plays dvd video plays do not only audio CDs

Similar Questions

• DVD/CD RW do not read audio CDs or data or save a blank CD, but that it's ok to read and write DVDs

  My DVD/CD RW drive will not respond to CDs of any type, void, audio or data.  It whirs for a few seconds and then more nothing.  No AutoPlay (even if she is selected and in the registry as a value of 1), and if I try to click on the drive, the old hourglass stand forever and if I click on new does not, unless I have the disc, it erases then back to normal.

  The drive works fine for DVD reading and writing.  I tried to little nearly every thread relating to problems of CD, and I ran out of hair out! I uninstalled it, unplugged, repluged, rebooted, reinstalled, you name it! PC has updated the driver when I try to update.  I did all the advice regedit I saw and still nothing!  Anyone?  Please?

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  A CD/DVD cleaner might help.

  CD have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Video of WMP not only audio in windows xp

  Hello

  I downloaded an avi file and can not get the video to appear. I can hear the file. No one knows what buttons I push.

  Thank you, Doug

  Hello

  I downloaded an avi file and can not get the video to appear. I can hear the file. No one knows what buttons I push.

  Thank you, Doug

  =========================================
  If you have downloaded the form from the net .avi file, it can be a Xvid file...
  Download and install the following codec could be your solution:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  XviD Codec
  http://www.xvidmovies.com/codec/

  Free the following if you want to check the necessary codec...
  utility can do:

  Download GSpot
  http://www.free-codecs.com/download/GSpot.htm
  (left-click the text: "Download GSpot")
  (on the next screen...
  left click: 'Download [GSpot 2.70]')

  GSpot Super quick start
  http://www.headbands.com/GSpot/v26x/Quick_Start.html

  Evaluation of video files and Codecs with GSpot
  http://www.windowsmoviemakers.NET/PapaJohn/68/GSpot.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• As you drag the video in the Timeline, only audio files will show, not video.  Why

  Hello world!

  So I had to update to PPCC 2015 after 2014 CEP kept crashing on me while I just changed.  After having reopened the project and the program telling me to convert everything on the new 2015 PPCC, I didn't think it was a big deal.

  Well now, the old version of my project can still play all the videos, and the editing I've done, but when I try to drag in a new video to continue editing, only audio files will come in the timeline. The video will play in the window of the fine source drive, but try to get the actual image of the video in the timeline, will not be displayed.

  It makes me crazy!

  What should I do?

  It was activated at the same time. I closed my projects and rebooted my computer to see if that would do anything and now it works as usual. Thanks for your help anyway!

• I tried to watch the show from Stephen Colbert and not only audio video. Why?

  I'm a Firefox user dedicated for about 10 years now. The new current issue is: can I watch is no longer the Stephen Colbert show for some reason any. I have always used Firefox to watch this show. Now, I get only audio no visuals. I had to go to IE and it works perfectly. I only use his show as an example that might help with your application. I was curious if it's specific to Firefox and it is. IE displays video and audio. Advice?

  You can try to disable the HTML5 Media Player by setting these false prefs on the topic: config page.

  • Media.DirectShow.Enabled
  • Media.Windows - Media - foundation.enabled

  You can open the topic: config page via the bar of address and you can accept the warning and click "I'll be careful" to continue.

• PlayMemories home: Tool for creating a disc in standard definition image quality (STD) (DVD-video disc) is not available

  Hello

  I downloaded Sony PlayMemories home and tried to save my videos from camcorder to a disc in standard definition picture quality (STD) (DVD-video disc), it is described here:

  http://Guide.playmemoriesonline.com/help/en/PC/PMH-disc.html

  After installing the plugin extra DiscAuthor, the tool 'Create disc' has only the following three options:

  1. Data disc
  2. AVCHD (HD)
  3. Blu - ray (HD) disc

  The Option "DVD - Video (STD)" is completely absent.

  Does anyone know how to fix this?

