SALVATION is Reddy, user-> IOM-> OID, please advice on this matter

Similar Questions

• You need permission to perform this action - field user with file rights. Please advice

  You need permission to perform this action - field user with file rights.

  I can't access folder on drive network even with domain administrator of error do 'you need permission to perform this action. "
  I would be very grateful if you could please advice, I can't change folder\files in this folder, even with admin rights.
  Thanks in advance
  Saad Ali

  Hello

  I suggest you post the same question in the Microsoft Technet forum for assistance. We have a team to help you with this guy's questions.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Problems during commissioning user IOM to AD

  Hello
  My version of the IOM is 9.1.0.1 & AD version is 9.1.1.4
  So I want to provision user IOM to AD, before commissioning, I ran AD research Recon group &
  Ad organization looking for Recon.
  When I tried to provision AD user to user of IOM, State = in service where the Validation of the system has been
  filled and create the user was rejected and there was no description of the response.
  Here is the error I got on the console: java.lang.reflect.InvocationTargetException
  
  Thanks and greetings
  Rahul Shah

  Hello Rahul,

  I encountered this problem before.

  Please use weblogic 10.3.1.0 with 9.1.0.1 like weblogic 10.3.3.0 IOM. is not certified with IOM 9.1.0.1.

  I hope this helps.

  Sunil Kumar

• I try to install my printer HP photosmart series C4500 it error please advice

  I try to install my printer HP photosmart series C4500 it error please advice

  I try to install my printer HP photosmart series C4500 it error please advice

• I want to buy adobe cc costume Middle East version for mac, please advice

  I want to buy adobe cc costume Middle East version for mac, please advice

  Hello

  Please visit Troubleshooting FAQ: what should I do if I have a subscription, but my application acts as if I had a trial? for the plans and prices.

  Hope that helps!

  Kind regards

  Sheena

• Dear CC Team, after cancellation of REVEL I perhaps need more space in the cloud (which was unlimited with REVEL upt to now). But I don't need tools more, PS and LR are perfectly sufficient for me. Please advice how I can extend my cloud storage? !! Kund

  Team dear CC,

  After cancellation of REVEL, I perhaps need more space in the cloud (which was unlimited with REVEL upt to now). But I don't need tools more, PS and LR are perfectly sufficient for me. Please advice how I can extend my cloud storage? !!

  Kind regards

  Henning Waschk

  Plan photography special includes 2 gigabytes of storage cloud

  Comprehensive plan includes 20Gig of storage cloud

  Team plan includes 100Gig of cloud storage

• Please advice how to disable and enable the sequence.

  Database 11.2.0.2
  OPERATING SYSTEM: AIX 6.1
  Please advice how to disable and enable the sequence.
  Kind regards
  Nathalie

  NATHALIE wrote:
  Database 11.2.0.2
  OPERATING SYSTEM: AIX 6.1
  Please advice how to disable and enable the sequence.
  Kind regards
  Nathalie
  huh?

  How can I ask a question in the forums?
  SQL and PL/SQL FAQ

  When all else fails, read the instructions very well. ACTIVATE & are documented (or not)

  http://docs.Oracle.com/CD/E11882_01/server.112/e26088/statements_2012.htm#SQLRF00817

  -----------------------------------------------------------------------------------------------------------------------------------------

  Thank you guru I'll follow your instructions...

  If Google also giving the same statement then not more GURUS!

• Please advice which product to use to create icons

  Please advice which product to use to create icons.

  Thank you

  Hi martin

  Try this one https://forums.adobe.com/thread/1247425

  concerning

  Deto

• IOM - call adapter when edit user IOM

  How to call an adapter when change a field on the form user IOM?
  I tried assing the adapter on the definition of process 'user xellerate. What is the name of the task to assign the adapter? I tried with several names, but was unsuccessful.

  For the field that you want to trigger your Java Code.

  Assume that the first name, then create a task with the name of "change of name".

  and to make its entry in the 'Lookup.USR_PROCESS_TRIGGERS' if not exists.

• Error trying to configure user IOM to Active Directory by using SSL

  Hi all
  
  I am able to see users through LDAP over SSL browser but get the following error trying to configure users IOM to RFA by using SSL.
  
  I use Microsoft Active Directory 9.11 connector type.
  
  Answer: Connection error encountered
  Description of the response: error occurred when connecting to the target system
  
  I did a few tests using the "diagnostic dashboard" and here are the results.
  
  Name of the test: target system SSL verification of approval: past
  Name of the test: test basic connectivity: failure
  
  Exceptions:
  

  ITResource of the informative values are not correct. Enter the correct values.
  java.lang.reflect.InvocationTargetException
  javax.naming.CommunicationException: simple bind failed:
  Unable to find the path of valid certification for target asked.

  Name of the test: Test commissioning: failure
  
  Note: Without SLL got past all of the above tests.
  
