Please help the issue

Similar Questions

• RMAN-03009: failure to allocate command on ABC1 channel: Please consider the issue.

  I try to referesh a backup of the production database.
  
  My version of the database is: 11.1.0.7.0
  
  Backup is located on the tapes, which are available at the present time.
  
  Please see the scritp I'm runnning. and help me how to fix the error below.
  
  
  SQL 'alter session set optimizer_mode = RULE;
  UNTIL "2011-03-24-09: 21:45 ';"
  ALLOCATE channel AUXILIARY ABC1 DEVICE TYPE SBT_TAPE PARMS 'SBT_LIBRARY=/usr/openv/netbackup/bin/libobk.so ';
  ALLOCATE channel AUXILIARY ABC2 DEVICE TYPE SBT_TAPE PARMS 'SBT_LIBRARY=/usr/openv/netbackup/bin/libobk.so ';
  ALLOCATE channel AUXILIARY ABC3 DEVICE TYPE SBT_TAPE PARMS 'SBT_LIBRARY=/usr/openv/netbackup/bin/libobk.so ';
  ALLOCATE channel AUXILIARY ABC4 DEVICE TYPE SBT_TAPE PARMS 'SBT_LIBRARY=/usr/openv/netbackup/bin/libobk.so ';
  ALLOCATE channel AUXILIARY ABC5 DEVICE TYPE SBT_TAPE PARMS 'SBT_LIBRARY=/usr/openv/netbackup/bin/libobk.so ';
  ALLOCATE channel AUXILIARY ABC6 DEVICE TYPE SBT_TAPE PARMS 'SBT_LIBRARY=/usr/openv/netbackup/bin/libobk.so ';
  ALLOCATE channel AUXILIARY ABC7 DEVICE TYPE SBT_TAPE PARMS 'SBT_LIBRARY=/usr/openv/netbackup/bin/libobk.so ';
  ALLOCATE channel AUXILIARY ABC8 DEVICE TYPE SBT_TAPE PARMS 'SBT_LIBRARY=/usr/openv/netbackup/bin/libobk.so ';
  SEND "NB_ORA_SERV = msssn1.soat.com, NB_ORA_CLIENT = mssn1.soat.com";
  DUPLICATE THE ABC TARGET DATABASE;
  OUTPUT CHANNEL ABC1.
  ABC2 CHANNEL;
  OUTPUT CHANNEL ABC3.
  OUTPUT CHANNEL ABC4.
  CHANNEL ABC5.
  ABC6 CHANNEL;
  OUTPUT CHANNEL ABC7.
  OUTPUT CHANNEL ABC8;
  
  =====================================================================
  
  Error message...
  
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03009: failure to allocate command on ABC1 channel to 26/03/2011 05:30:05
  ORA-19554: error device allocation, type of device: SBT_TAPE device name:
  ORA-27211: unable to load the media management library
  Additional information: 3857
  
  Published by: 784786 on March 26, 2011 03:19

  Which third-party library management (for example ibm TSM etc.) do you use?

  It seems that this is problem of backup server, which could be the possible reasons:

  1. the customer node is not registered correctly.
  2 backup server is busy and not able to allocate channels to a customer's request.
  etc.

  have ever run you backup for this computer?

• (Redirect) Please help with issue of source POS

  My son is in jail and I would like to make a visit to home video with him, but I can't because of a stupid source vdp problem.  Facilities support told me that my camera does not know what video source to use.  When the camera is in place and you click on settings, there source POS and a built-in Webcam.  They say it should only be a device listed in there.  Until I get this is correct, I can't visit with him.  I took my laptop to a repair shop and he had no idea how to remove it. What I did research, it has something to do with Bluetooth, which I don't use.  Can I uninstall it and solve the problem?  I already turned off Bluetooth, but that did not help.  You can provide ANY help would be greatly appreciated.

