Dead with ISE server access

Similar Questions

• Guest access with ISE and WLC LWA

  Hi guys,.

  Our company try to implement access as guest with dan ISE WLC with the local Web authentication method. But there is problem that comes with the certificate. This is the scenario:

  1. the clients are trying to connect wifi with guest SSID

  2. once it connects, you can open the browser and try to open a Web page (example: cisco.com)

  3, because guests didn't connect, so this link redirect to "ISE Guest Login Page" (become): url

  https://ISE-hostname:8443/guestportal/login.action?switch_url= https://1.1.1.1/login.html&wlan=Guest&redirect=www.cisco.com/

  )

  4. If there is no Login to ISE not installed comments Page, no reliable connection of message message, but it will be fine is they "Add Exception and install the certificate".

  

  5. once the Guest Login Page will appear and you can enter their username and password.

  

  6 connection success and they will be redirected to www.cisco.com and there pop-up 1.1.1.1 (IP of the Virtual Interface WLC) with the logout button.

  The problem occur in scenario 6, after the success of the opening session, the Web page with the address and the error of certificate ISE IP to 1.1.1.1 is appear.

  

  I know that it happened when you can has no Page of Login of WLC certificate...

  My Question is, is there a way of tunneling WLC certificate to EHT? Or what we can do for ISE validate certificate WLC, invited didn't need to install the certificate WLC / root certificate before you connect to the Wifi?

  THX 4 your answer and sorry for my bad English...

  Do not mix WLC with ISE comments Portal local Web authentication. Choose one or the other. I suggest the portal + WLC CWA.

• Access the SMB storage using esxi host and manage with MS server 2008

  Hi there, I know the subject line can be confusing, but I didn't know how to explain what I need in the line object in such a short sentence.

  in any case, I have a storage device SMB, a Promise VTrak M610P, which is attached to a blade server 1U HP through interface channels double Ultra 320 SCSI host. I can't configure the VTrak as a NFS, the only way to access logical drives is connected to a server via the scsi channels and using the operating system to share the drive and the shared disks.

  I would use a server blade with dual ultra 320 SCSI host interface channels and connect the VTrak to this server blade. Then I would install ESXI hypervisor OS 5.5 to this server blade. I want to know is if the ESXI operating system will recognize the logical drives and if I create a virtual machine with MS server 2008 and see if the virtual machine detects logical drives, so that I can share the drives? I hope that I'm supposed to and if I'm not, please let me know what makes no sense, I will do the best to explain it better.

  Thank you

  Andy

  So it turns out that there seems to be something wrong with vClient when you add a hard disk (virtual disk) to a virtual machine of size greater than 4 TB. Article VMware KB: value of range error message when you add more than 4 TB capacity discs in vSphere Client describes this if you encounter this problem, add the hard drive via vSphere CLI, CLI power or vmkfstools. So this seems to be a known issue on vClient. What I ended up doing was using vClient, creation of hard disk, adding to the virtual machine (size of the hard drive is to 5.45) and when I would get the error message on the DiskCapControl out of reach, I would just click OK and then finalize the creation of the hard drive on the virtual machine. Once the process is complete, I selected the virtual machine and noticed that he indeed added a new HDD size 5.45 TB even if he's complained about it. I pulled to the top of the virtual machine with windows server 2008 R2 installed and was able to create a new disk under windows and set it up as a shared drive on the network. Looks like vClient must be updated by VMware and correct this bug, if it's a bug that I think. Thank you for the help vervoort!

• ISE Server - query of multiple networks

  Hi guys

  We intend to deploy a Cisco ISE server to handle NAC for 300 users (Windows, WYSE, phones Avaya and HP printers). DHCP is running on the domain controller and the ISE interface Layer 2 visibility of all of the network segment management.

  We received an additional amount for a dedicated/completely separate switch VLAN which provides unlimited Internet access. It would be connected to a third-party router connected to the Internet, allowing connections directly on the internet. Indeed, it is a completely separate network of a single VLAN and Internet access.