  Thank you very much

  Daniel

  Hi dagleich,

  Thanks for the information. The problem can be located on the format of your videos. I checked the model number and found out that your camera records in MiniDV. Unfortunately, video tapes and CD recording is not transferable on DVD using the House PlayMemories disks. Even with their conversion into files Mp4 Mp4s cannot be burned on DVD discs.

  I would recommend looking for a local camera shop that could help to convert your files and save them in another medium.

  To get help with your concern, we recommend that you visit our Sony Global Web site for more information on contacting Sony's Support Center in your area athttp://www.sony.net/SonyInfo/Support/.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• YouCam video will play not only audio. Used apps page link. Can see screen capture.

  Hello

  We recorded a minute using Cyberlink Youcam video (the one on the 8.1 page apps, distinct from that with a shortcut on the main page of office - Youcam5.) We can see screenshot you of the video and the sound for the duration of the recording, but the screen is only green. Help please!

  Amber

  Hi @amberdag,

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers. You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that when you tried your YouCam 5 record playback, you can hear the sound, but the screen stays green.

  You did all your Windows updates?

  You either Direct X, Adobe flash player and direct X to date?

  Here is a link to How to fix green screen in YouTube video playback to the point 8.1 of Windows (from social.technet.microsoft.com) which should help you overcome this problem.

  Here is a YouTube video that can also help with this difficulty.

  Reading YouTube Green FIX screen problem

  Please let me know the results.

• HTML5 video: video freezes regularly while only audio continues to play. Firefox 12, Linux, Centos 5 up to date.

  whenever I find a YouTube video on my linux (Centos 5.8, completely up to date) using Firefox12 machine, YouTube still offers for me html5 instead of Flash video. It would be nice, but intermittently the video stops (while the audio continues to play). I click on the (I don't know how it's called) cursor to the current position and the video will move again. until he paused next time, anywhere from a few seconds to a few minutes.
  I don't know why he delivers html5 instead of flash, I get on my laptop using centos 6 and firefox12 flash video. Is there a way to configure Firefox to get flash instead? If this isn't the case, I would be grateful for help when the video component setting stopping.

  You may be on the Youtube html5 trial. http://www.YouTube.com/HTML5

  mha007, these three macromedia inks are more for Windows and not Linux.

• Satellite Pro A120: DVD/CD burner does not burn audio and video files

  Hello

  I have the Satellite Pro A120 with a cd/dvd burner MAT * a uj-8415. It works very well with data Brüning, but...

  When you try to burn the MP3 files or video files on DVD or CD/r or any type of audio file, it suddenly gives me an error message telling me that the cd can no longer be used.

  I tried hole Sonic (RecordNow), through Nero 6, and also directly by dragging and dropping files, but all was in vain. This MATI * a uj-8415 machine has also made the same error while burning a DVD double layer.

  Again, the unit reads all types of CD and DVD and writes also all types of files with the exception of the audio and video.

  Can you help me please to solve this problem?

  Hello

  I know that some mp3 files and audio are protected against copying and burning on different CDs or DVDs so could not work? ¦

  Other reasons why you can't write these files to CD or DVD is simply a problem of compatibility between the STRANGE and the CD or DVD.
  According to my experience, not all CD or DVD is supported, and these compatibility issues are not really rare.

  I also have another idea.
  Have you heard of burning of problems caused by the bad registry entry? I mean the upper and lower filters...

  Please check this doc MS:
  http://support.Microsoft.com/kb/270008/en-us

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  .. .and see if it helps.

• Terrible freezes during online play. Not only ping or delay.

  OK, so I was playing a MMORPG called Lineage 2 on my PC, when all of a sudden I got a blue screen of death. After the restarted PC I tried to type my password to user on startup and I immediately had a blue screen again. I was really worried and thought that I should try the system restore, since I have no idea what I would do if I encounter a blue screen. But he failed and there was a mistake, 0x80071a91. I scanned the PC, defragmented, ran CCleaner and searched a lot of answers via Google but so far without success.
  Ever since I got these 2 blue screens that everything is terribly late, including mainly games. I only managed to reduce delays when using internet browser or when all but any game.

