Help! Save on the remote server has broken links to images

Similar Questions

• file on the remote server has changed

  Downloading changes daily I often receive a warning popup that

  upploadare has changed on the server remote (date) since your last get or put operation. Put the file can overwrite changes in the file. You want to place the file anyway?

  

  In Dreamweaver CS5, I always click on the Yes to all button. In Dreamweaver CC dialog box appears, but is hidden behind the active window in Dreamweaver. There is no way to divert attention from the pop-up window. The solution is to make the active little Dreamweaver window, exposing so the center of the desktop, before put the files.

  Is it just me or everyone knows this problem?

  I use Dreamweaver 2014.1.1 Release, Build 6981 CC.

  Thank you.

  John

  This problem is fixed in the new version of Dreamweaver Creative Cloud 2015. Adobe would like to thank you!

• "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

  Hello

  I received the following error message

  "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

  This happens when I try to log on my remote on the icon access log, I put on my computer at home so that I can get to work if I need to.  He worked for a few months after I bought my new laptop and software, but now suddenly it doesn't.  I talked to my guy TI in the work and they seem to think it's a common problem with "Vista Home Premium", I can do to change it so that I can use the remote access icon?

  Thanks in advance

  Hello
   
  Licensing protocol handles the communication of information on licenses between your computer and the remote computer. If there is an error in the licensing protocol, your computer may not be connected to the remote computer.
   
  To resolve this problem, restart the computer and try connecting to the remote computer. If you continue to receive this error message, contact the server administrator.
   
  This also occurs if one of the registry entries is corrupt. Try the following steps to resolve this problem.
  1. Click Start, type regedit and press to enter.
  2. on the window of the registry editor, navigate to Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\MSLicensing
  3. right click MSLicensing, click on export and provide a file name for example RemoteKeyBackup and click on save to the desktop.
  4. right click on the HardwareID key and store under MSLicensing folder and click on delete.
  5 restart the computer for changes to take effect. Restarting the computer will create new keys.
   
  NOTE: If the problem persists, then you can take backup of the MSLicensing registry key and to load it on the computer of the problem, this will fix the problem.
   
  Visit this link for more information:
  http://TechNet.Microsoft.com/en-us/library/cc756826 (WS.10) .aspx
   
  Important: Incorrectly editing the registry can cause serious problems on the computer.
  Back up the registry: http://windows.microsoft.com/en-us/windows7/Back-up-the-registry
   
  Try the steps and check the result.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Please help, data queue on the remote server

  Hello Experts,
  
  Kindly help, to learn how to roll up the data from the remote server. I need a detailed procedure to make settings on my local machine to connect to remote Oracle using SQL Server * MORE.
  
  I installed on my local machine which is 32-bit Oracle 11 g Release 2:+.
  
  SQL * more: Production of release 11.2.0.1.0 Fri Feb 8 12:02:30 2013
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  Enter the user name: SYSTEM
  Enter the password:
  
  Connected to:
  Oracle Database 11g Release 11.2.0.1.0 - Production
  
  SQL >
  
  and on a remote server below is the version installed.
  
  Log in as: B_DB1user
  [email protected] password:
  Last login: Sat Feb 7 18:19:35 2013 10.10.167.8
  [B_DB1user@bamdb001 ~] $ sqlplus
  
  SQL * more: version 11.1.0.7.0 - Production Fri Feb 8 12:06:35 2013
  
  Copyright (c) 1982, 2008, Oracle. All rights reserved.
  
