When computer booting XP, get "error loading C:\WINDOWS\sversrit.dll".
Hi, can someone help me please. I get the message "Error loading C:\WINDOWS\sversrit.dll" when windows starts. I think it might have something to do with Outlook Express, because around the same time I started having problems with forwarding of emails with attachments. Thank you.
A Google search for the name of the file is without success.
When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.
First of all, download, install, update and run both of these free analysis tools:
MalwareBytes AntiMalware
SUPERAntiSpyware
Do not run the scans at the same time. They can take some time, so start an and then go for a non computer chore for awhile.
If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns. Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message. If it is not displayed in the connection tab, click the "all" tab and use the file > search tool. A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."
Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box. The latter prevents the line running, but you can reactivate it later by removing the check mark.
Tags: Windows
Similar Questions
-
Whenever I start my computer, a message appears:
"Error loading C;\WINDOWS\ufidehipen.dll the specified module is not found."
Once the message is erased my computer works normally. Ironically received a hoax call, claiming they were from Microsoft Support. I did not claim. Have security of Norton 360. A run 'getcleaner' and ' getmalwarebytes. A ran all the Microsoft diagnostic tools and still have the same problem.
If anyone can help with a solution to my computer problem?Hi Caspwilson,
Not answering all calls for support!
Download CCleaner from www.piriform.com/ccleaner and scan your system.
I hope this helps.
-
When computer booting XP, get error NTLDR missing
When I turn on my computer I get the NTLDR error lack, I started with the installation CD and tried to repair but it is not recognizing the drive 'C '. It shows
? 4997MB \Device\Harddisk0\Partition1
? \Device\Harddisk0\Partition2 109467MB
E: \Device\CdRom0
.. is there a way to solve this problem?
Follow this link
http://pcsupport.about.com/od/findbyerrormessage/a/ntldrmissingxp.htm
-
Error loading C:\windows\pxtdmap.dll, what should I do?
Hi Nancy,.
The error message says anything else? Just, based on"C:\windows\pxtdmap.dll", I am unable to find a possible solution.
The error message contains more information or could look you in your system event viewer to see if there is a more detailed error message there?It would also be possible to use the system restore utility to restore your computer to a time where you did not receive this error? -
Original title: Rundll error help
As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?
It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit. If you make a mistake, that's all.These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem. Also, I'd be suspicious of ideas that begin with the words "try." You don't need to try things, you need to fix things. You don't need to try ideas that might work, you must do something that will always work all the time.Here are the detailed instructions that protect you and solve your problem in the 'right' way.There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them. If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.It might be a removal of malicious software or an application not installed. The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it. Autoruns (see below) you get the elements no matter where it is.You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).
If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer. The msconfig program is not a Startup Manager, that's a troubleshooting tool. Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration. Just disable the display of a start-up error message should not count as a 'solution' to the problem.If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns. The problem can always be found in the registry well.Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.Here is a link to a popular registry backup tool:You can also use the Autoruns to find the element of start remains little matter where he's hiding. Autoruns does not install anything on your computer. It will display all startup locations where the reference may be then you can turn it off or remove it completely. Here is the download link for Autoruns:Run Autoruns.exe and wait that he at the end of the filling of the list of entries.When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information. You are really interested only a few sections.The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.Scroll through the list and look for a boot entry associated files in the error message.If you can't find on the connection tab, look in any tab.You can also click file, search to search for logon, or any tab for all or part of the name of the element.Right-click on the offending entry and choose Remove. If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry. If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.Given that your system has or has had an infection, follow up with this:Perform scans for malware, and then fix any problems:Download, install, update and do a full scan with these free malware detection programs at:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish.Restart your computer and solve the outstanding issues. -
When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - specific module is not found - the computer seems to work very well however.
When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - specific module is not found - the computer seems to work very well however.
A Google search for this returned no success other than your own message. This suggests that the file refers to malicious software.
You have a recent version of an antivirus with a current subscription application? Have never leave you the subscription expires?
Startup like these messages can occur if your antimalware application has deleted the payload real malware but has failed to clean up the start of the call.
