Works very well in the Simulator, but when it is installed through the Desktop Manager questions

Similar Questions

• CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server

  CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server, if anyone can help I would be grateful.

  There are major problems with this page as shown in the screenshot below.

  

  This is caused by a liberal hijacking of APDivs (aka layers) for a main page layout.  This isn't what APDivs were intended.  That's why Adobe them removed from DW.  Unfortunately, not soon enough.

  I think you're the best option is to start over with a pre-built CSS layout that doesn't contain positioned elements.

  Either way, Flash is dead now.  Most of the people cannot display Flash media more.  You can convert the HTML5 video or use YouTube to host videos now.

  Nancy O.

• Trapcode particular not showing on Render but works very well in the compose window

  Trapcode particular not showing on Render but works very well in the compose window.

  Hi do not know why it does not appear in my Render.

  My computer is not trolling, everything works fine.

  My computer specs:

  I7 - 5820 k

  GTX 970

  16 ram

  Composition window:

  

  Render:

  

  Try adjusting the comp on camera Active - this is what happens for rendering. I don't know where you got this name of camera or whether it was imported from a 3D rendering, but to be sure to always have the comp set to camera activates when you're overview of your work.

  The usual troubleshooting procedure is to go to the bottom of the list of changed properties and start reset first those most suspicious. Many times it is easier if you solo the layer in question.

  The first suspicious that I see, it is the position of your transmitter would be behind a normal camera to default position:

  

  If I add a camera by default to a model, add a solid, add individual and then use your position parameters the particles all move out of sight of the camera

  

  After a reset:

  

• Just upgraded to 10.0.2 and now he can't findwebsites - three that I know have been created with WordPress. IE & Chrome work very well - and the previous version of Firefox (10.0.1) also worked. Looking for a fix or I need to give up Firefox. Thank yo

  I get the following error message: gone the requested resource / is no longer available on this server and there is no forwarding address. Remove all references to this resource. Additionally, a 500 Internal Server Error error was encountered while trying to use an ErrorDocument directive to manage demand. IE & Chrome work very well - and the previous version of Firefox (10.0.1) also worked. Looking for a fix or I need to give up Firefox. Thank you.

  Found the problem - it's a HT Access file on the site itself. Deleted the file and 10.0.2 works very well.

• AOL will not sign some user accounts. But works very well for the Administrators account.

  AOL 9.6 works very well since XP account administrators but... any other account on the PC when AOL sign on it immeadiately can sign with "AOL had a problem and had to sign. Any ideas? AOL gave a bad scripted reload all the response of the AOL software.

  Thank you

  Hi Splinter1,
   
  Try the steps listed in the article below and check if it helps fix the problem:
  Having trouble accessing the AOL WebMail or AOL Mail based
  If this does not help, contact AOL support better.

• 2nd WVC54GCA works very well on the LAN, but I don't see it on the internet

  I recently bought a 2nd camera, so I can remotely monitor the 2 places home. The first camera that I put in place with the other default values that address static ip, I gave him, shipped port port 80 and when I type in my dynamic dns name like "http://myname.dyndns.org:80" it works very well, in fact I have same need to type the port number and it works. The dynamic dns used to take me direct to my configuration of routers (WRT54GL) but now I just type in: 8080 to the end to get to the configuration of the router to the internet. In any case, it works well and I can take pictures, live video monitor, movement detected email snaps etc. without any problem.

  Then I bought a 2nd WVC54GCA and together to the top of the same thing, he has assigned a static IP address and on the options page I activated the replacement web access port and left port 1024, port forwarded in the router with the new ip address and the port etc.  I can access the camera very well via a browser on my local network using the ip address: 1024 or the 'myname.dyndns.org:1024', but I can't access the cam 2nd via the net now. I am confused at this point, I didn't know that a second dynamic dns would be necessary since the device is configured to use a different port, and when I try using the ip address: 1024 it makes no difference anyway.

