Playlist with songs of memory internally and externally?

Similar Questions

• Mix records with the same name of the internal and external space (clip +)

  Hello

  I have a question regarding the reading of 'File': if having a folder on the inside and external space microsd, both are named "graphics". Is it possible to shuffel these 2 files with the same name? There are also a few other folders I want to be included, so I just couldn't use the "play all" option. I don't want to use replay by id3tag because mines are always screwed up and would be a lot of work to mark all the appropriate files in the.

  Thanks for help

  m.

  I've not played with playlists much.

  If ID3 tags are all screwed up, I would use the MP3tag utility to change the label of the kind in "Charts" on internal and external memory, then you access the kind-> just Charts and play at all.  It is probably not an option if your labels are blank and you don't want to ruin you, but it's really quick & easy to do with MP3tag.

  I think that even Windows Explorer (XP/Vista) can change the field type in the batch (select all 'charts' music files, click right properties, summary (Advanced) tab change the field of its kind in "Charts", OK).  I keep the ID3tags 'good' on my PC, but edit on my player according to the needs.

  Just another idea which is really easy if you're not afraid of screwing the ID3 tags.

• Best practices for storage and backups on internal and external drives

  Hello

  I have a Mac laptop and I would like your advice on how to organize the storage of files on internal and external drives and how optimizes it the backup plan.

  From now on, my organization of file storage is:

  I keep my most important files on the internal disk of SSD encrypted and less critical files on an encrypted external drive (format ExFAT). This external hard drive was errors, so I bought a new Laetitia 2 Tb drive that I formatted in Mac OS journaled with encryption instead of ExFAT, to replace.

  For backups, I do not use Time Machine, but I use an application that synchronizes files between two disks. By using this application, I first sync the essential document on the SSD files internal to the external drive, and then I synchronize all the external drive to another external drive.

  My question is, if I keep this Organization of file storage or I should, for example just move all my files, critical and non-critical for the internal SSD (I could make enough room for that) and then backup up the whole Mac with Time Machine? Or there is a better way to organize files in this scenario?

  The second question is, if it is better to keep the Organization as it split storage (internal, less critical on external criticism) is what would be the best way to back up everything?

  Thanks in advance for all contributions.

  First of all, to the ExFAT is the problem, I suggest that the reader will just physically hurt.  ExFAT is perfectly acceptable as a format where Mac and PC can read/write.  You may have reacted a little leaving ExFAT for HFS, but you have made your choice and adapts to it.

  Here is how I operate my backups:

  I use CCC (CarbonCopyClone, $40, bombich.com).  It copies the boot sectors, drive, mapping, recovery Partition (these three are 'invisible' to DiskUtility for most) as well as system partitions and data records 'other'.  These other disks may be internal for clone-to-test-new-OSX in multi-disc systems or external for backup purposes.  The beauty is that you can start an external clone in a system crash, then CCC will be re - copy the active external clone on a new/fixed internal drive.

  Encryption isn't something I know, but... If only the content of the system partition and data is encrypted, it * could * be OK for clone-back to partition-as-encrypted partitions.  If you clone internal external the external partition is active and copy the 'encrypted plan', while small adjustments are made so that the race could be bad.  Copy of the files on my partitions unencrypted change interrupt because they are individual files.

  As an alternative, you could have a system drive that does CCC charge, let the clone encrypted and encrypted internal idle and just copy the entire map with the 'third system' active.

• Impossible to listen to the music or sounds using internal and external speakers

  Original: connect external speakers

  I have an Acer Aspire Z5700 all-in-one computer.  I have two external speakers with an audio jack and a USB port that I can connect to the computer and I when it is connected to the computer, I hear out of them my question is how to get the sound of the computer system internal and external speakers at the same time?

  Hi Joseph,.

  I would keep informs you that it is not possible to play sounds or music using internal and external speakers at the same time.
  You can play music using any one option at a time, either the internal speakers or external speakers.

• Internal and external drives hard. Vista and XP recognizes the limits? The partitions ok?

  Hello. I had a few questions. It focuses on internal and external HDD. I have Vista and XP. I read a bit of info I would like to shed some light on.

  I watched an external HARD disc. A Western Digital 2 to My Book Studio Edition II external HARD drive, USB 2.0 / FireWire 800 / eSATA. In the end what he says:

  The system configuration required

  • Available USB port, FireWire 800 or 400 port, port eSATA or eSATA adapter card
  • Mac OS X 10.5.2 10.4.10+, +.
  • Windows 2000/XP/Vista
    Note: the 4 TB version works with Windows® Vista only. Windows 2000/XP do not support hard drives with capacities above 2 TB.