First download, install, update and run the following applications of malware free 2 the possibility that one or the other will detect and remove these remains (as well as anything else that your original scan could not detect):
If these two applications running is not the message disappears, you will need to know where the call to the missing dll file is now done. The best tool for this is AutoRuns:http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx the main problem with the help of AutoRuns is that he finds the startup items as much as it can be a little overwhelming. One of the good features of AutoRuns is that you can prevent an element of commissioning by unchecking the box, but if you decide that you really want to start, just re-check the box. Once you are sure that you will never need of the item to start, remove it.
Typical advice is to check the logon tab, but because the now-absent file is a dll, it is not likely to appear online in the logon tab. Yet, take a look at the connection tab and if aluzonah.dll is there, or if there is a line of starting an application of suspect search, a Google search suggests is malware, uncheck the box and restart. If the entry is far, re - run AutoRuns and remove the line.
The next place to look is the Winlogon tab, which should have little, or no, entries.
If you have not yet found the wrong entry, click the all tab, click the top row and then click on file > find and search for aluzonah.dll. If you find an instance, uncheck the box and then manually move the selection on the following bottom line then press F3 to "search again".
-
I get "RUNDLL error loading C\Windows\arelasiwitafabiz.dll." when I start my system.
Original title: my first RUNDLL error.
At startup, there is a small window on my desktop saying RUNDLL error loading C\Windows\arelasiwitafabiz.dll.
It disappears if I click OK, but always returns to the start. I downloaded a couple of registry cleaners; It is on the advice of the other forums, being a registry patrol, but I later read this was a suspicious program, so I removed it. In fact it seems to be a large number of suspects in programs offering assistance, so now don't know what to do. Finally what effect an error RUNDLL has on a computer. Any help please
The 10 landfills, three were from 2009 so I don't check those out. Four were on 8 June, two of 14 may, and one from May 17.
Finding bugs were IRQL_NOT_LESS_OR_EQUAL (4) or INVALID_WORK_QUEUE_ITEM (3). INVALID_WORK_QUEUE_ITEM bugs were all attributable to the sunkfilt.sys on December 8, 2004 - the "USB driver for the 6 in 1 media card reader" (your system is a HP?). The suggestion would be to update the driver, or off the device if you do not use. Finding bugs IRQL_NOT_LESS_OR_EQUAL were of same and all inconclusive - not irrefutable.
I would say that running chkdsk, and if you have a disk XP,SFC/scannow [Moreover, this], starting with.
-
Error loading C:windows\mstapox.dll, when you start Windows XP
Originsal title: error loading
When starting, I get the following message: error loading C:windows\mstapox.dll
Does anyone have a solution?
There is no file with this name in XP.
In addition, there very few dll that must be load in the c:\windows folder and is not one of them.
Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system. Not knowing the basic information a problem prolongs the frustration and the agony of these issues.
Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.
If that's really what you see, then your system is now or was hit by malware.
It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit. If you make a mistake, that's all.These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem. Also, I'd be suspicious of ideas that begin with the words "try." You don't need to try things, you need to fix things. You don't need to try ideas that might work, you must do something that will always work all the time.Here are the detailed instructions that protect you and solve your problem in the 'right' way.There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them. If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.It might be a removal of malicious software or an application not installed. The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it. Autoruns (see below) you get the elements no matter where it is.You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).
If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer. The msconfig program is not a Startup Manager, that's a troubleshooting tool. Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration. Just disable the display of a start-up error message should not count as a 'solution' to the problem.If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns. The problem can always be found in the registry well.Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.Here is a link to a popular registry backup tool:You can also use the Autoruns to find the element of start remains little matter where he's hiding. Autoruns does not install anything on your computer. It will display all startup locations where the reference may be then you can turn it off or remove it completely. Here is the download link for Autoruns:Run Autoruns.exe and wait that he at the end of the filling of the list of entries.When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information. You are really interested only a few sections.The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.Scroll through the list and look for a boot entry associated files in the error message.If you can't find on the connection tab, look in any tab.You can also click file, search to search for logon, or any tab for all or part of the name of the element.Right-click on the offending entry and choose Remove. If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry. If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.Given that your system has or has had an infection, follow up with this:Perform scans for malware, and then fix any problems:Download, install, update and do a full scan with these free malware detection programs at:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish.Restart your computer and solve the outstanding issues. -
I get an error loading C: Windows\ifapilidarexowex.dll rundll. How can I solve this problem?
