Please advice me e @moto

Similar Questions

• You need permission to perform this action - field user with file rights. Please advice

  You need permission to perform this action - field user with file rights.

  I can't access folder on drive network even with domain administrator of error do 'you need permission to perform this action. "
  I would be very grateful if you could please advice, I can't change folder\files in this folder, even with admin rights.
  Thanks in advance
  Saad Ali

  Hello

  I suggest you post the same question in the Microsoft Technet forum for assistance. We have a team to help you with this guy's questions.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• I try to install my printer HP photosmart series C4500 it error please advice

  I try to install my printer HP photosmart series C4500 it error please advice

  I try to install my printer HP photosmart series C4500 it error please advice

• I want to buy adobe cc costume Middle East version for mac, please advice

  I want to buy adobe cc costume Middle East version for mac, please advice

  Hello

  Please visit Troubleshooting FAQ: what should I do if I have a subscription, but my application acts as if I had a trial? for the plans and prices.

  Hope that helps!

  Kind regards

  Sheena

• Dear CC Team, after cancellation of REVEL I perhaps need more space in the cloud (which was unlimited with REVEL upt to now). But I don't need tools more, PS and LR are perfectly sufficient for me. Please advice how I can extend my cloud storage? !! Kund

  Team dear CC,

  After cancellation of REVEL, I perhaps need more space in the cloud (which was unlimited with REVEL upt to now). But I don't need tools more, PS and LR are perfectly sufficient for me. Please advice how I can extend my cloud storage? !!

  Kind regards

  Henning Waschk

  Plan photography special includes 2 gigabytes of storage cloud

  Comprehensive plan includes 20Gig of storage cloud

  Team plan includes 100Gig of cloud storage

• Please advice how to disable and enable the sequence.

  Database 11.2.0.2
  OPERATING SYSTEM: AIX 6.1
  Please advice how to disable and enable the sequence.
  Kind regards
  Nathalie

  NATHALIE wrote:
  Database 11.2.0.2
  OPERATING SYSTEM: AIX 6.1
  Please advice how to disable and enable the sequence.
  Kind regards
  Nathalie
  huh?

  How can I ask a question in the forums?
  SQL and PL/SQL FAQ

  When all else fails, read the instructions very well. ACTIVATE & are documented (or not)

  http://docs.Oracle.com/CD/E11882_01/server.112/e26088/statements_2012.htm#SQLRF00817

  -----------------------------------------------------------------------------------------------------------------------------------------

  Thank you guru I'll follow your instructions...

  If Google also giving the same statement then not more GURUS!

• Please advice which product to use to create icons

  Please advice which product to use to create icons.

  Thank you

  Hi martin

  Try this one https://forums.adobe.com/thread/1247425

  concerning

  Deto

• Please advice. I'm new to VMware

  I need to get the hands on skills on VMware and want advice on the best way to do it. I was told to install vmware as the operating system. Please advise me in steps what I need to do to download vmware and install it on windows 7 or windows server 2008 R2?

  Any advice would be much appreciated.

  Welcome to the community - you can not install ESXi (the name of the VMware software) directly on a WIndows operating system - you will need to install something like VMware Workstation that allows you to create the virtual machine and install ESXi in this VM.

  Here is a link that shows how to do it- http://www.sysprobs.com/vmware-vsphere-4-esxi-4-windows-7-vmware-workstation-7-pc .

  You can google for other links-

• Paragraph tags and header forcing a line break in the AP element please advice

  Hello

  I bought Dreamweaver CS4 after attending an intro class at the College where we used an earlier version (macromedia 8). My main problem is that when I add images/text inside an AP element it automatically gives a space of one line which was not on the old version and also looks like this on preview. However, if I change the text to no jumps back up to where it should be, so im assuming its something in preferences. Please see attached for example image.

  I would be recognizing all the advice, as it is something I want to fix before you begin any project.

  James

  

  It has nothing to do with being in an AP element. By default, all browsers add margins for most items on level block, such as titles and paragraphs. The difference between CS4 and Dreamweaver 8 is that design in the new version gives you an idea much more clear of what the page will look like in a browser.

  You use CSS to adjust the margins on the titles and paragraphs. For example:

  h1, h2, h3 {
    margin-top: 0.25em;
    margin-bottom: 0.25em;
  }
  p {
    margin-top: 0;
    margin-bottom: 0.4em;
  }
  

  These style rules will reduce the gap between the title and paragraphs.

