Please help [installation problem]

Similar Questions

• I'm moving my iphone iOS 5 6.14 to iOS 9.2.1 and I m getting the error below: cannot install the update ios 9.2.1 Please help installation error!

  I'm moving my iphone iOS 5 6.14 to iOS 9.2.1 and I m getting the error below: cannot install error install ios 9.2.1 update.

  what I can't finish the upgrade because of this error, please help immediately, thanks!

  As you change major versions (6-9), the complete installation program must be downloaded. Then, it must be verified and unpacked. Then to do room to write the new while the former is still partially around. He spells that require at least 6-7 GB of free space on the device for an Over The Air update to even have an inkling of a chance to succeed.

  If you do using the iTunes program on a Mac (favorite), download, verification and unpacking occurs in the computer (which has usually a lot more resources than the phone), reducing needs about 1 to 2 GB free space.

• PLEASE HELP STILL PROBLEM

  Hello guys

  I have a big problem which has already weeks and I can't solve. I want a bluray disc. I did a project in first Pro CC. A video project that takes almost 2 hours. I marked all the chapters and I exported. I also created my whole menu in photoshop. So I opened the CALLBACK to get the BLURAY. I did all of the correct procedure. Burned to a disc. The project works very well. The problem is when I put ALL PLAY and I want to jump the line, the function does not work. IE the video runs faster, but it does not track jump to another. I made 25 tracks. I can't jump from the track to another track. What I would do. Please help me. I provide this project today.

  
  

  
  

  Thank you

  
  

  Julio
  

  
  

  
  

  There are chapters on your timeline yet? Is the timeline of an entire video?

• Please help me: problem hard charting to Apex 4

  Hi guys, it's me again!
  
  I'm having a hard time creating a chart in the apex oracle 4.0. I wish it were a graphic flash with a trendline.
  
  The trend line is not very important right now, my problem is in the construction of the SQL query to generate this table. I'm wondeing if you could help.
  
  A quick overview of what it is supposed to do: children in a school to pass the exams for different academic courses. A student could write multiple reviews for the same course. Each of these reviews may contain one or several "Sections" (think of the Section A, Section B, etc.). Each section has its own amount of 'points' that contributes to the maximum overall score of the review. Pretty simple. Now the total scores of these reviews are all added to make a maximum score in a whole topic. Performance of the student in each course must be represented on the Board in a series, while the average score for an entire class is represented in another series. This bar graph to compare the overall performance of the student with the average performance of her entire class.
  
  Simply put, I ask the creating a chart bars flash that compares the maximum scores for each course with another. Once I know how to do this, it is pretty easy to figure out the rest. Now to explain my structure of database in detail:
  
  The course called "mathematics degree" for example, are stored in a table named COURSE. Its title is stored in a field called "COURSETITLE. The primary key of the table RACE is called "COURSEID".
  
  Each course can be delivered to several groups of class at a time. To manage this relationship, I have a table called COURSEOFFERING that allows to record multiple instances of the same class, each instance being delivered to another group of students. The primary key of the table COURSEOFFERING is called 'COLD '.
  
  A review takes place in what concerns a COURSEOFFERING (and not a course, as a group of classes do not have to write the same examinations as the other class includes will). Exams are stored in a table called REVIEW. The primary key of the table is 'EXID. Of course, there is a foreign key called 'COLD' that references the primary key of the table COURSEOFFERING.
  
  Now each review contains sections. These sections have their maximum point scores. The primary key of the table of SECTIONS is called 'SECID '. The field that stores the value of point of each section is called 'POINTS '.
  
  So if we have for example a review on "Mathematics in Cambridge" which is given to the class of Grade a pretty good mention, and it contains the Section has a value of 20 points and Section b which is worth 30 points, you have a review that is worth 50 points. If another review as it is worth 100 points when you add up the value of its sections, the maximum possible in mathematics from Cambridge to the honours class rank is 150. Similarly, the Grade One Special Ed class can have a different maximum possible score, according to reviews that they write to you.
  
  I created a function compiled successfully, and it DOES not work with the data (I tried to do a region of PL/SQL out of it and the display of some of the results). It returns the maximum value that is possible on a subject that takes in the ID of the COURSEOFFERING table as an argument which is titled v_coid. I don't know how to make a chart that shows the result of this function from the TITLE of the COURSE offered.
  