I have a laptop Gateway running Windows XP Pro. When you connect to any account, I get an error loading C: Windows \ifapilidarexowex.dll rundll. I click on the OK button and the system starts and seems to work fine. It is an annoyance and should be fixed. I don't know how.
C: Windows\ifapilidarexowex.dll<-- this="" is="" a="" malware="">
As already mentioned by the first poster, the loading of the module above error is because the point of loading in the registry is still intact and trying to load a file that no longer exist. (A malware dll) file has been deleted either by your resident anti-virus or other scanners, but left intact registry value where the error.
What needs to be done, is either operate scanners who clean up redundant reg for example, MalwareBytes entries or other scanners or run other tools such as HijacThis and tick the corresponding section of fault start and click on the "Fix checked" button. hijackThis will then remove the redundant value and error loading stops. It is easier to use a tool, so you don't have to worry about editing the registry.
You could also disable the offending boot entry via msconfig > startup if it shows up there.Below is an example of an error in loading a module of malware that has been deleted by the antivirus, but has not removed the corresponding registry value.
04 entry in the log from hijackthis should look like the example below."Error loading c:\windows\system32\ravkgmff.dll the specified module is not found."
O4 - HKLM\... \Run: [GPLv3] rundll32.exe "C:\WINDOWS\system32\ravkgmff.dll",realset"
-
Whenever I reboot I get the following message: error loading C:\windows\claprv.dll
Whenever I reboot I get the following message:
Error loading C:\windows\claprv.dll
the specified module could not be found
What does that mean? The only thing that I found online, it is that it can be associated with some malware?
Any ideas?
Hello, Rojo97,
You have something to do with skiing? This site uses claprv.htm. You will get a 404 error page not found but the site is active.
http://www.Sloski.SI/resources/files/PDF/alpsko-smucanje/04-05/FIS/alp_claprv.htm
Have you added new software to your system recently?
Download Microsoft malicious software removal tool run a complete analysis
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16
-
Original title: cannot find awuvomas.dll
I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found." Can help you!
It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit. If you make a mistake, that's all.These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem. Also, I'd be suspicious of ideas that begin with the words "try." You don't need to try things, you need to fix things. You don't need to try ideas that might work, you must do something that will always work all the time.Here are the detailed instructions that protect you and solve your problem in the 'right' way.There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them. If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.It might be a removal of malicious software or an application not installed. The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it. Autoruns (see below) you get the elements no matter where it is.You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).
If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer. The msconfig program is not a Startup Manager, that's a troubleshooting tool. Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration. Just disable the display of a start-up error message should not count as a 'solution' to the problem.If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns. The problem can always be found in the registry well.Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.Here is a link to a popular registry backup tool:You can also use the Autoruns to find the element of start remains little matter where he's hiding. Autoruns does not install anything on your computer. It will display all startup locations where the reference may be then you can turn it off or remove it completely. Here is the download link for Autoruns:Run Autoruns.exe and wait that he at the end of the filling of the list of entries.When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information. You are really interested only a few sections.The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.Scroll through the list and look for a boot entry associated files in the error message.If you can't find on the connection tab, look in any tab.You can also click file, search to search for logon, or any tab for all or part of the name of the element.Right-click on the offending entry and choose Remove. If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry. If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.Given that your system has or has had an infection, follow up with this:Perform scans for malware, and then fix any problems:
No matter what you use for malware protection, follow these steps:Download, install, update and do a full scan with these free malware detection programs at:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish.Restart your computer and solve the outstanding issues. -
Error loading C:\Windows\icodonokecikotad.dll
On startup, I get a message window
RUNDLLError loading C:\Windows\icodonokecikotad.dllThe specified module could not be foundIt is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit. If you make a mistake, that's all.These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem. Also, I'd be suspicious of ideas that begin with the words "try." You don't need to try things, you need to fix things. You don't need to try ideas that might work, you must do something that will always work all the time.Here are the detailed instructions that protect you and solve your problem in the 'right' way.There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them. If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.It might be a removal of malicious software or an application not installed. The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it. Autoruns (see below) you get the elements no matter where it is.You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).
