Please help put in place the second router Wireless extender

Similar Questions

• Use the second router to extend the network to Time Capsule

  I have a v7.6.7 running Time Capsule 1 TB and older airport. I'm hoping to add a second router in a new location, and I use an ethernet cable from the TC at the new router (TP Link Archer C5), updated to the latest version of the firmware. The IP address of the TC is 192.168.1.1.

  I have set up my router C5 as follows: allocation of IP 192.168.1.199, value DHCP = off, and I connect a cable between the TC ports and port WAN (not Internet) available on the C5. In the C5 wireless settings, I tried both using the TC SSID and pw and creating a new SSID and pw. In both cases, the network will work for a short time, but eventually the entire network, including the TC, stops working. I made no changes to the parameters of the TC on any trial.

  Is it possible to use a TC and a router not Apple on the same network? If so, what are the right settings for the TC and the secondary router? If not, is it better to have the not Apple as main router and add the TC to the network created by the non-Apple router?

  Is it possible to use a TC and a router not Apple on the same network? If so, what are the right settings for the TC and the secondary router?

  Yes. That would be the basis of a network of mobile type.

  The key for a roaming network parameters are:

  • The 'primary' router must be configured as a router. In other words, it must have active NAT and DHCP services.
  • All other routers used in a network of roaming must be reconfigured as a bridge.
  • All routers must broadcast a Wi - Fi network that uses the same network (SSID, aka) name, and the type of wireless security, and the password.
  • All routers must be interconnected by Ethernet. To provide Powerline adapters using an Ethernet connectivity should also work.

  If not, is it better to have the not Apple as main router and add the TC to the network created by the non-Apple router?

  Should not really which is the main in the roaming network.

  I think at this point, your current circuit line. To check that, I would suggest that you consider to bring back the router C5 in the same room as you have the TC. Then connect it directly to one of the LAN of the TC ports. Complete the entire upward to a mobile network and test it. If everything works, bring back the C5 in the desired location, and then try again.

  If it fails, then the circuit line will be tested to check that it provides a solid 'Ethernet' connection between the adapters.

• How do to set a new password to be put in place a second Director

  Original title:

  Administrator password

  I just bought a computer laptop second hand

  the previous owner my son says he doesn't remember his administrator password

  It is severely restricting my

  can u please tell me how do to set a new password to be put in place a second Director

  Thank you

  Click Start, click Help, and then search help on the password to see how it's done.

  However... using a computer used "like what" is high risk. There could be more viruses that a dog has fleas or it could have been hacked. The only course of action is to perform a destructive factory restore, using the hidden disk partition. This will make the machine 'as new '. Consult the manufacturer's web page for detailed instructions.

• additional NIC connected to the second router interface does not have IP

  Hi I have an esxi5 running on the hp with two physical NICs micro server that is visible on esxi as vmnic0 and vmnic1. Initially, I was working with vmnic0 as a main network as the interface of management and also VM NIC that is connected to my internet. No problem here. Now, I plugged the second card which is represented as vmnic1 to another router in my house that has its own separate subnet by wire of physics. This second router has its own Dhcp and set up correctly as I connect my mobile phone and tablet that and gets its ip DHCP server. However vmnic1 receives not all IP address. Here is the configuration:

  Phys. netcard vmnic0 192.168.1.254 (obtained from internet router ip) no problems, related to the management network vSwitch0

  Phys. netcard vmnic1? any IP connected to separate vSwitch2, physical network is connected to the router with DHCP with the range 10.0.1.2 10.0.1.1 - 10.0.1.100

  To debug effort, I imported vmnic1 in the virtual machine running on that ESXi and static ip address assigned 10.0.1.101, whereas it falls in the same subnet as the second router and tried to ping router (10.0.1.1) however got "destination unreachable". Obviously ping can't the second router.

  So my question is why? Can anyone help on this?

  I put below the esxi Network Setup:

  Thank you!

