YouTube mac causing to restart

Similar Questions

• Where the application is stored on mac? I restarted my computer and that you can not find it now

  Where the application is stored on mac? I restarted my computer and that you can not find it now

  in your applications > adobe subfolders.

• YouTube / GIFs causes sound stretch and shuts down the computer.

  Hello.

  Everything worked him up until the spring of 2014 when my internet lost residence. Finally moved to another residence in summer 2014 and has noticed that when using my laptop once again that Youtube videos and animated GIFs stretched and stuttered sound and froze my computer.

  Flash player, Java, Windows Media player and IE were affected. I tried to update all but settled is constantly interrupted by error messages. It all traces back to IE but can not enter say it or re-install / update. I rather not uninstall all of the programs mentioned above for fear of these programs is not able to install afterwards. Restorations and restores system were made but only up to a point (less than a month ago) and not to the most remote, with few results.

  Also somehow had internet limited during spring 2014 from time to time but Kaspersky failed to update normally and himself knocked out. Had to use his troubleshooting and Best Buy help re - install, but it was a successful installation. Perhaps something got through that affects those above apps but Kaspersky found nothing wrong.

  A question, someone of you recommended a total OS re - install at this point? Operating system is Windows 7.

  Hello

  Most often this is caused by requiring to do two things (or both):

  1. make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  2 disable hardware acceleration in your browser:

  Firefox-

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  IE - http://www.SevenForums.com/tutorials/149063-Internet-Explorer-GPU-hardware-acceleration-turn-off.html

  Chrome - http://www.sevenforums.com/tutorials/271264-chrome-gpu-hardware-acceleration-turn-off.html

  Kind regards

  Patrick

• Videos of YouTube suddenly stop and restart only in Firefox

  Last night around 20:00 I watched a video without problem, Youtube closed my browser and did other things for a while. When I got home at about 22:00 and tried to watch another video, the video suddenly stopped a few seconds, gave me "an error occurred" then suddenly the video began again to the place he stopped but now it was a small hook to the start/stop point (see attached image). This wouldn't be a problem if it happened once in a while, but since last night, it happens with ALL videos regardless of the length or quality. In fact, sometimes it forces me to watch it on the highest quality and makes the other options unavailable. If I try to refresh it takes a LONG or simply refreshes forever. And God forbid that I should have to other windows or tabs open when this happens because they will suddenly stop loading or get REALLY laggy. I have no choice but to watch Youtube in IE that works amazingly well and does not shit that I have just described.

  Everything is up-to-date. I deleted Max, temporary files, cookies and history. I have not downloaded or installed anything in the last 24 hours. I asked other people who use the FF on this matter and they all say it's very good so I don't know what to do anymore.

  HTML video everywhere, it is as the name of an add-on you that Firefox should use the HTML5 player for all videos from websites.

  The starting and stopping of video can be affected by a firewall or an antivirus

  Read performance of the very annoying sounds in this situation. In general, the steps of troubleshooting we can try:

  • same place his impasse: clear cookies and cache-fact
  • Make sure Flash is updated or try to reinstall the flash player-made
  • Right click on the video and disable hardware acceleration
  • The speed of the internet, it is faster to download the video to watch it?
  • Free up memory and reload the video page
  • Delete temporary internet files - Windows has built in a few tools to do this
  • If I try to update it takes a LONG or simply refreshes forever-> This is an indication that you may need to clear the cache.
  • Right-click on a video and select "Global settings" menu in advanced, clear the cache from here, and then restart the browser.

• How to find out what caused a restart of the system?

  Hi guys,.

  I have an imac 2010 it is my work station but he kept recently restart itself and it affects my photography work.

  Here is the info from the newspaper. Can someone help me?

  See you soon,.

  Nick

  Anonymous UUID: 0CD4931D-E12A-266E-6F53-DFA806417CBC

  Kills Apr 28 14:16:16 2016

  Panic report *.

  panic (cpu 5 0xffffff8004dd155a appellant): Kernel trap at 0xffffff800523acb0, type 14 = page fault, registers:

