PlayReady folder on Mac causing of questions looking at NetFlix

Similar Questions

• How to synchronize one folder on Mac using timecapsule

  Hi guys,.

  How can I synchronize a single folder on Mac using timecapsule? in particular, I want to syn photoes file, not as an iphoto, just like a regular folder folder.

  so two of my macs have the same record and every time me or my wife adds a few new files/folder, I would like to be synchronized to timecapsule and another mac.

  is this possible?

  Thank you

  It's possible... but if you want to easily purchase the software... ChronoSync.

  It is designed to keep the two Macs in sync.

  Average manuals to do revolve around writing scripts to rsync and running of the Terminal commands.

  The TC adds nothing to this btw... You can use it, but it is not necessary.

  And Time Machine if that's what you thought to use to perform the synchronization is of no use at all.

• Downloads: whenever I download something it used to stay in the download window until I deleted it. Now, will it automatically in a downloads folder that I have to go look

  Whenever I download something it used to stay in the download window until I deleted it.  Now, he will automatically in a downloads folder that I have to go look.  How can I fix?  And can I delete stuff in this folder once it's been downloaded?

  "And I can delete stuff in this file once it's been downloaded?"

  If you delete a download without 1 do something with it, it wll be lost.

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-file-you-have-downloaded

  Search for a file that you have downloaded

  Read the above info.

  See you soon.

  Mick Murphy - Microsoft partner

• I've just updated FF 14.0.1 (Mac 10.6.8) and now netflix won't work. He is asked to restart in 32-bit mode and I changed in the Get Info to 32-bit. No luck.

  I've just updated FF 14.0.1 (Mac 10.6.8) and now netflix won't work. He is asked to restart in 32-bit mode and I changed in the Get Info to 32-bit. No luck.

  Yes, I have the same problem. Silverlight 4 does not work in Firefox 14.0.1. Used to use only "restarting in 32-bit mode", but now, who is caught in a loop without end. Silverlight 5 will work, but the video is choppy so badly that it is very bad. I think it's a fall frames in all directions.
  Someone needs to fix this problem yesterday.

• When you look at Netflix my streaming, trolling, I'm running uverse 6 Gig.

  I want to know if there is a verification of fix so video don't lag when I look at netflix

  I want to know if there is a verification of fix so video don't lag when I look at netflix

  What type of Internet do you have? It's very similar to is not a Windows problem, but that your internet connection is slow.

• image folder of the file with question mark flashing on the screen

  I just bought a 2 month old 15 "macbook pro to an individual. I turned it on this morning and there is a picture of a small folder with a question mark in the Center, flashing on and outside. does anyone have a solution for this?

  Hi Hotrod45:

  Was this before start or is this the first time you the active since buying it?

  Check out this technical note. If flashing question mark appears when you start your Mac - Apple Support

  Kim

• How do I download pictures from iCloud in folder on Mac

  Is Hey Folks - possible to upload photos in iCloud photo library in a folder on your Mac hard drive? As it is now, I can select a bunch of pictures but must take into account for open/save box dialog for EACH photo! Very inefficient way of doing things to say the least. Please notify.

  Thank you!

  ALR

  How do you download photos to iCloud photo library?

  I do it like this:

  • I go to www.icloud.com,
  • Open the Photos.app, click 'Select Photos'
  • Now, I can select a series of photos by clicking on the first photos, hold down the SHIFT key, and then click the last of the range.
  • Now, I click on 'Download' and I see the photos, dropping one by one in my downloads folder, without any confirmation dialog.

  

• try to delete the misspelled words of dict. In library > application support I do not have a firefox... folder on mac

  on a mac... I added a misspelled word to firefox dict. I found some tutorials for how to remove. Following these, I went into the library > application support and I do not have a firefox folder there. I also used the finder to search for the file persdict.dat and nothing. Help please.

