Please explain errors in code 24

Similar Questions

• I have this error: Exit Code: 6

  When I reinstall my Adobe Web premium cs5.5 on my computer, I have this error:

  Exit code: 6

  Please see the faults and warnings below for troubleshooting.

  For example, ERROR: DS013, DW050... WARNING: DF029, DS013...

  

  I try twice and it does not work.

  I had to install my Adobe web premieuim because my flash software destroy all the fla files (see the message)

  

  Is that someone can help me?

  Hi,

  Please see errors ' Exit Code: 6 "," Exit Code: 7 "|"» CS5.5 CC, CS6, and error 'Output 6' or ' exit 7 "|"» Install log | Read, write, file system errors. CS5, CS5.5

  Hope that helps!

  Kind regards

  Sheena

• Please explain CVI question #335358: using the operator of bit-shift twice on the same line of code produces incorrect results

  Hello

  I just stumbled on http://www.ni.com/white-paper/12323/en#335358_by_Category.

  With the help of the bit-shift operator twice on the same line of code produces incorrect results.
  Workaround: Separate the operations of shift of two bits in two distinct lines of code.

  Reported Version: 9.0

  Solved Version: N/A

  Added the: 14/02/2012

  Could someone please explain what kind of construction causes such a question?

  I have not noticed problems again and not have not noticed or found a thread about it.

  Thank you.

  The reported scenario looks like this:

  unsigned int a = 1, b = 62;
  unsigned  long long result = 1ULL << a << b;
  

  The problem arises because of the temporary variable used when do two little is placed in the same line. This separation into two lines will produce correct results:

  unsigned int a = 1, b = 62;
  unsigned  long long result = 1ULL << a;
  result = result << b;
  

• I have an error in my event viewer: the fault bucket + 45216 0xD1_athr, type the name of the event 0: BlueScreen. Can someone please explain to me how to solve this problem.

  I have an error in my event viewer: the fault bucket + 45216 0xD1_athr, type the name of the event 0: BlueScreen

  Can someone please explain to me how to solve this problem. My computer shuts down whenever I get on the internet. I need some answers please.

  You have a problem with a driver Atheros.

  It could be the network card is bad or the driver is damaged.

  If it is a wireless card, try to connect to the router with an ethernet cable. See if you can get an updated driver from the computer manufacturer's website.

  http://msdn.Microsoft.com/en-us/library/ff560244 (v = VS. 85) .aspx

• Windows Update keeps just check updates, when I run the fixit utility, I had error, update code error 0 x 80070005(2015-08-01-T-09_15_07P). Help, please.

  Windows Update keeps just check updates, when I run the fixit utility, I had error, update code error 0 x 80070005(2015-08-01-T-09_15_07P).  Help, please.

  The last thing installed on windows update is Windows Update Agent 7.6.7600.320, but it seems to have installed correctly.  I tried a lot of different things in the forums, but nothing works.  Please notify.  Thank you.

  Just found the solution.  I needed to update my version of Internet Explorer.  I used 8 and just updated to 11.  Problem solved.  Updates work again.

• I tried to install Adobe Illustrator but I have an error Exit Code: 6 please see specific errors below for troubleshooting. For example, ERROR: - summary - 0 fatal er

  Exit Code: 6 Please see specific errors below for troubleshooting. For example,  ERROR:   -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 4 error(s)    ----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20} -----------  ERROR: Third party payload installer vcredist_x64.exe failed with exit code: -2147024546  ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\amorales\AppData\Local\Temp\{6A3B9341-4D14-415F-8A21-85327165545E}\Illustrator_18_LS20_win64\Adobe Illustrator CC 2014\payloads\Microsoft VC 2012 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x64) from Microsoft website - www.microsoft.com  ----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------  ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546  ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\amorales\AppData\Local\Temp\{6A3B9341-4D14-415F-8A21-85327165545E}\Illustrator_18_LS20_win64\Adobe Illustrator CC 2014\payloads\Microsoft VC 2012 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x86) from Microsoft website - www.microsoft.com  ------------------------------------------------------------------------------------- 

  Errors ' Exit Code: 6, "" Exit Code: 7 ".