  I guess it's true. So: If someone were to buy a 4 TB model: can you even plug the drive in Windows XP and then partition it in two? Or will it give errors or not be recognized?

  What about Windows 7? I guess it's more advanced than Vista. Obviously.

  I am looking for 3 Tb + internal and external HARD drive. I can not find them. I ' v looked on the websites Seagates and Western Digital, Future Shop and Best Buy, local stores, etc. Maybe I missed them. I think I can start to see well for the holiday season.

  Thank you.

  I don't think that there may be a problem with xp sp3. I don't know with vista sp2 and 7 should work for you.

  BIOS update is also important.

  High-Tech http://www.computerstar.ca/datarecovery.html

• internal and external memory

  someone knows why I downloaded all my music on an external sd card, but my music shows also in my memory internal when I thought that he wouldn't?

  The Zip is a bit unique, because it is a menu of music and a menu card . By selecting the map menu, you can browse the files stored on the external memory card. However, the menu music will display songs located in the internal memory and on the map as well. It is not a list of songs exclusively to the location of the internal memory.

  Did you see that leads you to believe that the files are copied in both places? As Bob stated, when you browse through the list in the menu music, files that are actually on the card will be a small icon next to them.

  Note also that you can go to the lower part of the menu music to Folders. Here, you can select either the internal memory or external and navigate to check what are the files residing where.

• Hyperlinks - different settings for internal and external links?

  Hello

  I was wondering if it is possible to change the "Open link in a new window or tab" for individual links?

  I'm linking to some sites of clients, and for all this, I want the links to open in a new window/tab so that my site remains active behind.

  I then several links that are in the anchorages and pages within my site - for the latter, I want they will open in the same window, so the user can use the back buttons and not end up with a ton of windows/tabs open at the same time.

  If external link - internal - and open in a new window, same window.  Is this possible?

  
  

  Thank you

  Hi Ryan,

  You can change the option "Open link in a new window or tab" for individual links.

  You must select the links individually, and then make the changes.

• Satellite A215-S4747 (internal and external) microphone does not work

  Hello

  I write about my wife by Satellite A215-S4747 running Windows XP.
  A few months ago as the built-in microphone and external microphone has stopped working.

  This made me think it was a driver problem, although no issue in
  Control Panel > sounds and Audio devices > equipment for all drivers.

  I went through the Troubleshooting Wizard, but that did not help.
  I went and downloaded drivers RealTek HD Audio (R2.67), but that didn't fix it.

  Any help is very appreciated.

  Thank you

  Peter

  I want to emphasize that this machine is about 6 years old, making the possibility of some parts break most likely...

  Hello

  Sound works. Right? Well well, in that case I n t think that it is an audio driver problem.

  First of all, I think you should check some basic settings.
  (1) mic device.
  Go to the control panel-> sounds and Audio-> Audio-> sound recording devices
  Here you check if device right microphone has been selected

  (2) mic volume
  Go to the control panel-> sounds and Audio devices-> Audio-> audio-> Volume
  Here you check if the volume is at max level
  Additional button Advanced should be available at the bottom of the mic volume control click that it and check if the mic push in checked.

  Have you installed some tools or software which may affect (disabled) the microphone?

• Domain name internal and external DNS Server 2003 are the same

  Since coming to my site from internal to an external hosting provider, I can't navigate the site on my local network

  I created the necessary www folder and addrd public IP address for the my Web site.

  I have created a delegation for the DNS Zone and set it to my server for dns SOA me reported.

  I've seen this configuration several times in other networks but I canoe understand this one.

  C:\>ipconfig/all

  Windows IP configuration

  Name of the host...: EIS03
  Suffix main Dns...: evolutionimpressions.com
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: evolutionimpressions.com

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  ... Description: BCM5708C NetXtreme II GigE (NDIS Broadcom
  VBD customer)
  Physical address.... : 00-19-B9-BC-3D-1E
  DHCP active...: No.
  IP address...: 172.16.1.5
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. : 172.16.1.177
  DNS servers...: 172.16.1.5.