  Copy and paste this code in the Code field in the ' tools > error Console " and click on evaluate to see the location of the profile folder.

  alert(Components.classes["@mozilla.org/file/directory_service;1"].getService(Components.interfaces.nsIProperties).get("ProfD", Components.interfaces.nsIFile).path);

• YouTube mac causing to restart

  Ive had this problem since August. Whenever I use youtube and occasionally Netflix or other sites of streaming videos, my computer will freeze and crash. It will restart and then everything will be fine for a while, and then he'll do it again. I called Apple support and we worked together, re-creating things and that worked for about two weeks, and then he started to do it again. Ive rebooted the system in safe mode a couple of times different and tried to re-definition of the P - Ram a couple different tent but the question still comes up. I have a Macbook Pro 15 inch, he just got in July. I have a friend who has the 13-inch and has no problems like this with his... I just want it to stop crashing! Please help; C

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Win32k.sys caused BSOD IRQL, looking for likely causes

  While I was recording game for a game with Fraps, I got BSODed with him saying that an IRQL_NOT_LESS_OR_EQUAL error has been generated by win32k.sys.  I have debugged the minidump file and am looking for a reason why it happened.  I don't see anything obvious to said in the report that is generated if:

  Loading dump file [C:\Windows\Minidump\Mini071811-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (4 procs) free x 86 compatible
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 6002.18327.x86fre.vistasp2_gdr.101014 - 0432
  Computer name:
  Core = 0 x 82036000 PsLoadedModuleList = 0x8214dc70
  The debugging session: my Jul 18 22:01:47.823 2011 - 07:00 (UTC).
  System Uptime: 5 days 2:05:24.971
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .........................................
  Loading user symbols
  Loading unloaded module list
  ..................
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck A, {9f5fffe4, 2, 1, 820cbc5b}

  Probably caused by: win32k.sys (win32k! Win32AllocPool + 13)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  IRQL_NOT_LESS_OR_EQUAL (a)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If a kernel debugger is available, download the stack trace.
  Arguments:
  Arg1: 9f5fffe4, memory referenced
  Arg2: 00000002, IRQL
  Arg3: 00000001, bit field:
  bit 0: value 0 = read operation, 1 = write operation
  bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
  Arg4: 820cbc5b, address memory

  Debugging information:
  ------------------

  WRITE_ADDRESS: GetPointerFromAddress: unable to read from 8216d 868
  Cannot read MiSystemVaType memory at 8214d 420
  9f5fffe4

  CURRENT_IRQL: 2

  FAULTING_IP:
  NT! MiUnlinkFreeOrZeroedPage + 87
  820cbc5b 890c 10 mov dword ptr [eax + edx], ecx

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0XA

  Nom_processus: pcsx2 - r4600.exe

  TRAP_FRAME: cac1b9fc-(.trap 0xffffffffcac1b9fc)
  ErrCode = 00000002
  EAX = ebx = 00000023 000010a 8 ecx = 00004600 edx = 00000000 esi = 00000000 edi = f68fc0a8
  EIP = 820eb23a esp = cac1ba70 ebp = cac1bab8 iopl = 0 nv in pe of na EI pl nz nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010206
  NT! ExpAllocateBigPool + 0 x 231:
  820eb23a 895ffc mov dword ptr [edi-4], ebx ds:0023:f68fc0a4 is?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from 820cbc5b to 82083fd9

  STACK_TEXT:
  cac1b7a0 820cbc5b badb0d00 88c8d8b8 83600000 nt! KiTrap0E + 0x2e1
  cac1b824 820cbeaf 00049351 85e44478 400001d 5 nt! MiUnlinkFreeOrZeroedPage + 0 x 87
  cac1b864 820ae467 000001d 5 86399030 c07b47e0 nt! MiRemoveAnyPage + 0x16c
  cac1b8ac 820adce4 00000001 f68fc0a4 c07b47e0 nt! MiResolveDemandZeroFault + 0x2e2
  cac1b968 820cf331 f68fc0a4 00000000 00000000 nt! MiDispatchFault + 0xadb
  cac1b9e4 82083dd4 00000001 f68fc0a4 00000000 nt! MmAccessFault + 0x10c6
  cac1b9e4 820eb23a 00000001 f68fc0a4 00000000 nt! KiTrap0E + 0xdc
  57 000000 has 8 00000021 000010 82123c cac1bab8 has 8 nt! ExpAllocateBigPool + 0 x 231
  00000021 000010a 0 35316847 nt a21664c9 cac1bb18! ExAllocatePoolWithTag + 0 x 116
  cac1bb2c a214a4aa 000010a 0 35316847 and 00000000 win32k! Win32AllocPool + 0x13
  cac1bb40 a216a2ee 000010 has 0 cac1bbe4 35316847 win32k! PALLOCMEM + 0X18
  cac1bb5c a214a88d 000010a 0 00000001 and 00000005 win32k! AllocateObject + 0 x 97
  cac1bb94 a21533c1 00000000 00000000 00000080 win32k! SURFMEM::bCreateDIB + 0x21d
  cac1bc48 a2127c98 01010052 00000000 00000000 win32k! GreCreateDIBitmapReal + 0x320
  cac1bce4 a2127f35 085a805c 00000000 00000000 win32k! _InternalGetIconInfo + 0xbe
  cac1bd44 82080c7a 00010003 085a805c 00000000 win32k! NtUserGetIconInfo + 0xf1
  cac1bd44 77d75ca4 00010003 085a805c 00000000 nt! KiFastCallEntry + 0x12a
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  00000000 00000000 00000000 00000000 0x77d75ca4 085a803c