  Enter the user name: B_DB1user
  Enter the password:
  
  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
  With the partitioning, Real Application Clusters, OLAP, data mining
  and Real Application Testing options
  
  SQL >
  
  ----------------------------------------------------------------------------------------------------------------------------
  That's what I have in tnsnames.ora
  
  tnsnames.ora # Network Configuration file: E:\app\managerproj3\product\11.2.0\dbhome_5\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  LISTENER_ORCL =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  
  
  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl.10.167.8)
  )
  )
  
  ---------------------------------------------------------------------------------------------------------------------------------
  That's what I have in listener.ora
  
  
  listener.ora # Network Configuration file: E:\app\managerproj3\product\11.2.0\dbhome_5\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  AUDITEUR1 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.10.167.8)(PORT = 1521))
  )
  )
  
  ADR_BASE_LISTENER1 = E:\app\managerproj3
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  )
  )
  
  ADR_BASE_LISTENER = E:\app\managerproj3
  
  ------------------------------------------------------------------------------------------------------------------------------------------
  
  
  Database server: ORACLE
  HOSTNAME: BAMDB001
  IP address: 156.1.3.4
  
  
  and here is the script I tried data spool in the local computer using SQL * MORE
  
  set colsep,
  set pagesize 120
  Set trimspool on
  headsep off Set
  set linesize 1000
  
  coil D:\test\myfile.csv
  
  Select table_name, tablespace_name of all_tables;
  
  spool off
  
  It is effective on the local machine... Please help me to get the data from the remote server to the local computer?
  
  Kindly let me know if you need anything whatsoever.
  
  Thanks in advance
  
  Kind regards
  Bosch

  Is not more or less the same question you asked in {message identifier: = 10835497}?

  You must have a user to the remote database and an entry for the remote database in your tnsnames.ora file

  If you have just to coil of database of remote and local database didn't need to be involved:
  Edit your tnsnames.ora and add an entry with the remotedb, the information and you need to have the following information:

  Ip address or the name of the server (BAMDB001?)
  Name of the service (?)
  Port configured for this database. (??)

  Also, you must be sure that the connectivity of your local computer to a remote server is granted (without firewall block).
  Only when you have this information, you can connect to the remote database from your laptop.

  From the Unix server where you connect to the database, you can get the information to be inserted in your local tnsnames.ora by typing:

  tnsping dbname
  

  Of course, you need to replace dbname with the name of your database.
  Another way is to check the remote tnsnames.ora when logged in Unix:

  cat $ORACLE_HOME\network\admin\tnsnames.ora
  

  and check the configuration it.

  Kind regards.
  Al

• MySQL database does not work on the remote server help!

  Hello

  I'm kinda a noob in PHP/MySQL and I can't get my MySQL database to work on my remote server (it works on my local server).

  On the spot, I have:

  Connection name: local

  MySQL server: localhost

  User name: root

  Password: root

  Database: wbgt

  From a distance, I have:

  Created a database to help:

  username: wbgt (although it displays it as "web100-wbgt")

  password: root

  I also imported the MySQL database on the remote server.

  When I try to access any page that uses the MySQL database, it comes in white!

  Any ideas?

  Thanks in advance for your help

  Eddie

  Thank you! I got confused that it was not connect to the remote server.

  If someone else is in a similar situation as I was.

  I use heartinternet.co.uk

  1. export your local MySQL database
  2. create a MySQL database on your remote web hosting provider
  3. go to manage (or something similar) and import the MySQL database on your web hosting provider remotely
  4. in dreamweaver go to database data, +, MySQL connection Panel (or change your original database)
  5. Connection name - what you want
  6. MySQL - Localhost Server
  7. User name - whatever your remote site named the database in my case, I entered admin, but the user name is admin-web100-8
  8. Password - password for your remote database
  9. Database - go in manage your databases click on database and on the left side you should see the name of your database. in my case it was web100-admin-8 new (I couldn't connect on the ddatabase distance so I had to enter manually)
  10. Click fact put and it should work!

• ColdFusion CFFTP copy of the file from the remote server and save to a local folder with the same file name

  Is it possible to copy a file from a remote ftp server to a local folder, while retaining the original file name? Please note: the file name on the remote server is not always the same.

  This article from Adobe might be useful.  (I was tempted to use LMGTFY; but I do not have).

  V/r,

  ^_^

• The connection to the remote host has been lost.