  Mylenium

• Please explain this part of the code

  CREATE OR REPLACE PROCEDURE IS abc123
  -Statements
  v_T_MAP_record T_MAP_map % ROWTYPE;
  
  TYPE t_element_cursor IS REF CURSOR;
  v_T_MAP_cursor t_element_cursor;
  
  number of v_T_MAP_count;
  BEGIN
  DBMS_OUTPUT. ENABLE (1000000);
  v_T_MAP_cursor: = get_T_MAPs (1308); -This will get the record of the cursor
  
  -Open the cursor
  EXTRACTION v_T_MAP_cursor
  IN v_T_MAP_record;
  
  V_T_MAP_cursor % FOUND LOOP
  
  dbms_output.put_line ('uc.use_case_id: ' | v_T_MAP_record.use_case_id);
  
  
  v_T_MAP_count: = v_T_MAP_count + 1;
  
  EXTRACTION v_T_MAP_cursor
  IN v_T_MAP_record;
  
  END LOOP;
  
  -Close the cursor
  CLOSE V_T_MAP_cursor;
  
  EXCEPTION
  While OTHERS THEN
  dbms_output.put_line ('Error' |) TO_CHAR (SQLCODE) | ': ' || SQLERRM);
  END;
  
  I do not understand why we are having 2 game instruction Fetch IN v_T_MAP_record's first before the while loop v_T_MAP_cursor and the other inside the v_T_MAP_cursor. Please explain. If I remove the second instruction fetch inside the loop, it gives me a buffer overflow error.

  It's what he does...

  CREATE OR REPLACE PROCEDURE abc123  IS
      --Variable declarations
      v_T_MAP_record T_MAP_map%ROWTYPE;
  
      TYPE t_element_cursor IS REF CURSOR;
      v_T_MAP_cursor t_element_cursor;
  
      v_T_MAP_count number;
    BEGIN
      DBMS_OUTPUT.ENABLE(1000000);  -- THIS ISN'T REALLY NEEDED
  
      -- This opens the ref cursor, it doesn't fetch anything (assuming get_T_MAPs doesn't fetch itself)
      v_T_MAP_cursor := get_T_MAPs(1308);
  
      -- This fetches the first record from the cursor
      FETCH v_T_MAP_cursor
        INTO v_T_MAP_record;
  
      -- If a record is found we enter a loop
      WHILE v_T_MAP_cursor%FOUND LOOP
        -- output the current record details
        dbms_output.put_line('uc.use_case_id: '||v_T_MAP_record.use_case_id);
        v_T_MAP_count := v_T_MAP_count + 1;
  
        -- fetch the next record
        FETCH v_T_MAP_cursor
          INTO v_T_MAP_record;
        -- loop back to the start of the while loop
      END LOOP;
  
      --Close the cursor
      CLOSE v_T_MAP_cursor;
  
    -- Pointless stupid exception handler
    EXCEPTION
      when OTHERS THEN
        dbms_output.put_line('Error ' || TO_CHAR(SQLCODE) || ': ' || SQLERRM);
    END;
  

  Although this would be a better style:

  CREATE OR REPLACE PROCEDURE abc123  IS
    --Variable declarations
    v_T_MAP_record T_MAP_map%ROWTYPE;
    TYPE t_element_cursor IS REF CURSOR;
    v_T_MAP_cursor t_element_cursor;
    v_T_MAP_count number;
  BEGIN
    -- This opens the ref cursor, it doesn't fetch anything (assuming get_T_MAPs doesn't fetch itself)
    v_T_MAP_cursor := get_T_MAPs(1308);
  
    LOOP
      -- This fetches the first/next record from the cursor
      FETCH v_T_MAP_cursor INTO v_T_MAP_record;
      EXIT WHEN v_T_MAP_cursor%NOTFOUND;
  
      dbms_output.put_line('uc.use_case_id: '||v_T_MAP_record.use_case_id);
      v_T_MAP_count := v_T_MAP_count + 1;
    END LOOP;
  
    --Close the cursor
    CLOSE v_T_MAP_cursor;
  END;
  

  However, I would also change things to use the SYS_REFCURSOR as the need to define your own type from the REF CURSOR was placed back in 9i with the new type built in SYS_REFCURSOR.
  There are probably many other things I would like examine why I'm using ref Cursor in the first place and why I try to write data using dbms_output etc., but hey, we all have start somewhere.

  Published by: BluShadow on 28-Sep-2012 14:28

• Explain please, copy the following code to ItemChangeEffect

  Hi all
  itemChangeEffect was so easy to implement in Flex 2, but 3 is not easy to dt.
  
  A very good programmer has written an example to implement in Flex 3
  http://astrois.info/Article_ItemsChangeEffect/
  
  Please see the Source of the Application
  I did not understand his reconstructCopyColl()
  Please explain
  
  
  2ndly
  I want to use this method in my image gallery
  And I need your help to add this method inside itemChangeEffect
  
  I have an ArrayCollection collection that contains the data of my images.
  I use the filter function to display images in my category.
  
  So please guide me, how can I do the thing above for my tilelist?
  