  
  Can someone help me with this question.
  
  Thanks in advance.
  
  Pradeep Kumar.

  It shows clearly that it is not able to connectto AD to the SSL port.

  What are the values you gave in ADITResource as port no. * 636 * and SSL enabled true/yes etc.

  Are you sure that your certificate is correct and you are able to connect to AD to the port 636?

  JXplorer can test SSL...

• Need advice on this Toshiba laptop to get

  Hello

  Just joined and hope im this ad in the right place. I need advice on this Toshiba laptop to get. It will be used for photo editing. Must have a 15/16 screen. Big screen would be nice. Programs that I run are Adobe and Photoshop light room. I use a wacom tablet with 2 external hard drives. It will be used manly at home and in the studio.

  Thank you very much

  Hi Tacker

  In general I think that the best option for you is to buy notebook series Satellite A. Something like Satellite A665. It's very nice for laptop with good material and enough performance that you can use for your work.

  I prefer laptops with bigger screen so for years I use Satellite P laptops with screens of 17 or 18. Right now I use the Satellite P500. It's the big machine. For me the best Toshiba laptop, I had over the past 10 years.

  When you have a little time to visit Toshiba page for your country and check which models Satellite are available in your country. Choose the one with the better graphics chip, enough Ram and, of course the HARD drive with enough capacity.

  Please be so kind and post comments. It will be nice to read what you think of this.

• autologin Windows 7 without box "users must enter a user name and password to use this computer"

  My dialog box user accounts does not the box "users must enter a user name and password to use this computer" and how do I turn it on?

  Hello Russ,

  You can continue with the following steps to support.  However, if your computer is on a domain, unfortunately, there's nothing we can do.  You will need to contact the system/network administrator.  TechNet forums can be beneficial for a resolution on your http://social.technet.microsoft.com/Forums/en-us/category/w7itproinquiry.  Please create a Restore Point and backup of the registry before proceeding.

  1. click on start, run, type regedit, and then click OK.
  2. look for the following registry key:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon
  3. with the help of your account name and password, double-click the DefaultUserName entry, type your user name, and then click OK.
  4. double-click the DefaultPassword entry, type your password in the value data box, and then click OK.

  If there is no DefaultPassword value, create the value. To do this, follow these steps: a. in the registry editor, click on edit, click New, and then click String value.
  b. Type DefaultPassword as the value name, and press ENTER.
  c. double-click the newly created key, and then type your password in the value data box.
  If no DefaultPassword string is specified, Windows XP automatically changes the value of the AutoAdminLogon registry key by replacing 1 (true) to 0 (false) to turn off the AutoAdminLogon feature.
  5 double-click the AutoAdminLogon entry, type 1 in the value data box, and then click OK.

  If there is no AutoAdminLogon entry, create the entry. To do this, follow these steps: a. in the registry editor, click on edit, click New, and then click String value.
  b. type AutoAdminLogon as the value name, and press ENTER.
  c. double-click the newly created key, and then type 1 in the value data box.
   
  6. exit the registry editor.
  7. click on start, click on restart and then click OK.

  I hope that this information is beneficial

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• the API call error: error: the user has sufficient privileges to perform this API call.

  Hello

  I'm exploring cloudClient 3.4.1 but I'm trying to run a "vra catalog list" command or other similar commands I get the error "error: the user has sufficient privileges to perform this API call."

  I don't know what are the permissions of system requirements before I can make the API call because the account which I use to make these calls already have privileges to Administrator local on box of IAAS & is admin Admin/tenant IAAS. In short, the user is a full administrator of the tool.

  Please help me because I found there is a documentation for the usability of the cloudclient.

  Thank you

  MG

  Is the account of your help to make the law of all items in the catalog API call? We have users from the normal group of activities that use the API does not have system or administrator access.

• I have a subscription to creative cloud for 2 other colleagues and myself, but cannot add 2 other colleagues as users. How can I do this?

  I have a subscription to creative cloud for 2 other colleagues and myself, but cannot add 2 other colleagues as users. How can I do this?

  American salvation,

  I checked your account and found that you have just 1 place in your creative cloud account. You must add a license from the upper right corner on your team admin page.

  You can follow the article: CC help | Manage your creative cloud to the membership of the teams who will help you add a license in your team account.

  Let us know if you face any trouble while doing this.

  Thank you

  Yann Arora

• I own a Macbook pro mid 2012. Now I want to increase the RAM of 4 GB to 8 GB, please suggest if this update will help me to improve my performance to macbook.

  I own a Macbook pro mid 2012. Now I want to increase the RAM of 4 GB to 8 GB, please suggest if this update will help me to improve my performance to macbook.

  It will help in cases where the applications require more than 4 GB of RAM.  Otherwise, there will be no noticeable difference.  If you really want to increase the speed, an SSD is the best option.  They cost about 3 x's + more than a traditional HDD of same capacity...

  Ciao.