  I just pointed it arbitrarily when I created vSwitch2, does not interfere the vSwitch0. 2nd router lacks any setting of vlan.  Should not do and leave the vlan by default? Thank you

• BlackBerry Z3, I lost all my data on my SD storage card, please help me to retrieve the data.

  Dear Sir.

  I lost all my data on my SD storage card, please help me to retrieve the data. I have a Z3, just bought only a week before, I removed the card with the phone off and then give the card again and noticed that I lost all the data. Please help

  Try restarting your phone. Sometimes it shows data that brought them "disappeared". To do this, hold down your power button for about 15 seconds, until you see BlackBerry on your screen. Do not release the button until you see that without taking account of any other thing you see before that.

  Try this and post back with your results.

• Please help me to do the math, my iPhone6(16G) run out of storage

  Background: iPhone6 16G

  Q1: 16G is equal to 11.6 G? Is that mean 16 = 11.6? My storage of 4,4 G to go?

  

  Q2: Why the sum of the storage that has been used by all applications is not equal to the storage you use?

  (4.9 * 1024 + 319 + 189 + 182 + 131 + 110 + 104 + 98 + 93 + 91 + 89 + 88 + 88 + 87 + 83 + 83 + 81 + 77 + 72 + 66 + 63 + 59 + 58 + 55 + 53 + 51 + 51 + 49 + 47 + 47 + 45 + 42 + 39 + 34 + 33 + 32 + 32 + 21 + 10 + 20) / 1024 = 7.80234375 = 11.3?

  

  

  If Please HELP me to DO THE MATH!

  yuzhou627 wrote:

  Q1: 16G is equal to 11.6 G? Is that mean 16 = 11.6?

  In fact, Yes.

  How to report the storage capacity - Support Apple OS X and iOS

• Compaq Mini: Please help me to RESET the password of bios Compaq Mini

  Please help me to RESET the password of bios Compaq Mini cnu93666w8

  Thank you

  @jack4100

  Enter: e9lofgggdu (3rd character is a lowercase L)

  Kind regards

  DP - K

• I need to put in place the security of the laptop running finance and don't know the programs and the finest details of it.

  Security

  I need to put in place the security of the laptop running finance and don't know the programs and the finest details of it. I need to buy, sell and subscribe. I need to use programs such as paypal also.

  You have antivirus installed? If this isn't the case, I would install Microsoft Security Essentials (MSE) for you antivirus protection.

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  Windows 7 is really quite safe as is and does not need a lot of work to ensure.  There are a few FixIt who can put in place and ensure that it is set using the recommended security settings.

  http://support.Microsoft.com/mats/windows_security_diagnostic/en-us

  http://support.Microsoft.com/mats/Malware_Prevention/en-us

  http://support.Microsoft.com/mats/ie_performance_and_safety/en-us

  Just run the fix it is and install MSE and you should be sure resonably.

• I currently own Adobe Creative Suite 5 Master Collection. My computer crashed and I was unable to disable the program. Please help me to reinstall the programs, given that I have exceeded the download due to problems with my computer. Thank you

  I currently own Adobe Creative Suite 5 Master Collection. My computer crashed and I was unable to disable the program. Please help me to reinstall the programs, given that I have exceeded the download due to problems with my computer. Thank you

  Hello

  Please see the thread: https://forums.adobe.com/thread/2028937?start=0&tstart=0

  Kind regards

  Shelly

• Please help: error creating files the digital certificate is not valid

  Hello, I have a problem to publish .air for Flash Professional CS5.5 desktop. When I create the certificate (.p12) file, and then click Publish but apparently alert dialog box is "error creating files the digital certificate is not valid. Your certificate has expired the Mar Mar 12 15:34:32 ICT 1963 "How could I do to solve this case and export the only desktop .air file?

  Double post, responded to Please help: error creating files the digital certificate is not valid.

  Locking thread.

