Please help, data queue on the remote server

Similar Questions

• Data queue on the remote server to Local computer

  Hi Experts,
  
  Please help, I need data spool on a remote server using putty (sqlplus) to a local computer. There are credentials that I give before accessing remote databases and I am able to do... I tired with the sub query but the spool file (csv or txt) is not able to create on the local computer.
  
  set colsep,
  set pagesize 120
  Set trimspool on
  headsep off Set
  set linesize 1000
  Set numw
  
  coil D:\test\myfile.csv
  
  Select table_name, tablespace_name of all_tables;
  
  spool off
  
  PS: I'm new to this technology, please help
  
  Kind regards
  Bosch

  Hello

  You will need SQL * more on the local computer instead of ssh on the server.
  The comand coil reels to the file system where SQL * more is running. If you first of PuTTY (ssh) on the server, then your SQL * more is running on the server, not on the local computer.

• Help! Save on the remote server has broken links to images

  Well, I (now) know it was a stupid thing to do - but surely there must be an easy way to fix... !?

  I usually have to 'PUT' html on the remote server files, once they have been registered locally. But I keep frustrated all dependency files you download, then... I "discovered" the 'SAVE to REMOTE SERVER' command, and this allows to save my file html directly to the server. I was asked if I wanted to update all the links - and I clicked on YES (doh!)

  Now all my images and links are broken.

  I know it's just a single page-, but it contains a number of links and images. Also, this page uses a template and the images/links from the model content in a file are also broken. (The actual model file and all the other pages of the site are okay)

  'Undo' didn't work

  Does anyone know a quick way to solve this problem?

  I'm using Macromedia Dreamweaver MX 2004

  MANY thanks in advance,

  Rich

  Go in Edition > Preferences > Site >

  Under dependent files, you must have two checkmarks.

  In this way, that you will be asked each time to say YES or NO to the dependent files.

  I hope this helps.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com

• Windows Media Center - not the initial download put in place data for guide "unable to connect to the remote server.

  Hello

  Looking for help on this one...

  I have a new install of windows 7 pro running, and I was not able to get the guide to download Windows Media Center.   I am up-to-date with all the updates and SP1 version running.   My video card drivers are also updated.

  I use HDHOMERUN PRIME equipment with cablecard and who receives a TV signal very well and I am able to view it in WMC.    I use Verizon FIOS and my zip code is 07452.    Before this computer, I ran the cablecard even with a ceton infinitv and had no problem Guide at all.

  It's just that I can't download the guide data.  Its just totally blank.   I receive the channels and view them, but there is NO data.      Whenever I run the TV setup the same question comes up.  Cannot download the initial configuration data due to the error of previous download.   As far as I know, there is NO error message when Windows installed... actually... I reinstalled windows completely and this has not solved the problem.    I tried to manually download the guide which did not help.   It... nothing happened when I turned 'on' and 'off' WMC in Control Panel to reinstall.  I even tried explore the ehome folder and remove the file db... but nothing is helping.

  I can't find a file mcupdate.exe light on my system - don't know if this is relevant.   When I looked in the event viewer here are some of the error messages that I see.

  Impossible to extract the EpgLineups (error: unable to connect to the remote server)
  Impossible to extract the MCEClientUX (error: unable to connect to the remote server)

  I'm starting to think it's a matter of windows.   Anyone have any ideas?

  Mark

  E-mail address is removed from the privacy *.

  On Tuesday, September 23, 2014 00:32:35 + 0000, Mark_Sap_70 wrote:
   
  > I'm starting to think it's a matter of windows.   Anyone have any ideas?
   
  See this thread
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/is-the-Media-Center-Guide-download-service-down/f0a5ae10-00ea-4635-9177-12074fa7ee81?msgId=87f3f3b5-A485-4c41-8f35-43a4e2a75d7c
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• Problem with opening of library saved on the remote server. Can anyone advice please?

  I saved the library on the remote server. When I try to open it, I get the following message:

  "Libraries cannot be saved to this location. . The format of the selected hard drive or network volume is not supported. Select another location. »

  Can anyone help please?

  I don't think I have made it clear that the problem is with iMovie on iMac ElCapitan 10.11.3 running. Thank you

• How to create a file of data to the remote server...

  I need to create the data to the remote server file...

  When I tried to create using the command

  create tablespace XXXC_DATA Datafile

  ' \\1XX. XX. X.XXX\TestSVR_Share\CCC\oracle\Datafiles\CCC_DATA. DBF'

  size 10 m

  autoextend on

  next 10 m

  MaxSize unlimited;

  

  I checked the local policies.