  
  Thanks in advance

  "manofspirit" wrote in message
  News:gi8pin$MH4$1@forums. Macromedia.com...
  > I took an example of blog.flexexamples filter function
  > and I added itemChangeEffect in there.
  > Now, you can see that when filter us elements, it does not work
  >
  > Please check and guide me
  > Thanks again
  >
  >
  >
  ' > http://www.adobe.com/2006/mxml '.
  > layout = "vertical".
  > verticalAlign = "middle".
  > backgroundColor = "white".
  > creationComplete = "init (); » >
  >
  >
  > > import mx.events.SliderEvent;
  >
  > private function init (): void {}
  > If {(checkBox.selected)
  > arrColl.filterFunction = sliderFilterFunc;
  > arrColl.refresh ();
  > }
  > }
  >
  > private void checkBox_change(evt:Event):void {}
  > If {(checkBox.selected)
  > arrColl.filterFunction = sliderFilterFunc;
  >} else {}
  > arrColl.filterFunction = null;
  > }
  > arrColl.refresh ();
  > }
  >
  > private void slider_change(evt:SliderEvent):void {}
  > arrColl.refresh ();
  > }
  >
  > private void sliderFilterFunc(item:Object):Boolean {}
  > var minSlider:uint = slider.values [0];
  > var maxSlider:uint = slider.values [1];
  > If ((item.value > = minSlider) &)
  > (item.value<= maxslider))="">
  > return true;
  >} else {}
  > return false;
  > }
  > }
  > ]]>
  >
  >
  > fadeOutDuration = "500" / >
  >
  >
  >
  >
  >
  >
  >
  >
  >
  >
  >
  >
  >
  >
  >
  >
  >
  >
  >
  >
  >
  >
  > selected = "true".
  > Exchange = "checkBox_change (event); "/ >
  >
  >
  >
  > minimum = "0".
  > maximum = "1000".
  > values = "[0,1000]."
  > labels = "[0,500,1000]".
  > thumbCount = "2".
  > showTrackHighlight = "true".
  > snapInterval = "1".
  > tickInterval = "100".
  > liveDragging = "true".
  > Exchange = "slider_change (event); "/ >
  >
  >
  >
  >
  >
  >
  > dataProvider = "{arrColl}.
  > verticalScrollPolicy = "on" / >
  >
  >
  >
  >

  I went through the infrastructure code, and what is happening here, is that they have not
  include code to run the effect if the CollectionEventKind =
  CollectionEventKind.REFRESH. What is the code that you found trying to do is to
  generate a bunch of delete and add events instead.

  You can try to simply extend TileList and replace the protected function
  collectionChangeHander to add a call to prepareDataEffect after calling
  super.collectionChangeHander (event) if CollectionEventKind =
  CollectionEventKind.REFRESH. you can find well there's a reason why they
  left it in this case if you make this change.

  You can also try to create a ListCollectionView that you point to another
  ListCollectionView and try to trigger reset. Something like:

  sourceListCollectionView.filterFunction = please
  sourceListCollectionView.refresh ();
  dataProviderListCollectionView = sourceListCollectionView;

  You can also try the ListCollectionView source filtering instead of
  ListCollectionView itself (for example, Array has a filter method. You
  could create a table that contains the entire data source and keep
  building of new arrays with elements filtered into them and reset of the
  source of ListCollectionView. This will certainly trigger a reset on
  the TileList.

  HTH;

  Amy

• Please explain these codes...

  private var minefield: Array = new Array();

  public void Main() {}

  creation of mine field

  for (var i: uint = 0; i < FIELD_H; i ++) {}

  minefield [i] = new Array();

  for (var j: uint = 0; j < FIELD_W; j ++) {}

  mineField [i] .push (0);

  }

  trace ("line" + i + ":" + mineField [i]);

  }

  trace ("' the entire field of mines:" + minefield ");

  end of the creation of mine field

  }

  It is a system of multiple table. I copied it from the book of game design. I would like to explain:

  "Why to track'"mine field' is 81 zeros?""

  OK, I predict (I understand the book), this minefield private var table is table of i and j

  ...

  I also understood that mineField [i] is an array containing only the loop i ("0,1,2,3,4,5,6,7,8")

  ... and mineField [i] .push (0) changes all i - s in the table to 0?

  Please, explain, everything is mixed in my head together

  I do not know that try to explain it will make clearer for you, but here's a shot of her...

  minefield is used as a multidimensional array, or in other words, it's an array with arrays.

  In the loop by using 'i', each element of the minefield is assigned a new array in this line:

  minefield [i] = new Array();

  For the "j" loop, each element of the new array is assigned a value of 0 in this line.

  mineField [i] .push (0);

  The only values being assigned to arrays is 0, no 0,1,2,3,4,5,6,7,8,9

  The last line is followed 81 most likely zeros because FIELD_H and FIELD_W are both equal to 9.  Each element of the mines is a table with 9 zeros, so when you say that it trace the table it traces each element of this array, separated by commas.  Given that each element of this array is another table, it traces the separated by commas, as well.

