Error 0x8007054F codes & 0x66A
Hi there, I tried to install 2 x unsuccessful security updates. They are 2393802 KN (error 0x8007054F code) and Ko 974417 (error 0x66A code). I tried Fix - it and the analysis of malware and security running, but still updates will not be installed. Anyone know how I could fix this?
Hello PaulAskill,
Thanks for your post. Please see this thread for a possible resolution on this issue.
See you soon
Tags: Windows
Similar Questions
-
Error 0x8007054F code: could not install SP3 for Windows XP
original title: error 0x8007054F code: could not install SP3 for Windows XP because of the Filec:\windows\system32\drivers\acpi.sys being open or being used by another application. "Internal error."
I tried to install Windows Service Pack 3 for Internet Explorer8. When you try to install this "priority" update, it begins the installation process, and then returns could not install Windows Service Pack 3 due c:\windows\system32\drivers\acpi.sys file is open or in use by another application. Internal error 0x8007054F. The only thing I have running in this case is the Internet (where I go to get the update) and the windows installation progress. What should I do to get past this problem? Please help me...
Your loyal customer
Hello
To work on the issue, refer these methods
Method 1:
Read the following article.You cannot install some programs or updates
http://support.Microsoft.com/kb/822798
Method 2:
Error messages when you try to install Windows XP Service Pack 3: "Service Pack 3 installation did not complete" and "an internal error has occurred."
http://support.Microsoft.com/kb/949384
Registry warning:
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ )See also,Steps to take before you install Windows XP Service Pack 3
http://support.Microsoft.com/kb/950717How to troubleshoot an installation fails on Windows XP Service Pack 3
http://support.Microsoft.com/kb/950718Hope the information is useful. -
Error 0x8007054F code when you try to install update KB2633171
I'm having the same problem with the KB2633171 update, it is downloaded on my computer, but it won't install. Still getting an error 0x8007054F code and he keeps trying to install the update in my computer about every 10 minutes, with the same error code. I tried closing all other programs down, cleaned up in the browser history files, ran the chkdsk and everything clean, also defragment the hard drive. Then ran my antivirus scans nothing appears. My computer is still having the same problem, also another thing I've noticed since this problem updated my computer is starts to run a bit slower during starts and attempts to access the internet. What should try do next?
I've noticed since this problem updated my computer starts to run a bit slower during starts and trying to access the internet. What should try do next?
Suggest that you first spread malware as the cause of the problem by following these steps:
Download, install, update, and run analyses both of these tools free anti-malware:
MalwareBytes anti-malware (MBAM)
http://www.Malwarebytes.org/products/malwarebytes_free>
SUPERAntiSpyware (SAS)
http://SUPERAntiSpyware.com/superantispywarefreevspro.html>
UTC/GMT is 16:31 on Friday, December 23, 2011
-
KB2676562 update fails with error 0X8007054F code
I am constantly told to install this update, it fails every time.
Hello
Follow these steps and check if they help.
Step 1:
Put your computer in a clean boot State, then install the update.
Note: Restart your computer as usual by following the steps described in the article.
Step 2:
Follow the steps in this article and check if that helps.
-
Windows KB2393802 update fails with error 0X8007054F code
OS is Win XP SP3
Looks like it was the first update of the usual pack that came out this week. It doesn't have the rest Pack updates succeeded.
FWIT previous update was installed on 12/01/2011 KB890830.
I rebooted, still failed. I tried to run the update directly from the windows update web page, same result. A Google search suggests that I'm not the only one to question.
If you are absent the Shell for Windows (KB2483187) and updates to the kernel (KB2393802) and yet the previous kernel update (KB2436673) and the two latest updates of the kernel (KB981852 & KB2479628) driver installed. I assume that the previous update of Windows Shell (KB2286198) is installed.
This suggests that you may have picked up an infection of W32/Alureon-varying rootkit since mid-December.
1. Let's see what could detect & remove Kaspersky TDSSKiller:
How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)
http://support.Kaspersky.com/viruses/solutions?QID=2082806842. If such an infection was detected and removed: open Internet Explore (only) tohttp://support.microsoft.com/kb/971058 & run DEFAULT inside difficulty modes and AGGRESSIVE; Restart & test. [1]
~~~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Why the NET Framework 1.1 SP1 install fails everytime I try? Error code: 0x66A. 867460 reference
It downloads, but the installation fails.
I have latest updates installed.
See: http://social.answers.microsoft.com/Forums/en/vistawu/thread/0ffda4f1-4a9f-426a-94f4-4d6bd92ec2e2
66A: he cannot find the files of origin or something of memory, setting is corrupted.
You can simply fix Framework 1.1
TaurArian [MVP] 2005-2011 - Update Services
-
C410a all in OnePrinter: what is error Situation Code 12522209
The charge of computer software was successful. When you set up the printer, error Situation Code 12522209 came and still can not print or use other functions of the printer. What does the acronym for the Code number.
Winfro
Hey @winfro,
Welcome to the Forums of HP Support!
I see that you see an error code associated with your Photosmart Premium Fax e-all-in-one printer. I can help you with that, but I'll need some information first. Please let me know where you see this code. Once I know that I will be better able to help you.
-
RALink - network - 802.11n/b/g Wireless LAN USB 2.0 Mini adapter 379ko
Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error."
I bought a wifi USB adapter and it is a driver windows 7 available on the manufacturer's website. RALink
http://eng.ralinktech.com.tw/support.php?s=1
My computer is a HP P6110f desktop computer. It came with a Vista 64 OS which I've upgraded to a Windows 7 Home Premium.
I tried to install all kinds of different ways but were not able to make it work.
