Please help: registry error 80246008 BITS missing and service for win vista 32-bit

Similar Questions

• When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again

  • When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again

  Hello LisaQuaranto,

  I suggest that you configure the computer to start in minimum mode, download the update from the Download Center and try to install the update.

  To perform a clean boot on a computer that is running Windows Vista:

  a. Click Start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  b. on the general tab, click Selective startup.

  c. under Selective startup, clear the check box load startup items.

  d. click OK.

  e. When prompted, click on restart.

  f. after the computer starts, check if the problem is resolved.

  If your problem is resolved after the clean boot, and then follow the steps in the following article to narrow down the exact source:

  http://support.Microsoft.com/kb/929135

  In addition, refer to the section on how to restore your computer to a Normal startup mode by following the steps under "Reset the computer to start as usual", after performing the clean boot troubleshooting.

  You can download the update following the link below:

  http://support.Microsoft.com/kb/968930

  Thank you
  Irfan H, Engineer Support Microsoft Answers

• Computer Mangement.lnk unspecified error. Please help me by saying its cause and what could be the solution for it.

  Computer Mangement.lnk unspecified error. Please help me by saying its cause and what could be the solution for it.

  Clear the error on windows server 2008. All of the above files are locked.  We maintain active directory on and it is also not working.

  Help, please.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I would also ask you to contact your IT Department for further explanations.

  I hope this helps.

• Hi Please help me B1-711 were break and I don't have any apk rom? What should I do?

  Hi Please help me B1-711 were break and I don't have any apk rom? What should I do?

  It may start at Acer logo?

  If so try to factory reset using the key combination:

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/29892/~/Acer-Iconia-B1-A71-and-B1-710-factory-d...

  the download of rom is for version ww_GEN1:

  Acer.AV0K0.B1 - 711.RV02RC05.WW.GEN1

  must be updated via microSD update

  http://global-download.Acer.com/GDFiles/OS/OS/OS_Acer_Acer.AV0K0.B1-711.RV02RC05.WW.GEN1_A44K_A.zip?...

• I'm trying to stop my creative with my students cloud subscription, please help! He just automatically renewed and I didn't want it.

  I'm trying to stop my creative with my students cloud subscription, please help! He just automatically renewed and I didn't want it. When I go online to cancel it and he tells me that my options of communication, the forum is the only one available.

  This is an open forum, not Adobe support... Click below

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Cancel https://helpx.adobe.com/creative-cloud/help/cancel-membership.html

  -or https://helpx.adobe.com/contact.html?step=ZNA_account-payment-orders_stillNeedHelp

  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  If the above does not work, you will need to contact cat

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  Do NOT let the cat shipment no one will remind you this forum... only Adobe can help, nobody here can access the activation server

• I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works

  I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works?

  Try to hold the alt/option key while you restart Lightroom. Make sure that the right catalog file is selected and click on the "integrity test" box to see if there is a problem with the catalog file that might be repaired.

• R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista

  R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista
  This message is pop:
  Microsoft Visual C++ Runtime library
  Runtime error!
  Program c:\windows\helppane.exe
  R6034
  A request made an attempt to load the wrong C runtime library
  Please contact the support team of the application for more details
  This message appears as soon as the machine restarts
  Happens if I try to run Skype
  There is no problems until the updates have been installed
  This problem is urgent that this computer is used for a company
  Thank you
  David Schlachter

  Hello

  In addition to the suggestion of J W Stuart MVP I ask you to re - install the Microsoft Visual C++ 2008.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86) for 32-bit editions of Windows
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a5c84275-3b97-4ab7-A40D-3802b2af5fc2&displaylang=en

  Microsoft Visual C++ 2008 Redistributable Package (x 64) for Windows 63 bit editions
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd2a6171-e2d6-4230-B809-9a8d7548c1b6&displaylang=en

  Then uninstall and reinstall the software Skype and check.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Please, help me to turn on my Bluetooth device for me.

