Software configuration of demonstration of Vision Builder with time real EVS 1464

Similar Questions

• Install Windows on SMU-8133 (with time real operating system already installed)

  Hi all

  I have an SMU-8133 NI with a real-time operating system (OR Real - Time PharLap 13.1). Now I want to install Windows on it and make it dual-boot (I want to keep the original real time operating system). So my question is how do I install Windows without erasing the current real time operating system?

  I tried to just install Win7 (starting from USB) but it says "Windows cannot be installed on disk 0 Partition 1" because she needs NTFS (what we have is the FAT I think). If Win7 is unavailable, Windows XP is also correct, but I still prefer Win7.

  

  Thank you!

  As a general rule, Windows don't play well with other operating systems installed on a drive, there will be some efforts to preserve the existing installation of RT OS if it is a requirement.  The simplest approach would be to wipe the entire disk, installing Windows and then reinstall LabVIEW RT.

  If you can start from scratch, you must first make sure that the partitioning is correct.  Since you did not purchase this as a Windows / controller dual boot RT initially, you do not have Windows installation media OR, correctly configure the partitions from disk for you.  You will need to do this manually during the installation of Windows.  The best approach is to create two partitions, one for the RT and a Windows.  RT the partition must be the first partition on the disk.  Install Windows on the second partition.  Once Windows is installed, convert the 1st partition to FAT32 using the built in Windows or a 3rd party partitioning tool utilities.  You should now have a system with Windows installed correctly and ready to be fitted to RT.

  Change your SMU-8133 to boot RT using the BIOS Setup menu or hardware DIP switch.  It should boot to safemode RT.  From another host PC, find your target in MAX.

  You can now put your target if you want to switch to the FAT32 file system the system of dependency files.  You can do this through MAX, or by using the utility RT USB key.  See herefor details on this step.

  Warning: Before doing this, ensure a MAXIMUM target shows already the correct amount of disk space for partition 1, you created.  If the RT operating system can see a usable partition (FAT32 or dependency) it will set up only that partition by avoiding to touch the rest of the disc.  If the 1st partition is not used, the formatting process will claim rather all of the disk because no usable partition has been found, and you may lose your Windows installation.

  After that, you can perform the installation of the RT of MAX software as usual.

  If you try to preserve your existing installation, you can try to combine the above process with one of the options available for the creation and restoration of RT disk images, although I am not very familiar with these tools and can not comment or creating an image on a single disk partition and restaurant then a disc multi-partition will be successful.  Here is a good linkto start with which describes the options available.

  -JoshH

• Error - Vision Builder Inspection to LabVIEW Migration

  
  

  You can verify that you have read/write access to your temporary folder (in general C:\Documents and Settings\Settings\Temp).

  This error is due to the fact that a temporary file (VBAI.bin) is probably not written in this file or cannot be read during code generation. Is it present in this folder after you try to generate the code?

  What privileges you have when you run Vision Builder AI? If you are logged on as administrator? You can try to run Vision Builder with administrator privileges and see if you still get the same error?

  Also, what operating system are you using?

  Thank you

  Christophe

• Cannot acquire image with NI1744 using the interface configuration of Vision Builder AI 2011: error-1073774588

  I use a 1744 OR with NI Vision Builder AI 2011. When I'm in the interface of the inspection, the camera will acquire and display an image. When I go to the configuration interface and try to put in place the stage of image acquisition, I have error-1073774588: the undefined error. I sometimes also 1074396159 error: not enough memory.

  Thank you for your repply Burrito.

  The problem was sloved and two errors went away after I formatted the camera and reinstalled the software on the camera.

• The DALSA X 64 - YEAR QUAD Framegrabber is compatible with Vision Builder AI 3.6

  Hello

  I think use the DALSA Framegrabber with 4 camera inputs. I was just wondering, if this framegrabber is compatible with the Vision Builder AI 3.6?

  Thank you

  The only framegrabbers directly supported by VBAI that are produced by National Instruments, see http://sine.ni.com/nifn/cds/view/main/p/sn/n32:frameGrabber / lang/en/nest/1286/ap/vision.  If your application requires three or more cameras, I would suggest using a pair of PCIe-1430 framegrabber with Camera Link cameras, PCIe-8235 with cameras GigE or using a firewire camera configuration.

  -Robert

• NEITHER Vision Builder, acquire Images with fake delivery

  Hello world

  I am a student and I work as a trainee in a company, which produce helmets.

  To control the quality of helmets, there is a Webcam, wich take pictures of each helmet product.

  These Images are saved on the server. With the tool 'Simulate delivery', I can analyze the images, which are now in the folder.

  But when a new Image is the drop in the folder, I actually start the inspection again.

  How can I realize that NI Vision Builder always takes the current Images in the folder?

  Thank you very much for your help!

  Best regards

  Romain Menz

  Here is a simple example that illustrates how to dynamically read the images from a folder. Once the image has been retruned to VBAI, the image file is moved to a subfolder called Complete, so he has not read again the next time step is called. Step returns an error if there is not more images of the file type in the folder.