If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer. The msconfig program is not a Startup Manager, that's a troubleshooting tool. Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration. Just disable the display of a start-up error message should not count as a 'solution' to the problem.If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns. The problem can always be found in the registry well.Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.Here is a link to a popular registry backup tool:You can also use the Autoruns to find the element of start remains little matter where he's hiding. Autoruns does not install anything on your computer. It will display all startup locations where the reference may be then you can turn it off or remove it completely. Here is the download link for Autoruns:Run Autoruns.exe and wait that he at the end of the filling of the list of entries.When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information. You are really interested only a few sections.The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.Scroll through the list and look for a boot entry associated files in the error message.If you can't find on the connection tab, look in any tab.You can also click file, search to search for logon, or any tab for all or part of the name of the element.Right-click on the offending entry and choose Remove. If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry. If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.Given that your system has or has had an infection, follow up with this:Perform scans for malware, and then fix any problems:Download, install, update and do a full scan with these free malware detection programs:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish.Restart your computer and solve the outstanding issues. -
Run dll error loading C:\WINDOWS\WUIRDOD.dll
Error loading C:\WINDOWS\WUIRDOD.dll - this error message at start up. How can I install?
It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit. If you make a mistake, that's all.These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem. Also, I'd be suspicious of ideas that begin with the words "try." You don't need to try things, you need to fix things. You don't need to try ideas that might work, you must do something that will always work all the time.Here are the detailed instructions that protect you and solve your problem in the 'right' way.There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them. If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.It might be a removal of malicious software or an application not installed. The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it. Autoruns (see below) you get the elements no matter where it is.You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).
If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer. The msconfig program is not a Startup Manager, that's a troubleshooting tool. Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration. Just disable the display of a start-up error message should not count as a 'solution' to the problem.If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns. The problem can always be found in the registry well.Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.Here is a link to a popular registry backup tool:You can also use the Autoruns to find the element of start remains little matter where he's hiding. Autoruns does not install anything on your computer. It will display all startup locations where the reference may be then you can turn it off or remove it completely. Here is the download link for Autoruns:Run Autoruns.exe and wait that he at the end of the filling of the list of entries.When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information. You are really interested only a few sections.The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.Scroll through the list and look for a boot entry associated files in the error message.If you can't find on the connection tab, look in any tab.You can also click file, search to search for logon, or any tab for all or part of the name of the element.Right-click on the offending entry and choose Remove. If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry. If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.Given that your system has or has had an infection, follow up with this:Perform scans for malware, and then fix any problems:Download, install, update and do a full scan with these free malware detection programs:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish.Restart your computer and solve the outstanding issues. -
Error loading C:\WINDOWS\Nrayiquyiw.dll
So, I haven't used this computer over the years. I know he has been infected by a virus some time ago and has never been able to remove it. I ran all sorts of anti-Virus and Malware removal and removed a number of things. I ran CCleaner and fixed some issues here as well. But whenever I turn on the laptop, I always get this error at the time wherever the office upward. Error loading C:\WINDOWS\Nrayiquyiw.dll and I can't seem to find this error anywhere online. I'm almost certain that the virus is still in the computer. Can someone help with this error message?
I follow this method:It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit. If you make a mistake, that's all.These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem. Also, I'd be suspicious of ideas that begin with the words "try." You don't need to try things, you need to fix things. You don't need to try ideas that might work, you must do something that will always work all the time.Here are the detailed instructions that protect you and solve your problem in the 'right' way.There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them. If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.It might be a removal of malicious software or an application not installed. The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it. Autoruns (see below) you get the elements no matter where it is.You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).
