Play single track on iPad?

Similar Questions

• You can play a track backwards?

  I'm working on a project and I need to have a voice more play back on the track. I have here a way to reverse a single track in a multitrack recording?

  I'm not too familiar with logic, but I think it should work:

  Make sure that if you go to Logic Pro X > Preferences > advanced tools, 'Show Advanced Tools' is checked.

  Double click on the track you want to listen inverted so editor opens upward, to remain in the file of the Editor tab and then go to functions > reverse. The shortcut is Command-Shift-R.

• The volume when a single track editing comes down lower than multitrack playback. Why the two do not match?

  When I click on a single track in a multi-track file to change, the track only plays not returning to the same volume as in the case of multi track.  If I increase the gain of the single track, it makes a permanent change.  I am a newbie on this program.

  Volume of multitrack playback depends on the parameters of mixer, and also if there is no gain in any effects you use. Reading Waveform depends only on your volume control setting - the software will not influence it in the slightest. The only other thing that will make the difference is the way you control pan set up - the default condition will give a 3dB reduction level in multitrack, unless you compensate with the master fader.

• I like to play games on my ipad.  The games want to go on facebook, but hen they do on behalf of my wife happens instead of mine.

  I play games on my ipad.  When the game asks you to go to my facebook account, it brings me to my wife's facebook account.  Any suggestions?

  Delete the account of your wife of the Facebook app seriously, he'll probably the first account created in the Facebook application. If bring you it in the right order, it'll do what you want. Then the games will go to your account, oh dear.

• I can share a single track that was sent to me in another country?

  and, it's the normal process, connect it to iTunes and buy the track.

  Apparently the Albums only work if you are in the same country, for some reason- but what about a single track?

  I think it's very strange, but I need this to work.

  No, the iTunes store does not border or gift sales.

  TT2

• iPhone 6 s more. The music will not play an entire album. Just of repetitions the first track.  How can I get it to play all tracks in order?

  iPhone 6 s more. The music will not play an entire album. Just of repetitions the first track.  How can I get it to play all tracks in order?

  In-app music, press the "mini player" (the narrow ribbon at the bottom showing the song that is playing).  Which opens upward from the view of work full screen of the song being played - down at the bottom of this screen are icons for shuffle and repeat, press Repeat until the gray background disappears.

• Can someone tell me how to change the random setting when playing iTunes on my iPad Pro?

  I am playing iTunes on my iPad Pro and may not know how to change random playback settings.  I see the taskbar shuffle just above the playlist with a shuffle icon.  But touching this icon seems truly random for a different song rather than change the setting.  Thanks for any help you can offer.

  Hey zip66215,

  I understand you want to learn more about the playback controls for the application of the music on your iPad. I can help you with that.

  Generally, you will begin to see a list of your music and when you play a song, the mini-Player will appear at the bottom of different tabs of the music app. If you type the mini Player, it will bring to the top of the current playback with all different game controls screen. From there, you can repeat and shuffle settings. Take a look at the screen shots to learn more of what I am referring to the as well as research and the link below.

  Play music
  http://help.Apple.com/iPad/9/#/iPad0136c954

  

  Let me know if this clears it for you.

  Take care

• E280 v2 plays a track and returns to the menu music

  Hello.  I bought a v2 e280 a few weeks ago, and the unit worked fine until yesterday.  I use Windows Media Player 11, and XP v2 and WMP 11 both recognized my e280 each time, until yesterday.  The problems are many, but the main thing I notice is that when I select a playlist for playback, my e280 will play a track (usually the first one) and then he comes back to the music menu.  When I try to pass through the screens of reading to see the next song, I won't get it even the screen (it justs gives options Timer, EQ, and album art).  Forward > | button has stopped working properly as well.  I have the old firmware 03.01.11A and tried to update the firmware.  My PC stopped recognizing my e280 yesterday as well but I couldn't understand how to upgrade the firmware without this recognition.  Now the power button for 15-20 seconds just seems also to power on then off.  Oh, and I removed all the tracks in my GoList, thinking that maybe the problem.  But that solves nothing.

  And when I say it worked fine until yesterday, I mean it sync with WMP11 as a breeze, addition of playlists and titles I had created in WMP11, read playlists with random and repetition, and had no problem with the music downloaded on Amazon or CD.  Until yesterday.

  Did you add any music or do something different with the unit yesterday?

  The 1st thing you'll want to do is update the firmware. This can solve the problem in its entirety, but even if it is not it will make it easier to deal with. In addition, the update adds a nice touch and bug fixes. You can read "what's new" in the post firmware.

  Check out this post for instructions on upgrading your f/w. There is a link to the version firmware inside post. Let us know what has changed or is the same, after that, you (and also if you have said or done anything, just before this happened that could have caused the problem).

• Message from blackBerry Smartphones "couldn't play the track you requested.

  Since switching to the Priv of BB, I can't listen to my fixed voice messages that are sent by e-mail in the form of a wav file.  I get the message, "couldn't play the track you requested.

  Search store to play wav player.

  Here are two of them who could do what you need:

  https://play.Google.com/store/apps/details?ID=org.videolan.VLC

  https://play.Google.com/store/apps/details?ID=com.AIMP.player

• Add effects to a single track?