  Hope this helps,

  Brad

• run a VI in labview with Vision Builder (VBAI)

  HELO,

  I try to use the 'run VI' tool of the vbai (2010). When I lunch the inspection on my PC (with labview 2010) it's ok, but on another PC (without labview), I got an error message (dll is missing).

  I have to copy the data in a specific folder to use this tool?

  You have solutions to solve my problem?

  Thank you

  Ulysses

  If you read the context-sensitive help for the LabVIEW execution step, there will be clear instructions to operate the LLB for Vision Builder AI. I'm not including instructions here because they change slightly depending on the version of the VBAI you are using. However, here are some useful links:

  http://digital.NI.com/public.nsf/allkb/231D87B9D8C3B71A862572D4007EAAF8

  http://forums.NI.com/T5/machine-vision/quot-make-sure-all-of-the-VI-dependencies-including-VI-lib-VI...

  Access the LabVIEW execution step in VBAI, change it, then go to the help > show contextual help (Ctrl-H). In the FAQ tab, there will be a link to describe in detail how to build your LLB for distribution... read carefully and follow the directions.

  Hope this helps,

  Brad

• I can't create an installer, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

  I can't create an installer on LabView, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

  Hi, Shada, this can happen if you include additional installers to your installer for example DAQmx. When you do this the installation program must include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder he updated MAX, so when your Installer try to understand MAX, his request the source where it was installed in your computer in this case Vision Builder.

  Here you can cache information so it is not asked once again, or you can download a version more recent fo DAQmx, then it will update MAX and change the dependecy.

  You can find more details about it in this KB:

  3S88PJMY knowledge base: why do I get an error message 'Missing Distribution' when you try to build an install...

  And to keep a copy, here's more information:

  How to stop missing delivery Notification whenever I build an installer?

  Best regards

• NEITHER Vision Builder to tiara

  Hello NOR the community.

  I built a system to measure through NI Vision Builder. Now I can record the measured data (only!) in a *.csv or *.txt file.

  I want to import the data measured in DIAdem automatically.

  Is there a better way to do it? Is there a direct Interface between the 2 software systems?

  Thanks in advance!

  Hi Steffen,

  When you install DIAdem you are also automatically installing a separate program, called "My DataFinder", which is a database and indexing service.  The tiara and "My DataFinder" use the DataPlugins even index of load/data files.  When you complete a session of text use wizard, it creates and registers a use in addition to load the data file into the data portal in DIAdem.  The idea is that eventually DIAdem both the DataFinder can use the use that you created for the load index / all similar data files.  In practice, the use you get from the Assistant is often not ideal for use with a variety of similar data files.

  My initial inquiries indicate that ASCII files, you are already creating the best leads that we have between Vision Builder and tiara.  The marketing director of DIAdem is now advocating for options in future versions of Vision Builder who could provide a superior connection.  For now, however, I think our best bet is to outfit you with strong DataPlugins which will provide drag & drop of loading in the NAVIGATOR tiara as well as automatic indexing to the DataFinder database.

  So, could you post some of the ASCII files you created with Vision Builder?  I would be willing to create a use or a set of DataPlugins that should give you the basic data functionality and connectivity you are after with DIAdem.  Or you could send to [email protected]

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• vision builder to labview migration

  Hello

  I have a project of vision. Pluggable VISION BUILDER pour image processing and the LabVIEW pour interfacing.

  My question is: how to call an inspection done by VISION BUILDER in the LabVIEW software.

  NB: I found in the Tools menu of VISION BUILDER a feature titled "Migrating to LabVIEW. but she could not be executed because I don't own

  the DEVOLEPMENT VISION MODULE. Have to buy another software OR (VISION DEVOLEPMENT MODULE) pour fix my problem? : smileysurprised:

  Thanks in advance

  Hello

  Vision Builder is provided with an ActiveX control that you can call from LabVIEW. You will find enclosed a few Directory promotion the in examples

  \

  The ActiveX component allows to control Vision Builder as you would you interface greengrocers. Once you have created your inspection in Vision Builder, you can use the ActiveX component to connect a Vision Builder of LabVIEW, open an inspection, execute, recover and display the image (you need not purchase the Vision Development Module pour it), and get the results of inspection and each step of the inspection.

  Hoping that this answer has your expectation

  Kind regards.

  Christophe

  OR R & D Vision

• Result variation and inconsistency Ni Vision Builder AI

  I am currently using OR Vision Builder HAVE (2012) to analyze a series of images, and the preparation of appropriate inspections, I noticed that the results are not reproducible.  I am currently using various measures of analysis such as the color of the measure, number of pixels and the strength of edge and using the data logging feature.  The problem is that if I double-click on a stage as if to change, click on transfer to the next image, without changing anything, click OK, and then run all the tests again, I get different results.