  Seriously, almost every time I save a file and try to download it I get this error:

  The connection to the remote host has been lost. Click Refresh to reconnect.

  So I have to start again to download the file again... but no, I get this error again... until about 7 times then it will finally through. After that happening by once I have on a window of 2 minutes where I can download files without errors... then the cycle continues.

  This is driving me CRAZY! It happened for about 2 weeks. I have not recently changed all the server info. I used to download files on the same server from dreamweaver all the time with ease. My partner with the same configuration works always with ease. So why am I having so much trouble?

  I often have to troubleshoot PHP where I upload to the server to run it to see if it works, and I could have several times to download a file in the few minutes that becomes incredibly tedious task with this ongoing issue.

  Someone please help.

  Thank you!

  P.S. I'm using CS3.

  Ah ha! I finally got to work properly!

  Your site-> Site-> Remote Info Manager, try to check the passive FTP box and see if it works.

• Remote server has gone

  By chance, I clicked on "Unpin this program from the taskbar" on the line background funds therefore, now I can't see the icon for the remote server access. Please notify. Thank you!

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that the remote server icon has disappeared from the taskbar.

  I would like to know some information.

  1. Have you checked is it installed in the programs and features?

  I suggest you try the steps.

  1. Click on start.

  2. Click on programs.

  3. Program should be in there if you have accidentally uninstalled.

  4. Click right on the program.

  5. Click on pin to taskbar.

  If the program is not listed then try to check the program in programs and features.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Windows Media Center - not the initial download put in place data for guide "unable to connect to the remote server.

  Hello

  Looking for help on this one...

  I have a new install of windows 7 pro running, and I was not able to get the guide to download Windows Media Center.   I am up-to-date with all the updates and SP1 version running.   My video card drivers are also updated.

  I use HDHOMERUN PRIME equipment with cablecard and who receives a TV signal very well and I am able to view it in WMC.    I use Verizon FIOS and my zip code is 07452.    Before this computer, I ran the cablecard even with a ceton infinitv and had no problem Guide at all.

  It's just that I can't download the guide data.  Its just totally blank.   I receive the channels and view them, but there is NO data.      Whenever I run the TV setup the same question comes up.  Cannot download the initial configuration data due to the error of previous download.   As far as I know, there is NO error message when Windows installed... actually... I reinstalled windows completely and this has not solved the problem.    I tried to manually download the guide which did not help.   It... nothing happened when I turned 'on' and 'off' WMC in Control Panel to reinstall.  I even tried explore the ehome folder and remove the file db... but nothing is helping.

  I can't find a file mcupdate.exe light on my system - don't know if this is relevant.   When I looked in the event viewer here are some of the error messages that I see.

  Impossible to extract the EpgLineups (error: unable to connect to the remote server)
  Impossible to extract the MCEClientUX (error: unable to connect to the remote server)

  I'm starting to think it's a matter of windows.   Anyone have any ideas?

  Mark

  E-mail address is removed from the privacy *.

  On Tuesday, September 23, 2014 00:32:35 + 0000, Mark_Sap_70 wrote:
   
  > I'm starting to think it's a matter of windows.   Anyone have any ideas?
   
  See this thread
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/is-the-Media-Center-Guide-download-service-down/f0a5ae10-00ea-4635-9177-12074fa7ee81?msgId=87f3f3b5-A485-4c41-8f35-43a4e2a75d7c
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• Select the remote server to download files.

  With the help of CS5.5 I am unable to put files on my test server, except if the remote server is selected. He said: "before using this feature, you must set up a remote server. You want to book one now? ".

  If I check the remote server, I am able to upload files to the test server, also download the remote server that is BAD, I'm just testing and redesigning the site.

  I found another thread saying to remove the site, I did; Nothing helps.

  If I do not select a remote server I'm unable to download and to remodel the site.

  How do you have on this?

  Managed to fix it I made my server under servers model > advanced > server model has been configured for PHP MySQL.

