Play all does not not on media player 11

Similar Questions

• "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. »

  Hi all

  I copied a video to holiday on a Virgin DVD + RW but when I try to play on the same laptop where it was copied from, I get the message "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. "Any ideas please? I can normally play DVD pre-recorded ok.

  Thanks in advance.

  Hi all

  I copied a video to holiday on a Virgin DVD + RW but when I try to play on the same laptop where it was copied from, I get the message "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. "Any ideas please? I can normally play DVD pre-recorded ok.

  Thanks in advance.

  =====================================
  DVD Maker might be worth a try:

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
  (Windows 7 Home Premium / Professional / Ultimate / Enterprise)

• No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file." And the media player does not work

  Windows Media Player

  No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file."  And the media player does not work

  Reset the WMP.

  Step by step instructions are given here: -.

  http://www.mydigitallife.info/how-to-uninstall-and-re-install-Windows-Media-Player-12-WMP12-in-Windows-7/

• When I try to read Blu - Ray, it says "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. »

  Original title: Blu - Ray

  My computer can read blu - ray, but when I try to play one, it says "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. "How should I do?

  Hello
   
  The Blu - ray disc format is not supported in Windows Media Player. To play a Blu - ray Disc, you must use a non-Microsoft program that supports playback of Blu ray and a device that can play Blu ray discs.
   
  See the article mentioned below:
   
   
  Read a CD or a DVD in Windows Media Player: http://windows.microsoft.com/en-us/windows7/Play-a-CD-or-DVD-in-Windows-Media-Player
   
  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Why not Windows Media Player 11 does not recognize w4a files in the library list more.

  I have Windows XP Pro (SP3) with Windows Media Player 11. I had a virus wipe my hard drive (everything has been updated) and after reinstalling and updating everything, it no longer recognizes the w4a files, but it automatically plays them the OMP 11 if I click on the file in Windows Explorer.

  Before the accident, all the files on my computer w4a was included in the library. Now the entire albums, as well as individual songs are missing. In fact, now NO w4a file is listed. So my question is, why does Windows Media Player 11 recognize the w4a files?

  Neil

  Hello

  Method 1: I suggest you try the steps from the link below and check if it helps.

  a. close Windows Media Player.
  b. find the file of database on the computer that contains the entries of your library. In general, the library database file (CurrentDatabase_219.wmdb) is located in the following directory:
  (Drive :) Users/xxx(the user name)/Appdata/local/Microsoft/Media Player
  c. right click on the file and then click Rename.
  d. rename the file by changing its file .bak extension.
  e. start the player. When you do so, a new database of library file is created.
  f. press F3 on your keyboard to open the add to Library dialog box search for computers.
  g. click the Browse button to search for a folder on your computer that contains digital media files. Specify the location of the folder in the box look in.
  h. click on the search button.
  The player will search for digital media files and playlists in the folder you specify and add to your library. If you have your files and playlists stored in different folders on your computer, you may need to search for files several times, by specifying a different folder every time.

  Method 2:
  You may need to rebuild the database of Windows Media Player.
  Here's how:
  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:
  a. exit Windows Media Player.
  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.
     Note: You don't have to remove the folders that are in this folder.
  d. restart Windows Media Player.
  Note: Windows Media Player automatically rebuilds the database.

  Hope this information is useful.

• When I copy a CD in Windows Media Player 11 does not apply media information.

  With the XP sp3 operating system, I rip the CD purchased and Windows Media Player 11 does not apply media information. Either he gives and error saying that it cannot be done because I am not connected to the internet while I'm connected, or it can recognize my internet connection, but I have to do a manual search and manually apply the name of each track, even if they are present and order under each line I have to click to match the name of the correct track.

  It's so frustrating to have to fight manually for applied information on the media which is clearly presented, and after all, album art that shows correctly in the finder info media constantly refuses to fill in the library and I have to go to a separate Web site and copy and paste it in. Yes, he found elsewhere on the internet, with the help of the connection which was present all along!

  It's crazy, the info is already there! And why do I go online in any case the info is in the CD? This doesn't seem to be a problem with the previous players. Please provide a fix for this useless, frustrating dinosaur, waste of time, a process!

  Have you tried to delete temporary Internet files and the Cookies in Internet Explorer?