  Thank you

  Hi Jdunn28,

  Please repost this in the laptop computer forum for faster assistance.

  http://en.community.Dell.com/support-forums/laptop/

• I accidentally deleted the setting wireless network connection icon, please help the change adapter

  I have Toshiba satellite A 505 S6989

  I accidentally deleted "Wireless Network Connection" icon of "changing the adapter setting" (network & sharing Center) while she was to allow...

  I have driver installed several times but he forces back...
  Also checked... but under the network adapter, Device Manager is showing only realtek ethernet... no wifi

  Please tell us how to get back this icon so that I can connect via wifi...

  Please answer as soon as possible
  concerning
  Afonso

  I solved the problem a few days before, sorry for the late response...

  WiFi card was detached from this place (it was a hardware issue)

  I opened my laptop and re placed this wifi card.

  now it works fine

  Thank you

• Please help, the TrojanSpy: Win32 / Delf was only PARTIALLY removed by the Microsoft Safety Scanner

  October 6, 2012

  Hi all!

  I ran the Scanner Microsoft (MSS) mode Quick Scan and it found nothing.

  I then ran MSS in full Scan mode and it found: TrojanSpy: Win32 / Delf

  In the results of Scan of MSS window, he says:

  "The analysis is completed with success and viruses, spyware and other potentially unwanted software were detected and partially removed".

  Given that the results showed the presence of "TrojanSpy: Win32 / Delf" I have four questions, please:

  (1) how do I get this Trojan horse on my computer? I am very sure and use a good anti-virus/malware software.

  (2) given that the results showed only partially removed SMS "TrojanSpy: Win32 / Delf", that the parts are on my computer?

  (3) how dangerous is the part or parts that remain on my computer that SSM has not deleted?

  (4) how to remove somewhere has been left more that SSM has not deleted?

  Thank you in advance for any help that anyone can give me.

  Sincerely,

  Traveler4God

  Hello

  Yes, it will remove the infection.

• Please help: the virtual disk parent has changed...

  After a few days of research about this error, I decided that I had to ask for some evidence of your experts to help me recover from this error.

  Thank you!

  It is a small desktop application:

  -Dell T410 esxi Server 5

  -a virtual machine, Windows Server 2003 with 2 discs, no fixed size

  I was help this office by managing services and updates on this Server 2003.  I ran updates on Friday and restarted.  When he came I open vSphere and found the virtual machine does not.  I tried to start it and got the error.  So, it seems I may have the CID issue that needs to be corrected.

  I don't have a direct access to this server so I'm remoting with RDS on 2003 VM server and vSphere on the esxi.  Did I make the right diagnosis and is it possible for me to make the necessary corrections to distance or I need direct access to the server?  Everything I've read has files of people editing CID numbers and it seems that they directly access the esxi server.

  Shows the data store:

  hard 'server '.

  hard 'server_1.

  'server' - 000001.vmdk

  "server_1" - 000001.vmdk

  'server' - snapshot1.vmsn

  I stuck a few newspapers below...

