Plant the unresolved issues with extensive troubleshooting... Help, please!

Hello community,

I am still trying everything to solve these problems, be it related hardware, software... Or both.
Here's an account a broad of disorders that I have known, and perhaps someone here who had similar problems can help out me!

Basically, first will not stop the freezing or crashing after loading a broader project (project file is about 25 MB) and a small amount of minor adjustments to the timeline changes are made. Usually, I have to wait about 5 minutes until I can start even work because he is responsible for all media (it's pictures of a marriage of 3 days, i.e. footage DSLR, home videos, audio files, video elements such as the burns film, etc.). After about 5-10 minutes of reluctant working (I'm afraid it will crash if I work too fast) it done inevitably anyway. This problem did not exist during the Assembly edit or any other less extensive editing in the past. I upgraded to first CC 2014 three months after using the CS6 for about 2 years and more.

  • Try to help out myself I allocated 13 GB of ram for first and while I use it I have no other applications open. I cleaned the cache of media and has tried to reduce the size of the project by removing useless content that is not in use. Also, I put my insights to reproduce the 1/4 of the resolution and try to keep the media in my bins defined on the detailed (as opposed to thumbnails) view. I'm not sure if the rendering engine is set on using CUDA, because when I go to the project settings, the renderer is grayed out. I'm sure that my GPU can't use CUDA in CC (but I used to be able to use it in CS6 I think... strange). The GPU driver is updated and current.
  • I have uninstalled/reinstalled CC PP, imported from a sequence in a new project (to reduce the size of the project significantly to 6 MB). I cleaned my Mac HARD drive (more than 10% is free). My external HARD drive is a WD Passport Ultra 2 to USB 3.0 drive with 1.2 to work free. When I run a comparison test on the disc it tops out at close to 90 MB/s read/write. I use my MacBook monitor + an external 24 "running through the thunderbolt connection. Maybe if I run it with the single monitor only MacBook could help free up some space of graphics processing...?

At this point, that I wonder what else he's doing... Basically, it seems to me that if the program crashes to cause effects that can not handle the GPU or something (transitions, film burns with blend modes, color correction, stabilizing of warp and little basis for audio cleanup)... I was pretty confident that my computer was more than capable of handling this type of workflow, but maybe I'm missing something...

If you read this thank you very much and I hope you can suggest something!

Turns out I can have solved my problems with a very simple solution:
Larry Jordan - Premiere Pro: Trash preferences | Final Cut Pro Training & Classes

I hope that it might help others if you have similar questions.

Tags: Premiere

Similar Questions

  • CODE 66 has when the update NET FRAMEWORK 4 with WINDOWS UPDATE can't update more far until the issue is resolved. Help, please... I almost tried everything.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    CODE 66 has when the update NET FRAMEWORK 4 with WINDOWS UPDATE can't update more far until the issue is resolved. Help, please... I almost tried everything. Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Take a look at this link and see if it helps-

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3adefda0-69f3-4075-96ee-e2c61bd599cc>

  • What are the known issues with Bravia HX-925

    Hello

    Please let me know the known issues with the HX - 925 Bravia Full HD 3D TV series.

    Thank you and best regards,

    Arun

    Hi ArunHX925!

  • Instill the 11 elements (mac) with OSX El Capitan worm. 10.11.4 puts icon on the screen, but then nothing, any help please.

    Instill items 11 (mac) with OSX El Capitan worm. 10.11.4 puts icon on the screen, but then nothing, any help please.

    I thought I would try the version test, but with the same problem, will not work.

    Any help please would be appreciated

    Concerning

    MP

    How to open third-party applications to developers not identified in Mac OS X "Mac tips.

  • cannot delete photos with indicator.  help, please.

    I can't delete photos with indicator.  help, please. Thank you. Dick

    Can't stop without context and details

    What version of the OS (you say OS X 10.8.5 - is that correct?) and iPhoto or PHotos?

    What has changed since it worked?

    LN

  • Invalid key, when I get the product I hit gete message: the product key is valid. Help, please

    I had xp on my computer, I bought a WIN 7 take ownership with a product key sealed in the box. make a backup with windows easy transfer to external hard drive.  When I enter the product key I get the message: the product key is valid.  Help, please

    Skip entering your product key Windows 7 and complete the installation.

