problem installing windows 7 finishing installation scope and freeze for hours please help

Similar Questions

• problems installing Windows during the installation of adobe acrobat

  I tried to download Adobe Acrobat multiple times and it stops downloading saying that my "windows setup has a problem' and download needs to close?  Im not sure what is the windows installer.  Help, please!  I use vista 32 bit.

  Windows Installer - if you are unable to install programs in Windows, see the links below.

  Diagnose and resolve program install and uninstall problems automatically:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Problems installing and uninstalling programs on Windows computers:

  http://support.Microsoft.com/kb/2438651

  How to use the System File Checker tool and the sfc/scannow to solve the lack or the system files corrupted on Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929833

• Problem installing Windows on Acer SW10. It freezes

  Hello

  I applied 'Reset your PC' on my Acer Aspire SW10 and after installing Windows and complete the installation, a screen appears asking you choose between English or Spanish languages, and the frozen screen. You can move between options with the tab key in the screen, but can not choose the language or by clicking on the 'next' button to continue. I turned off and tried to 'alt + F10' to access the reset menu, but appears again the same screen, unable to move either forward or backward.

  I appreciate the help that you can give me about this.

  I could solve it with your recommendation.
  Thank you.

• I think that my system of basic windows files have been changed and currupted can someone please help!

  I get major errors that led me to think my windows files have been modified and currupted I just can't install microsoft updates they download, but I'm unable to install, I'm unable to use the Disk Defragmenter and disk scan as it said my system is already in use. I am also unable to use my acer factory restore settings because it loads but never finishes running can someone please help! I am not in a position to buy or pay for a new cd of windows so that I can make a new clean instalation as I can't afford it can someone please help!

  Download of updates of work but the installation of updates arnt working
  installation of games arnt working cd - I get errors
  disk defragment simply does not work I click top but nothing happnens - perhaps sumthing to do with priviliages admin, but I am the administrator.
  Scan disk does not work as it says system is already used but works if I put it to run at reboot
  MY acer DEFAULT factory restore setting does not work it loads but never short - that led me to believe I have no control over my privliages of basic windows system, but I am the adminsitror.

  I already had major problems when WIndows would break and stops working when you start up, I managed to solve this problem in safe mode and disabling some start up programs to check the malware was eventually attached to my system using windows scanner and malwarebytes defnder, I managed, but it seems that it is undetectable.

  I am unable to afford a new cd for a new clean instalation of windows, I think I need. can someone please

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact Acer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  http://us-store.Acer.com/RCD/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It comes to the use of the partition Recovery of Acer to restore factory settings.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  Note: During the process, all data stored on your computer will be overwritten. This means that all of your files, such as e-mail and photos, will be deleted. Therefore, we recommend making a backup of all data before starting the recovery process.

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Some manufacturers have more available Vista recovery disks.

  If this happens or the recovery Partition is damaged, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I found in my logs event before I even had my PC delivered they had a problem installing Windows 7 Premium 64-bit, and this error message is listed under Windows-Setup: 0xC000000D

  I have nothing else problems with my new system had in the past 2 months and have done two factory restores.  I get the "your video driver has failed but recovered" several times a day, it progresses freezing and, sometimes, the old bue screen.  I worked with the manufacturer and they took all original event logs before we did the restoration of 1.  After a Microsoft Update, it was even worse that I did a second on 10/18.  You went out with an update again and things seem to be OK until yesterday when it started happening again and again.  So I went in the event logs to see what they said and I found the error message a week before the system arrived even at my doorstep.  It seems whenever I did a factory restore it just keeps reloading the same problem!  Since they send you the REAL DISKS any more there is no way own things off and really repair the enrire thing - if it's still possible for an average user.  Other information: Journal name Microsoft Windows Kernel-EventTracing/Admin Source connected to kernel-EventTracing 2010-08-06 19:53:04 Evnet 3 category of task ID: Session-level: error keywords: Session OpCode: stop

  There are several other error messages that appear on a regular basis, not to mention the display driver one - that is the most obvious to me.  I saved the newspaper while they cannot get lost.  You can see that this same error message when I did the last factory restore on 10/18 is still original and mistakes so I could look at just to be reinstalled again.  My question is what is it, can it be repaired or do you need to strip ALL of this machine?  And while you will never say so, shouldn't they have taken this BEFORE they sent this computer to a client?

