plays very well on the rocket, but not on windows support

Similar Questions

• works very well on the shell, but not via cron

  Hello

  the ghettoVCB works pretty well on my vShpere 4.1 Standard Server run from console. My setup looks like this:

  vms2backup.conf: listed three VMs to backup

  I have a config file for each virtual machine. That looks like this:

  VM_BACKUP_VOLUME = / vmfs/volumes/VMBackup
  DISK_BACKUP_FORMAT = thin
  VM_BACKUP_ROTATION_COUNT = 3
  POWER_VM_DOWN_BEFORE_BACKUP = 0
  ENABLE_HARD_POWER_OFF = 0
  ITER_TO_WAIT_SHUTDOWN = 3
  POWER_DOWN_TIMEOUT = 5
  ENABLE_COMPRESSION = 0
  ADAPTER_FORMAT = ide
  VM_SNAPSHOT_MEMORY = 0
  VM_SNAPSHOT_QUIESCE = 0
  ENABLE_NON_PERSISTENT_NFS = 0
  UNMOUNT_NFS = 0
  NFS_SERVER = 172.30.0.195
  NFS_MOUNT = / nfsshare
  NFS_LOCAL_NAME = nfs_storage_backup
  NFS_VM_BACKUP_DIR = MyBackups
  SNAPSHOT_TIMEOUT = 15
  EMAIL_LOG = 1
  EMAIL_DEBUG = 1
  EMAIL_SERVER = mail.domain.com
  EMAIL_SERVER_PORT = 25
  [email protected]
  [email protected]

  The NFS part is not necessary.

  I start backing up shell like this: /ghettoVCB/ghettoVCB.sh f /ghettoVCB/vms2backup.conf-l /ghettoVCB/backup.log

  When from the backup of shell as mentioned above, everything works fine. In the end, I get an autoresponder email.

  But now, when I call this script with the same syntax via crontab, only the first two servers when saved and the script stops until the number of rotation shall take effect from the second server. If the third server is not saved and no e-mail is created.

  I have no idea until the problem could be. The hard disk is not full.

  Any ideas?

  Regards Wolfgang

  You can proceed as follows, re - run the script via cron but in your crontab entry, have it configured as follows, where you hit an error that is not connected:

  /ghettoVCB/ghettoVCB.sh f /ghettoVCB/vms2backup.conf-l /ghettoVCB/backup.log d debug - c /ghettoVCB > /ghettoVCB/ghettoDebug.txt

  It will redirect all the outputs generated during the race in /ghettoVCB/ghettoDebug.txt and see if there are errors.

• I can't hear any sound when you play a HDMI video uploaded to youtube, plays very well while on youtube but will not play sound from my hard drive after the use of realplayer download

  I can't hear any sound when you play a HDMI video uploaded to youtube, plays very well while on youtube but will not play sound from my hard drive after using the lplayer rea download

  Hello

  We will try to download different video using different downloader (other than RealPlayer) and see if the problem still persists.

• Play video works on the Simulator, but not on phone

  Hello

  I created a simple application that plays a video of Media Card. It works very well and play the video properly on simulators. But when I loaded the app on the phone (BB Bold), it shows just a white screen and no video.

  The media file is in the following path on the map:

  / Media Card/BlackBerry/videos/I66.3GP

  The path should be:

  file:///SDCard/BlackBerry/videos/I66.3gp

  OR

  file:/// Card/BlackBerry/videos/I66.3GP Media

  Any suggestions on how to get it to work on the phone?

  class final VideoScreen extends form {}
  Private player player;
  private VideoControl vc;

  {VideoScreen()}
  try {}

  Reader = Manager.createPlayer ("file:///SDCard/BlackBerry/videos/I66.3GP");
  Player.Realize ();
  VC = player.getControl ("VideoControl") (alarm);
  vc.initDisplayMode (VideoControl.USE_DIRECT_VIDEO, this);
       
  GUIControl gc;
  If ((gc = player.getControl ("GUIControl")) (GUIControl)! = null)
  Add ((Field) gc.initDisplayMode (GUIControl.USE_GUI_PRIMITIVE, null));
  vc.setDisplayLocation (15, 15);
  vc.setDisplaySize (400, 400);
  vc.setVisible (true);
  Player.Start ();
    
  } catch (Exception e) {}
  }
  }

  Problem solved! It turns out that the "IoException: cannot access the media file" is because the BB is hooked up to the computer via USB, apprently Media Card is not available when USB is plugged.

