Player Code VITC/CTA time analog PCIe with ESXi

Similar Questions

• Does anyone know how to unlock region on a CD-ROM DVD player codes?

  Does anyone know how to unlock region on a CD-ROM DVD player codes?  I have this stupid Windows 8 and so far I only have PowerDVD. But I also have windows media player.  I am trying to get Windows Media Player to access the DVD that I used for Windows 7, but whenever I stick one in this computer stupid, by default it starts to Power DVD.

  According to the power dvd faq: "the limit is in accordance with the requirements specified by the major movie studios. PowerDVD allows you to change the codes of the region up to 5 times (also depending on your DVD player) and then automatically record fifth region code setting. Subsequently, you can only play DVD titles in the fifth code region or non - CSS all regions DVD titles. Area code will remain locked even if you reinstall PowerDVD. »

  Is there by chance a legal way around this? I wish I could watch my DVDs on my laptop when I want without locking on my other. I don't do anything illegal as piracy of DVDs, I just want to be able to watch them. Could someone please? Thanks in advance.

  Use another program like VLC player or Potplayer.

  It's by design, not much you can do about it. He was there for Vista/XP

  Otherwise, you will have to Flash a hack of firmware for this DVD region

  Go to default programs and change the format for windows media player

• How to structure the DMA buffer for SMU 6341 DAQ card for analog output with different frequencies on each channel

  I use the outgoing/incoming analog DDK with the DAQ 6341 SMU map.

  The examples, for example aoex5, show a single timer (method outTimerHelper::loadUI), but the example shows the DMA loaded with same size of vector data.

  There is a comment in the outTimerHelper:call rogramUpdateCount, which implies that memory sizes different pad per channel can be used.

  (the comment is: switching between the sizes of the various buffers is not used)

  Nobody knows what should be the format the DMA buffer for data from multiple channels with different frequencies?

  For example, we want a0 with a sinusoid at 1 kHz and a1 with a sine wave of 1.5 Khz.  What looks like the DMA buffer?

  With the same frequency for each channel, the data are interleaved, for example (ao0 #0, ao1 #0; ao0 ao1 #1, #1,...), but when the frequencies for each channel is different, what the stamp looks like?

  Hello Kenstern,

  Data are always intertwined since each card has only a single timing for each subsystem engine.

  To AO, you must specify the number of samples that will be released to the AO. You also specify the number of channels. Because he didn't is that a single engine timing for AO, each AO will be channel will be updated at the same time to update clock tick. Data will be interlaced exactly as shown in the example because each channel AO needs output at each tick of the clock to update. The data itself can change depending on the frequency you want to copy.

  kenstern wrote:

  For example, we want a0 with a sinusoid at 1 kHz and a1 with a sine wave of 1.5 Khz.  What looks like the DMA buffer?

  With the same frequency for each channel, the data are interleaved, for example (ao0 #0, ao1 #0; ao0 ao1 #1, #1,...), but when the frequencies for each channel is different, what the stamp looks like?

  In your example, you must come with an update rate that works for the two waveforms (sine waves of 1 and 1.5 KHz). To get a good representation of a sine wave, you need to update more than 10 x faster than your fastest frequency... I would recommend x 100 if possible.

  Update frequency: 150 KHz

  Channels: 2

  Then create you stamps that include complete cycles of each wave you want to produce based on the frequency of update. These buffers must also be of the same size.

  Buffer 1: Contains data for the sine wave of 1 KHz, 300 points 2 cycles of sine wave

  Buffer 2: Contains data for the sine wave of 1.5 KHz, 300 points, 3 cycles of sine wave

  You can Interleave them as before. When the data are performed through the ADC, they are out different sine waves, even if the AO channels are updated at the same speed.

• Response time of PCI-6602

  Dear users of the forum,

  I use a Counter/Timer OR PCI - 6602 for send TTL signals to another device in our laboratory. I send the signal every ~ 1-5 ms, but this time is not fixed (it depends on some other process that I do in my program of LabVIEW), so I can't use a continuous waveform.