• Please help, data queue on the remote server

  Hello Experts,
  
  Kindly help, to learn how to roll up the data from the remote server. I need a detailed procedure to make settings on my local machine to connect to remote Oracle using SQL Server * MORE.
  
  I installed on my local machine which is 32-bit Oracle 11 g Release 2:+.
  
  SQL * more: Production of release 11.2.0.1.0 Fri Feb 8 12:02:30 2013
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  Enter the user name: SYSTEM
  Enter the password:
  
  Connected to:
  Oracle Database 11g Release 11.2.0.1.0 - Production
  
  SQL >
  
  and on a remote server below is the version installed.
  
  Log in as: B_DB1user
  [email protected] password:
  Last login: Sat Feb 7 18:19:35 2013 10.10.167.8
  [B_DB1user@bamdb001 ~] $ sqlplus
  
  SQL * more: version 11.1.0.7.0 - Production Fri Feb 8 12:06:35 2013
  
  Copyright (c) 1982, 2008, Oracle. All rights reserved.
  
  Enter the user name: B_DB1user
  Enter the password:
  
  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
  With the partitioning, Real Application Clusters, OLAP, data mining
  and Real Application Testing options
  
  SQL >
  
  ----------------------------------------------------------------------------------------------------------------------------
  That's what I have in tnsnames.ora
  
  tnsnames.ora # Network Configuration file: E:\app\managerproj3\product\11.2.0\dbhome_5\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  LISTENER_ORCL =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  
  
  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl.10.167.8)
  )
  )
  
  ---------------------------------------------------------------------------------------------------------------------------------
  That's what I have in listener.ora
  
  
  listener.ora # Network Configuration file: E:\app\managerproj3\product\11.2.0\dbhome_5\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  AUDITEUR1 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.10.167.8)(PORT = 1521))
  )
  )
  
  ADR_BASE_LISTENER1 = E:\app\managerproj3
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  )
  )
  
  ADR_BASE_LISTENER = E:\app\managerproj3
  
  ------------------------------------------------------------------------------------------------------------------------------------------
  
  
  Database server: ORACLE
  HOSTNAME: BAMDB001
  IP address: 156.1.3.4
  
  
  and here is the script I tried data spool in the local computer using SQL * MORE
  
  set colsep,
  set pagesize 120
  Set trimspool on
  headsep off Set
  set linesize 1000
  
  coil D:\test\myfile.csv
  
  Select table_name, tablespace_name of all_tables;
  
  spool off
  
  It is effective on the local machine... Please help me to get the data from the remote server to the local computer?
  
  Kindly let me know if you need anything whatsoever.
  
  Thanks in advance
  
  Kind regards
  Bosch

  Is not more or less the same question you asked in {message identifier: = 10835497}?

  You must have a user to the remote database and an entry for the remote database in your tnsnames.ora file

  If you have just to coil of database of remote and local database didn't need to be involved:
  Edit your tnsnames.ora and add an entry with the remotedb, the information and you need to have the following information:

  Ip address or the name of the server (BAMDB001?)
  Name of the service (?)
  Port configured for this database. (??)

  Also, you must be sure that the connectivity of your local computer to a remote server is granted (without firewall block).
  Only when you have this information, you can connect to the remote database from your laptop.

  From the Unix server where you connect to the database, you can get the information to be inserted in your local tnsnames.ora by typing:

  tnsping dbname
  

  Of course, you need to replace dbname with the name of your database.
  Another way is to check the remote tnsnames.ora when logged in Unix:

  cat $ORACLE_HOME\network\admin\tnsnames.ora
  

  and check the configuration it.

  Kind regards.
  Al

• Please help me to write the plsql code

  Hello
  
  Please help me to write a program to retrieve the empno in plsql table and update the salary up 10% to help "for all" and handle exceptions using predefined '% bulk_exception' attribute. I asked today by the interviewer. Please help me
  
  Name of the table: emp
  
  emp_no ename sal
  100 John 5000
  101 3000 miller
  102 roy 3500
  104 tom 2000
  
  Published by: Anill Sep 8, 2012 22:17

  Anill says:
  Hi Biju,

  I agree what you say to the workout. Please do not treat it as laziness. I have no knowledge on 'for all' and bulk_exception attributes. So, I asked help to learn and gain some knowledge.