  However, when USB is removed, I get this error:

  java.lang.IllegalArgumentException: arg must not be null and must be a javax.microedition.lcdui.Canvas

  It turns out that the audio/video tutorial of BB is incorrect, initDisplayMode cannot accept "GUIControl", he cannot accept that the canvas. In addition, if we directly on canvas without instantiate, it will be also caused an IllegalArgumentException.

  Then, the following code works:

  VideoControl vc;

  Canvas canvas = new MyCanvas ();

  If ((vc = player.getControl ("VideoControl")) (alarm)! = null) {}

  vc.initDisplayMode (VideoControl.USE_DIRECT_VIDEO, canvas);

  vc.setDisplayLocation (15, 15);

  vc.setDisplaySize (400, 400);

  vc.setVisible (true);

  Player.Start ();

  }

  While (MyCanvas) is a dummy class that extends from javax.microedition.lcdui.Canvas

  Import javax.microedition.lcdui.Canvas;

  import net.rim.device.api.ui.Graphics;

   

  MyCanvas class extends Canvas {}

  public

   

  public MyCanvas() {}

  }

   

  Protected Sub paint (javax.microedition.lcdui.Graphics arg0) {}

  / / TODO Auto-generated method stub

  }

  }

• 2nd WVC54GCA works very well on the LAN, but I don't see it on the internet

  I recently bought a 2nd camera, so I can remotely monitor the 2 places home. The first camera that I put in place with the other default values that address static ip, I gave him, shipped port port 80 and when I type in my dynamic dns name like "http://myname.dyndns.org:80" it works very well, in fact I have same need to type the port number and it works. The dynamic dns used to take me direct to my configuration of routers (WRT54GL) but now I just type in: 8080 to the end to get to the configuration of the router to the internet. In any case, it works well and I can take pictures, live video monitor, movement detected email snaps etc. without any problem.

  Then I bought a 2nd WVC54GCA and together to the top of the same thing, he has assigned a static IP address and on the options page I activated the replacement web access port and left port 1024, port forwarded in the router with the new ip address and the port etc.  I can access the camera very well via a browser on my local network using the ip address: 1024 or the 'myname.dyndns.org:1024', but I can't access the cam 2nd via the net now. I am confused at this point, I didn't know that a second dynamic dns would be necessary since the device is configured to use a different port, and when I try using the ip address: 1024 it makes no difference anyway.

  Am I missing something here?

  What I thought was the problem wasn't, I had my port of port of port forwarding on the same number, and when you set the parameter port internal address port forwarding port, which is 80 in the case of the linksys cam.

  Once again that I realized that however, 1024 still wouldn't work, so I changed it to 8081 since my routers gui port is 8080, and I had to change the port setting to 81 in port forwarding and add: 81 to my dns address for it to work.

  Linksys should be ignored during the first 80 or some thing, or perhaps 80 is the default, because before when I wanted to join my router gui all outdoor I had was my dnyamic dns name without the: 8080, and when I added a cam to the network it would go directly to the cam, unless I specifically set : 8080 to the end.

  In any case, I have now the two cams work and accessible. For what it's worth, if there are people from linksys playback of this member of the Board they are terrible docco to explain things, the monitoring software is buggy as all get out and if I struggled as a computer scientist looks at work then the average schmoe stands little or no chance...

  My $.02

• Works very well in the Simulator, but when it is installed through the Desktop Manager questions

  OK so as well Hello world and production apps work correctly on the Simulator... I had some advanced api like blackberry.identity but I removed it because he yelled at me for code signing... I removed the advanced permissions but usually always open... I can see the application in the list of downloads, but clicking nothing

  I tried with the sample application engines and the same thing... click on the application icon, but nothing happens...