  (I am an admin user and I added 1) access this computer from the network 2) Act as part of operating system and update of local policies

  It did not work.

  so I've mapped the shared location and run ogical below command

  create tablespace XXXC_DATA Datafile

  ' Z:\TestSVR_Share\CCC\oracle\Datafiles\CCC_DATA. DBF'

  size 10 m

  autoextend on

  next 10 m

  MaxSize unlimited;

  

  Can anyone help on this.

  It does not matter if * you * have access to this shared directory. This is important if the user used to run Oracle.

  When you access the Services application in Windows (I assume you are the DB on Windows), double-click the Oracle service for the database in question and go to the tab "Log On", it is * that * the user who must have access to the directory is shared. If you have "Local System" set as a user, you will need to change this.

• MySQL database does not work on the remote server help!

  Hello

  I'm kinda a noob in PHP/MySQL and I can't get my MySQL database to work on my remote server (it works on my local server).

  On the spot, I have:

  Connection name: local

  MySQL server: localhost

  User name: root

  Password: root

  Database: wbgt

  From a distance, I have:

  Created a database to help:

  username: wbgt (although it displays it as "web100-wbgt")

  password: root

  I also imported the MySQL database on the remote server.

  When I try to access any page that uses the MySQL database, it comes in white!

  Any ideas?

  Thanks in advance for your help

  Eddie

  Thank you! I got confused that it was not connect to the remote server.

  If someone else is in a similar situation as I was.

  I use heartinternet.co.uk

  1. export your local MySQL database
  2. create a MySQL database on your remote web hosting provider
  3. go to manage (or something similar) and import the MySQL database on your web hosting provider remotely
  4. in dreamweaver go to database data, +, MySQL connection Panel (or change your original database)
  5. Connection name - what you want
  6. MySQL - Localhost Server
  7. User name - whatever your remote site named the database in my case, I entered admin, but the user name is admin-web100-8
  8. Password - password for your remote database
  9. Database - go in manage your databases click on database and on the left side you should see the name of your database. in my case it was web100-admin-8 new (I couldn't connect on the ddatabase distance so I had to enter manually)
  10. Click fact put and it should work!

• BlackBerry Z3, I lost all my data on my SD storage card, please help me to retrieve the data.

  Dear Sir.

  I lost all my data on my SD storage card, please help me to retrieve the data. I have a Z3, just bought only a week before, I removed the card with the phone off and then give the card again and noticed that I lost all the data. Please help

  Try restarting your phone. Sometimes it shows data that brought them "disappeared". To do this, hold down your power button for about 15 seconds, until you see BlackBerry on your screen. Do not release the button until you see that without taking account of any other thing you see before that.

  Try this and post back with your results.

• "Error 638: the remote server is unresponsive in a timely way", when I try to connect to the Internet.

  Title: "error 638: the remote server is unresponsive in a timely way." What in the world is that supposed to mean?

  I have known the above error (for 2 weeks now) whenever I try to connect to the internet via modem huawei e160. I have not installed any programs recently. I physically contacted my ISP and according to them, the modem works properly and that the problem is with my computer. A professional COMPUTER friend told me that he once experienced a similar problem and the solution in the end was re - install the operating system. I did as much with PC to get back that far. Someone please help coz it is a nightmare.

  I had the same problem. And just uncheck the 'Operator operator-assisted' Option on the "Advanced" tab in the window 'Manage settings of the map' did the job. Try it. You will surely succeed.

• "The remote server returned an error: (502) Bad Gateway" while matching Protected Site VC and recovery Site VC in VMware SRM

  Hi all

  I am trying to Setup VMware SRM 4.1 groups. I had configured hitachi usp vm storage based array replication in both sites.

  Now when I try to pair the two sites vCenter, I get an error at the end of the phase of matching as message "the remote server returned an error: (502) Bad Gateway ' on the protected site. But surprisingly, I am able to match both the vCenters on the recovering site.

  Please help me to get the problem.

  Thanks in advance,

  Sanjeev

  Run telnet server vCenter/SRM protected site to the recovering site server vCenter/SRM:

  Telnet IP_ADDRESS 80

  Telnet IP_ADDRESS 443

  You succeed?

• replaces the former site files with the files edited on the remote server?

  How we replaced the redesign of my website with the old. The revised files are in a new folder on my desktop with a name other than the old files. For the server section to manage sites I click New to enter the same information as the info on my existing site or should I click on edit on the original server info. All information is the same for the location of the remote server, password, user name. The only thing different is the name of the folder where the new files are stored on my computer. Should I move the new files to the folder containing the old files. Help, please. More I read the more confused I became. Thank you. Karen

  It does not matter what drive name or folder you used on your computer.

  What is important is that the structure of the Local site corresponds with that on your remote server.

  Access the Site > Manage Sites > changing the definition of the old site > tell DW where to find the new Site Local folder.  See screenshot.

  

  Nancy O.