  Check with your PC vendor to determine if updated video drivers are available.
  Download and install if necessary. The video drivers are often buggy when
  originally published, so what you see is not unusual. I hope it's a
  minor issue if you had not seen the papers you would have noticed.
   
  "PC Nana" wrote in message news: c8aef944-7d5d-4888-8be5-839e71166366...
  > I had any other problems with my new system over the last 2 months
  > and have done two factory restores. I get the "your video driver has.
  "> failed, but recovered" several times a day, it progresses to the gel and
  > sometimes the old screen bue. I worked with the manufacturer and
  > they took all the original event logs before we did the 1st
  > Restore. After a Microsoft Update, it got even worse then I did a second
  > 10/18. You went out with an update again and things seem to be OK
  > until yesterday when it started to happen again and again. So I went in
  > the event set myself to see what they said and I got the error message
  > a week before the system arrived even at my doorstep. It seems
  > whenever I did a factory restore is just keeps the same reload
  > problem! Since they send you the REAL DISKS any more there is no way
  > own offshore things and really repair the enrire thing - if that's even
  > possible from an average user. Other information: name of the journal
  > Microsoft-Windows-Kernel-EventTracing/Admin Source Kernel - EventTracing
  > Connected on 06/08/2010 19:53:04 Evnet 3 category of task ID: Session level:
  > Error keywords: Session OpCode: stop
  >
  > There are several other error messages that appear on a regular basis
  > Also the display one - driver is it more obvious to me. I have
  > saving the newspaper while they cannot get lost. You can see that
  > when I did the last factory restore on 10/18 this same error message is
  > here and still the original errors so I could just look in
  > reinstalled again. My question is what is it, can it be repaired or do
  > you must strip EVERYTHING of this machine? And while you'll never
  > say so much, shouldn't they have taken this BEFORE they sent this computer
  > to a customer?
  >
   
   

• Description of the problem, my windows get correpted, now his watch its not authentic, please help me

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: invalid license
  Validation code: 50

  Code of Validation caching: 0x0
  Windows product key: *-* - GJY49 - VJBQ7-HYRR2
  Windows product key hash: W5/6nm6F2UPXrCkY5xUhXb / + 21 = g
  Windows product ID: 00426-OEM-8992662-00006
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.001
  ID: {FB122751-E408-48F6-B51D-8C90308A20CB} (1)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150722 - 0600
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: allowed
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {FB122751-E408-48F6-B51D-8C90308A20CB}1.9.0019.06.1.7601.2.00010100.1.0.001x 64*-*-*-*-HYRR200426-OEM-8992662-000062S-1-5-21-2962036914-1715009161-883078504AcerAspire E5-571Insyde Corp.. V1.26 20141218000000.000000 + 00001E13007018400FC04090409India Standard Time(GMT+05:30)03ACRSYSACRPRDCT109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00178-926-600006-02-1033-7601.0000-2132015
  Installation ID: 013811165395176204102634702104589473144962622625027405
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: HYRR2
  License status: Notification
  Notification reason: 0xC004F063.
  Remaining Windows rearm count: 4
  Trust time: 01/09/2015-02:07:07

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: PASS
  Event timestamp: 8:21:2015 20:54
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current Hash HWID: LgAAAAEAAgABAAEAAAABAAAAAgABAAEA6GEqkx5EoPW634gE7iyMLzI5Hr + 6eg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC ACRSYS ACRPRDCT
  FACP ACRSYS ACRPRDCT
  DBGP ACRSYS ACRPRDCT
  HPET ACRSYS ACRPRDCT
  START ACRSYS ACRPRDCT
  MCFG ACRSYS ACRPRDCT
  UEFI ACRSYS ACRPRDCT
  FPDT ACRSYS ACRPRDCT
  ASF! ACRSYS ACRPRDCT
  SLIC ACRSYS ACRPRDCT
  SSDT ACRSYS ACRPRDCT
  LPIT ACRSYS ACRPRDCT
  ASPT ACRSYS ACRPRDCT
  SSDT ACRSYS ACRPRDCT
  SSDT ACRSYS ACRPRDCT
  SSDT ACRSYS ACRPRDCT
  CSRT ACRSYS ACRPRDCT

  Hello

  Thanks for posting your query in Microsoft Community.

  I would like to ask you:

  1. When was the last time it was working fine?
  2. Remember you to any software or changes to the material on the computer before this problem?
  3. Windows 7 pre-installed or you have the product key for the same thing?