  Once again any word on sim and no not use any "features" except the blackberry.ui (on production app)

  blackberry 9630 tour

  Thanks for your help!

  All the BlackBerry Widgets require the signature, even if you are not using a single line of JavaScript.

  The software BlackBerry Widget SDK generates the Java code required to create the widget.  The display of web content in a Java BrowserField, which requires a signature.  Therefore, all the widgets must be signed.

  Code signing keys are usually issued within 2 days of the order, but may take up to 10 business days.

• F4580 works very well from the laptop but when I try to print something from mobile internet is blurry?

  Have run the HP Diagnostic print comes very well, very good copy.  The only problem is when I try to print something on the internet and then it's so blurry that it's barely readable.

  Hello Ann,.

  Allow me to quickly gather information about the issue in order to guide you in the right direction.

  1. what version of Windows is installed on the computer?

  2. what web browser do you use to print from the internet?

  3A this works much earlier?

  4 have have there been recent changes made on the computer before the show?

  I suggest you to refer to the links and check if it helps.

  Problems printing from the Internet

  I can't print or preview before printing a Web page in Internet Explorer

  Printing webpages: frequently asked questions

  Please post back with the results and we will be happy to help you further.

• Audio does not matter in the sequence, only the video? plays very well in the source window.  What should do?

  Please help... as a result of a recent pro first cc update, that I can't see the audio file in the sequence of the chronology of loading when I drag over the project Panel.  The video file is loaded correctly, but there is NO audio data during playback and no audio file loading.  The file is played both video and audio in the source Panel.  That's happened?

  It is almost always a problem with setting the patch/targeting of audio tracks...

  Neil

• Installation of Windows 7 works very well in analog mode, but not DVI mode

  I tried to install Windows 7 with the DVI cable is connected and when I get to the first reboot the screen is black and the installation will stop.  When I use a cable analog VGA instead of DVI installation cable is completed.  Why would using VGA and DVI not working.  It seems that if you have the possibility to use a cable two should work even. Any ideas?

  It is probably a quirk of the type of graphics card you have, fortunately, some cards can work outside either port with standard VGA drivers, but some lower end cards will not output unless the appropriate drivers are installed. (Some lower end cards can also have doubles outings, but can use 1 at a time, not in dualview)

• Recognized by the BIOS but not by Windows 7 disks

  I have 4 internal installed hard disks that worked well up until the other day.  The first is my main C: drive.  The second is my main data with several patricians disc. Then, I have two drives more who serve backup online and archive.

  When that I start my computer, the BIOS reports all four drives are present, but for some reason any Windows 7 seems not be recognizing the last two.  They are not classified in management of the discs, even on a new analysis and won't come when I try to scan for missing devices using Device Manager, where they are also not listed.

  Someone at - it ideas why this might be?

  Hi enormouse affect,

  1. you did it any software / hardware on the computer before this problem past?

  2. What is the number of brand and model of the computer?

  There are several possible reasons that the hard drive is not recognized.

  ·         Missing Chipset drivers

  ·         Hardware failure

  ·         It is an IDE drive, and it is in the wrong state (master / slave)

  ·         It is disabled in the bios

  Determine if the hard drives Sata or IDE. Go into the bios and see if the disks are disabled by accident. If you have verified all of this, and the drive is still not recognized, download the latest drivers from the website of the manufacturer of your motherboard chipset. Try to change the mode from AHCI to IDE in the bios.

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Train with webutil works with the browser, but not with webstart JNLP 12 c

  Hello

  I set up forms and reports suite 12 c according to the instructions and I'm testing my forms updated since version 10 g.

  In some forms, I use webutil.

  I can run forms without webutil with the browser or java web start (everything works fine).

  I have problems with the forms use webutil tha, they work very well with the browser, but not with java web start.

  When I run forms with webutil and webstart I see all white and the "crash" application: I must leave because other forms without webutil also do not work.