    When you reach the desktop, click Start, right-click on computer

    Click on properties

    Scroll down to the Windows Activation

    Click the link x days before activation.

    Click on the link that says: "show me other ways to activate.

    Enter the product key

    Click next

    Select the Activation of the phone

    Click Next when you enter your key page

    Select your country

    Click Next, call the number listed

    Be sure to explain your situation to the Appeals Officer.

    Provide the installation generated when ID requested by the call agent

    They give a confirmation ID in return, enter it

    Click next to complete the activation.

    However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

    15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

    So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

    or

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us
    ----------------------

  • I posted a question can not find the question and or response. Help, please

    I posted a question can not find the question and or response. Help, please

    AFAIK, you can't share a catalog like this.

    The only recommended method is to store your images and catalogue on an external drive, you can alternatively plug in both computers.

    With today the external USB drives, the speed is still correct, and many users are satisfied with this solution.

  • I have the table of 3 columns A, B, C. I want to store the sum of columns A B in the C column without using the DML statements. Can anyone help please how to do. ?

    I have the table of 3 columns A, B, C. I want to store the sum of columns A B in the C column without using the DML statements. Can anyone help please how to do. ?

    11.1 and especially you have virtual column

    SQL> create table t
      2  (
      3     a number
      4   , b number
      5   , c generated always as (a+b) virtual
      6  );
    
    Table created.
    
    SQL> insert into t (a, b) values (1, 2);
    
    1 row created.
    
    SQL> select * from t;
    
             A          B          C
    ---------- ---------- ----------
             1          2          3
    

    Before that, a front insert - trigger

    SQL> create table t
      2  (
      3     a number
      4   , b number
      5   , c number
      6  );
    
    Table created.
    
    SQL> create or replace trigger t_default before insert on t for each row
      2  begin
      3    :new.c := :new.a+:new.b;
      4  end;
      5  /
    
    Trigger created.
    
    SQL> insert into t (a, b) values (1, 2);
    
    1 row created.
    
    SQL> select * from t;
    
             A          B          C
    ---------- ---------- ----------
             1          2          3
    
  • If I have a mask in Photoshop feather, save my work and then view in Lightroom, the mask is not good! Help, please?

    If I have a mask in Photoshop feather, save my work and then view in Lightroom, the mask is not good! Help, please?

    This is a known bug - see workaround in this bug report in the Adobe official feedback forum: Photoshop: blur Non-destructive for the masking does not record properly more | Community customer Photoshop family. In addition, please add your vote and opinion for the bug report. even though Adobe has acknowledged the problem, they can't fix it immediately. Each vote makes it somewhat more likely that they will prioritise a fix.

  • After importing the files in lightroom cc2015.2, they are all less exposed and developing the show exposure to-5. Help, please.

    After importing the files in lightroom cc2015.2, they are all less exposed and developing the show exposure to-5. Help, please.

    Hi paulw,

    For existing images whose exposure have changed, please select all and go to photo > develop settings > reset.

    For import next session, please follow the steps below:

    1. Turn off apply tone auto under Lightroom preferences settings
    2. Restart Lightroom and then import images again.

    Concerning

    Sarika

  • I need someone to the split screen with me to help design a navigation scrolling Parallax!

    I need to design a navigation and footer page similar to www.astonmerrygold.com tonight and need help!

    You can use the full rectangle with menu as well as rollover effects and apply the scroll on the menu. To the same rectangle footer can be used with content grouped for social icons and pin them.

    Thank you

    Sanjit

  • What are the security issues with a virtual machine?

    The question is in fact a need to install firewalls, antivirus etc. on the virtual machine or the protections on the host protect the virtual machine when it is connected to the internet?

    In General a Virtual Machine that has network connectivity is no different, then a physical Machine with network connectivity and the other must act accordingly.  In other words, a Virtual Machine is subject to the same issues that a physical Machine is when it come to be infected if connected to other physical or virtual systems and or Internet and appropriate precautions should be taken as appropriate and necessary.

  • Accelerated release of Firefox calendar is at the origin of the compatibility issues with our intranet applications - where can I find the terms of this annex, including the end of support dates?