  If you temporarily disable your firewall software, which helps? This could be a third-party firewall, like Symantec, or the built-in Windows Firewall.

• Cannot open iTunes and not all the music files in Media Player

  original title: I can't open itunes and it worked only recently and for some reason any all my music files went to media player

  as the title suggests it is happening.  I tried to uninstall/install, safe mode and a few other things.  I'm out of options

  Hi Adaminoly,

   

  Thanks for posting your question in the Microsoft Community.

  I understand that you are unable to open iTunes and all music files replace the media player. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. you receive an error code or message?

  I suggest you right-click on any of the music file and click Open with, click Choose default program select iTunes and check the issue.

  For more information:

   

  Contact iTunes Support:

  http://www.Apple.com/support/iTunes/

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

• Why not play my Encore DVD in Windows Media Player v.11

  Game of my DVD properly in players and various other DVD software but not Windows Media Player v.11.  Most of the people I give my DVD to view them on Professional computers, which have only WMP on them.  Is there a way to build a DVD again, allowing them to play in WMP?

  Game of my DVD properly in players and various other DVD software but not Windows Media Player v.11.  Most of the people I give my DVD to view them on Professional computers, which have only WMP on them.  Is it possible to build a DVD again, allowing them to play in WMP

  You can always create a Flash "DVD. That you might be looking at the wrong place. Microsoft has carefully avoided any licensing MPEG-2/DVD and simply uses the libraries of other DVD software on your system, when no such thing is installed, it never works.

  Mylenium

• "Play" button does not work on Satellite L500

  Hello

  The title says it all... My 'play' button does not work. All the other buttons on the Panel works... Like power, next song, previous and silent song.
  I use the Satellite L500-12th, I had for 3 years now with no problems until today.
  Can I do to solve this problem?

  Which player do you use? Maybe Windows media player?

• Do not have media player.

  Original title:

  Running windows 7 64 bit

  Do not have media player. Can't see a reason why not that it is supposed to come with installed WMP. Can't seem to download WMP either, even if a window has suggested that v11 is not eligible for my version, but then wouldn't download the version that he finally recommended

  WMP is included in all editions of Windows 7, but is not activated [ready to use fact] for Pro / Ultimate Editions.  I guess you must have one of these editions.

  In all editions, this is the same WMP version 12.  WMP11 is not compatible with Windows 7 The following two procedures apply to all editions of Windows 7 and are not destructive - nothing is installed or uninstalled.

  1 to enable WMP12 in any Windows 7 Edition:- Control Panel, [view by - small icons, if necessary], programs and features, [left] Windows enable or disable features, multimedia features, set the check box, Windows Media Player , Yes, OK, Restart the PC.  It is now available for use [and will remain so despite reboots, etc.].

  2 on the other hand, if you have always wanted to turn off:- Control Panel, [view by - small icons, if necessary], programs and features, [left] Windows enable or disable features, multimedia features, clear the check box, Windows Media Player , Yes, OK, Restart the PC.

  - - - - - - - - - - - - - - - -

  The above applies to the normal versions of Windows 7.  If you have a regional special versions KN/K/N, then use this link WMP for editions N-K-KN - download Media Feature Pack - Microsoft Download Center [this download does not work for the normal versions, i.e. those delivered with already included WMP].

• Why not Windows Media Player is not up-to-date files on "my videos"?

  Windows Media Player on my Windows 7 Home Premium will be updated with the information of other folders, but not my main video library, "my videos". Anone can you please help?

  Hello

  Remember to make changes to the computer before this problem?

  Follow these methods.

  Method 1: Follow these steps.
  Step 1: Open the Windows Media Player settings convenience store http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooter

  Step 2: Solve the video issues in Windows Media Player and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  
  Method 2: you may also experience this problem if the database of the library have been damaged.

  To do this, follow these steps:

  Step 1

  a. exit Windows Media Player.

  b. for Windows 7: click Start, click Run, type % LOCALAPPDATA \Microsoft\Media Player , and then click OK.

  c. Select all files in the folder, and then click delete on the file menu.

  Note: You don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note:  Windows Media Player automatically rebuilds the database.

  Step 2:

   If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. If you run Windows 7, click Start, click Run, type % LOCALAPPDATA\Microsoft and then click OK.

  c. Select the folder Media Playerand then click delete on the file menu.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

• No video on mpg not files Media Player in WIndows 8.