  How to add effects to a single track?

  (Setting for example the colors of foreground touch the bottom)?

  What you can do, it's all the layers except the nest bottom.

  I just tried it to make sure I understood it correctly. I took a picture and placed on track 1. Then I placed the same image on track 2. I have cropped the top for display on the left and bottom half to show on the right half.

  I put a three track adjustment layer and added a fast color corrector to make all too red.

  Then I selected 2 and track 3, right click and they nested together.

  Now that one side was too red, because the adjustment in a nest layer changes only the clips inside the nest.

• Rotate a single track?

  Hello:

  I've created a brush which is supposed to mimic the seam and I wish I could turn a 'point' or stroke at a time...                              (I have rasterized form)

  I used the Ctrl + click on the thumbnail of forms to make a selection and then selection > modify > contract

  and then I went to the palette drawn, and in the drop down / fly on the menu I chose to create a track work and then...

  I right click on the thumbnail of paths of work and chose: trace the path > brush (chose my custom brush)

  I manipulated the path as much as possible create curves to the need but...

  I still need to change stitches...

  If I remember correctly, I think I read somewhere that I can use a Marquee Selection tool individual brushes (which are part of the same path) to rotate or move/move in general

  However, I can't seem to make it work for me... so, I think I forgot a step or I'm totally wrong.

  I can turn a single track? is there a way to "separate" as in Illustrator or another kind of creature Ps who will help me to do what I want to do? I'm always looking for the manual, but I'm probably asking the wrong questions.

  

  above is an example of what I'm trying to explain... all dashes are on a path, but I would like to be able to turn one at the time (as in the red circle)

  is this possible? I tried to paint 'em everything manually, but it is not eventually look nice at all.

  your time and efforts and alternative ideas are greatly appreciated.

  hope your good and having a good day/evening

  You're confusing workflow to AI and PS. Select and transform would only work in artificial intelligence, and even then only after expansion the appearance to convert the race to fill objects. PS I had simply used the layer style dotted on a duplicate of the layer outline and resize it accordingly...

  Mylenium

• Dual audio video play both track on WM 12 drive.

  Hi, I download a movie in avi havening dual audio format. When he plays through Windows Media Player 12, he plays the two speakers. There is no option, I got to choose the single audio track to play. in VLC media player it is option for it, I can change the sound track of what I want.

  
  

  How I can do this is in Windows media player 12.

  Hi Kishan.Gupta,

  Thank you for using the Microsoft Answers forums.

  I suggest you to contact the site where you purchased the movie to download, to see if they have a download that is compatible with Windows Media Player.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• Single-track Crossfade

  What I'm trying to do I think would be simple, and we have a very old audio application that works fine, but I have found no way to do it easily at the hearing.

  So I have an exactly 01:00 min audio file.  It begins with music that disappears in the ambient noise: 20, then clapping and applause fades to ambient to: 40 after the next play begins.

  So I'll cut the applause.  I select from: 20 to: 40 then make a cut.  So now the file is long, to the point of cut to 40 seconds: 20.  I can do an envelope to get the same levels, but often it is more or less rustle, noise, etc.  The sounds of ambient silence just different, so I want to go through basically melted to the change point to smooth.

  I want to have an order now makes a fade chained with just as an audio track.  I said essentially manual fade chained, specify a duration of ms and it performs a crossfade with just the single file.

  Example of how it works: the exact edit point, if I choose 50ms, it goes 25 ms before the point editing and done a linear fade, 25ms after the edit point and a linear fades and then "mergers", the two fades together.  The new file would be 40sec - the fusion 25ms so now it's 39,975 seconds.

  I can pull this off in a multitrack editor with the same file on 2 tracks, but it's crazy.  I hope it's simple, I have not found just the right option... any help would be greatly appreciated.

  Not with a fade, no. This does exactly what it says it does.

• Automatically play audio books on iPad

  Everytime I open an audio book on my iPad 4 it starts playing automatically. Is this a bug or a feature? And how he stop? I use my iPad in my class and it's really annoying - and unprofessional!

  If you open an audiobook, it will start to play, it is not a parameter for iBooks to stop what is happening

• I can't play the tracks in Audition CS6

  I hear nothing in hearing CS6. Everything is still fine except that there is no sound. My computer and the headset is OK, I can listen to music on any software, but for the AU.

  Here is the screenshot:

  .

  I don't know how to fix it.

  Please help me!

  Thank you very much!!!

  In fact, if the transport moves correctly (IE when you press the Play button, the cursor moves and recording meters), then the thing you should check immediately which is in Edit > Preferences > Audio Channel Mapping, that there is a valid selected channels, and then in the track pair or master routing, that these channels are selected - and that if the captain you look that the track is correctly routed to it. But, given the fact that we can see a meter reading at the bottom of the screen, I guess that the signals are routed correctly to the mixer, and everything you need to establish what they do to the channels on your audio device.

  If they are, and you still hear nothing, then you need to check all the controls on the device itself. If it is the internal audio device make sure that the volume is not zero. Also, if it's 10 of Windows you use, you will need to reset the volume and move it forward again, especially if you have plugged or unplugged the headphones, as Windows has now got really stupid on this subject.