  Please refer to:

  Activate Windows on this computer

  If you encounter errors, see:

  Activating Windows: Frequently asked questions

  Windows 7 activation error: invalid product key

  Let us know the results. We will be happy to help you further.

• I too have a problem installing windows error1601. I went through the steps to get services and found that this installer of windows is gone. How can I get that back?

  I too have a problem installing windows error1601.  I went through the steps to get services and found that this installer of windows is gone.  How can I get that back?

  Try to run the Windows Installer Cleanup http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml utility to see if that solves the problems with windows install.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I installed windows vista service pack 1 and now problems

  I installed windows vista service pack 1, and now it will not connect to the printer and I have no sound! I've updated the drivers of the two, and they work both according to their status of device but no sounds or printer connection. Help, please.

  Once solve you the problems with SP1, you can then start of SP2.

  How to resolve problems that you experience after you install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948481

  A device driver is not installed or a hardware device does not work correctly after you install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948187

  Important: things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  and - how to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  Information about Service Pack 2 for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  How to get the latest Vista Service Pack
  http://support.Microsoft.com/kb/935791

• Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  original title: HELP! Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  My checksur.log said

  =================================

  Preparation of control system was updated.

  Binary version 6.0.6002.22441

  Version 9.0 package

  2011-06-29 15:32

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  (f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_4_for_KB948610~31bf3856ad364e35~x86~~6.0.6001.2123.mum line 1110: nam

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Hello

  These should help to resolve the problem:

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ==========================================================================

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  You select Download - SAVE? After download go where you put it and right click
  on and RUN as administrator.

  Download Service Pack 2 x 86 32 bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in

  Download Service Pack 2 x 64 64-bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in

  Create a new ADMIN account with your password - same then REBOOT (do not logoff) and
  log on to the new account and try the download.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  ================================================================

  If necessary, you can get free reports of incidents however generally above allows to solve this problem.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Problem installing Windows XP Mode in 7 Winjdows

  I have a problem installing Windows XP Mode in Windows 7 Pro 64 running on a Dell Latitude E6510 laptop with an i5 processor and 8 GB of ram.  This machine supports hardware virtualization, and it is enabled in the BIOS.

  Before downloading software in XP Mode, the MS download required Windows validation Web site.  Downloaded and reported validation validation and a successful installation.  Then I downloaded Windows XP Mode (WindowsXPMode_en - us.exe, 481 052 KB) installation package and the package of Windows Virtual PC (Windows6 1 - KB958559 - x 64 - RefreshPkg.msu, 16 692-Ko).  Then, I installed Windows XP Mode; the installation ran without any problems apparent and reported success.
  According to the docs of download site, the next step is to: "... click on the Windows 7 start button , and then select all programs > Windows Virtual PC > Windows XP Mode to begin the installation."
  My problem is Windows Virtual PC does not appear anywhere in the selection of all programs list - believe me, I looked.  There is, however, a new directory called
  c:\ProgramFiles\Windows XP Mode\
  but it contains no exe file.  It contains a file of 1.2 GB called Windows XP Mode base.vhd - but it is not clear what to do with it.  There is also a tutorial subdirectory.
  I tried to reinstall Windows XP Mode (without uninstalling first) but I just get a warning message that the program is already installed.  Windows XP Mode appears on the list "Uninstall or change a program" in the module programs and features in Control Panel.
  I tried running (Windows6. 1-KB958559-x64-RefreshPkg.msu(Windows6.1-KB958559-x64-RefreshPkg.msu, goal that throws error 0x8007000d, "The data is invalid."
  If at this point, my question is simple, "what to try next?
  Thanks in advance.

  The right way to install Windows XP Mode, you must first install Windows Virtual PC, and then install Windows XP Mode.

  You must install both files:

  1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run

  Restart the system, and then install:

  2 WindowsXPMode_en-we

  ------------

  Uninstall Windows XP Mode:

  Click Start, type: programs and features

  Press enter on your keyboard

  Scroll down

  Select Windows XP Mode

  Click Change/uninstall in the command bar

  Uninstall Windows XP Mode

  -----------------

  Restart your computer

  Proceed with the installation of Windows XP Mode in the right order.