  If you're just undertakes a project with AP elements, take the time to read the following article. It might make you change your mind: http://apptools.com/examples/pagelayout101.php.

• Hello everyone please advice, LPT not start

  Hello I have a laptop MSI GX600 P, I have preinstalled the Windows vista family 32-bit premium, I have a problem now, because it takes a lot of effort to start the PC.

  Last semester in college I wanted to print with a printer UNI then since it is the network I thought why do not connect the ethernet cable and leave it to print. Appearentlly when I connected my BIOS file or smt else that I did not know was damaged and know every time that I have turn my PC and turn back, so that starting whenever he gives me the message ' master slave does not respond ' or "failed to start" photo here http://https://picasaweb.google.com/101787533041897747021/Error?authkey=Gv1sRgCIiWnN-RsbSuZQ# . I tried to reinstall new windows free, fail safe recovery, System Restore, restore default faktory, uninstall the ethernet card, but nothing works, the only thing I've tried is an E-Sata cable connection and clear the entire HARD disk?
  What should I please advise, because he kills me, I want to break my LPT in the wall for such things.

  Hello kluonius,

  1. have you checked if the CD/DVD drive appears in the BIOS?

  2. have you checked if the boot priority is set to the CD/DVD drive?

  Also, if you try to boot from the USB and CD player, I suggest that you change the boot priority.

  This can happen if the priority of the Boot in the BIOS is not configured to boot from CD/DVD as first boot device, of difficulty, change the first boot device in the BIOS as the CD/DVD drive.

  You can see the article that will give you information on access to the BIOS options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Change the settings to boot from the CD/DVD drive.

  Note: I suggest you contact your computer manufacturer if you are not comfortable performing these steps.

  WARNING OF THE BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.

  You can also try to change the IDE cables. If you are not comfortable performing these steps, you can contact your computer manufacturer.

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• Please advice of blackBerry Smartphones. :)

  Hello

  I'll try to do this to the point.

  Yesterday, my Blackberry Curve has had an accident with a vinaigrette.  He died, I called my service provider and since I have not had it for a year, k its going to cost me a lot of money to replace.  My teenage daughter has give an old Blackberry Torch a year ago and I took it out ad charged today.  Seems to work fine, except... Put my SIM card in it, and its only accepts no not my Blackberry ID.  I confirmed that my username and password are correct by logging in on the laptop.  I believe it's security for stolen phones, but short in him asking to put I have its ID is a way I can fix it?  I do not have his old SIM card, if to do a reset with my SIM in there, I'm afraid I'll lose all my data.

  Is there something wrong with me using this phone - it's not stolen and found assure you - she has given us.  In my view, there is an option to do a reset, but I'm afraid with my SIM card in there that I won't lose all my stored data.

  Advice?

  Hi pennylane70

  Welcome to the Forums of the BlackBerry Support

  No there is nothing wrong in the use of BlackBerry of your daughter.

  A few points I would like to add, that you are missing or not aware of.

• SALVATION is Reddy, user-> IOM-> OID, please advice on this matter

  I created the user to IOM (11.1.2) but user shows under groups in OID (OVD) instead of pointing to the user, DN checked was correct. Help, please

  Open the /db/LDAPContainerRules.xml file and check your rules of container.  It must be bad:

  http://docs.Oracle.com/CD/E14571_01/doc.1111/e14309/cust_ldap.htm

  Country = US, locality name = BITTER

  l = bitter, dc = oracle, dc = com

  Country = IN, name of locality = APAC

  l = apac, dc = oracle, dc = com

  By default

  l = users, dc = oracle, dc = com

  Region = AMER

  l = bitter, OU = role, dc = oracle, dc = com

  Region = APAC

  l = apac, UO role, oracle = dc =, dc = com

  By default

  l = roles, dc = oracle, dc = com

• Installation problem on OSX Mountain Lion Jdev, please advice

  Hi all

  I tried to install the 121200 JDeveloper Suite on my MacBook Air running OSX 10.8.5 Lion mountain for a few days but did not succeed.

  I read each installation guide I could find, but still have not been able to make it work.

  Does anyone have any advice for me, I really need to install this to be able to do the homework that we receive from the school.