  Am I missing something here?

  What I thought was the problem wasn't, I had my port of port of port forwarding on the same number, and when you set the parameter port internal address port forwarding port, which is 80 in the case of the linksys cam.

  Once again that I realized that however, 1024 still wouldn't work, so I changed it to 8081 since my routers gui port is 8080, and I had to change the port setting to 81 in port forwarding and add: 81 to my dns address for it to work.

  Linksys should be ignored during the first 80 or some thing, or perhaps 80 is the default, because before when I wanted to join my router gui all outdoor I had was my dnyamic dns name without the: 8080, and when I added a cam to the network it would go directly to the cam, unless I specifically set : 8080 to the end.

  In any case, I have now the two cams work and accessible. For what it's worth, if there are people from linksys playback of this member of the Board they are terrible docco to explain things, the monitoring software is buggy as all get out and if I struggled as a computer scientist looks at work then the average schmoe stands little or no chance...

  My $.02

• Programs cannot connect to the internet, while IE8 and firefox work very well on the internet.

  I used google chrome as my default browser, but one day it stopped working, while firefox and IE always worked / work fine now.  When google chrome no longer works, all my programs stopped to connect to internet, like Skype, itunes, WMP, etc.  The itunes gives error me is "make sure that your network connection is active and try again.  When I download programs through to firefox or IE8, now my default, they download but used to install or connect to the internet (I tried to reinstall chrome after that deletion but it will not be completed).  I was certain this isn't the router or the Internet itself, my wireless works very well to navigate through the Internet and other computers on the network do not have this problem. problem when I connect to other wifi networks.  The help and support center will not be to the point after that I click on it.  I use windows xp sp3 home edition 2002.  I looked through the other threads to see if I can solve the problem, check the exceptions in the firewall, disabling firewalls and other security, running an antispyware/malware, someone suggested (super antispyware), lowered or disabled security settings, but all without success.  I don't know what to do at this point but to restart the system.  Please help, any suggestions?  Thanks in advance.

  Hi unlucky2013,

  Follow the steps from the link below: Windows XP Internet programs cannot connect to the Internet through the connection broadband:http://support.microsoft.com/kb/307164

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Tecra 8200 - works very well under Windows 98SE, but not on Windows 2000

  Hello

  I've updated my Tecra 8200 for Windows 98SE and Windows 2000.
  Windows 98SE, wireless connection works very well and I was able to access the internet through my SMC Barricade router.
  But on Windows 2000, this no longer works.
  The connection to the router is ok, but I am unable to connect to the internet or to the page web administration of the router.
  The Toshiba Wireless Client Manager provides the following information:
  Status:
  ------
  Connected to the network: SMC
  Connection: Excellent
  Access Point name:
  Channels: 2
  Encryption: on

  ----------- Warning ----------------
  Impossible to communicate with the AP.
  Please check the encryption and IRQ.

  Yet once, I insist on the fact that under Windows 98SE, everything worked well... an hour ago...

  I am running Windows 2000 SP4 with the latest updates.
  Could someone help?

  Thank you

  François

  Hello

  Thanks for the solution. I hope that the installation of Windows 2000 Service Pack 1 helped.

  Good bye

• iOS 9.3 do bluetooth hands-free connection to my Audi stuttering. Using google maps with instructions of the Tower burn on bluetooth still works very well. It's an iPhone 6. Another 6s to 9.2 iOS iPhone works very well with the hands-free bluetooth.

  iOS 9.3 made connection kit hands free bluetooth to my Audi stuttering.

  Both the speaker and the stuttering/pulse microphone so that you cannot speak/hear.

  Using googlemap-app with instructions of the Tower burn via bluetooth still works very well, his is perfect.

  It's an iPhone 6s and the car is an Audi A6 2010 with the Moose Bluetooth adapter business.

  Another 6s to 9.2 iOS iPhone works fine with bluetooth hands-free, just like my phone before the upgrade.