  What this last trace is actually followed is 9 paintings, each containing 9 zeros.

• C410a all in OnePrinter: what is error Situation Code 12522209

  The charge of computer software was successful. When you set up the printer, error Situation Code 12522209 came and still can not print or use other functions of the printer. What does the acronym for the Code number.

  Winfro

  Hey @winfro,

  Welcome to the Forums of HP Support!

  I see that you see an error code associated with your Photosmart Premium Fax e-all-in-one printer. I can help you with that, but I'll need some information first. Please let me know where you see this code. Once I know that I will be better able to help you.

• Please explain to me the Structure of elements in Place.

  Please explain to me as you would explain a small child the Structure of elements in Place.

  

  I have some difficulties to understand this structure.

  The use of speed and memory optimization? Why Labview does not automatically in the background?

  Is there a situation that you don't want to optimize the memory usage?

  If please make me better understand and praise will be given

  Alex et al..,.

  Structure of the Inplace element was introduced back in BT 8 (do not remember exact version). From LV 8.6 after 2009 and 2010, NOR brought significant changes to the way in which the block diagram is compiled into executable code (requiring the RTE of LV).

  Experience shows that the use of the current versions of LV (2010 and following), the Structure of the element Inplace doesn't have much beneficial effect as the compiler (GER) optimizes already most of the situations where performance could be increased; honestly, in some situations, the use of this structure is TOfold performance because the compiler must optimize the NOT on its own within this structure.

  Still, there are a few cases where this structure can improve the keys to performance (such as the use of memory) when used with caution. And there are some cases where you use this structure, namely when using data value references.

  hope this helps,

  Norbert

  EDIT: You can start here for more information on compiler optimization performed by the compiler to the LV. Please note that those can rely on the setting 'Allow debugging' from the VI.

• Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error." _

  RALink - network - 802.11n/b/g Wireless LAN USB 2.0 Mini adapter 379ko

  Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error."

  I bought a wifi USB adapter and it is a driver windows 7 available on the manufacturer's website. RALink

  http://eng.ralinktech.com.tw/support.php?s=1

  My computer is a HP P6110f desktop computer. It came with a Vista 64 OS which I've upgraded to a Windows 7 Home Premium.

  I tried to install all kinds of different ways but were not able to make it work.

  Disconnect all other devices driver/software uninstalled and reinstalled all plugging adapter in each computer startup I tried port USB with adapter connected and also connect after windows load discharged from all applications running, including firewall and anti-virus

  Can you please help me solve this problem? I consider myself quite computer but I'm completely puzzled here.

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7
  Windows 7 discussion groups

  They may be able to help in obtaining the wifi USB adapter to work.

  8007001F (a device attached to the system is not functioning) TaurArian [MVP] 2005-2010-implementation to date of Services

• I get this error message: Code 80070663

  I get this error message: Code 80070663 and it seems that there is no solution for it to what tells me the support. Please give me a process step by step in order to fix this problem please!

  Step by step this path below that can help you to correct the error.

  Click on the "Start" button, type "Windows Explorer" in the search box.
  Click on the "Windows Explorer" in the "Programs" menu
  Navigate to the path "c:/users/Allusers/Microsoft/Office/data", find "opa12.dat" file and rename it to "opa12old.dat".
  When you restart Windows Office and open a file, it prompts you to turn on the Windows desktop, then activate it online.
  Reinstall the updates from the Windows desktop, and then restart the computer.

  This solution of error on this site:
   http://www.regmender.com/how-to-fix-Windows-Update-error-80070663.html
  Hope it can help you. Good luck.

• Error 0x8007054F codes & 0x66A

  Hi there, I tried to install 2 x unsuccessful security updates. They are 2393802 KN (error 0x8007054F code) and Ko 974417 (error 0x66A code). I tried Fix - it and the analysis of malware and security running, but still updates will not be installed. Anyone know how I could fix this?

  Hello PaulAskill,

  Thanks for your post.  Please see this thread for a possible resolution on this issue.

  See you soon

• Windows updates: error 80072EFE Code. Cannot find the error code.

  Anyone has any info on the error 80072EFE code.  I can't get windows updates...

  Successes have been reported using TDSSKiller.exe which will remove the malware, which belongs to the 'family' of Rootkit.Win32.TDSS, of your machine.
  Here is the link:
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  My previous answer to the same question:
  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/5fa45657-9cf1-45E4-BEAB-6a97e7644c55

  Here are a few other previous answers from other users:
  http://social.technet.Microsoft.com/forums/en/itprovistaie/thread/0ce7c1e6-7EF2-48e1-B7C9-c8f1e97c71d5

  Here is a tutorial from Microsoft Support
  http://support.Microsoft.com/kb/836941 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.