  For things like the number of pixels that is relatively small - anywhere.0001 about 3 when it comes to figures around 200, but for the strength of edge especially these range from 10-20 at a time and sometimes he could find even an advantage that is then seen in over 40 years (and the edge resistance threshold is well below this value).  If this is inevitable then I can run many tests and average results, but it will be a lot of time because it also involves the steps wrong edition.

  Mainly, I would like to know if it is common and expected and if there is a known percentage error, or maybe I can change the configuration of the program in an attempt to overcome the problem?

  Thank you!

  The good news is that we have found what is the problem. When you change a step that uses a coordinate system and the current image is not the same as that used during the stage was originally set, the return on investment is transformed to the new position and step updates the settings used for this new position, when you press OK. Rounded the errors that occur when the transformed KING is caluclated, the new system of basic contact information you may not in the same positions of the KING. Kings use integers and therefore round us to the nearest integer, but it does not exactly the same positions as the coordinate system original base product. This may cause the new coordinate system of the step being out of up to 1 pixel and causes the return on investment deal with a slightly different part of the image

  For a given inspection/images, the results will not change unless you change the step that's important.

  If you change a step, but do not want to make changes, press Cancel instead of OK, and all settings will be the same.

  We will study a real fix for this problem that involves only update the coordinate system basis when the user redraws the return on investment, but the bad news is that this correction will not be in the version of Vision Builder AI we are about to go out.

  I'm sorry for this gap, and we plan to address in the future.

  Thank you

  Brad

• black bands - the problem of bandwidth - Vision Builder HAVE

  Hello

  I have a problem with an app where I anime shows Vision Builder 4 on 1 computer. Everything seems to go well until after some time (sometimes minutes, sometimes half an hour) I get horizontal black stripes on my images.

  I searched this forum and found many posts on this problem. However, I tried the various solutions that have been proposed and this does not seem to make a difference.

  Information:

  * 4 camera (Allied Manta G201C)

  * camera is triggered (rising edge) separately, but almost simultaneously.

  * PC: quadcore, 64-bit, Windows 7 64 bit system

  * Run-time Vision Builder 2012 license.

  * Programmed with Vision Builder HAVE 2012.

  * Switch: 1000 MB

  * Interface programmed in c# (receives images of the relevant info 4 programs and displays on the screen).

  Proven methods:

  * Sets the size of the packets to 1500 (even tried low size of package without improvement).

  * Set desired maximum bandwidth to 250 no improvement (was initially set at 1000 - we put it to 250 because there are 4 camera - even the 150 configuration does not seem to improve the situation.)

  * cursed a lot - but which did not help either.

  * Can use us a switch that does not fit our goal?

  * Our switch is placed with several engines around it (the closest on a meter away) and just behind a cabin of electricity in which there are several transformers. That reach our data?

  * Other suggestions?

  * Please let me know if you need additional information about this problem.

  We expect our customers to visit us the week next to see if we will be able to start production and we are currently under enormous time pressure (and stress). So, any help would be greatly appreciated.

  With sincere friendships.
  Tom

  
  

• demonstration of vision or new database?

  I am a student with E-business suite R12, I successfully installed the E-business suite database of demonstration of vision on my machine.my project is related to four modules of human resources management, finance, inventory management and project management, then I use vision demo databse or new base data?
  Regareds
  Forton Iqbal

  Hi Forton,

  If you aren't aware of the functional configuration, then the vision demonstration database should be your choice, and you do not have to do a full implementation.

  For the module you need to start with, it is not easy for a person to implement the human and financial resources. You can start with the financial (GL, AR, AR... etc), then move with HR, but it would take a lot of time.

  I suggest that you go with the demo of vision, understand the Setup program that is already implemented by using the documentation, and then install a new database and start your own implementation.

  Library of Documentation of version 12.0.4
  http://download.Oracle.com/docs/CD/B40089_09/current/HTML/docset.html

  Kind regards
  Hussein

• Control of a system of engine not to not 2 - axes of Vision Builder

  Hello

  is there a way to control 2 Motors step by step via Vision Builder?

  What are the components do I need?

  BR,

  Klaus

  Hello knuemm,

  There is no action, which allows to directly control the player. It depends on your hardware configuration, some engines step by step has a serial interface and also the device the vbai is running on other devices of movement has a digital input and some vbai devices have outputs digital that may be used for this.

  Fleeing a LabVIEW VBAI Inspection

  I followed the smartcam NOR control pilot Motion

  You can also create steps for the VBAI to run LabVIEW code

  NEITHER Vision Builder HAVE Development Toolkit

• Vision Builder 2013 DURATION: Selection of Inspection

  VBAI2013 I would like to insert a step of selection of inspection in the selection state of inspection which applies to the system on which the Vision Builder is installed and not to individual inspections. Therefore, it is not possible to how in the Version of the Runtime-license-where to add the steps?

  Thanks in advance.

  The steps for product status select are saved in the "Vision Builder system Config.ini' in the folder VBAI. You should be able to copy this file to the machine with the runtime version and if it has the same version of the VBAI, it should be able to apply all the steps and the INI settings.

  Hope that helps,

  Brad