  Here is my config in formsweb.cfg:

  [Appws] <-start java web

  form = nomeform

  Archive = frmall.jar, frmicons.jar

  WebUtilArchive = jacob.jar, frmwebutil.jar

  WebUtilTrustInternal = true

  WebUtilLogging = off

  WebUtilLoggingDetail = normal

  WebUtilErrorMode = alert

  WebUtilDispatchMonitorInterval = 5

  WebUtilTrustInternal = true

  WebUtilMaxTransferSize = 16384

  baseHTML = webutilbase.htm

  baseHTMLjpi = webutiljpi.htm

  basejnlp = webutil.jnlp

  WebStart = on

  [appnows] <-no java web start

  shape = mercurio

  separateFrame = true

  Archive = frmall.jar, frmicons.jar

  WebUtilArchive = jacob.jar, frmwebutil.jar

  WebUtilTrustInternal = true

  WebUtilLogging = off

  WebUtilLoggingDetail = normal

  WebUtilErrorMode = alert

  WebUtilDispatchMonitorInterval = 5

  WebUtilTrustInternal = true

  WebUtilMaxTransferSize = 16384

  baseHTML = webutilbase.htm

  baseHTMLjpi = webutiljpi.htm

  basejnlp = webutil.jnlp

  What could be the problem?

  Gianpaolo

  Remove Appws:

  Archive = frmall.jar, frmicons.jar

  WebUtilArchive = jacob.jar, frmwebutil.jar

  baseHTML = webutilbase.htm

  baseHTMLjpi = webutiljpi.htm

  Add frmicons.jar and jacob.jar to $ORACLE_HOME/forms/java/extensions.jnlp.

  and try again.

  Concerning

• Reading video freezing/locking up during playback of files on the DISC to the PC, but NOT playing of EXTERNAL DRIVE!

  Engineering please help me to solve my problem of video playback.

  Machine: 3 years, HP PAVILION 1050ex g6, came with WIN 7 Home Premium (occasionally there was problem), now I changed to WIN 7 Ultimate SP1 (Now problem Regularly).

  System: Intel (r) CPU of Core i5 - 2410 M 2.30 GHz, 4 GB of RAM with the 64 bit OS.

  Chart: Intel(r) HD Graphics Family, (the age AMD) Radeon (TM) HD 6470 M, ATI card.

  PROBLEM:
  1 during playback of the files (at the time HD & low quality) video of MY PC, it STOPS for a few seconds or minutes and resumes playback sometimes normally, once as fast shipping sometimes very slow. Repeat the same thing a few minutes. Normally I use GOM or KMP players but I have tried VLC, Windows MP, K-lite classic MP (reading of low quality, but reduces the problem bit) same problem with all the players.

  2. all streaming (watch online cricket & football) and YouTube videos play very well (even the HD 1080 p).

  3 Compuetr LOCKING UP/freezing: while occasionally other programs running or opening files.

  State of the system during playback:
  CPU: 14 to 20%
  RAM: 40%

  Tried solutions:
  1 installed "Full of K-lite Codec pack" and "Shark", still the same problem.
  2 Ran guest and SFC/SCANNOW. not solved the problem.
  3. start in SAFEMODE, still the same problem.
  4. checked the EVENT VIEWER error are not.
  5. all drivers are up to DATE, (checked in Device Manager).
  6. Update Windows.
  7. unwanted applications that run in the background are all arrested through "MSCONFIG".

  PROBLEM SOLVED, Temp orarily.
  1. WHILE PLAYING THE SAME EXTERNAL DISK FILE. (SAME FILES ON MY PC ARE COPIED TO THE EXTERNAL HARD DRIVE (OR USB) AND PLAYED BY KMP & GOM PLAYER WITH WINDOWS IN NORMAL MODE, K-LITE SHARK & HAS BEEN UNINSTALLED, A FLUID, NO PROBLEM READING)

  Add info. : INTERNAL (PC) HARD DRIVE (500 GB), TOSHIBA, and TOSHIBA (1000 GB) EXTERNAL HARD DRIVE.