  

  create or replace function "MAXCOMARKS"
  (v_coid in NUMBER)
  return NUMBER
  is
  l_sum number;
  l_exid number;
  l_cotitle varchar2(50);
  exam_rec exam%rowtype;
  sections_rec sections%rowtype;
  cursor c1 IS SELECT * FROM EXAM WHERE COID = v_coid;
  cursor c2 IS SELECT * FROM SECTIONS WHERE EXID = l_exid;
  
  BEGIN
  
  l_sum :=0;
  SELECT coursetitle INTO l_cotitle FROM COURSE WHERE courseid= (SELECT courseid from COURSEOFFERING where coid = v_coid);
  FOR exam_rec in c1
  LOOP
      l_exid := exam_rec.exid;
      FOR sections_rec in c2
         LOOP
            l_sum := l_sum + sections_rec.points;
         END LOOP;
  END LOOP;
  
  return l_sum; 
  
  END;

  Note that the l_cotitle stores the title of the course, these marks are for. It is not returned, or printed or anything in this function, but I need that she either label X for each result in the series.
  
  Please help me, he had me conduit nut to do such a simple little thing.
  
  Sorry if this is long... :(
  -C
  

  Yes, the 'function of PL/SQL returning a SQL command' can be used to produce this type of query (or practically any other type, as long as the PL/SQL function returns valid SQL). I tend to limit the use of the "functions of PL/SQL that return requests" to the reports and charts that really need, which usually means a situation where the query must be built dynamically.

  In any case, I'm glad I could help.

  Tobias

• Help, please! Installation problem

  You just buy Flash Pro CS4 (though - Flash 8 Basic Upgrade).
  I have Vista and IE6
  Downloaded without problem
  I can't run the program - I went through the "three" solutions in the help section with no luck.
  I downloaded via Firefox - and at least got to the installation section - which got about 75% - and said then he had no enough space (and yet I always available 200 GB!).
  
  I think I've tried everything I can think - WHAT can do now - can anyone help?
  
  Thank you
  
  Carl

  Problem has been resolved

  Carl

• Please help, audio problem with XW6600 and NVS 315

  Greetings:

  I just buy a renovated, XW6600 Xeon dual processor, 8 GB of RAM, Windows 7 Professional 64 bit system.  The PC comes with a nVidia NVS 290 graphics card.  Everything works fine and the speaker in the motherboard Jack produces sounds.  However, when I change the NVS 290 with a NVS 315 (it is a HP 720837-001 replacement part), the sound stops working.  The speaker in the systray icon has a red circle with an "x" in it.  If I right click on the speaker, the playback device, it shows two TV as icon one above the other with a red arrow pointing down and a description on the righ side saying "Digital Audio (HDMI) high definition Audio Device not connected.   I have the same result in 64-bit Windows 8.1.  The problem is resolved, if I reinstall the NVS 290.  For both cards, I use the latest version of the nVidia Driver and driver HP.  Am I missing something?

  Any help to solve this problem is greatly appreciated.

  First of all, you want to be sure to load the latest version of the BIOS on this xw6600.  It is from the end of 2012.

  I met this problem several times... do not know if these suggestions will help, but I think that your experience may be related to previous losses audio when the latest drivers are loaded that contain "pilot high-resolution audio" in the game of video driver.

  The current Quadro NVS 315 W7 64 bit graphics drivers Quadro ODE 320.92, which work well in my xw6400, xw6600 and xw8400 workstations running several types of cards Quadro FX and NVS.  If you have used the standard installer downloaded and used the standard "recommended" install that he threw into about 5 pieces, that only one you really need (selected by default single main driver in a custom installation).  That's all I use now, throughout my nVidia installs, and I also check the clean install box on the last page before loading begins in the custom installation path that I go down.   So, to charge fees, I first uninstall anything nVidia via the control panel and then hunt around on drive C for nVidia remains in the trash.  This includes any folder with nVidia in its title, including temporarily enable Show hidden files and folders in the tab views in the Folder Options Control Panel.  I then reboot and finally make this unit "clean install" - checked - technical of custom installation.

  Try this approach first... it's easier.  You might have luck, and audio can return.

  One of the elements that was installed in the "recommended" non-custom installation was a driver of nVidia high-resolution audio.  This seems to conflict with / replace the RealTek driver who was using your audio RealTek chipset on the motherboard.  I discovered that there is a part of BIOS for those workstations which is usually hidden, but sometimes becomes visible with installing drivers high-resolution audio.  F10 in the BIOS, go to the Advanced tab, down for the terminal Options and check if rebalanced Audio appears just above monitor follow-up.  If he was not hidden by the nVidia high-resolution audio driver load then it will virtually always disable status.  Change to activate, F10 to save the change and BIOS don't forget to save changes on exit and F10 again when BIOS asks.