  C:\>ping www.evolutionimpressions.com

  Ping www.evolutionimpressions.com [184.168.26.1] with 32 bytes of data:

  Reply from 184.168.26.1: bytes = 32 time = 67ms TTL = 59
  Reply from 184.168.26.1: bytes = 32 time = 66ms TTL = 59
  Reply from 184.168.26.1: bytes = 32 time = 61ms TTL = 59
  Reply from 184.168.26.1: bytes = 32 time = 89ms TTL = 59

  Ping statistics for 184.168.26.1:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss),
  Time approximate round trip in milli-seconds:
  Minimum = 61ms, Maximum = 89ms, average = 70ms

  C:\>nslookup
  Default server: eis03.evolutionimpressions.com
  Address: 172.16.1.5

  > www.evolutionimpressions.com
  Server: eis03.evolutionimpressions.com
  Address: 172.16.1.5

  Name: www.evolutionimpressions.com
  Address: 184.168.26.1

  >

  Hello

  We provide no support for Windows Server 2003 here. You should repost your question in the Windows Server forums at http://social.technet.microsoft.com/Forums/en-us/category/windowsserver.

• Internal and external customers see certificate of Cisco router, NOT Exchange SSL certificate

  Cisco 876 Integrated Services router (ISR)
  Exchange Server 2010 SP1

  Customer: 2013 Outlook, OWA, ActiveSync WP7/WP8 (?)

  Put us in place a new Cisco ISR. Almost everything works fine, with a few exceptions. Exchange e-mail stopped altogether for several days until I realized that I needed to redirect the ports, SMTP, HTTP, and HTTPS, by external to the Exchange Server. Now, mail flow is fine, but...

  Every time I start Outlook, I get a certificate error. When I look at the certificate in the error popup, it points actually to certificate self-signed Cisco router. When we try to use the Windows phones, they get a "certificate error" and direct the user to the network administrator. Even with OWA: a certificate error, even if it can be "accepted" / overridden.

  Each customer can still work, with the exception of Windows phones. In Outlook and OWA, mail is always be sent and received, but must be accepted manually that the certificate is wrong before the customer takes care, and then it takes a little longer to load.

  Any ideas?

  I did "" port forwarding on the pots of 25, 80 and 443. Again, I did it yesterday and now mail seems to flow, whereas before, even if we could enter the client with Certificate error, message not be received. (There was also a problem with mail however not passed, but that was due to our mail relay provider and was set yesterday as well...)

  Everything worked fine with the previous router (obviously). It was a high-end, the level of consumption Fritz! Box commonly used in Germany. I also had to allow ports through this box is not unlike using the nat ip inside static commands on the 876, but I don't know what he could have let his own or why SRI is the Exchange Server application SSL certificate hijacking.

  Thanks in advance for any help.

  jeremyNLSO
  CCNA Routing & Switching, CCNA security
  MCITP, MCTS
  Berlin, Germany

  If we have actually figured this out today. The internal DHCP Server distributing the a DNS Server public as well as the internal DNS. The internal DNS was time and the customer became the external IP address of the public DNS and it received an unexpected cert of the router. Once we removed the public DNS servers from the DHCP server and used only DNS servers in-house, that the issue went away. Logical after we realized what was going on.

• Internal and external links do not work in this page

  It's so simple, but does not work.  I have my text for the internal link highlight and drag the Point to the icon of the file to my folder.  Everything seems good.  I save the file and upload it to my host server.  I loaded the page and refresh to make sure that I have the last page.  I click on the link and it does nothing else, the link is displayed by Chrome at the bottom left of the screen.  I tried many things including the construction of a new page from scratch with the same results.  Any clue?

  Also, I have an external link to google maps is not working

  Here is a part of the HTML:

  < div class = "smaller_paragraph" >

  < p > Julia Lake House is located in the beautiful Bella Vista, Arkansas. Here is a map showing the location of the home of Lake Julia. Bella Vista is located next to Bentonville, the location of the famous Crystal Bridges Museum of American Art and the home of Wal-Mart. "Things to do in the area in addition to relax in a home beautiful Lake on the Lake Loch Lomond, < a href ="... / things to do.html "> click here." < /a > we are in the corner of Northwest Arkansas, and there are a lot of things to do for all age groups. < /p >

  "< p > if you < a href ="https://www.google.com/maps/place/Applecross+Pl, +Bella+Vista,+AR+72715/@36.4510736,-94.280 4846,12z/data=!4m5!3m4!1s0x87c90146b2bb995d:0xa693cae63f4abc19!8m2!3d36.4610465!4d-94.3315 145"target ="_blank"> click here < /a >, it will open this card on your computer, tablet or phone." < /p >

  "< p > < img src="images/Map/map.jpg "alt =" "width ="500"height ="318"title ="Contact"/ > < / p >"

  < p > < / p >

  < / div >

  Help before I lose my mind!

  Thank you.

  Don

  Ah, it looks like that the float: left you have on you're a: active class in your modelsection is out the link under the mouse by clicking on it.