  Hard drive Test performed:
  1. right click "MY COMPUTER" 'Properties', 'Tools', 'Check now' restarts & "defragment now". The problem is not fixed.
  2 Ran invites and ' CHKDSK/C' & ' CHKDSK/F' The problem is not fixed.
  3 installed HP System Diagnostics UEFI & tried every test HARDWARE as subsequence-test, test drive... all tests are PASSED, but the problem not fixed.

  (My) Conclusion: Taking into account these 3 successful hard drive tests no sense of the evolution of the right of the hard drive? But I don't know is there any other test for hard drive or not. (noise of normal hard drive while the system is running & files more voluminous (PDF & MS Office) are open very quickly (by selecting multiple files & open together).)
  I took this as a CHALLENGE. A genius of the solution? Thanks in advance.

  Hello Rizwan,

  Thanks for the reply with the status of the issue and the required information on the subject.

  For more clarity on this issue, I would like to know the following information:

  1. When you stop playing video files of the computer disk, did it give any error message?

  2. did you of recent changes to the computer before this problem?

  Method 1: First try to reduce the hardware acceleration on the graphics card and check if it works very well.

  1. click on Start .

  2. click on Panel.

  3. click on appearance and personalization.

  4. click on customization.

  5. click on display settings.

  6. click on avancΘs.

  7. click on the tab troubleshooting.

  8. click on change settings.

  9. If you are prompted for an administrator password or for confirmation, type the password, or provide confirmation.

  10 move the hardware acceleration slider until it is one notch to the right of None. It is the basis of acceleration.

  11. click OK twice, and then close the window.

  If the problem is resolved when you set the cursor of None or Basicgraphic hardware acceleration, contact your hardware manufacturer to find out how to get and install the latest video driver for your video card.

  If you have already installed the latest video driver for your video card and that you continue to experience graphic issues with the graphics hardware acceleration set to Full cursor. However, move the graphics acceleration hardware cursor mouse a notch to the left until the issue no longer occurs.

  Method 2: If the problem persists, refer to the following article.

  Playing video files crashes or blocking Internet Explorer - Windows

  http://Support2.Microsoft.com/mats/video_freezes_or_crashes/en-us

  Hope this information helps, just reply to the State of the question to get help.

• Work of Auditors in the Simulator but not actually "BOLD"

  Hey - if anyone knows how to get a "BOLD" handset to allow listeners (PhoneListener, KeyListener, OutboundMessageListener) I would appreciate it. My app uses listeners and works very well in the Simulator, but only sporadically on the actual handset. Does anyone know how it works?

  See you soon,.

  Justin Dutoit

  I think you need to post a snippet of a listener of non-working, if you want to help more with this.

• Help! I did a movie with pictures on Movie Maker, played very well. Now, it's just to show Xs red in the photos of some, but not all. What I am doing wrong?

  I did a movie with pictures on Movie Maker and played very well.  Now, it's just to show Xs red in the photos of some, but not all.  What I am doing wrong?

  When you save your project, and then rename, move or delete a photo next time you open your project, you will see a red X where the photo was. Just a click with the right button on the X and select Remove then import your photo again under the new name or location and click on save project on the file menu.

  In the menu task under finished film click Save to my computer tracking instructions and your project will be saved as a movie.

• can not play the radio station, but sometimes it plays very well

  I noticed that I can not always the old Jill FM which is now Playlist 92.7 FM. Happened to me before that far from Jill FM, they changed. When I try to play live, sometimes it will play, but other times I get a pop up that sayscan not initialize the built-in player. Please press STOP and PLAY retry.

  But sometimes, it plays very well! That is what it is?

  Hello

  ·        What program do you use to listen to the radio?

  ·        Outside this station, you are able to play other stations without any problem?

  I suggest you play another station and check if the problem persists.

  If you use Internet Explorer, then I suggest you delete temporary files and cookies and check if the problem persists. Follow the steps mentioned in the articles below.

  How to remove the contents of the temporary Internet files folder

  http://support.Microsoft.com/kb/260897

  How to delete cookie files in Internet Explorer

  http://support.Microsoft.com/kb/278835

  I suggest to install the latest Adobe flash player on the system and check if the problem is resolved.

  http://www.Adobe.com

  Also, I would say to contact the Radio station support for assistance.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.