  Published by: Anill Sep 8, 2012 22:39

  This?

  declare
  type test is table of varchar2(2000);
  v_array test;
  l_err_cnt number;
  l_errors exception;
  pragma exception_init(l_errors,-25000);
  begin
  select empno bulk collect into v_array
  from emp;
  forall i in v_array.first..v_array.last save exceptions
  update emp set sal=sal+((sal/100)*10)
  where empno=v_array(i);
  exception
  when l_errors then
  l_err_cnt := sql%bulk_exceptions.count;
  for i in 1..l_err_cnt loop
  dbms_output.put_line('error: ' || i ||  --Handle Proper Error log table
  ' array index: ' || sql%bulk_exceptions(i).error_index ||
  ' message: ' || sqlerrm(-sql%bulk_exceptions(i).error_code));
  end loop;
  end;
  

  Talk to interview if we use in bulk collect, it consumes more memory PGA. then say do it in pure SQL.
  If they want to manage the DML ERRORS and then tell them that I will use DBMS_ERRLOG. CREATE_ERROR_LOG ('table_name')

• Please help me to find the link to downlaod oracle BI experience

  Please help me to find the link to downlaod oracle BI experience
  I got experience in obiee, so where can find
  
  Thanks in advance

  Hello

  Discoverer belongs to BI Standard Edition. You can load BI from here. You need the 2 CDs for Discoverer Plus and Viewer and the CD-ROM of the discoverer Admin tools and office.

  You must also apply the patches to go to the latest version. The LearnDiscoverer blog has details of the latest patches.

  Rod West

• Try to put in place the PIXMA MX922 on a student network. Help!

  My PIXMA MX922 does not place on my student network. My network is the kind you will first need to get on the student network, then download software so you can connect. I need to print wireless and I can't do and I already have stuff to print. Anyone out there that can help, I appreciate it and get it quick print! I'm on a MacBook Yosemite running.

  Well, I think that after pouring on the manual online I found a solution for wireless printing. Bluetooth. I ordered a dongle used on Amazon for $10 - a Canon suggested, the D - Link DBT - 120 Bluetooth USB Adapter Wireless. There is absolutely no way printers can work on most college networks. The reason being that they are public networks and basically anyone can use the printer from anywhere. Therefore, the only other option is a local printing solution. But instead of a cord that need three people to connect whenever they need to print, optional Bluetooth works great and it is easy to put in place.

• USB WI - FI put in place the question

  I bought a unit of wi - fi usb Conect my Wii to the internet through a wireless network. After reading the instalation instructions, I have more questions than ansures. I hope someone can help. is first of all the States; Open tool EDUP wireless LAN configuration to select the function for this adapter wireless Station or Access Point. I'm not shure I need? The next question is if I need to put in place as a poit of access that they tell me to go into the configuration advaced to the Wireless Network Connection and select the services that are running on my network internet, useres who has access. With the list displayed that I have no idea what kind of security issues that I've created posibly. Please, any help is aprisheated.

  Hello I Ness. I had the same problem myself, so I did some research and decided to write a tutorial about it on my site.

  By chance I have tutorial on Wii connection options, which can be found via the links below:

  http://chafflube.WordPress.com/2010/10/19/how-to-connect-your-Wii-to-the-Internet-via-Wi-Fi/

  http://chafflube.WordPress.com/2010/10/19/how-to-connect-your-Wii-to-the-Internet-via-LAN-USB/

  http://chafflube.WordPress.com/2010/10/19/how-to-connect-your-Wii-to-the-Internet-through-your-PC/

  Good luck with your Wii connection! One of these tutorials is sure to meet your needs.