  DISC: Scsi0:0 [OPEN ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001.vmdk' persistent R]
  2012-08 - 05T 20: 00:06.022Z | VMX | DISKLIB-VMFS: ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001-delta.vmdk ': open with success (10) size = 5620404224, hd = 213826. Type 8
  2012-08 - 05T 20: 00:06.022Z | VMX | DISKLIB-DSCPTR: open [0]: "Server-000001 - delta.vmdk ' (0xa)
  2012-08 - 05T 20: 00:06.022Z | VMX | DISKLIB-LINK: open ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001.vmdk' (0xa): vmfsSparse, 35526656 sectors / 16.9 GB.
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-VMFS: ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-flat.vmdk ': open with success (14) size = 18189647872, hd = 181059. Type 3
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-DSCPTR: open [0]: 'server - flat hard' (0xe)
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-LINK: open ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server.vmdk' (0xe): vmfs, 35526656 sectors / 16.9 GB.
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB LINK: DiskLinkIsAttachPossible: incompatibility of the content ID (parentCID f72e60c7! = f05537b3) /vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001.vmdk vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server.vmdk.
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-STRING: ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server.vmdk ': cannot open (the virtual disk parent has changed since the child was created.) The content of the virtual disk ID parent does not match the ID of parent for children's content).
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-VMFS: ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001-delta.vmdk ': closed.
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-VMFS: ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-flat.vmdk ': closed.
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-LIB: can't open ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001.vmdk' with the virtual disk 0xa flags parent has changed since the child was created. The content of the virtual disk ID parent does not match the ID of parent for children (18) content.
  2012-08 - 05T 20: 00:06.035Z | VMX | DRIVE: Cannot open disk ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001.vmdk ': the virtual disk parent has changed since the child was created. The content of the virtual disk ID parent does not match the ID of parent for children (18) content.
  2012-08 - 05T 20: 00:06.035Z | VMX | Msg_Post: error
  2012-08 - 05T 20: 00:06.035Z | VMX | [msg.disk.noBackEnd] unable to open drive ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001.vmdk' or one of the snapshot disks it depends on.
  2012-08 - 05T 20: 00:06.035Z | VMX | [msg.disk.configureDiskError] reason: the virtual disk parent has changed since the child was created. The content of the virtual disk ID parent does not match the ID of parent matching the child content.
  2012-08 - 05T 20: 00:06.035Z | VMX |

  Thanks again for any direction you can provide!

  / r

  John

  The parentCID of the snapshot must match the CID from its parent, as shown in the log file

  "... The content ID mismatch (parentCID f72e60c7! = f05537b3)... »

  Server.VMDK

  CID = f05537b3
  parentCID = ffffffff

  Server - 000001.vmdk

  CID = a2b9ba8b
  parentCID = f72e60c7---> f05537b3

  Make sure you change the file on the host using the vi editor or - if you want to change the file in Windows - use an editor who is aware of the line breaks Unix (do not use Notepad!)

  Once this is done, I highly recommend that you take another cliché before you on the virtual computer. This prevents existing virtual disk files to be modified, so that you can return to this State where you need. After that everything works as expected, consider deleting all snapshots.

  André

• ISO Windows7 upgrade of my system XP... Please help the person not tech savy!

  I have 2 computers... one is a new laptop w / software advanced... the other is a hp tower that works under xp.  I searched for a trail version or a download of windows 7 or 8 if possible, but downloads only I've found require you to burn the files to a disk that I don't have the possibility to do so.  A 60 day trial version will do, but I can't locate a!  The Tower system is my husband, and he is absent until mid-May.  I need to make it until then... any advice/suggestions?  I would feel much safer if I need xp at least until mid-May.  I'm all thumbs when it comes to nothing technical.  Please, keep this in mind w / your answers!

  Unfortunately there is no trial version. If you want Windows 7 or 8, I'm afraid, you have to buy the operating system with a key Code. We can guide you in building a USB bootable for installing, but it is actually more difficult to burn a DVD to an .iso. I would also be sure that the material will actually in charge of Windows 7. Mania it on the end of XP support, it's just that... oversold. It is not something to be ignored, but if keep you a good antivirus, you should be OK for awhile (like 6 months to a year). XP actually has been precarious for some time now even with updates if you are at no more risk that you've visited for the last year or two and nothing terrible has happened, right?

• Please help, the printer does not have 'ink system failure '.

  Hello

  Any help appreciated.  My printer is printer all-in-one Photosmart C7280.

  2 days ago my printer has not worked. It comes with several error messages after I turn it on. The first is "ink system failure: ink system has failed." Cannot copy, receive faxes or print. Refer to the printer documentation. Error: 0xc19a0025. Turn off the power, then new. »

  However when I turn off and then again via the "power" button, I get a message saying "abnormal termination. Then the same error message original returns (0xc19a0025). It is the most common error and won't go away. Then too, I get a message saying "problem Photo tray: lift the output tray, check the photo tray is pushed up to the stop, lower output tray. Despite the fact that I haven't used the photo tray in several months and it is in the correct position.