  --------------

  If it does not always show upward:

  Click Start, type: enable or disable windows features

  Scroll down

  Make sure that Windows Virtual PC is checked

  Click OK

  Reboot if prompted

  -------------------

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

• I have a PC with Vista, I tried to install Windows XP, it was rejected, and now I don't have an operating system

  I have a PC with Vista, I tried to install Windows XP, it was rejected, and now I don't have an operating system

  Bruce,

  Do you remember if you wanted to do a new installation or had you partitioned your hard drive to install it in a dual boot with Vista?

  If you do not have a BONE now it sounds lik evous was the first choice that clears your current installation.

  You need to reinstall Vista from your original media to recover your system if this is the case.

  Unfortunately, if this is what you choose, you have lost all the data that was on your hard drive as well.

  Sorry to be the bearer of bad new possible.

  Rich

• Installation installation of Win Vista Home premium error Windows errors can not reset the deployment engine. to install windows, restart the installation.

  Original title: Error Installing Win Vista Home premium.

  I have a PC with Windows Vista Home Premium.  Suddenly, it wouldn't start.  I changed the boot CD ROM and put my Vista disc in and tried to do a "repair" that it came with missing engine or something like this.  After several attempts, I gave up and formatted hard drive losing all my data and programs (rather difficult to backup files when the computer does not start).  So, I tried a complete installation.  I put in the license code and he started the installation.  After a few minutes, the message came;  "Windows Setup could not reset the deployment engine.  to install windows, restart the installation.  I tried several times including completely turn off the computer for several minutes and try again.  I tried several times.  I thought oh well, I will install my Windows 7 program (this and never used).  Error on this installation was: your CPU is only good for 32 bit and Win 7 I have is a 64-bit version.  I'D RATHER INSTALL VISTA BUT need help on the error regarding the deployment engine.  Thank you, Lloyd

  Hello

  See if this solution works for you:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Windows-Setup-could-not-reinitialize-the/f9e6f3e6-EA80-487F-8d86-36c793f7c152

  See you soon.

• I would like to install Windows XP on my computer and get rid of the Vista operating system. Can I do this? I only have 512 MB of Ram and 32-bit processor.

  Windows XP instead of Vista.

  I would like to install Windows XP on my computer and get rid of the Vista operating system.  Can I do this?  I only have 512 MB of Ram and 32-bit processor.

  Hello

  There are a few things that you would have to do to install XP instead of Vista:

  1. contact the manufacturer of your computer and see if the XP drivers are available for your computer model to make sure that XP has worked properly in this regard.

  2. If the XP Drivers are available, buy a XP disk operating system / license. Try local computer repair shops because Microsoft sells more than XP and online sale buy you pirated copies can cause. Be very careful.

  3 XP runs with 512 MB of RAM, although a little slow by today's standards.

  4. do a clean install of XP. Make sure that all your data is backed up as the hard will be cleaned of everything during the Installation of XP.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  Here is some information that you would like to learn more about improving the performance of Vista using ReadyBoost, you have only the minimum amount of RAM to run Vista:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  See you soon.

• Cannot install windows vista service pack 1 and 2 error: 8007006E

  Original title: Windows Service Pack 1 and 2 will be not updated

  I tried a few times to download the Service packs 1 and 2 so that I can reinstall my Windows live messenger. I didn't have time to let it run full the last time, but this time, her gives me: "error (s) found: Code 8007006E - Windows has encountered an unknown error.

  Usually I have no problem with my updates, they fit very well. This time, of course when I need it, he decides to not work (Murphey's law).
  How to fix this or get to download correctly, so I can reuse my Messenger? I uninstalled my Messenger when it stopped working (would not allow me to connect to all) for about a month or two.
  Thank you!!!

  Hello

  1. can you install other windows updates?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058

  Method 2:

   Try to put your computer in a clean boot state, and then try to install Windows vista service pack 1 and 2 manually.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Try to install Windows vista service pack 1 and 2 from the link below.

  Service pack 1: http://windows.microsoft.com/en-US/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Service pack 2: http://windows.microsoft.com/en-US/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  You can also consult the following link for more information:

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

• Hello guys, I installed Windows which was not original, and now it's not true, I do not know the product key.

  * Original title: product key

  Hello guys, I installed Windows which was not original and now it's not true, I do not know the product key and I want to activate how?

  If the edition installed does not match the edition, you have a product key because it will not activate.

  If you have a product key for the specific edition installed, try the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us