number

  When we open the report, the review must be hidden.

  Only when the user enters the unique order number (order not duplicate numbers), revision number should be visible.

  If he enters the number of duplicate order, the revision number should be hidden.

  Help, please.

  Give you an example of how to do to get there.

  Step 1. Create three elements of the Page

  (1) P1_ORDER_NO - text field

  (2) P1_REVISION_NO - text field

  (3) P1_ENABLE_DISABLE_REVNO - hidden, protected value - no.

  2 create dynamic Actions 3

  (1) disable the revision on the loading of the page number

  Event - loading of the Page

  Action - disable

  Fires when the result of the event is - real

  Selection type - point

  Point - P1_REVISION_NO

  (2) check the number of duplicate order

  Event - change

  Selection type - item (s)

  Article (s) - P1_ORDER_NO

  Condition - is not null

  Action - to execute the PL/SQL Code

  Generate in front of false action - not checked

  Fires when the result of the event is - real

  Fire on page load - disabled

  Stop execution on error - checked

  Wait for the result - verified

  PL/SQL - code

  declare
  l_count number;
  begin
    select count(*) into l_count
      from emp
     where empno = :P1_ORDER_NO;
  
  if l_count > 0 then
    :P1_ENABLE_DISABLE_REVNO := 1;
  else
    :P1_ENABLE_DISABLE_REVNO := 0;
  end if;
  end;
  

  To present the page = P1_ORDER_NO

  Page referred to return = P1_ENABLE_DISABLE_REVNO

  (3) enable and disable the revision number

  Event - change

  Selection type - item (s)

  Article (s) - P1_ENABLE_DISABLE_REVNO

  condition - greater than or equal to

  value - 1

  Action - disable

  Fire on Page Laod - disabled

  Generate the opposite action of false - verified

  Selection type = item (s)

  Article (s) - P1_REVISION_NO

  Hope this helps you,

  Kind regards

  Jitendra

  DER_NO

• How do I uninstall the product from the Oracle EPM system

  Hi all

  y at - there no way how to uninstall a product of the Oracle EPM system?

  I don't want to uninstall the entire system and install again, I want to just uninstall the specific product.

  BR

  Vladislav

  OK, you can safely remove the service once the components have been uninstalled.

  Let me know which are the components you want to uninstall.

  To check the inventory:

  Go to the directory OPATCH. This gives the entire list.

  lsinventory-detail opatch - oh -jre

  Ex: opatch lsinventory-detail - oh D:/Oracle/Middleware/EPMSystem11R1/jre-D:, Oracle, Middleware, jdk160_45

  If you want to make sure that applications are not anywhere, you can also check in the following locations

  1. connect to the Weblogic administration Console, http://servername:7001 / console. Confirm if the managed server is removed by going to the servers

  2 EMP registry report (usually E:/Oracle/Middleware/userprojects/epmsystem1/bin/epmregistry.bat)

  3. Windows registry

  Thank you

  Anjum

• What do I need install Oracle Database 11 g 2 for the Oracle 10 g database migration?

  Hi all

  Would you be kind enough to help me with the following question!  I currently have Oracle Database 10 g on the old servers to my work and I want to install the GR 11, 2 on Windows Server 2008 R2 Enterprise Oracle database to new servers for upgrade.  I also forms, reports and Designer 10 g to maintain our existing applications.  So, I already looked in the Certification and found the following:

  Latest version of the product: latest version of the database server window weblogic

  Form Builder 11.1.2.0.0 11.2.0.4.0 7, 2008 R2, 2008 10.3.6.0.0

  Reports           11.1.2.0.0                                           11.2.0.4.0                                                 7, 2008 R2, 2008                                   10.3.6.0.0

  Designer 10.1.2.6.0 11.2.0.1.0 xp, vista, 7, 2003 (all 32 bit)

  For Designer, it is approved for a 32 - bit window, so I'm having trouble with the new requirement of system this window must be after 2003.  I want to take all of the availability and follow the Oracle certification (except that I will be given Designer because of compliance) as above.  I'm new with Oracle, and I don't know what comes with what to do it is complete.

  1. I'm going to install a database server (free 11.2.0.4.0 as described above) in a new server (2008 R2), then what I have to install the WebLogic Server with it?

  2. I'll install the generator of reports and Forms Builder (11.1.2.0.0) in another server (2008R2), so what I have to install WebLogic Server as well with her?

  3. what else do I need to install on this two server so that they work so that I can begin to migrate all existing data, forms and States more?

  Any advice would be greatly appreciated.  Thank you.

  Remember that this forum is targeted to the Oracle Forms product, for questions about the database can be better answered in one of the areas of database.  That being said, here are my comments:

  1 I'll install a database server (version 11.2.0.4.0 as described above) in a new server (2008 R2), then what I have to install the WebLogic Server with it?

  A database facility didn't need of WLS (which I am aware). Consider what you want is a typical design at three levels. Database - average level (applications server) - Client (tools and end user).   Each level has nothing to do with the other installation point of view assuming that they are not installed on the same computer. WLS is a middleware software (medium level). Be sure to check the product documentation before performing any installation. The 11.2 DB docs can be found here:

  http://docs.Oracle.com/CD/E11882_01/index.htm

  2. I will install Forms Builder and Report Builder (11.1.2.0.0) in another server (2008R2), so what I have to install WebLogic Server as well with it?