  I tried to disable the twinning, remove all old in the car and the iPhone and pair Bluetooth devices again.

  Anyone alse experinceing this?

  And tip on how to fix it?

  I have the same problem with Audi Q7 2008 and iPhone-6s - iOS - 9.3.

• F4580 works very well from the laptop but when I try to print something from mobile internet is blurry?

  Have run the HP Diagnostic print comes very well, very good copy.  The only problem is when I try to print something on the internet and then it's so blurry that it's barely readable.

  Hello Ann,.

  Allow me to quickly gather information about the issue in order to guide you in the right direction.

  1. what version of Windows is installed on the computer?

  2. what web browser do you use to print from the internet?

  3A this works much earlier?

  4 have have there been recent changes made on the computer before the show?

  I suggest you to refer to the links and check if it helps.

  Problems printing from the Internet

  I can't print or preview before printing a Web page in Internet Explorer

  Printing webpages: frequently asked questions

  Please post back with the results and we will be happy to help you further.

• Movie Maker file saved as WMV, stop playing the pictures, but the music continues to go. Works very well within the MM program.

  I created an image of 400 + (23 minutes) with video transitions in Movie Maker.  He plays very well through MM.  I recorded it on the computer (WMV file) but when I play this file, it starts fine, but then the pictures disappear but music keeps going.  Any suggestions?  Don on Windows Movie Maker running on Windows XP.  Only have 512 MB RAM but at least 60 GB hard drive.

  I created an image of 400 + (23 minutes) with video transitions in Movie Maker.  He plays very well through MM.  I recorded it on the computer (WMV file) but when I play this file, it starts fine, but then the pictures disappear but music keeps going.  Any suggestions?  Don on Windows Movie Maker running on Windows XP.  Only have 512 MB RAM but at least 60 GB hard drive.

  ===================================
  It is not uncommon that the large, complex projects
  to cause problems. Might be interesting to try to create
  more modest projects.

  Also it could be a problem with the compatibility of files.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, .wmv John Inzer - MS - MVP - Digital Media Experience

• Very slow internet connection on Win 7 on SSD, but works very well with the OS on the HARD disk and the mode safe on SSD

  Original title: network very slow connection on the current installation of Windows?

  So my situation is that I have two disks (SSD and HDD) who both have a Windows installation.

  Because this SSD is an I got free and is in used condition, I left my copy of Windows 7 intact on my mechanical failure of the SSD drive.

  Now the question is, my internet connection is very, very poor, unless I run in safe mode, or the installation on my mechanical drive.

  I use a wired connection, and our connection at home is limited to 120/10 mbit/s, while I have 5/10 at the most.

  I tried to replace the LAN drivers of my motherboard (MSI FM2-A85XA-G43) using both the driver disc that was bundled with my motherboard, Device Manager and the official site of MSI, I also checked my entire system using Malwarebytes, which detected 7 threats and were abducted, nothing helps.

  I also tried the DNS which did nothing either of hot flashes. Now notice what computer of my brother is also connected and works well.

  Now as I type this, I discovered that my speed has suddenly got stable again out of the blue, but I'm skeptical it will remain, so I still want to ask what is / was going on here.

  Thank you for your time.

  Sorry for the late response here, I've been very busy with the developments in the last days and completely focused on it.

  More than a week has passed since the problem disappeared as if by magic, and so far I don't see the signs of what is going on again.

  I think that the problem has passed away now, but if it arises again I will probably update this.

  Thanks for all the suggestions and your time in this issue.