• SRM 5.5 - the remote server returned an error: (503) server unavailable, could not create SSL/TLS secure channel

  Design:

  2 vCenter VMs version 5.5 on new W2k12. x. related and the same use facilities key SSO (default installation)

  2 x fresh install of the SRM VMs version 5.5

  20 + hosts vSphere 5.5 with DR/HA configured and working. Two dvSwitches (one per site) configured with the groups of port / VLAN work

  Question:

  Installation goes well until I needed to activate the Plugin SRM in vCenter.  Plugin called "Plug-ins available" and I click on the link 'download and install '.

  I had two separate fouls on both servers vCenter, both with same errors if it is compatible.

  Errors:

  (attached file viclient-3 - 000.log)

  The request has been aborted: could not create SSL/TLS secure channel.

  (attached file viclient-3 - 000.log)

  The remote server returned an error: (503) server unavailable

  I guess that the two are linked and probably something with SSO.  Post installation on each server vCenter vCenter, at the level of the vCenter, I added the "Domain Admins" AD Group with all permissions and then properly connected and built the group with this set of credentials.

  I need help to debug this further.

  Thank you

  ************

  < < Updated > >

  Seems the features and functions are NOT present so you don't not sign in as '[email protected]' (SSO account by default for this "basic" configuration)

  But even with this connection, I have noticed that there is NO option in the webclient service, to perform the installation of a vCenter plug-in.  It does not appear in the vSphere Client (see images).

  I also found it weird that the web client to vCenter illustrates SRM roles but the traditional client does not work.

  Maybe it's a clue to the root cause of...

  Post edited by: ArrowSIVAC 2013-10-07 to provide more details and attachments

  Post edited by: ArrowSIVAC, this is related to the case of support for vmware 13384832210 This problem is solved.  Several pieces here. (1) vCenters were installed secretly with local account as own databases, and this is how I usually do things (2) MRS. servers were built as separate virtual machines, VMWare vs guides guess and documents in anticipation of your SRM installation on the same server as vCenter Documentation / Installer is not clarified that you MUST use domain for MRS accounts in the multiplayer linked site facilities and if you do not, the installation is completed without error, but resources will not work. Errors have for client plugin does not work. It was the symptom, the reason was that the SRM service did not work.  The service would not start and only an error in the Windows event log is 'vmware-dr stopped service' is because the connectivity issue of MRS to vCenter hosted the new SQL instance database SRM. The SRM database has been installed on the instance of vCenter server as vCenter database.  And just like the installation of default vCenter I chose localhost\administrator for database owner.  The database was filled with tables, but SRM has connectivity problems.   The fix for this was to add "domain\user" (called mine SRMAdmin and added as a member of domain admin), add this user in SQL in the list of database users and then promoted as the owner of SRM database and define the rights on DBO. This fixed the first issue. Second issue was that SRM installation set the DSN system identification information, but does not specify that they must also be domain based accounts.  The installation program is not not clear here and should only allow user domain\username when installing. After several attempts because of the root and installation methods different tried, how to get the installation complete and properly configure was to log on to the system AS the example domain account: domain\srmadmin = > Configuration System DSN by selecting "How should SQL Server verify the authenticity of the login ID?"  "with integrated Windows authentication', and then the installation of SRM to the"Enter Database user credentials"value"domain\srmadmin ".  Then and communication services to the vCenter SRM hosted DB database will work correctly. < See images attached benchmarks >

  attached files

• not be able to collect some Logs Errror: unable to connect to the remote server

  I'm trying to collect Diagnostic information requested of VMWARE and I get an error message

  Error state HOME

  Complete XX.XX.XX.xx

  Complete XX.XX.XX.xx

  YY.yy.yy.yy could not connect to the remote server

  YY.yy.yy.yy could not connect to the remote server

  Bundle of newspaper has not YY.yy.yy.yy has not generated

  VCenter Server full

  VMware Vsphere Client full

  I don't know their reasoning for this, but it seems like a pain in the thigh. Why not just export logs with the vSphere Client? File-> Export-> Export System Logs

  Or

  Use the help wizard that will allow you to collect and automatically download newspapers in vSphere?

  http://www.VMware.com/products/Datacenter-Virtualization/vCenter-support-assistant/overview.html

• Windows 8 on Vmware discovers 'the connection to the remote computer has ended. "

  Hello world

  I have problems connecting with VMware view
  I installed windows 7 and tested fine. But Windows8 x 64 is not allowed.