If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer. The msconfig program is not a Startup Manager, that's a troubleshooting tool. Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration. Just disable the display of a start-up error message should not count as a 'solution' to the problem.If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns. The problem can always be found in the registry well.Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.Here is a link to a popular registry backup tool:You can also use the Autoruns to find the element of start remains little matter where he's hiding. Autoruns does not install anything on your computer. It will display all startup locations where the reference may be then you can turn it off or remove it completely. Here is the download link for Autoruns:Run Autoruns.exe and wait that he at the end of the filling of the list of entries.When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information. You are really interested only a few sections.The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.Scroll through the list and look for a boot entry associated files in the error message.If you can't find on the connection tab, look in any tab.You can also click file, search to search for logon, or any tab for all or part of the name of the element.Right-click on the offending entry and choose Remove. If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry. If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.Given that your system has or has had an infection, follow up with this:Perform scans for malware, and then fix any problems:Download, install, update and do a full scan with these free malware detection programs:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish.Restart your computer and solve the outstanding issues. -
What is this error? Error loading c:windows\mcycol40.dll the specified module could not be found
Windows XP is giving the following error message and there is NOTHING to be found anywhere on this subject. Help
RUNDLL
Error loading c:windows\mcycol40.dll
the specified module could not be found.
It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit. If you make a mistake, that's all.These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem. Also, I'd be suspicious of ideas that begin with the words "try." You don't need to try things, you need to fix things. You don't need to try ideas that might work, you must do something that will always work all the time.Here are the detailed instructions that protect you and solve your problem in the 'right' way.There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them. If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.It might be a removal of malicious software or an application not installed. The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it. Autoruns (see below) you get the elements no matter where it is.You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).
If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer. The msconfig program is not a Startup Manager, that's a troubleshooting tool. Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration. Just disable the display of a start-up error message should not count as a 'solution' to the problem.If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns. The problem can always be found in the registry well.Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.Here is a link to a popular registry backup tool:You can also use the Autoruns to find the element of start remains little matter where he's hiding. Autoruns does not install anything on your computer. It will display all startup locations where the reference may be then you can turn it off or remove it completely. Here is the download link for Autoruns:Run Autoruns.exe and wait that he at the end of the filling of the list of entries.When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information. You are really interested only a few sections.The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.Scroll through the list and look for a boot entry associated files in the error message.If you can't find on the connection tab, look in any tab.You can also click file, search to search for logon, or any tab for all or part of the name of the element.Right-click on the offending entry and choose Remove. If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry. If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.Given that you had or have an infection, followed with this:Perform scans for malware, and then fix any problems:Download, install, update and do a full scan with these free malware detection programs:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish.Restart your computer and solve the outstanding issues.
Maybe you are looking for
-
It is usually a router issue and IE can usually deal with it.
-
Re: Satellite L655-11 q - unable to connect to the Internet
Help. Yesterday, I bought Toshiba Satellite L655-11 q, which comes with no os, I installed win7 32 bit and when I connect my modem (motorola sb5101) he doesn't recognize him at all and when I try to connect it reports error 651 (modem reported an err
-
When you play call of Duty Modern Warfare 2, I get the 1000008e error code.
original title: Windows crashed when you play the game I got error when playing in game: Error code 1000008e c0000005 parameter1, b53137f4, parameter3, parameter4 00000000 a561a424 parameter 2.Error ID: 1003 It was happen every 30 minutes and 1 day I
-
OfficeJet pro 8500. Installe4d new cartridge HP cyan. Do not print this color
Installed a new HP cartridge twice. preformed cleaning cycles & alignment. Will not print cyan. Worked fine until I changed the cartridges
-
BB BOLD 9700 blackBerry smartphones
I want to use my phone to connect to my Gemini tablet, as I have no WIFI access at work. The tablet doesn't have Bluetooth and I need to set up my BB as a Hotspot, any ideas how that would be possible, would be greatly appreciated. See you soon.