  We got exactly that occur as a result of installing the drivers nVidia GeForce to a GeForce GTX 650 Ti BOOST on a xw8400 and I saw that happen with these latest nVidia Quadro driver packages, too.

  This is the second best method to solve the problem, if it works.

  Another approach is to save your current BIOS settings via replicated in the BIOS Setup, load into my settings to clone xw6600 (attached) and see if the sound comes back like that.  Sometimes integrated Audio remains hidden when we F10 in the BIOS, but my clone settings was set correctly even though the option remains hidden.  You can open the attached CPQSETUP. TXT file with Notepad and Find allows you to do a search for "audio"... the second shot will be the Audio integrated, one.  Note that it is configured to allow this clone... He usually lies in a status of disable, otherwise.

  You can edit it with Notepad, except that, and charge that the version of your original settings of the BIOS using replicated Configuration changed if you want to use this technique with other types of work, such as the xw8600 workstations.  You will always find this entry via this method, even though it is hidden when you look directly into the BIOS, so it's a good thing to know.

  It is the third most easy.

  Fourth... you start dinking autour with drivers in Device Manager.

  Replicated configuration function of the BIOS with a USB, it is very easy to save your original BIOS settings, try another set of settings and return to your original if you wish.  The clone CPQSETUP. TXT file can be edited by hand (with caution) to convert a Disable to activate, for example, saved and then downloaded into your BIOS firmware.  If you want to try attached BIOS xw6600 clone settings make sure to change off the coast of the "xw66002" so that only CPQSETUP. TXT is on your USB... Replicated configuration works which with a file named exactly that.

  I posted here a few days on exactly the configuration of the workstation this clone has been optimized dethrone archive on it.

  Finally, please post back with your findings because it has become a more common problem, and the more data we have here: it is likely, we will find the fastest solution boilerplate.

• Please help - sound problem

  After reformatting my laptop and re install xp pro everything works but my sound, first suggesting I want to renew my sound card drivers or the same update my BIOS I would like to mention that I have already taken these stept, the microphone works but I have no sound coming out of the laptop...

  Any ideas?

  [Edited by: admin April 2 05 15:40]

  Hello theodd1out

  If you have two partitions, you can install the operating system one comes first by using the installation in Expert mode. In this case, all data on the second partition will be backed up. If you are using a Standard installation in this case all partitions and data will be deleted. In this case it will be created a partition and OS will be installed.

  Fenriz is the best solution to preinstall the device using the recovery CD. In this case the unit will be clean installed. Otherwise, remove the sound card in Device Manager, detect the new hardware. Reinstall the sound card and the modem driver again. If two devices are recognized and installed correctly, check the properties of audio devices and all the settings there. In the future if you have any problems, please describe the situation better. If you write, I have no sound is not easy to say what can be the problem.

  Good bye

• Please help, Virus problem, have 2 Trojan horses that I cannot remove

  I have windows XP 32 bit. A few days ago I couldn't open microsoft Web sites unless I was in safe mode. My Virgin Media anti virus keeps turning it off yourself and when I try to run microsoft virus analysis the computer just turns off. I ran Malwarebytes and it found 2 trogans with the name of microsoft in them. but when I tried to reboot the computer the problem is still there. Help, please

  Try to download and run a full system scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  If defective, then try using Windows Defender offline connection and create a bootable scanner:

  http://cyberdefend.WordPress.com/2012/01/07/boot-Windows-for-scan/

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

• Regional settings please help ADF problem

  I use ADF to develop a multilingual application
  I have a problem with the locale in dialog boxes
  
  In the index page, I placed two buttons, one for English and one for Arabic, I used the following code
  FacesContext ctx = FacesContext.getCurrentInstance ();
  UIViewRoot uiRoot = ctx.getViewRoot ();
  Locale locale = new local ("ar");
  (local) uiRoot.setLocale;
  
  works quite well with normal JSF navigation with false redirection
  but when you use the dialog box (Ex: dialog: FAQ), it does not work.
  I tried to put the local tag property of view in the JSF dialog box to be an attribute of the managed bean, but it doesn't also
  