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  Win32k! Win32AllocPool + 13
  5 d a21664c9 pop ebp

  SYMBOL_STACK_INDEX: 9

  SYMBOL_NAME: win32k! Win32AllocPool + 13

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: win32k

  Nom_image: win32k.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4d6f96aa

  FAILURE_BUCKET_ID: 0xA_win32k! Win32AllocPool + 13

  BUCKET_ID: 0xA_win32k! Win32AllocPool + 13

  Follow-up: MachineOwner
  ---------

  So far, this was the only time where I had it coming, but I have not tried from new record yet.  Actively running programs are FireFox, Pcsx2 and Fraps.  However, I ran these before without this issue arise.  I'm inclined to think that this is a time to screw that maybe something has been registered correctly or incorrectly read memory.

  Hello

  References to Vista also apply to Windows 7.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also glue in and out to check for those, even if all the tests of memory do not respond
  a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
  RUN AS ADMIN follow the instructions

  Windows Vista: How to scan / test your RAM or memory with Windows Vista Memory Diagnostic
  Tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• "Scan to computer" button on Mac causes crash

  HP Officejet Pro 8600

  iMac running Max OS X Lion 10.7.5 end of 2006 (the most recent available for the Mac), fixed IP address. Wireless network.

  Can not activate the function "scan to computer".

  Had problems, but set through the day THEN updated the software Apple (essential!). Now, all ok.

  Hello anslo,.

  Welcome to the Forums of HP Support!

  I see that you had a problem with scanning in the Mac 10.7.5. It seems that you have solved the problem by running updates on the Mac, is this correct?

  If more questions, do not hesitate to ask.

• Import a folder in LR3 causes the bridge make the second copy of each file.  Is there a solution?

  I. am I did wrong, please?  I can't face having to remove all other photos in a folder of bridge whenever I have import into LR, and I'm sure that there is a better way.

  Looks like you are using copy instead of adding in the import window.

• Why not junk detector permanently delete suspicious mail rather than send it to the junk e-mail folder? SOLVED caused by McAfee spam controls

  Recently, from a month ago or so, when I open Thunderbird and it connects to my ISP to download new e-mail messages, e-mails that the Junk detector "think" might be spam, these emails are deleted immediately permanently instead of being moved to my Junk folder, as I've mentioned Thunderbird in all options on how to manage junk e-mail. I know that there have been e-mails that were sent to me for the first time by a new friend or colleague whom I have not yet put in my contacts folder. In fact, I know an e-mail in particular when someone sent me his email address in the email that comes to be obtained permanently deleted. So if anyone knows what's happening here and what I can do to stop this behavior, I'd be very grateful all assistance. This time, to monitor the activity, I connect to my e-mail through my ISP account so I can examine what is in the Inbox ready to be downloaded in Thunderbird before you start Thunderbird. It is a nuisance, but is the only way I know for the moment to monitor all my incoming mail. Thank you!

  Sorry for the delay in the publication... Disable McAfee spam controls solve my problem. All incoming messages marked as spam is successfully sent to my junk e-mail folder.

  Thanks for your help!

• How can I get the name of site icons/logos before in my bookmarks folder (new MAC had on my old) established

  My old mac/firefox ('9' pre & mac "lion") showed icon/logo next to the name of the site in my bookmark folders. (IE). Wells fargo, pge, target, etc.

  It is the new icon 'Virgin' by default. If the site did not have an icon before, which will be the placeholder.

• Save Link As/New folder/save/Firefox causes Crash

  Right click on a link and choose "save link as..." »
  Navigate to the location you want, then click on "new folder."
  Name the folder, and then open
  Click "Save".
  Firefox crashes
  --
  Restart and use the new folder or any folder existing and everything goes well after that.

  To completely uninstall Firefox, see http://kb.mozillazine.org/Uninstalling_Firefox#On_Windows