  Once, I try to run any game all starts to freeze for a few seconds, every few seconds, including the game itself, the browser and everything. I'm stuck using a PC that is used to be able to run anything smoothly, including games like Crysis.I know that it has nothing to do with my internet from the same connection "freezes" occur when I try games offline as well.

  You have ANY ideas what could be the cause of the problem and how do I fix and prevent it from happening again? I have already decided to leave my PC switched off for about a day, but I don't think it will be as simple as that.

  Windows 7 Ultimate 32 bit
  Intel (R) Core (TM) i5 CPU 2.67 GHz
  2 GB RAM DirectX 11
  NVidia GeForce 9600 GT

  Thanks in advance.

  Hi Incredibad,

  • Provide us the error message or error code. Follow these steps:

  a. click on start

  b. right-click on computer

  c. click Properties

  d. in the System Properties window

  e. click Advanced system settings

  f. click on the Advanced tab

  g. uncheck: automatically restart

  h. when the problem occurs, you will receive message or error post back with the same error code.

  To refine, we can try to start the inclean start your computer and check if the problem still persists. Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135

  If the problem does not persist, you can continue with step 2 from the link above.

  Make sure that you reset the computer in normal mode in step 7.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HDMI output on Apple TV 4 sends audio and video on TV, not just audio and video for TV to a stereo receiver

  Just hooked up our new Apple TV. Excited is no longer need to use both optical HDMI cables so that everything happens [with our compatible audio receiver HDMI.] But to hook the HDMI cable to the receiver, it sends audio and video to the TV. The audio will not play back via the receiver which is very annoying. Anyone else having this problem?

  It all depends on how your receiver and the TV are connected. the general idea that underlies the HDMI, is that he send audio/video in HD quality via the same cable...

  my system is configured - Live tv on HDMI1, HDMI2 on ATV, bluray on HDMI3 and cable optical audio output to receiver - no "entry" material I look at, the audio comes through tv receiver.

  on the other hand, my father has everything connected to the receiver via HDMI, which acts as a transition to television, but he needs to change the entry on BOTH the TV and the receiver...

  How is your audio connected TV to the receiver - it cable on which exit?

• My video playback fails not only on the contraction

  I am able to watch videos on each trivial videos like youtube, vimeo site and independent sites. With the exception of twitch.tv , in which the player does not load. I have the most recent addition of flash and twitch.tv works perfectly on other browsers such as chrome or even IE.

  If you use extensions (Firefox/tools > Modules > Extensions) which can block content (e.g., Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that these extensions are not blocking content.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Satellite L650 internal speakers not working not not only audio with headphones

  Hi all

  As the title says, my internal speakers stopped working for a day.
  The sound works perfectly when I plug headphones (or speakers).

  I tried things include:
  -check all the sound options related to windows
  -restoration of the laptop when he worked at
  -Reinstall the drivers.

  The speakers are shown playing in the window configuration of the sound when I play a sound, I mean just nothing...

  If you have another suggestion, please share it.

  Thanks in advance!

  You can do last test and reinstall the OS using original recovery image, that you got with your laptop.
  Check the functionality with the factory settings.

• After loading of Roll Up 2 for Media Center and WMP 11 TV is not only audio signal of work remained.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  You use Windows Vista or XP?

  Try to download the latest drivers from the manufacturer of your tuner card and check if you get your video signal.

  We can't wait to hear back on your part.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro A100 (PSAAC) DVD-RAM UJ - 841S cannot read audio CDs

  Sat Pro (psaac) DVD-RAM UJ - 841S will not read or play the audio CD
  Everything else works fine but put in any audio cd and nowt.
  Help?

  Hello

  As you know, each CD is compatible and supported by each optical drive.
  Can I ask you this and audio CD don t work? These are original audio CD or burn one?
  You should know that many new audio s CDs come with copy protections of different and sometimes it happens that these CD s are not readable.

  But we must first know if need all options are enable. To do this you must enter the properties of the drive and check if the option enable digital CD audio for this CD-ROM device has been activated successfully.