  OT:

  Activate Bluetooth in Windows 8 Pro

  I had HP for laptop - 15-r264tu in which Windows 8 Pro is installed and everything seems to go well except the device Bluetooth is switch off. I tried searching how to turn on my Bluetooth device and I tried the laptop settings / PC and devices / Bluetooth, but it found only and cannot turn on but failed. Please, help me to turn on my Bluetooth device for me.

  Elvish Hello,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because of lack of permissions in Windows.

  Please make sure that you are logged on as administrator.

  If this does not help, then you can manually download the driver file, take ownership of the file and then try to install it.

  Please see this link:
  "Access denied" or other errors when you access or work with files and folders in Windows
  https://support.Microsoft.com/en-us/KB/2623670

  You can also run the hardware and devices Troubleshooter and check. Please follow these steps:

  a. press Windows + C keys and click on Search.
  b. type Troubleshooting in the search box and click on it in the search results.
  c. click 'show all' and then click 'hardware and devices'.
  d. click on 'Next' and follow the on-screen instructions.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Hello, please help me. I use a power keyboard for my laptop. I see in the new keyboard is equipped with a num lock key is turned on. I can't use on it please help me disable it. I do not use a NumLock on. Thank you

  Hello, please help me. I use a power keyboard for my laptop. I see in the new keyboard is equipped with a num lock key is turned on. I can't use on it please help me disable it. I do not use a NumLock on. Thank you

  You say that when you press the NUM LOCK key, the Numlock State does not change (if enabled to disabled and vice versa)?  Have you tried to unplug the keyboard and by ensuring that the keyboard of the laptop does not have enabled Numlock?  If so, turn it off on the laptop keyboard and reinsert the another keyboard and see if the problem is resolved.

  If you do not need the Numlock key, it can be disabled at startup with the following procedure:http://www.technipages.com/enabledisable-numlock-at-login-or-startup.html. Once this is done, I don't think he's going to turn on or off and that they the keyboard will start in the off position.  You will not be able to use the key yourself or another, but maybe the problem she is on (which is worse than it to be impossible to be turned on) will be resolved and I hope it will be enough for you.

  If the key does not work and you want to be able to use it, the keyboard may be defective.  Try the keyboard on another computer and see if you have the same problem.  If so, the keyboard is defective and must be replaced.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Hello! Can someone help me with the address of repair service for Palm TX?

  Hello! Can someone help me with the address of repair service for Palm TX?

  Good luck and please, let us know here how it works for you.  We like to know current resources, which can help to solve the problems of people with these older devices.

• Does anyone have a solution to error 80096001 for Win VISTA

  Does anyone know a quick fix to the error 80096001 for Win VISTA?  Please answer as soon as POSSIBLE

  Hello, Pauledwards007,

  Is - this related to Windows Update?

  Run the update for your version system preparation tool - may have to run it twice

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool

  Retry updates

  Reset the Windows components - first of all, use 'default' mode then go back and use the "aggressive" mode

  http://support.Microsoft.com/kb/971058

  Retry updates

• Where to find drivers for Win Vista LAN, BT and Wifi for Aspire V3 - 571G?

  Where to find drivers for Win Vista LAN, BT and Wifi for Aspire V3 - 571G?

  

  Try this, 100% reliable Web site:

  http://www.station-drivers.com/index.php/downloads/func-startdown/633/

• Windows Fax and Scan for Windows Vista does not appear under all programs

  Windows Fax and Scan for Windows Vista does not appear on my computer under all programs - where he might or he is still in charge?

  If you have Vista Home Basic and Vista Home Premium, they do not come with Fax software included.