  Is it not possible to manage the security of the ports for that VLAN from the ISE Server? If so, the server ISE would need an additional NIC configured in the VIRTUAL Internet LAN subnet?

  Basically, I wonder if a single ISE server can be used to manage 2 totally independent networks. The Internet would not use AD authentication and access would have to grant manually on a case by case basis.

  Thank you very much

  M

  Just to clarify, ISE has NO need to be Layer2-adjacent to clients to work. Only if you use specific profiles of the probes is this useful ever. Has no use when you perform the validation of the mac addresses or 802. 1 x.

  As for your question, yes ISE can manage the addresses of mac validation by the ex. say requiring access to your 'Internet' VLAN and your internal VLANS at the same time. However, it is not made with the 'port security' switch feature, but rather by entering the mac addresses that need access to your server to ISE and using the "group" you put them in ISE, in ads a condition when the permission access to ISE.

• ASA 5525 X Anyconnect configuration with ISE 2.1

  I have a new deployment of ISE 2.1 which is used only for the management of the devices at the moment.  The intention is that it will serve as radius for authentication of our VPN server.

  5525 x is a brand new ASA runs the 9.4 code.  I want to configure VPN on the SAA strategy so that each user is assigned a DAP based on their Department.

  I already have the designation of the Department for user accounts assigned in AD through a group membership.  I don't know how to get ISE to belonging to a group at the ASA so that she can associate the user based on this correct in RAP group membership.

  I succumbed to determine how this is supposed to work.  Thanks for any help.

  @Jonathan Harrison ,

  Normally we authenticate and authorize users and then push DACL or allow connection from ISE etc. of such conditions profiles that check results Posture or parts constituting the identity of the user (such as AD or another external identity store belonging to a group).

  There are a couple of good guides to do so, including detailed examples:

  https://communities.Cisco.com/docs/doc-68158

  http://www.Cisco.com/c/en/us/support/docs/security/Adaptive-Security-app...

  http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...

  While they focus on the case of use of Posture, they can be adapted to add other uses. For example, ISE registration condition may be the result of not only a Posture check also membership in a given group or another if you make it a State.

  I do not think we can specify to the ASA to call a given font of DAP like Hostscan module cannot be used at the same time that the module ISE Posture. However, you should be able to accomplish just about everything you used to depend on the DAP with ISE Posture Module AnyConnect (assuming you have AnyConnect 4.x Apex licenses).

  If you want to stick with the ASA DAP model, you can forgo using policies and module ISE Posture and instead create an authorization profile (result) to send the ASA, a pair of RAY - V based on a correspondence (in the authorization of the ISE policy) with the ad group. He is a "Cisco-VPN-3000" A - V called "PIX7x-members-from' that can be used in ASA dynamic access policies. You can see (and all other pairs A - v supported buy ISE) here:

  https://communities.Cisco.com/docs/doc-67894

• Cannot use RDP with Windows server 2008

  Original title: a user cannot RDP

  Hello

  I have a windows 2008 R2 server with 5 licenses of Terminal Server. I set it up so that users can RDP to the server using RDP and access other machines via VNC, it's not connetced to a domain or whatever it is.
  All users can connect using any OS - Win XP, Win 7, but a user cannot get to their place of work - I can connect from home, of Germany, etc. using the same user name and password, but they can get on the server but their access is denied.
  They can telnet to the IP address but can't.
   

  Hello

  Thanks for posting the question in the Microsoft Community!

   

  You have any question using RDP with Windows server 2008.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

   

  If you need any other assistance, let us know and we would be happy to help you.

• Synchronization with a server of VI

  I currently have a server / multi-client application I implement with server of VI in LabVIEW 8.6.1.  Call to the server to execute different screws to store/retrieve/process data and the screw store data in files as well as globals function, i.e. an uninitialized moving records within a while loop.  I have a few questions about this implementation:

  1 are the calls made via VI server synchronized by VI Server; in other words, not realizing the reentrant Server VI VI never will launch multiple instances of the VI on the server system (I won't for obvious reasons)?