  CR0: 0X000000008001003B, CR2: 0XFFFFFF833FA19F89 CR3: 0X00000002AA561000 CR4: 0 X 0000000000002660

  RAX: 0 X 0000000000010001, RBX: 0XFFFFFF833FA1A000 RCX: 0XFFFFFF833FA1A008 RDX: 0 X 0000000000000001

  RER: 0XFFFFFF837ECDBD10, RBP: 0XFFFFFF837ECDBD20, IHR: 0 X 0000000000000000, RDI: 0XFFFFFF833FA1A000

  R8: 0X000000000000FFFF, R9: 0 X 0000000000000001, R10: 0 X 0000000000000000, R11: 0X000056FDB89D1D8A

  R12: 0X190CBFCB323C0061, R13: 0XFFFFFF8065C71EE0, R14: 0XFFFFFF833FA1A000 R15: 0XFFFFFF8065C71FB4

  RFL: 0 X 0000000000010203, RIP: 0XFFFFFF800523ACB0, CS: 0000000000000008, SS 0 X: 0 X 0000000000000000

  Lack of CR2: 0xffffff833fa19f89, error code: 0 x 0000000000000000, CPU error: 0x5, PL: 0

  Backtrace (CPU 5), frame: return address

  0xffffff837ecdb9a0: 0xffffff8004cde792

  0xffffff837ecdba20: 0xffffff8004dd155a

  0xffffff837ecdbc00: 0xffffff8004def233

  0xffffff837ecdbc20: 0xffffff800523acb0

  0xffffff837ecdbd20: 0xffffff8004d9ae32

  0xffffff837ecdbe30: 0xffffff8004ce2ef3

  0xffffff837ecdbe60: 0xffffff8004cc68a8

  0xffffff837ecdbea0: 0xffffff8004cd62e5

  0xffffff837ecdbf10: 0xffffff8004dbbd2a

  0xffffff837ecdbfb0: 0xffffff8004defa56

  Corresponding to the current thread BSD process name: Astropad

  Mac OS version:

  15 C 50

  Kernel version:

  15.2.0 Darwin kernel version: Fri Nov 13 19:56:56 PST 2015; root:XNU-3248.20.55~2/RELEASE_X86_64

  Kernel UUID: 17EA3101-D2E4-31BF-BDA9-931F51049F93

  Slide kernel: 0x0000000004a00000

  Text of core base: 0xffffff8004c00000

  Text __HIB base: 0xffffff8004b00000

  Name of system model: iMac11, 3 (Mac-F2238BAE)

  Availability of the system in nanoseconds: 95647724127988

  last load kext to 5370207029316: com.apple.driver.IOBluetoothHIDDriver 4.4.3f4 (addr 0xffffff7f87e3a000 size 73728)

  Finally unloaded kext to 5201203585871: com.apple.driver.IOBluetoothHIDDriver 4.4.3f4 (addr 0xffffff7f8621e000 size 73728)

  kexts responsible:

  com.displaylink.driver.DisplayLinkDriver 2.5

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AppleHWSensor 1.9.5d0

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AGPM 110.20.21

  com Apple.Driver.pmtelemetry 1

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleMikeyDriver 272.51.3

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleHDA 272.51.3

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.iokit.IOBluetoothSerialManager 4.4.3f4

  com.apple.kext.AMDFramebuffer 1.4.0

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHV 1

  com.apple.AMDRadeonX3000 1.4.0

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.driver.AppleBacklight 170.8.3

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.kext.AMD5000Controller 1.4.0

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.AppleIRController 327,5

  com.apple.driver.AppleUSBCardReader 3.7.1

  com.apple.iokit.SCSITaskUserClient 3.7.7

  com.apple.driver.AppleUSBStorageCoexistentDriver 3.7.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.iokit.AppleBCM5701Ethernet 10.1.12

  com.apple.driver.AirPort.Atheros40 700.74.5

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com.apple.driver.IOBluetoothHIDDriver 4.4.3f4

  com Apple.kext.Triggers 1.0

  com.apple.driver.DspFuncLib 272.51.3

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSurface 108.0.1

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOAcceleratorFamily2 203.14

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.iokit.IOBluetoothFamily 4.4.3f4

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleHDAController 272.51.3

  com.apple.iokit.IOHDAFamily 272.51.3

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.kext.AMDSupport 1.4.0

  com.apple.AppleGraphicsDeviceControl 3.12.6

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.CoreStorage 517.20.1

  com.apple.iokit.IOUSBHIDDriver 900.4.1

  com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

  com.apple.driver.AppleUSBAudio 302.15

  com.apple.iokit.IOAudioFamily 204.3

  com.apple.vecLib.kext 1.2.0

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageClass 4.0.2

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.driver.usb.AppleUSBHub 1.0.1

  4.5.8 com.apple.iokit.IOFireWireFamily

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IO80211Family 1110.26

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.driver.usb.AppleUSBEHCI 1.0.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417.1

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Model: iMac11, 3, IM112.0057.B03 of BootROM, 4 processors, Intel Core i7, 2.93 GHz, 32 GB, MSC 1.59f2