  So, I wrote a short test program to familiarize yourself with the PCI-6602 (see attachment).

  If I send a pulse, it seems I can do this just about every 14 ms (at least this is calculated with the tick counts lag which is not very accurate; but to count the pulses with a meter gives almost as much time). So, it seems that the PCI-6602 has too long a response time for my application!

  Can someone tell me if he made the same comment? Either I use the bad vi/treat the PCI-6602 in the bad sense? If Yes, what should I do to make my small test program and finally my main program faster?

  I would be recognizing all the help and the comment!

  partial81,

  I have another idea for you to try.  Starting the 6602 being the operation that takes the most time I wrote an example which uses a trigger to start to generate the impulse and puts in place the meter to retriggered.  Basically whenever you issue a start trigger, the meter will generate a pulse.  I then use a digital line on the 6602 to generate this trigger to start (I use PFI0 and Port0/$line0 which is actually the same line in the material).  For the reenclenchee generation, wait until what is not useful, so I replaced it with a 1 ms wait.

  Can you try this and see if it works better for you?

  Dan

• I am trying to download images from a compact flash player map, but every time my computer shows i/o device error. What does that mean?

  I am trying to download pictures from a card compact flash player map, but every time my computer shows i/o device error. What does that mean?

  Hi Richard,

  1. what version of Windows you are using on the computer?

  2. have you checked if the problem persists in a different USB port and in another computer?

  3 - is the card compact flash not detected in Device Manager?

  A Secure Digital or SD memory card is a device of small portable storage usually used on a digital camera or camcorder, cell phone, or computer system. When you use the card, you may sometimes experience an IO error. The term "i/o" is refers to an input/output error and may involve the SD itself card or the card reader you are using.

  Try these methods:

  Method 1: Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Eject the SD card in the card reader and check the writing on the side protection tab. This tab should be in the up position; otherwise, you will not be able to save all data on the card. Also check the connection between the computer and the SD card reader. If the card reader is not properly connected to the computer, you will receive error messages when you try to use the SD card or your computer does not recognize the card.

  Response with more information to help you. Back to us for any problem related to Windows. We will be happy to help you.

• Cannot change region on Windows media player code

  How can I change the region of my computer for windows media player, it says I have 0 changes left & im unable to change it back, all useful advice? I didn't know that it was restricting the number of times where I could change my region on my Media Player

  Hi Jessa7382,

  Thanks for posting your query in Microsoft Communities. The problem description, I understand that you can not change the region on Windows media player code. Provide the following information for a better understanding of the issue:

  ·         What version of the operating system is installed on the computer?

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         Are you referring to Windows media player DVD region code?

  If you are referring to the DVD region code Windows media player, follow these steps:

  (a) click Start, type devmgmt.msc in the start search box and press enter.

  (b) developing internal driver DVD and right click on the sub element and click Properties and then click on DVD region.

  (c) in the DVD region, select a geographic area and click Ok

  Note: You can change the DVD region settings maximum 5 times.

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with per

  I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with permission. ?

  You can repair it yourself. I have a screenshot guide. You use app the Mac Terminal and a python (.py) script that comes with the recovery of the license for the Mac package.

  Don't forget to leave a space after typing sudo python and note that your password will not display any points. Simply enter it blind.

  Start 11 Message and take your time. It does not work. Layout error 150:30 opening Photoshop cs4 on Macbook Pro

  Gene

• How can I connect an Apple TV to an analog TV with 2 RCA Sockets?

  I have an analog TV with 2 jacks RCA - one for audio and one for video. Can I connect to an Apple TV box? Thank you.

  Maybe you should try to buy this part, just connect the red plug if your TV does not have one. Here is the link: B01F77KXC0/ref = sr_1_3 https://www.amazon.com/VAlinks-Composite-Transmitter-CONVERSION-Transmission/dp/? ie = UTF8 & qid = 146898...