Disconnect all other devices driver/software uninstalled and reinstalled all plugging adapter in each computer startup I tried port USB with adapter connected and also connect after windows load discharged from all applications running, including firewall and anti-virus
Can you please help me solve this problem? I consider myself quite computer but I'm completely puzzled here.
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Windows 7 discussion groupsThey may be able to help in obtaining the wifi USB adapter to work.
8007001F (a device attached to the system is not functioning) TaurArian [MVP] 2005-2010-implementation to date of Services
-
KB978601 and kb979309 update failed: error 800b0100 code
Windows Update says that I need these two updates of security, but it cannot install them. I can install all other updates but these two. It just says 'update failed' and gives me the error 800b0100 code. Anyone know if it is a general problem or if it's just my computer?
Windows Update says that I need these two updates of security, but it cannot install them. I can install all other updates but these two. It just says 'update failed' and gives me the error 800b0100 code. Anyone know if it is a general problem or if it's just my computer?
A general problem? N ° If it is Vista or Windows 7, see: Windows Update, error 800b0100
If the system is running Windows 2000, Windows XP, or Windows Server 2003, see: error message when you try to use Microsoft Update or Windows Update Web sites to install updates: '0x800B0100'
You may find that you can download save manually, and then install the updatesKB978601 KB979309 first, then then and who can fix the error. You can download the two updates from the Microsoft Download Center. Don't forget to download the update for specific version of Windows and the architecture that the system is running. EX: If it is Vista 32 bit, then take the 32-bit version of Vista. If it's Windows 7, 64-bit, then download and save the 64-bit version.
MowGreen Services update - consumer safety
-
I get this error message: Code 80070663
I get this error message: Code 80070663 and it seems that there is no solution for it to what tells me the support. Please give me a process step by step in order to fix this problem please!
Step by step this path below that can help you to correct the error.
Click on the "Start" button, type "Windows Explorer" in the search box.
Click on the "Windows Explorer" in the "Programs" menu
Navigate to the path "c:/users/Allusers/Microsoft/Office/data", find "opa12.dat" file and rename it to "opa12old.dat".
When you restart Windows Office and open a file, it prompts you to turn on the Windows desktop, then activate it online.
Reinstall the updates from the Windows desktop, and then restart the computer.This solution of error on this site:
http://www.regmender.com/how-to-fix-Windows-Update-error-80070663.html
Hope it can help you. Good luck. -
Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code
Take a look at this article as it addresses this error code. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
error 80072EFE code when you try to update and nod32 messages popping up saying that it blocks web sites.
Hi hermenegildogildoshine,
1. did you of recent changes on the computer?
2 do you have installed on the computer ESET security software?
The error 80072EFE occur perhaps caused by one of the following problems:
(a) applications or processes that interfere with Internet communications
(b) problems of resource on your computer
(c) a strong activity on the Internet
(d) recoverable database errors
See the below Microsoft article and try the steps mentioned, check if it works.
You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/836941
The error of nod32, you would receive if ESET security software blocks Web sites.
I suggest that you check in the ESET security software to unblock websites.
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
This is the first time the following: failed: 1 update or the errors found Code 80070643. I followed through the Fix code he doctor. This morning the automatic update 4/16 showed failure: update for Microsoft Office PowerPoint 2007 (KB 24664594)
Hi William,.
First try the following article: http://support.microsoft.com/kb/971058.
If this does not work, try this link: http://support.microsoft.com/kb/923100.
While I'm not quite certain that the first will succeed, the second is a common and often recommended solution that has helped a lot with this error code.
I hope this helps.
Good luck!
-
Windows update error. Code 80244018 on Windows server 2008 64 bit
When I perform a windows update on my windows server 2008 64-bit, I get this error message:
Code 80244018 Windows Update encountered an unknown error.
I use as antivirus Symantec Endpoint Protection version 11.0.In my control panel configuration, automatic updates is set to automatic and Background Intelligent Transfer Service is also set to automatic.
HelloI suggest you send your query on the link below:
http://social.technet.Microsoft.com/forums/en-us/IECs/threads
-
Windows updates: error 80072EFE Code. Cannot find the error code.
Anyone has any info on the error 80072EFE code. I can't get windows updates...
Successes have been reported using TDSSKiller.exe which will remove the malware, which belongs to the 'family' of Rootkit.Win32.TDSS, of your machine.
Here is the link:
http://support.Kaspersky.com/viruses/solutions?QID=208280684My previous answer to the same question:
http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/5fa45657-9cf1-45E4-BEAB-6a97e7644c55Here are a few other previous answers from other users:
http://social.technet.Microsoft.com/forums/en/itprovistaie/thread/0ce7c1e6-7EF2-48e1-B7C9-c8f1e97c71d5Here is a tutorial from Microsoft Support
http://support.Microsoft.com/kb/836941 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
Maybe you are looking for
-
I did my browser Bing and it was working fine until today. When I open Firefox I get a message: Ref, then a long string of characters. I click on the Home icon and string changes. After doing this several times, I get the Bing search page. I don't ge
-
cancel the repetitive nature Eliminator
I checked the pop up box to turn on the eliminator repetitive nature by mistake. How to get back to where I was before? My arrows do not move my cursor to document
-
How to pass the .obj files to the linker in a listing file?
Our project has reached a stage when we generate as many .obj files only by passing them to the linker is upper control limit in Windows, and part of it is chopped. Accordingly, the linker does not receive all the names file entry and defective. Fort
-
Out of the blue my Storm will stop current synchronization via the address book. A window appears with the following error code: 0x8004fd28 check the Documentation. I've been syncing with a laptop with Windows 7 Professional without difficulty for th
-
Setup is NOT let me install anything
Original title; My windows 'Installer '. My windows "Installer is NOT letting me install anything, how to reactivate it or fix this part?