  Graphics card: ATI Radeon HD 5750, ATI Radeon HD 5750, PCIe 1024 MB

  Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142314737334148302D4348392020

  Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142314737334148302D4348392020

  Memory module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142314737334148302D4348392020

  Memory module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142314737334148302D4348392020

  Airport: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0 - P2P

  Bluetooth: Version 4.4.3f4 16616, 3 services, 27 aircraft, 1 incoming serial ports

  Service network: Ethernet, Ethernet, en0

  Serial ATA Device: ST8000AS0002-1NA17Z, 8 TB

  Serial ATA Device: Corsair CSSD-F60GB2-A, 60,02 GB

  Serial ATA Device: SSD Samsung 850 EVO 2 TB, 2 TB

  USB device: USB 2.0 Bus

  USB device: Hub

  USB device: ASM107x

  USB device: Microsoft® Nano Transceiver v1.0

  USB Device: Card reader

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  USB device: USB 2.0 Bus

  USB device: Hub

  USB device: BCF2000

  USB device: My book 1230

  USB Device: IR receiver

  USB device: ISight built-in

  Crush Bus:

  It looks like a ram problem but the panic started when your computer saw com.displaylink.driver.DisplayLinkDriver 2.5 try to uninstall it and test.

  I guess that the 32 GB of ram is third, remove and reinstall the original of the ram and the test.

  Disconnect all devices and third test.

• El Capitan 10.11.4 update will not be ended because of Mac do not restart.

  Hello world!

  After update El Capitan 10.11.4 my Mac reboots by itself or stop, the update is not completely done as my Mac keeps freezing everything by restarting... I tried waiting for as much as three hours so he can get out by himself, but I always end up having to "stifle". Probably not the best thing to do, but it's the only way to turn off... I tried Safe Mode starts and it restarts correctly from there, but it does not restart in normal mode. I always get the message that the update is not finished and I need to restart. I tried first aid in the utility disc, but without success. I disconnected all applications requiring a connection/disconnection to shutdown/restart/login, including Wifi but without success it no more.

  Anyone got tips?

  Reset the SMC. Choose the method for "on Mac Laptops with non-removable battery.

  https://support.Apple.com/en-us/HT201295

  Boot mode safe. http://support.Apple.com/kb/PH18760

• Time Machine backup keeps causing MBP restart

  Hi all

  I'm a DJ and just more than one year, I bought a brand new series of mid-2012 13-inch Macbook Pro (non-retine) with an i5 2.5 Ghz processor.
  I installed a 750 7200 RPM HARD drive and max had the RAM to 16 GB with memory mac 'official' of CanComputers. I only use this machine for DJing. I have all my music in two folders on the desktop, I have 2-3 music applications and she. 10.9.5 running and I'm doing time machine backups every month.

  This month, my time machine was told the drive was corrupted and that I was able to read (it was a 500 GB Lacie Rugged). OK: I had another drive, a 1 TB USB3.0 Toshiba Ext HDD. 4 GB in the new backup, laptop computer suddenly shutdown, reboot and I get the message that the computer turns off due to a problem. I looked in the logs and nothing in particular stood out.

  I tried excluding my office of the backup and it worked - it supported a set of 3 GB. Then I added a little music on the desktop and excluded other files, and it has not yet. The entire backup is estimated to be about 450GB.

  I don't have time to play the files on this computer. Someone please tell me what I can do to solve this problem, or at least what is causing the problem. In the meantime, does anyone have an effective solution for the backup of these files?

  Thank you

  Danny

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Adobe first elements causing 2 restart

  When I try to run Adobe first Elements 2 it causes my new A100-756 to restart, but it works very well on A110-276 my husband no idea why?

  Please check this thread on the very similar problem:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20360&MessageID=74715

  It may be useful

• Vmtools upgrade always causes a restart of comments?

  All updates of the Vmtools always cause a reboot of the guest operating system? Or is it sometimes slight improvements that could be made without a reboot?

  ESX/ESXi 4.x on the host and any Windows server OS, say 2003 and later versions.

  Yes, it's the same for new installations, upgrades and even re-installation of VMware tools.

  I'm not sure if the restart is required all the time. I think that this was included in the package to be on the side "Save."