  You will need software 3rd party Fax:

  http://www.SnapFiles.com/reviews/Snappy_Fax_2000/snappyfax.html

  Snappy Fax 2000 allows you to send and receive faxes from your computer. You can use your scanner to scan documents and then sent a fax to any fax machine, or use the print command other applications to use the virtual fax printer, allowing you to send faxes directly from most Windows applications. In addition, the program also supports faxes sending via the internet, filtering of unwanted faxes and transfer incoming faxes to other fax or e-mail addresses. Additional features include import address book, faxes by email (with zip for images support), OCR, spell checking and much more.

  See you soon. Mick Murphy - Microsoft partner

• BlackBerry smartphones * code Please HELP ANYONE * error 507 and new for BlackBerry!

  I bought my new Blackberry "BOLD", the Manager of office installed on my computer and Device Manager installed as well for the "BOLD" of 4.7.  When I plugged in my camera for the first time to fund manager began through a procedure and update the phone.  After a few minutes he said it was a mistake of some sort, that the backup was on the computer and use to fund manager transfer on the phone.  I opened the Desktop Manager, and does not recognize the phone.  Give me just a DTM vacuum with no connection and no option either.  Please someone help me, this causes a lot of stress for a new phone.

  Ok!!  I solved my problem (with the help of MANY people here or by phone).  I wanted to implement EXACTLY what I've done so that no one has yet this headache.

  This is for people who have some kind nuked Blackberrys or receipt error message 507.

  Step 1: My problem initially was the destop Manager (DM) and the operating system (OS) that I tried to download.  Two of them that I found online from blackberry.com and ATT.com.  They were correct, but for some reason versions DM messed up during installation.  It looked OK, but as I had no idea of what it was supposed to look like at, I knew not the wisest.  This is what it looked like to me:

  

  Step 2: If it happened to you, RE INSTALL THE DTM!, do not UNINSTALL.  When reinstalling, it will ask you if you want to modify, repair or remove.  Click on repair and move forward.  This will install the file that was missing, for me it was software.msi of blackberry desktop.

  Step 3: Now install the OS of your provider

  Step 4: Do not open the DM!  Instead, click on start > my computer.  Click local disk > Program files > common files > Research In Motion > Apploader.  Then search for the file named "loader", there must be an icon phone little next to the name.

  Step 5: this will launch the application loader.  Remove the battery on the back of the phone.  Now plug the phone DIRECTLY into the USB port.  Don't use hubs or anything like that and make sure that you use the BACK USB ports, those are made for mass information.  Then click in the apploader, it will say "UNKNOWN USB" that's fine, just after...

  You will get a screen of control everything you want to download, go ahead and take your things, some you can't.  and then click Next.  It will give you a list of all you send to the BB.  Hit next and sit, make sure the computer will not sleep or Hibernate or screensaver for this can interrupt the download!   I did this and for some reason any upload took forever and I kept getting this screen:

  

  Encountered unknown error [J:0 x 00000005]

  I had no idea what to do.  I went out and bought a USB cable for cameras and MP3 players.   It was Belkin and make sure its GREAT SPEED!  I came home after MANY attempts with my other USB cable (motorola razr) and plugged it up, done what above, and it worked in 10 minutes, rebooted and back to factory settings.  I am so relieved that I wanted to put this up immediately.  I hope this helps you all!

• I'm moving my iphone iOS 5 6.14 to iOS 9.2.1 and I m getting the error below: cannot install the update ios 9.2.1 Please help installation error!

  I'm moving my iphone iOS 5 6.14 to iOS 9.2.1 and I m getting the error below: cannot install error install ios 9.2.1 update.

  what I can't finish the upgrade because of this error, please help immediately, thanks!

  As you change major versions (6-9), the complete installation program must be downloaded. Then, it must be verified and unpacked. Then to do room to write the new while the former is still partially around. He spells that require at least 6-7 GB of free space on the device for an Over The Air update to even have an inkling of a chance to succeed.

  If you do using the iTunes program on a Mac (favorite), download, verification and unpacking occurs in the computer (which has usually a lot more resources than the phone), reducing needs about 1 to 2 GB free space.