• Install Adobe Application Manager: "the remote server does not appropriately."

  I am running Windows 7 and have signed today for the trial of the creative cloud.  I am trying to download my first application (InDesign).  When you try to install Adobe Application Manager I download a 1866 KB file, then when I try to run it I get this error message (again and again, throughout the day): "the remote server does not properly.  Please try after a few minutes. »

  The only other things I can think of that may be relevant are 1) I have a few other licensed Adobe products installed on my drive (Photoshop, Illustrator, and Acrobat). (2) I have a few programs running, such as Spotify background; and (3) I have tried this for a work computer and I wonder if the network firewall or my permissions to download which is streaked with this place.

  Thanks for any help you can give.

  Nate_unhappycloudman this error has actually been resolved for countless people once their computer or the network is correctly configured.  We'll find a good starting point for possible causes on a computer at individual sign in or activation errors. CS6, CS5.5, Perpetual CS6 subscriptions - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html.

  If your network is managed, please contact us and work with your I.T. Department as stated earlier in this thread.

• Channel disconnected error with the remote server

  I created the Mobile Flex and PHP project that works very well with a local server (MAMP on Mac). Basically, it reads the data to get MySQL and displays the map Google. Now, I'm moving from a local server to a remote server.

  But when I run my application on emulater, I get the error "channel disconnected - disconnected prior to receipt of the acknowledgement of receipt."

  I Googled what this error is and found a web site that described on this error. According to the web site, the error is probably due to a PHP syntax error and use Network Monitor to debug it.

  However, the problem is that after I activated the network monitor and run my application on the emulator, nothing appears on the monitor network. My first question is if I should use Network Monitor to debug this error of channel disconnectef? The second question is negative, how can I debug this error? Any help would be appreciated.

  I finally understood what I was doing wrong. I followed the insturction of davidflexto http://forums.adobe.com/thread/875709 and didn't I have to set host = 'localhost:8889' in my php that connects to my remote mysql server. It's delicate sicen is remote server, you set host = your domain name, but that's not true. Like davidflex said you need to set host = ' local: 8889 "since your gateway.php is also running on the remote server.

  I fell for several weeks and hope that someone else get stuck like I did it for several weeks.

• Test against the remote server

  Y at - it no way to automate or simplify the advancement of confirming a file is good on the testing server to upload to the remote server (production)? AFAICT, it seems that I have to manually upload the files to the production server if I have a defined test server. (I use a dynamic content; I know about the .tmp files, but see more to why this isn't what I want). From what I see, the better I can do is the server of your choice via the drop-down site button and use the synchronization feature.

  Maybe the distance/test config is not what I should do, but what for me has been not only have a place to try things, but also use the test server as a production server temporary on these occasions that the production server must be taken offline. (If I have the right SVN, this isn't a viable option either, besides, I have the server backed up using 3 different applications). So, I want my test server files to be a copy of my remote server, including the latest files.

  Suggestions?

  The test server is usually just to test and you should never really put a test server to a live server.  DW can manage several remote servers, but as far as I know, even with CS5.5, you can upload to a remote server at a time.  As the servers that you are talking about are in the same data center, it should be possible to configure a second server for redundancy so that if one blocks the other picks up the load.  However, I would say that this is not the appropriate forum to get help on configuring redundancy in a datacenter.  If your two servers are in 2 data centers different it's a whole other discussion.  I would like, there was more that I knew about the subject, but I'm really not familiar with the installation of the network of websites of the scale.

• FTP adapter: Not picking not the file on the remote server

  Hello
  
  I use the FTP adapter to read the file from the remote server and file ra.xml - oc4j configured with good host, port, username and password.
  
  Once I have deployed my process, no instance of this process is created and remote directory entry file is not picked up.
  
  Please help on this issue. Thanks in advance.

  Just checking that you can send via ftp manually from the BPEL server.

  Looks like you can use the ra.xml - oc4j wrong file.

  Also in your BPEL project, take a look on the link partner FTP and see the JNDI location, it will look something like eis/Ftp/sample.

  This may be what you want to rename, generally good naming practices puts the server, for example Ftp/ist/FtpAdapter

  To make sure that you have configured the file ra.xml - correct oc4j we can check through the Manager of the company, even though Marc has specified the correct location.

  EM-> oc4j_soa-> Applications-> Drop down choice list autonomous resource adapters-> FtpAdapter-> connection Pools

  Select the JNDI name, you indicated in your BPEL process, if there is no create a.

  Create connections as needed.

  Also a hint is to start with the base directory, for example when you connect by ftp manually, it will be where you load the files. In your configuration / (oc4j - RA.Xml) is the place of departure and / is the physical or logical path. Download this work so that you know that you have the right connection. Then start working on the location of the directory.

  see you soon
  James