  2. I currently use some of the screws in my app server as static screw and also allow others to call in some of them from remote hosts via the server of VI, and I am concerned about the integrity of the data within my service globals (I took the precaution of open handles for all THE screws I share with VI Server so that they never go out of scope to be used as static or not).  Is this bad?  If I used only the VI server calls in my server application, it would be better (instead of using the 'shared' statically screw)?

  3. when a remote client is called on the server via a VI server, what happens when the VI is busy?  Does my remote call via an error call-by-reference node, or it fortunately waits his turn until the VI can be accessed (assuming that the #1 question is that one instance can never be executed).  I do have several systems to check the conditions of race.

  4. I use this implementation of VI server between Mac and Windows, do I need to be careful (in addition to the obvious path problems)?

  Thank you!

  -Danny

  TarantulaDiaz wrote:

  not realizing the reentrant Server VI VI never will launch multiple instances of the VI on server system?

  Only if it's a LIVING.

  In addition, even if it is reentrant, the VI server will not open multiple copies unless you set the flag in the options of the Ottawa Valley Railway (you can see the exact value using the primitive).

  If I used only the VI server calls in my server application, this would be better?

  I prefer the static approach for three reasons:

• Windows Mail is not interacting with the server.

  When Windows Mail (WM) is open, it will download 2 of each incoming e-mail.  Conducted a comprehensive analysis of the system, no problem.  Talked with our server provider, we ran the test emails to see if WM was interacting with the server and it is not.  Is also not to keep my ID and password to log on the server. Y at - it an update I missed it to avoid these problems?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  It causes a frequent there have new antivirus scan program messages.  Uninstall your AV program and reinstall without any mail analysis feature.  You will be just as safe.

  Another common cause is to have two e-mail accounts, referring to the same mailbox.  The send/receive operation can access two accounts at the same time and both can download the message even if they both refer to the same mailbox. Brian Tillman [MVP-Outlook]

• How to connect SQL company database with BES Server

  Hello

  I am new to this concept, how to access SQL database via BlackBerry App. Can I access data using BES, please explain. What are futures contracts, I can use when I install BES on Enterprise Server.

  You can find more information on this topic by using the search function.

  BB does not provide a jdbc driver, this means that you will need to use a server as middleware between SQL and BB component.

  How communicate with this server, it is to you, send commands sql as strings, use a Web service, or something else.

• Cannot open the URL of the CWA with ISE

  Hi people,

  I have a problem when you perform the CWA with ISE so that I can give you access to the network for the guests.

  Everything is fine except the URL of the CWA: when guests, open Explorer and enter a domain name after you have connected the SSID, they will be redirected to the URL like 'https://hostname.demo.com:8443 / guestportal /... ". " which begins with the hostname of the ISE and the domain name of the ISE, but for us, we have not any announcement and the LAN DNS for our network so that we cannot translate the hostname.demo.com in the IP address of the ISE, so can I just change the URL type of intellectual property like"https://10.10.10.70:8443 / guestportal?

  Screenshot of an attached screenshot (sorry).

  Basically it's in the authorization policy, allows you to use a static DNS or IP address

  

• Can't send or receive messages on behalf of Verizon (tdwolfe2). A timeout occurred during communication with the server.

  This message box appears quite a bit. All I have to do to solve it? Thanks for any solid help. MW

  Hi Mary,

  Please contact the Microsoft Community forums.

  It seems that you are unable to send or receive messages on behalf of Verizon.

  He would be grateful if you could answer a few questions to refine the question.

  1. What mail client do you use? What is customer e-mail based on the web or Microsoft Outlook client?

  2. are you aware of changes to the computer before the show?

  3. do you use Internet Explorer to access e-mail? If so, what is the version installed on the computer?

  This question seems a temporary problem with the server and you can consult again later.

  If you use Internet Explorer, you can perform the steps described in the article.