  André

• 42 of Firefox, Nexus 7 2013 WIFI, Android 6 (Marshmallow) by listening to the video site causes crash/restart tablet

  Firefox 42, Nexus 7 2013 WIFI, Android 6 (Marshmallow mra58v mra58k mra58u)
  Play any video on this webpage www.iene.mediaset.it restarts the unit after 20-30 seconds of reading

  It is resolved with the update from yesterday for Firefox 42.0.1. https://www.Mozilla.org/en-us/mobile/42.0.1/releasenotes/

• HP DV6: SimplePass causing dllhost restart

  Hello. So I have a laptop DV 6 and I upgraded to Win10 when released MS it is free. Since then it has worked very well. All of a sudden, I noticed that my mouse cursor is flashing and showing a busy sign and my LED finger print scanner blinks as well.

  I have used Explorer process to invesigate and found that the dllhost.exe was put on and ending and reformulating in a loop with a new process id. I disabled the biometric device and the system has stabilized.

  I then activated the unit and the behavior resumed. I've disabled and scanned for viruses (not found). I removed simplepass and helped the unit, the system is stable. I reinstalled simplepass and the problem is back.

  At this point, I have removed simplepass and download ccleaner to see if there is something in the registry causing and the question. I have the driver version is 4.5.235.0. The Simplepass Version is 6.0.100.244 (mentioned on the setup.exe)

  Ideas to help solve this problem will be apprecaited.

  Kind regards

  Arot

  Hi, arot:

  Have you tried the W10 single pass software version?

  This package contains the HP SimplePass Identity Protection software for the notebook models and operating systems. This software protects the identity information and account access using fingerprint of the owner of the computer.

  File name: sp71729.exe

  Exit the: July 21, 2015

  Version 8.01.46 Rev.A

  Provides the updated release of the HP SimplePass software.

• PlayReady folder on Mac causing of questions looking at NetFlix

  I have a mac and I am unable to watch Netflix. I was told that it is because I do not have a folder of playready. I don't know what that means. What should I do?

  Hello

  You can ask the links below for help:

  https://discussions.Apple.com/index.jspa

  http://forums.Silverlight.NET/

• Update Vista caused constant restarting PC

  Hey,.

  After an automatic update this week, my PC is now constantly reset. Same thing happened to my laptop in the beginning of the week. I finished my laptop (via the org windows vista disk) implementation in shape, but would rather not do it on my desktop PC that I have a lot of things on it.

  I tried the system restore via disk and automatic error fixing, but nothing.

  What should I do?

  Is your DVD a good Vista DVD.
  That's what you need for the repair, not a recovery disk.

  Try this:

  1. system restore
  2 ERD bootable.
  3 data Recovery if you have to do a reinstall.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your falls into the above category: download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• "Scan to computer" button on Mac causes crash

  HP Officejet Pro 8600

  iMac running Max OS X Lion 10.7.5 end of 2006 (the most recent available for the Mac), fixed IP address. Wireless network.

  Can not activate the function "scan to computer".

  Had problems, but set through the day THEN updated the software Apple (essential!). Now, all ok.

  Hello anslo,.

  Welcome to the Forums of HP Support!

  I see that you had a problem with scanning in the Mac 10.7.5. It seems that you have solved the problem by running updates on the Mac, is this correct?

  If more questions, do not hesitate to ask.

• Dreamweaver CS6: Embedding Youtube video causes DW stops responding

  Hello

  I'm building a simple site that displays a youtube video on the home page. The video is placed in a div tag that is placed in a specific location on the bottom of the page to make it appear as if he plays on an old PC which is part of the image. I paste the code in the div tag in code view and it appears as a grey box in design mode. Everything seems fine until there, but when I click on the live mode view DW CS6 stops responding and the design view window becomes white. I tried to paste the video embed code on my other page and in an empty html document to see if it was a problem with the rest of the code, but the same thing happens on the pages. If I save the page and preview in Chrome or Firefox page displays the windows cursor to load for a few minutes and then returns a youtube error 6 (ERR_FILE_NOT_FOUND).

  I spent a few hours of research and nothing found via Google, Adobe and Lynda.com tutorials help searches. I am new to the web design and CSS and got as much as I did through lessons from Lynda.com. That is to say that I have an index page and a separate game guide page linking back displaying the images and the text exactly as I want. Everything else works pretty well, only video integration gives me bad, which is frustrating, because from what I read it is supposed to be one of the simplest processes.

  I'm really at a loss on how to solve this problem and would appreciate any help the Adobe community can give me.

  Thanks in advance.

  Good to know,

  I solved the problem, but I don't know exactly why it worked. I went to another site that uses Youtube videos erotic and tried their embed code that appeared the same to my untrained eye. But to my surprise this video worked perfectly, so I just put the url of my video in and it worked. I don't know that why, as far as I can tell that as well incorporate codes are the same. Both use