• Satellite L20 260 won't boot to the top, every time it freezes with no reason

  Hi all

  I have a problem with my satellite of sad, after 3-4 days I installed a new operating system (tried with XP SP2 and Kubuntu) system does not boot to the top, every time it freezes with no reason, the only way is to perferom a new installation of the OS. What is a hardware problem, perhaps related to the RAM or HARD drive?
  x 10, Daniele.

  Hello

  It's not easy to tell if the problem is software or hardware related.
  You must install the OS from the Toshiba Recovery CD and again test the functionality

  If the laptop won't boot again freezes immediately after that installation of recovery CD, and then it could be a hardware problem.
  You can try using MemTest 3.5 tool.
  It checks the memory of a malfunction.

• Several analog inputs with different configuration differential/CSR

  Hello

  Can anyone tell how to measure two analog inputs with different configurations using a USB-6009?
  I am aware of the syntax for create virtual channels for the channels DAQmx create virtual so I created two strings using Dev3 / ai0:1 but I would like the first string of the CSR and the second to be differential.
  So far I have found no way to specify the configuration of the separate channels.

  Any ideas much appreciated!

  Jack

  JackT wrote:

  I prefer to use the 'low' level vi is therefore always curious to know if there is a way to set the configuration using the their.

  It should be like this:

  

• time of release with daqmx

  Hello

  How can I set the time of liberation with DAQmx?

  In general, with a single DAQ hardware, the two signals are connected at the same time and the acquisition time is a function of the sampling frequency and number of samples read. For example, with a sampling rate of 1000 samples/s and 50 samples, the acquisition will be 50 msec. You then get a returned array if you wanted to watch a single signal by iteration of the while loop, it is simply a matter of indexing the specific channel to the table. You must set the mode of continuous sampling to avoid gaps and precise timing. Using two separate tasks and switching back and forth would add a lot of overhead to close/create tasks and you have little control over this period.

• my media player 2002 sp3 xp time movies without picture.we can here but do not see it. How to solve this problem

  my media player 2002 sp3 xp time movies without picture.we can here but do not see it.  How to solve this problem

  Hi thomasbowyerRR,

  ·         Did you do changes on the computer before the show?

  ·         The question is limited to any particular video?

  ·         He has already worked?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Resources for the resolution of problems in Windows Media Player

  Method 2: Update the latest drivers for the video card and the check.

  How to manage devices in Windows XP

• Windows media player will not play a video file with a .zip extension

  Windows media player will not play a video file with a .zip wish.  What can I do to let him play?

  I checked and I have the latest version of windows media player.

  A .zip file is not a video file, it is a compressed file. Extract the video file in the zipped file.

  How to extract files Zip on Vista
  http://www.ehow.com/how_4913615_extract-zip-files-Vista.html

• After changing the motherboard in my PC the device software windows 7 cann't be activated. I tried many times to speak with the service the customer but failed.

  After changing the motherboard in my PC the device software windows 7 cann't be activated. I tried many times to speak with customer service through automated phone system, but failed. Now what should I do.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  --------------------

  Windows 7 - version comparisons:

  http://Windows.Microsoft.com/en-us/Windows7/products/compare-editions

  MS Windows 7 store price:

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  --------------------------

• How could I concat a time as hh with an earlier date

  How could I concat a time as hh with an earlier date as

  Select to_char (to_date (sysdate) |) (' 08:30 ') of the double

  and the i could convert this time and the date in this format, 'dd-mm-yy hh:24:mi:ss' love

  Select to_date (to_char (to_date (sysdate) |)) (' 08:30 ',' mm-dd-yy hh:24:mi:ss') of double

  Dear Sir

  Try,

  SELECT TO_DATE(TO_CHAR(SYSDATE, 'DD-MON-YYYY') || ' 08:30:24 AM', 'DD-MON-YYYY HH:MI:SS PM') FROM DUAL;
  

  Manu.