  Remove that should do the trick.

• Backup hard drives internal and external to separate the partitions on an external drive of a second... ?

  I want to back up an internal hard drive (let's call it 'A') and (B) external drive using Time Machine. Both are 1 TB in size, so I bought a 2 TB external drive and created two partitions (C and D) on this subject, only to receive each backup. So:

  A = internal hard drive

  B = external drive (for "overflow" files)

  C = partition to external drive for backups of A

  D = partition to external drive for backups of B

  My question is, can I set up Time Machine so that A back up C, every time the 2 TB drive is connected, and B backup up to D whenever the two external drives are connected? I thought it would be possible, but at the opening of the Time Machine preferences and selecting D for the first time I get a message saying:

  "You want to stop backup up to 'C' and use"D"instead or back up at the same time?

  If you use the two, Time Machine will take turns backup up to "C" and "D". »

  I wonder if it would just be easier to return to a single partition on the hard disk of 2 TB and have the time machine to perform a backup of everything, that is, both A and B?

  Last question: I'm doing this to improve Yosemite to El Capitan. the operating system affect what I'm trying to get time Machine to do?

  Thank you!

  Use Time Machine to back up or restore your Mac - Apple Support

  I have a non-partitioned device TM backup of your data and your OS disk at once

  If in case you partition and drive "B" needs more than what is on the partition and drive 'A' don't you avoid warning.

  update of the OS is fine, as it will give an output back to a previous TM operating system where you need it, but it is compatible across versions.

• Satellite L750 - ODD internal and external does not-code 19

  Hello

  We have a Satellite L750. The dvd/cd rom is not working. We get information are: the configuration is incomplete or lacking in the registry.
  We tried an external USB 2.0 cd-rom. same error message.
  We have downloaded the USB patch and the page Web of Toshiba registry patch. Nothing changes.

  What shall we do?

  Best regards
  Michael

  What operating system do you use?
  Your machine is pre-installed with original OS that you got with it?

  Check it please this article.
  Maybe he can help you.

• Exchange of data between the internal and external labview code

  Sorry for a simple question.

  I have a TestStand sequence that uses units/tests written in LabVIEW. The sequence is extermnally began with a stand alone LabVIEW program. I need to establish simple exchanges of information between units of the sequence LabVIEW and LabVIEW external code.

  Information are simple strings will eventually be sent in both directions.

  Please advice what commumnication path needs to be implemented.

  Unfortunately, arttempts to search OR site Internet (or Internet) result in a large number of irrelevant information. Probably, I can't shape appropriate keywords. There is therefore a need for your help.

  Thank you

  _Y_ wrote:
  [...] It takes by presenting some initial information (e.g. username) in the sequence [...]

  Use a Message from the user interface of query for the data (data available in the user interface, executing sequence requires it).

  _Y_ wrote:
  [...] and view the status of intermediate/final level in the user interface.

  Use a Message from the user interface to transmit these data to the display (data available in the execution of sequences, Which requires it)

  Norbert

  EDIT: Btw, you should use TestStand user to nicks track management. This gives you more options and security than some custom stuff implemented in the user interface.

• Play sounds simultaneously through internal and external speaker

  I am using Windows 7 on my laptop. I want the sound to play through the computer laptop internal speakers but also external device to THE (such as headphones or additional speakers) to get some sort of effect surround sound.

  I know it's physically possible , because it has already happened by chance, but I don't know how to reproduce the setting. How can I configure sound to do this? Do I need additional software to do this reliably? or do I just set up the parameters correctly?

  Thank you for your time.

  Thank you. In fact, I found a way to do this, though in a different way. However, the method to THE I am unable to reproduce even though I know that I did accidentally before. I tried to plug it, but as soon as the contacts based on the card, the computer has already routed audio signals on non speaker...

  In any case, I have the thing of audio system / speakers Realtek driver. He has the stereo mix (in the recording devices section). What I ended up doing was using the machine, making it a copy of all the sounds that my computer, and send it through a different exit. In my case, I sent it to my screen via HDMI. (To THE does not count as a 'different' output, so connect a auxiliary disables the built-in speakers). Then at the back of my screen, I have connected my external speaker to THE.'

  The foregoing seems complex, this is a clarification of what is happenning:

  -Sound plays through speakers

  -Stereo Mix of Realtek audio copy and forward it to my HDMI screen

  -Display transmits the audio signal to external speakers to THE.

  It's the only way I found to do this effectively, however, there is a slight delay on a fraction (maybe half?) of a second. So the external speakers are a little late compared to the built-in speakers.