  Help, please

  I don't see this error, but you could do more defensive custom page lifecycle code by changing lines 37-47, of CustomFacesPageLifecycle.java of:

        for (ControlBinding cb : (List)lfContext.getBindingContainer().getControlBindings()) {
          if (cb instanceof JUCtrlListBinding) {
            JUCtrlListBinding lb = (JUCtrlListBinding)cb;
            // If the list has a translatable null value
            if (lb.hasNullValue()) {
              // Force the list of values for the list binding to be recalculated
              // so that the null value text will be in the new locale.
              ((JUCtrlListBinding)cb).setValueList(null);
            }
          }
        }
  

  to do this instead:

        if (lfContext.getBindingContainer() != null) {
        for (ControlBinding cb : (List)lfContext.getBindingContainer().getControlBindings()) {
          if (cb instanceof JUCtrlListBinding) {
            JUCtrlListBinding lb = (JUCtrlListBinding)cb;
            // If the list has a translatable null value
            if (lb.hasNullValue()) {
              // Force the list of values for the list binding to be recalculated
              // so that the null value text will be in the new locale.
              ((JUCtrlListBinding)cb).setValueList(null);
            }
          }
        }
      }
  

  I'm not used to work in a locale from right to left, myself, not sure if who will present other problems.

  I just wanted you to see an example of a solution of two local which you can change if all goes well then if necessary to ensure that it works for specific local both, you need to press.

• Please help backup problem

  Hi all!  Please forgive my English.

  Log Dryrun

  dryrun - Pastebin.com

  Debug log

  http://pastebin.com/vkVT2jGD

  ESXi: 5.5

  Backup data store type: local

  I don't know why backup impossible. How to solve this problem?

  Thank you

  Well, I know what is happening now. Just tested the fix in my lab and pushed the changes to github. You can see the changes here https://github.com/lamw/ghettoVCB/commit/32487120adcf8a01b7e1ab73baa711fcc9a93bc0 or just download the latest version. Let me know if you still have questions

• Please help - installation of CentOS on VMware Fusion (Mac)

  Hi all

  Could someone please explain to me how to install CentOS as a virtual machine using VMware Fusion?

  I tried to download the 64-bit CentOS operating system and load as an iso, but it gets to a point where the installation tries to access the files on the CD (which I suppose that there are the drivers installed so that it can access it on the Mac?).

  I would appreciate your step-by-step guides, you can provide to install CentOS as a virtual machine.

  Thanks in advance

  Sean

  Hello and welcome to the forums.

  Have you downloaded the ISOs?  It seems that the installer is application disc 2 and find do not.  You must connect the ISO next to continue the installation.

  Good luck!

• Please help - installation Color Laser Jet 1600 without disc printer

  HI -.

  Really hoping that someone can put this issue to bed for me, because I spent all afternoon trying to solve this one.  I work in an elementary school as the Co-ordinator CT, one of the teachers what is the printer of the staff to settle on his laptop in the classroom, but hey guess what the disc facility is not the case to be found.  heard you can load it it from the Internet, is this correct and if so, how do I and where do I find the correct Web page.

  Thanks in advance.

  Click HERE

• problem installing windows 7 finishing installation scope and freeze for hours please help

  problem installing windows 7 finishing installation scope and freeze for hours please help

  my pc req:
  2 GB of ram
  NVIDIA geforce 210 1 GB
  180 GB
  Pentium 4 3.40
  Help, please

  Turn off the computer.

  try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards

  Right-click your video card, click on uninstall.

  Restart your system

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards
  Right-click your video card

  Driver update software; then click search automatically for updated driver.

• Hello. I purchased a CS2 product and im having problems with activation. I have the key but my installation failed in the 'summary '. Please help thanks.

  Hello. I purchased a CS2 product and im having problems with activation. I have the key but my installation failed in the 'summary '. Please help thanks. This is what im seeing.

  

  See my response in audition 3 error with installation

• Hi, I have a problem whit Creative Suite application installer. Friday I bought adobe package, but at the time of the installation tells me that your trial period has expired, when he asks license me I understand that I have a subscription... Please help

  Hi, I have a problem whit Creative Suite application installer. Friday I bought adobe package, but at the time of the installation tells me that your trial period has expired, when he asks license me I understand that I have a subscription... Please help me PS sorry for my English by Martina Faccia

  Hello

  Please see errors in connection with creative cloud and Creative Suite applications, activation and connection Solutions and Creative Cloud applications unexpectedly back in the test mode. CCM, CS6

  Hope that helps!

  Kind regards

  Sheena