  Thanks in advance,

  Kristoffer

  Hello

  just installed the same yesterday without problem. Make sure you download the generic installation program (aka the JAR Installer). Then install Java 7 on your MAC and make sure it's the version of Java by default (of type java-version on the terminal). Then call java-jar .jar in the directory that you copied the downloaded files (by default, it is called "Download"). Wait for the pop up setup (may take a few minutes), and then install JDeveloper. The installation directory then has a JDeveloper / JDev folder that contains the start icon to use to start the IDE

  Frank

• You try to start the process J000 has expired. Please advice

  Dear team,
  
  I get lines in my .ora alert log file, and users report that they were not able to connect the database for three hours,
  
  
  
  
  Completed: alter database backup controlfile to trace
  Wed Jul 18 20:06:22 2012
  Beginning log switch checkpoint up to RBA [0x4389.2.10], RCS: 0x0873.dba119bf
  Wed Jul 18 20:06:22 2012
  Arc1: Evaluating archive log 2 thread 1 sequence 17288
  Arc1: Begins to archive log 2 thread 1 sequence 17288
  Creating destination LOG_ARCHIVE_DEST_1 archives: ' / ora_drplive/arch/drplive/1_17288.arc'
  Wed Jul 18 20:06:22 2012
  Thread 1 Advanced to record the sequence 17289
  Currently Journal # 3 seq # 17289 mem # 0: /ora_drplive/log/drplive/redo03.log
  Currently Journal # 3 seq # 17289 mem # 1: /ora_drplive/logmirror/drplive/redo03.log
  Wed Jul 18 20:06:22 2012
  Arc1: Archiving newspaper wire 2 1 sequence complete 17288
  Wed Jul 18 20:37:15 2012
  Filled checkpoint up to RBA [0x4389.2.10], RCS: 0x0873.dba119bf
  Thu Jul 19 04:36:08 2012
  You try to start the process J000 has expired.
  Thu Jul 19 04:38:15 2012
  You try to start the process J000 has expired.
  Thu Jul 19 04:40:21 2012
  
  
  
  
  I checked some view as
  
  
  SQL > select * from v$ resource_limit;
  
  RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION INITIAL_AL LIMIT_VALU
  ------------------------------ ------------------- --------------- ---------- ----------
  process of 49 50 50 50
  51 59 60 60 sessions
  10 20 810 810 enqueue_locks
  10 75 8000 UNLIMITED enqueue_resources
  ges_procs 0 0 0 0
  ges_ress 0 0 0 UNLIMITED
  ges_locks 0 0 0 UNLIMITED
  ges_cache_ress 0 0 0 UNLIMITED
  ges_reg_msgs 0 0 0 UNLIMITED
  ges_big_msgs 0 0 0 UNLIMITED
  ges_rsv_msgs 0 0 0 0
  
  
  SQL > show parameter JOB_QUEUE_PROCESSES
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  JOB_QUEUE_PROCESSES integer 10
  
  
  
  Please sometimes what to check, how to solve this problem, because it comes every night, full backup also arrive and script to archive clean also run during the night.

  YM says:
  Uh,.
  I'm sorry Osama I don't see your answer. Excuse me...

  No problem.

• questions to move a column name as parameter. Please advice.

  Hi all
  
  I have some difficulties with oracle reports. I am a novice with the beginner 2 days.
  I am not able to use the lexical settings in reports. my query is as easy as
  
  Select & column-name abc xyz;
  
  I tried to make a setting before creating the SQL but I always get the error saying that ORA-00922: lack of expression.
  also I tried with bind variables like
  
  Select: col_name abc xyz;
  
  but it gives a: inplace Column of records the data.
  
  some could help me with step by step procedure to create a lexical parameter.
  
  I am using reports 6i.
  
  Please let me know for details.
  
  Thanks in advance!

  Hello

  I suggest you create a sing an example 'Basic' of the EMP table: (see the demobld.sql script provided with Developer Suite to create this table)

  Create a new report
  Create a COLUMN name parameter:
  Name = COLNAME
  DataType = character
  Width = 20
  Initial value = ENAME

  Create a SQL query: select & emp colname

  Create a page layout manually or with the wizard

  Click on the button «Run paper Layout»

  Enter a valid value for the 'column' name (ENAME / JOB / SAL / COMM /...)

  Concerning