    We are a University use an updated internal development of e-Learning applications which makes use of a framework rich client (ZK - www.zkoss.org). For reasons of compatibility with this application, as well as other general factors, we have standardized on FF 3.6 browser for all our desktop computers. Normally, we will review our browser selection once a year and make the changes/updates to compatibility level for 3 rd-party libraries we use and our own code, in order to address new developments in the browser market.

    However the FF of the new policy of difficult liberation our lives check. FF 6 came out just months after 5 FF. We perform an upgrade, we have to do a systematic series of tests, settings, changes etc. regression tests. The cost is not possible for us to do this every 3 months! So please can anyone point us to a clear release plan for FF that shows, for each version:

    a. Release date
    b. End-of-support date
    c. Release notes
    d. Compatibility in terms of HTML and Javascript/ECMAScript versions.
    

    https://wiki.Mozilla.org/RapidRelease/calendar

    https://wiki.Mozilla.org/releases

    New versions are will be released every 6 weeks, so until Mozilla announced they will do than support for a LTS version for business 'customers', you guys left to swing in the breeze as well as to be able to plan for the future with Firefox. I think that as long as the said decision is taken, support for Firefox 3.6 versions will continue. A 3.6.22 release is under development right now, probably for immediate release next week.

    As far as the end of support dates, as each new version is the version support ends for the previous version, with the exception of 3.6.x. currently Firefox 3.6.x and 6.0.x are the only versions that receive security updates. Firefox 4.0 and 5.0 is not 'supported' any longer.

  • My MacBook has two K'note 5.1.1 (1034) and 6.6.1 (2560). When I save a file of 5.1.1 or "export to 09' 6.6.1 for a USB key and opened it on my iMac with K 5.0.3 (791), the photos are fine but the text is garbled." Any help, please?

    These Keynote files have been created on an iMac with Keynote 5.0.3 some on the current machine. On trying to reopen now, after the transfer to the MacBook and back again (while resuming the current iMac to El Capitan for OS X 10.6.8), text in a title on each slide area opens properly, but text in other boxes, some with bulleted lists, has each character replaced with a small rectangular box containing the letter 'A '. with these boxes tightly overlap.

    More info: I found out that this problem only occurs with text in Helvetica Neue. If I select the truncated text and change the font, the text appears correctly in the new font. I tried to install a new copy of Helvetica Neue in the font book and turning off the old, but it makes no difference. Each copy of Helvetica Neue works perfectly fine in other applications. It is more and more a puzzle!

  • Have lost the ability to change the level of difficulty on the games of Freecell. It was there originally, but is now set to the hardest level? can anyone help please?

    Until recently, I was able to choose several levels of difficulty for Freecell card game using the 'Options '. Now there is no choice available under 'Option' or any other position. The game is stuck at the highest level with all combinations of 4. How can I get games with least difficulty IE 1 or 2 costumes? Please can someone help?

    Hello

    1. Since when are you facing this problem?

    2. are you aware of the changes made to the computer before the show?

    Method 1: Try to turn off the game by going to enable or disable the functionality of Windows and later the tower and check if that helps. Follow the link given below for the same thing.

    Enable or disable Windows features:

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off

    Method 2: Run the (SFC.exe) System File Checker tool to determine which file is causing the issue, and then replace the file. To do this, follow the form of measures the following link:

    http://support.Microsoft.com/kb/929833

    I hope this helps.

Maybe you are looking for

  • MacBook keyboard layout

    I would buy a MacBook in the site Web Apple us and then pick it up in an Apple Store in San Francisco. Is it possible to choose the Italian layout for the keyboard? Thank you!

  • Homescreen launchers

    I'm ready to test many of the pitchers available on the market House, but my question is, does a pitcher home affect my phone somehow as performance or something about the fact that even the "pitcher" ADW EX launcher yet is not in favor of multi-core

  • HP Pavilion g6: update to card Wifi

    Can you tell me which is the last card that I could update. Thank you

  • Adobe instead of Excel

    For Windows XP How can I configure my computer to automatically open files that I double click on with Adobe instead of Excel?

  • On Automatic configuration update 3 of 3 endless loop, blue error screen "Unmountable_boot_volume".

    I'm not techie so need very basic instructions of computer. My dilemma is that my laptop is stuck on an endless reboot loop after he was trying to do an automatic update of Vista. I get a blue screen that informed me that she "Unmountable_boot_volume