• works very well on the shell, but not via cron

  Hello

  the ghettoVCB works pretty well on my vShpere 4.1 Standard Server run from console. My setup looks like this:

  vms2backup.conf: listed three VMs to backup

  I have a config file for each virtual machine. That looks like this:

  VM_BACKUP_VOLUME = / vmfs/volumes/VMBackup
  DISK_BACKUP_FORMAT = thin
  VM_BACKUP_ROTATION_COUNT = 3
  POWER_VM_DOWN_BEFORE_BACKUP = 0
  ENABLE_HARD_POWER_OFF = 0
  ITER_TO_WAIT_SHUTDOWN = 3
  POWER_DOWN_TIMEOUT = 5
  ENABLE_COMPRESSION = 0
  ADAPTER_FORMAT = ide
  VM_SNAPSHOT_MEMORY = 0
  VM_SNAPSHOT_QUIESCE = 0
  ENABLE_NON_PERSISTENT_NFS = 0
  UNMOUNT_NFS = 0
  NFS_SERVER = 172.30.0.195
  NFS_MOUNT = / nfsshare
  NFS_LOCAL_NAME = nfs_storage_backup
  NFS_VM_BACKUP_DIR = MyBackups
  SNAPSHOT_TIMEOUT = 15
  EMAIL_LOG = 1
  EMAIL_DEBUG = 1
  EMAIL_SERVER = mail.domain.com
  EMAIL_SERVER_PORT = 25
  [email protected]
  [email protected]

  The NFS part is not necessary.

  I start backing up shell like this: /ghettoVCB/ghettoVCB.sh f /ghettoVCB/vms2backup.conf-l /ghettoVCB/backup.log

  When from the backup of shell as mentioned above, everything works fine. In the end, I get an autoresponder email.

  But now, when I call this script with the same syntax via crontab, only the first two servers when saved and the script stops until the number of rotation shall take effect from the second server. If the third server is not saved and no e-mail is created.

  I have no idea until the problem could be. The hard disk is not full.

  Any ideas?

  Regards Wolfgang

  You can proceed as follows, re - run the script via cron but in your crontab entry, have it configured as follows, where you hit an error that is not connected:

  /ghettoVCB/ghettoVCB.sh f /ghettoVCB/vms2backup.conf-l /ghettoVCB/backup.log d debug - c /ghettoVCB > /ghettoVCB/ghettoDebug.txt

  It will redirect all the outputs generated during the race in /ghettoVCB/ghettoDebug.txt and see if there are errors.

• Just starting to use flash CC pro using a PC. The mouse does not work on all popup windows. It works very well on the selection of everything etc, but not on the pop-up windows? Any advice? Thanks, Jim

  Just starting to use flash CC pro using a PC. The mouse works on everything except the popup windows. Any advice? Thanks, Jim

  kglad and Mohan, thanks for the help. I found what was wrong. I had the text of the rule too high DPI screen. I lowered and the mouse works on everything except that it's harder for me to see.HA apparently it was causing a conflict with the mouse. Maybe this will be useful to help someone else down the line. Thanks again, Jim

• The rebels x3i (600 d) auto focus not working not not in Zone creation mode. Works very well in the basic modes.

  I bought a refurbished Canon Canon x3i after my extended warranty Ritz camera became useless and my xTi (400 d) died last summer. The camera has been excellent until very recently.

  About a week or two ago the autofocus stopped working. I think it all started when I decided to try the objective of refurbished Canon 50mm 1.8 that I bought on the internet. He has not worked for that lens, and has not worked in the design area since.

  There is an asterisk (*) in the lower left corner of the viewfinder. It is an indicator of progress of AE. There is no active focus. Sometimes, the nine of them will be light, but it doesn't mean anything.

  Based on responses from other posts on the forum, I tried different objectives EOS (I have two rebel film cameras) and I tried the LiveView. The same problem. I can live with the situation, but, obviously, I'd rather not.

  Naturally, the manual focus works fine.

  The pins on the camera look and feel fine - no elbows or broken bits. The pins look good, too, even the 50mm lenses.

  (I have not contacted Canon, yet, because the after-sales guarantees are usually 30 to 90 days, but I will contact them tomorrow)

  I don't think that you have found the free camera.  You MUST clear all settings.  Looks like you have memorization of commissioning.