  I have video files that have been converted to another format mpg. They play perfectly on my WIndows 7 PC. I use WMP and Movie Maker. I have a new PC with Windows 8. In one of these programs the videos play sound only. No error message. Do not know if I am missing a CODEC or all that. Any thoughts?

  It did not work for my case.   I ended up having to upgrade to the "Media Center" edition and then everything worked fine.    It was an extra $ 9.00.   I guess that some people do not use Media Player, it is decided that out of the packaging.

  Chuck

• The Stream.play () method does not work why?

  I want to create an application to switch streams and republish them under continuous flow unique to the remote server.

  In the first step, I tested "Livestream code" of the "Multipoint publishing example" p. 184 of "FLASHMEDIA SERVER 4.5 Developer's Guide ADOBE®" If ns.publish method is used. He managed.

  I try stream.play method now.

  I wrote main.asc code as in the Stream.play example (p. 162) of the 'the ACTIONSCRIPT Language Reference® to ADOBE® FLASH® MEDIASERVER 4.5 server-side", but I have a certain problem despite this.

  I try to spread on my local server (Uri - "localhost/studia") by two customers - OUT and my request for "Livestream" accordingly (with stream name "livestream2") and retraslate it to a remote server by using my "studia" on a local application.

  The connection between two servers (with application "on-line") appears in the Remote Server Admin Consol, but the flow of my local server do not come to her.

  Here's my main.asc script:

  application.myRemoteConn = new NetConnection();

  application.myRemoteConn.onStatus = {function (info)}

  trace ("Connect" + info.code + "\n");

  Respond to all customers

  for (var i = 0; i < application.clients.length; i ++) {}

  application.clients [i]. Call ("onServerStatus", null, info.code, info.description);

  }

  };

  Connect use NetConnection object remote server (the remote server works with other application wery well)

  application.myRemoteConn.connect ("rtmp://RemoteServer/live");

  Estimate of the server data flow

  application.myStream = Stream.get ("livestream");

  application.myStream = Stream.get ("livestream");

  If {(application.myStream)

  application.myStream.play ("livestream2", 0, -1, true, application.myRemoteConn);

  }

  The Stream.play () method does not work why?

  What I've done wrong?

  In this case, I recommend a mixture of solution...

  Something like that will be interesting to check:

  var tempSwitchingStream = Stream.get ("myswitchingstream"); create a stream live temp on the server local app...

  tempSwitchingStream.play (livestream1, 0, -1);      Subscribe to tempSwitching to livestream1... That is to say get the content of livestream1 in there... I can also switch to different streams inside... tempSwitchingStream will get the contents of the stream of //switched

  If (tempSwitchingStream) / / if there is

  {

  NS. Attach (tempSwitchingStream);  Subscribe to my net workflow to receive data from tempSwitchingStream

  NS. Publish (livestream, "live");  now flows net is get data from tempSwitchingStream, so publishing those data with the name "livestream" on the connection to the network... NET already know its NetConnection... See above

  }

  Did you get the point? I created a temporary stream that can pass the stream in its method of game and then I push this temporary stream to a remote server...

  However, it is tricky... Majorly, in most cases similar to yours, people write applications on the application of remote server to get the stream and he spend the pull in play method as described in the first method discussed...

• my computer says that the hlnfd on my plug n play devices does not or is not found. His original my computer to hang and I can't fix.

  my computer says that the hlnfd on my plug n play devices does not or is not found.  His original my computer to hang and I can't fix.  Any ideas?

  Original title: does anyone know how to do the hlnfd works on my windows 7

  See this. This seems to be a remnant of some malicious software

  http://www.bleepingcomputer.com/forums/t/520743/hlnfd-missing-driver/

• Spell check InDesign CC 'ignore all' does not work

  Is anyone having problems with 'Ignore all' does not work in the spell checker? I am repeatedly being asked to check the same word or an abbreviation over and over again.

  Just to be sure, it wasn't a result of hidden characters or other variables, I copied several blocks of text and spell check prompts for the same terms in the two blocks of text, even after clicking "Ignore all" for each word the first time through.

  Hi all

  Please report it as a bug using this link: feature request/Bug Report Form

  SJRiegel you can fill a feature request for the same.

  Kind regards

  OM