  The problems of access to webmail using Internet Explorer

  http://support.Microsoft.com/kb/2483955

  Note: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  If you use the Microsoft Outlook client, you can post the question here.

  http://answers.Microsoft.com/en-us/Office

  If you use Windows Live, you can post the question here.
  http://answers.Microsoft.com/en-us/windowslive

  Hope this information helps. Get back to us if you have more queries about Windows.

• Installation of VMware workstation in a machine with vmware server 2.0 is already installed?

  is it possible to install the latest version of vmware workstation (I guess that's 6.5) in a machine where vmware server 2.0 is already installed? where possible there at - it something I should know before installing vmware workstation (eg. problems known, network suspends etc.)? in particual I am a little concerned network mangement (eg. both vmware server and vmware workstation in fact add virtaul adapters: is a possible trouble caouse?). The host of the virtual machine is vista ultimate x 64 with 8gig of ram and a quad core cpu.

  I did a little research, and from what I understand, this was not possible with vmware server 1.0 x.. as the situation has changed with vmware server 2.0?

  (in case you are wondering why I sholud be willing to do):

  I worked with vm ware Server 2.0 for about a year, but now I miss some of the features that are only present in vmware workstation: multiple snapshot and clone VM vm ware server... However is much more flexible when you don't have physical access to your VM host... so I was wondering if it is possible to get the best of both worlds : I would like to use vm ware workstation allows you to configure virtual machines and manage snapshots and vmware server to remotely manage virtual machines, I've created with workstation. Is it not possible?

  Thanks in advance for your attention

  We discussed some time ago

  See this post for the results

  http://communities.VMware.com/message/1309546#1309546

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Problem of UK with ASP and Access database date format

  I have an Asp form that updates of the records in a database Access. It comes
  the date of the registration of database format is dd/mm/yyyy (UK), when
  the folder is displayed in the form, it is mm/dd/yyyy (US) who, after I
  update the record in the database, the date has changed to the new format.
  
  I tried everything I can to change the format
  vain... someone at - it any ideas how I can fix this?
  
  
  Thank you
  Steve
  
  

  Stevo.s wrote:
  > Hi
  >
  > I tried to change the format on the date field on the server behaviors
  > panelto DDMMYYYY. Also have tried to define the field of form DDMMYY format. I have
  > also tried to use a function that I got from a somehwere to post on the net or not
  > avail. < %="" fonction="" ddmmyyyy(vardate)=""> < br=""> > DDMMYYYY = Day (DateValue (varDate)) & "/" & Month (DateValue (varDate)) < br=""> > & "/" & Year (DateValue (varDate)) < br=""> > end function < br=""> > < br=""> > I believe that it is a problem with Dreamweaver and access but < br=""> > can't seem to grasp her work around! Problem being that I teach myself through < br=""> > books and internet articles and can take weeks at a time without being able to < br=""> > watch question... whenever I come back to it, it's like start all over < br="" >="" >="" nouveau !="" j’espérais="" que="" quelque="" part="" de="" sortir="" là,="" il="" y="" a="" une="" solution="" simple="" le=""> < br=""> > may deliver a datePicker with the built-in functionality to address the < br=""> > question... I am wanting to understand how to deal with the issue rather than simply < br=""> > change my date field of database to fudge the issue that I'm in England and when I < br=""> > eventually start using the application, I wish there is some < br=""> > coherence with the dates of arrival and that users are familiar with the format. < br=""> > < br=""> > any help gratefully received!

  Its not Dreamweaver, or access, its your settings regional servers, his game to the United States < br=""> format, not in the United Kingdom.

  On your page at the top of the page using:

  < %="" session.lcid="2057" %="">

  This will force the page using UK format dates. Use it on any
  page to format the page correctly.