  The virtual machine is available on the server of the view state. pls see attached snapshot. When I try to connect to via the customer discovers my session disconnects after a few seconds with a warning "the end of the connection to the remote computer.

  When I check the console vcenter process, it seems that the user connects with no problems. But customer does not display anything and disconnects.

  what I've done so far:
  -Tried both RDP and PcOIP connections
  -Removed and reinstalled the client
  -Remove the agent from the view and reinstall client
  -Server view rebooted
  -There is no open Firewall. I'm on the same subnet
  -increases the size of memory for video display.
  -everything restarted.
  -Check the dns settings, seems to be ok.
  -removed from the field and added.

  Infra:
  ESX 5.1.0 799733
  See 5.1.2
  View customer: 5.2.1 build 937772
  VMware-viewcomposer - 3.0.0 - 691993

  I search around forums but cannot find an excat answer to this question.
  Any help much appreciated. Thank you all

  The complete list of the supported operating systems see 5.1 Agent is shown on page 15 of the installation guide - http://pubs.vmware.com/view-51/topic/com.vmware.ICbase/PDF/view-51-installation.pdf - see the section on operating systems supported for Agent view.

  You will find information on this forum of the people who got 8 windows work and to avoid the "black screen" "the connection to the remote computer has ended", but note that it is not taken in charge with Discover 5.1.x.

  Mark

• Unable to connect to the MKS: the certificate of the remote host has these problems:

  Hello

  We have a host of ESXi 4 cluster running any vSphere 4.1.  Recently, I started to upgrade to update 2 and all the additional fixes.  After the upgrade of the vCentre server to the latest version (or maybe before I can't noticed) an of are hosts began to show the following error whenever I tried to connect to the console of any guest on this host.

  Unable to connect to the MKS: the certificate of the remote host has these problems:

  It lists any problems at all and no error display in the event log that it simply does not work.  I had a prod around the internet and found nothing.  I then rebuilt the host to exclude and the problem remains.

  Any help would be much appreciated.

  Thanks in advance

  David

  If you can connect to the Console remotely using VMware Infrastructure (VI) Client connected directly to the host, take a look at vmware KB to connect to a remote virtual machine fails with the error: the certificate of the remote host has these problems

  but more generally - remove host to vCenter inventory and then add the host to the back, take a look at opening in the console of the virtual machine after a new installation of ESXi or ESX fails with the error: the host certificate chain is not complete and could not connect to the MKS: the certificate of the remote host has these problems

• Install Adobe Application Manager: "the remote server does not appropriately."

  I am running Windows 7 and have signed today for the trial of the creative cloud.  I am trying to download my first application (InDesign).  When you try to install Adobe Application Manager I download a 1866 KB file, then when I try to run it I get this error message (again and again, throughout the day): "the remote server does not properly.  Please try after a few minutes. »

  The only other things I can think of that may be relevant are 1) I have a few other licensed Adobe products installed on my drive (Photoshop, Illustrator, and Acrobat). (2) I have a few programs running, such as Spotify background; and (3) I have tried this for a work computer and I wonder if the network firewall or my permissions to download which is streaked with this place.

  Thanks for any help you can give.

  Nate_unhappycloudman this error has actually been resolved for countless people once their computer or the network is correctly configured.  We'll find a good starting point for possible causes on a computer at individual sign in or activation errors. CS6, CS5.5, Perpetual CS6 subscriptions - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html.

  If your network is managed, please contact us and work with your I.T. Department as stated earlier in this thread.