  Tools (Forms Builder, generator of reports, etc.) are not remote or web tools.  These must be installed on each developer's computer.  The installation of these tools does not require that WLS be installed first (on the developer's computer), but there is no need to be run unless the developer wants to apply locally for testing.  For a production deployment (multi-user), a similar concept will be used.  WLS will be installed first, followed by the forms and reports Services (runtime).  It will be on your remote server (medium level).  Software distribution you use will be exactly the same for the developer and the installation of intermediate level.  The difference will be in the options you choose during installation.  If you want to include manufacturers during installation, simply check the appropriate boxes when you are prompted.

  Also, if you plan to use the forms/States 11 GR 2, I recommend not using 11.1.2.0 and instead use 11.1.2.2, which is the latest version. F/R 11.1.2.2 installation requires that you first install WLS 10.3.6.  You should refer to the product documentation before beginning any installation. Specifically, carefully examine the product Setup Guide and Guide to the system requirements. The 11.1.2.2 doc library can be found here:

  • http://docs.Oracle.com/CD/E48391_01/index.htm

  3 what else do I need to install on this two server so that they work so that I can begin to migrate all the existing data, forms and States on?

  Looks like you've covered everything.  The granular details will be covered in the Installation and Guides to the system requirements.

  My recommendations:

  o ensure that each machine has at least 4gig of RAM

  o ensure that each machine has a static IP address before you start any part of the installation.  This can be done without a static IP address, but you must take additional steps (see Guide to Sys Req).

  o on machines where you plan to install WLS, make sure you have a 64 bit JDK installed first.  If you don't use a F/R 11.1.2.2, you must use Java 6.  However, if you decide to use 11.1.2.2, you can use Java 6 or 7.  Do not use Java 8 in all cases.

  When it comes to the designer, it must be installed on an old machine.  In General, I do not recommend to use it longer.  Although there is currently not a way to full migration out of it, you can use SQL Developer to manage the db objects that were created/used with it.  There are several MyOracleSupport documents that discuss the issue.  You can search the Knowledge Base of MOS to find or contact Support for more information.

• Can I ask what's happened on the Oracle Forms forum, after reading it for 20-odd years it seems to have disappeared?

  Can I ask what's happened on the Oracle Forms forum, after reading it for 20-odd years it seems to have disappeared?

  I just get a message saying that the makers of the element do not exist, it can havbe been deleted when you try to access the page to:

  https://community.Oracle.com/community/Developer/English/development_tools/application_development_in_pl_sql/forms_2

  TIA

  Ady

  Ady,

  Apparently the people who helped create this software was last updated forum decided to restructure the many places as well as simply a change of software...

  ... but could not be bothered to document changes, they went to the URL for the new locations.

  FORMS are always, like REPORTS.

  They were buried at the following locations tree:

  All locations > Database > Oracle + Options database > SQL and PL/SQL > PL/SQL application development

• Performance issues and options to reduce the loading with the Oracle text implementation

  Hi Experts,

  My database on Oracle 11.2.0.2 on Linux. We have Oracle implemented for the fuzzy search. Our oracle text indexes are defined as sync on commit that we cannot afford to have stale data.  Now our application done literally thousands of inserts/modifications/deletions of these columns where we have these Oracle text index defined. Thus, we see a significant impact on performance because the oracle text synchronization routines is called on each commit. We do nightly index optimization (optimization full every night at 3:00).  The text index oracle internal operations are appearing at the top of the sql page in our AWR report and fears it causes a lot of load on the DB.  Since we do optimization of the complete index once during the night, I think I should change that, and if I do, he's going to help us?

  For example, here are some data of AWR report my one day:

  Time elapsed (s)	Executions	Time by Exec (s)	% Total	% CPU	%IO	SQL ID	SQL module	SQL text
  27,386.25	305 441	0.09	16.50	15.82	9.98	ddr8uck5s5kp3		Start ctxsys.drvdml.com_sync_i...
  14,618.81	213 980	0.07	8.81	8.39	27.79	02yb6k216ntqf		begin ctxsys.syncrn (: idxownid,...)

  
  More top sql full text:

  ddr8uck5s5kp3	begin ctxsys.drvdml.com_sync_index (: idxname,: idxmem,: partname); end
  02yb6k216ntqf	begin ctxsys.syncrn (: idxownid,: idxoname,: idxid,: ixpid,: rtabnm,: flg); end;

  Now if I do optimization of the complete index that more often, and not only once night 15:00 will be this average, the load on DB sync on commit will decrease? If Yes, how many times should I optimized and the optimization itself does not lead to a load? Can anyone suggest?

  Thank you

  OrauserN

  It's to you which values you want to experiment.  Since 1 G, which is the same as 1024M is the maximum I could try that assigning to an index and see what effect it has.  You can use the same AWR report that you used previously and compare performance.  To determine when paging depends on your operating system and what tools you have.  Another option might be to use TRANSACTIONAL, that allows searching for unsynchronized lines and allow you to synchronize every five minutes, like Herald suggested, without any latency problem.  You can read about it here (scroll down to transaction):

  http://docs.Oracle.com/CD/E11882_01/text.112/e24436/csql.htm#CCREF23731