  Dooza
  --
  Display guidelines
  http://www.Adobe.com/support/forums/guidelines.html
  How to ask Smart Questions
  http://www.CatB.org/ESR/FAQs/smart-questions.html

• Error SSO to access plugin auth. Integration with third-party access

  Hello
  Whit a SSO using integration with third party access.
  I create a class of access and configuration of policy.properties.
  
  but the small jets, I'm trying to access the Oracle Portal, I get this error:
  
  Sun Mar 07 06:49:16 MEETING 2010 [DEBUG] AJPRequestHandler - ApplicationServerThread - 6 FilePolicyManager.getAuthClassName: retrieve the plugin n
  SOUL for, MediumSecurity_AuthPlugin
  Sun Mar 07 06:49:16 MEETING 2010 [DEBUG] AJPRequestHandler - ApplicationServerThread - 6 FilePolicyManager.getAuthClassName: auth card back
  in name, INE.security.ssoplugin.SSOINEAuth
  Sun Mar 07 06:49:16 MEETING 2010 [DEBUG] AJPRequestHandler-ApplicationServerThread-6 creating instance of the auth plugin: INE.security.ssoplugi
  n.SSOINEAuth...
  Sun Mar 07 06:49:16 MEETING 2010 [ERROR] AJPRequestHandler - ApplicationServerThread - 6 Auth object, INE.security.ssoplugin.SSOINEAuth could not
  t be created: null
  Sun Mar 07 06:49:16 MEETING 2010 [DEBUG] authentication of the call of AJPRequestHandler-ApplicationServerThread-6
  Sun Mar 07 06:49:16 MEETING 2010 [ERROR] AJPRequestHandler - ApplicationServerThread - 6 Unexpected Exception received
  java.lang.NullPointerException
  at oracle.security.sso.server.ui.SSOLoginServlet.processSSOPartnerRequest(SSOLoginServlet.java:796)
  at oracle.security.sso.server.ui.SSOLoginServlet.doPost(SSOLoginServlet.java:328)
  at oracle.security.sso.server.ui.SSOLoginServlet.doGet(SSOLoginServlet.java:285)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
  at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
  at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
  to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:192)
  at java.lang.Thread.run(Thread.java:534)
  
  I compiled it:
  AVAC - classpath $ORACLE_HOME/j2ee/OC4J_SECURITY/applib/INESSO.jar:$ORACLE_HOME/sso/lib/ipastoolkit.jar:$ORACLE_HOME/j2ee/home/lib/servlet.jar SSOINEAuth.java.
  
  and I can use:
  
  AVAC - classpath $ORACLE_HOME/j2ee/OC4J_SECURITY/applib/INESSO.jar:$ORACLE_HOME/sso/lib/ipastoolkit.jar:$ORACLE_HOME/j2ee/home/lib/servlet.jar SSOINEAuth.java.
  
  but at SSO can´t use this class.
  
  can it help me?
  
  Published by: rocamora on 15-mar-2010 14:36

  Hi rocamora,.

  The OSSO server is not finding your plugin in the classpath. When you compile the code, you can try this.

  javac - classpath $ORACLE_HOME/j2ee/OC4J_SECURITY/applib/INESSO.jar:$ORACLE_HOME/sso/lib/ipastoolkit.jar:$ORACLE_HOME/j2ee/home/lib/servlet.jar d $ORACLE_HOME/sso/plugin SSOINEAuth.java.

  -Vinod

• Oracle 11g on IBM - AIX 5.3 LPAR with VIO-Server

  Hello
  
  
  We are researching the application of Oracle RAC 11 g on the solution IBM LPARS running IBM AIX 5.3 TL06
  These LPAR uses a VIO-server access I/o.
  Now a paper said THAT Violence is not supported for Oracle RAC, the other document's and jet of another State, it is only supported for use with the DSO
  
  Can someone point me to a site with real support information or can someone tell me if the RAC is currently working on an LPAR with a VIO Server
  
  Thanks in advance

  It's the matrix of certification:
  http://www.Oracle.com/technology/products/database/clustering/certify/tech_generic_unix_new.html

  IE even RAC + asm must be used if violence is used for 11g thus.