  So far I tried to turn on the printer, shut down several times by using the power button. Also, I turned off the printer in making last night (after having been closed properly) and back on this morning. I looked through the documentation of the printer, but could not find tips for troubleshooting for this kind of problem. I updated the driver from HP using software update on my mac, and the problem is still there.

  Now I get desperate, I rely on my printer/scanner/copier a lot!

  Thank you

  Nathalie

  This widget could not be displayed.

• Please read, the issues of Windows Media Center EPG

  What is the current status of the problems with downloading the Guide EPG/program for Windows Media Center?

  I've heard from the right inside Microsoft person (who was on holidays) and he is now aware of the reported problem. It is transmission of information from here and connect to the team of the EPG.

• Design pen tool does not, please help the newbies!

  Hello

  I am very new in design, I'm working the pen tool, which has worked before when I was playing around with it on an earlier design, but I just downloaded the creative suite and when I use this design if I'm drawing a shape it creates black spots which first of all make it difficult to move to the next point Since it covers the image and then when I cut out the picture and paste in his party.

  You have a fill selected as a default, so when you create a form that's being filled with color. Before, you start to draw, the value none Fill and stroke a value as 1 point.

• Please help the gurus of the OFA - problem solved.

  I have a search page to buy order.when I click on go it displays all the in. the last column of the table results page's column (Details) of the image. When I click on this column of details, it should display the header information and po line.
  
  but I get the error message like "Houston-25043: InvalidParamException foreign key index 2 0 (key-value table) passed to the view object XxiiplPoDetailsExpVO1 findByKey" when I click on image for details.
  
  
  I created two vo
  XxiiplPoDetailsExpVO
  XxiiplPoLinessExpVO
  and the link display - XxiiplPoHeaderToLinesVL
  
  Details of init is written in AM.this method is invoked to processrequest plug by AM
  
  
  public void initDetails (String orderNumber)
  {
  OAViewObjectImpl vo = getXxiiplPoDetailsExpVO1();
  
  If (vo is nothing)
  {
  Tokens [] MessageToken = {new MessageToken ("Parameter", "XxiiplPoDetailsExpVO1")};
  throw new OAException ("AK", "FWK_TBX_OBJECT_NOT_FOUND", chips);
  }
  
  Convert the parameter of the string to a number.
  Number orderNum = null;
  
  Try
  {
  orderNum = new Number (orderNumber);
  }
  catch (Exception e) {}
  
  First of all, to build an oracle.jbo.Key object as required in the constructor of findByKey
  Javadoc. Then call findByKey indicating that we are looking for a single
  line. BC4J tries to find the entity this row in its cache and failing objects
  who will interview the database using the given key.
  
  Number of keys [] = {orderNum};
  Line lines [] = vo.findByKey (new Key (keys), 1);
  
  You must set the current line, or the details page will not display any
  data. When you explicitly query data, you don't have to do this
  because OA infrastructure automatically calls vo.first () in the
  results set, thus creating a current line.
  
  
  If ((lignes! = null) & & (rows.length > 0))
  {
  vo.setCurrentRow(rows[0]);
  }
  
  } / / end initDetails()
  
  Published by: [email protected] on April 21, 2009 12:47 AM
  
  Published by: [email protected] on April 21, 2009 12:49 AM
  
  Published by: [email protected] on April 21, 2009 01:33
  
  Published by: [email protected] on April 21, 2009 01:48
  
  Published by: [email protected] on April 21, 2009 01:52
  
  Published by: [email protected] on April 21, 2009 02:02

  Check the View object, how the attributes are defined as a key attribute?

  Causes of this error is.
  For example, assume that the View object cannot wait no more than one key to both parties, but the key passed in findByKey is a key to three parts. Then, this exception will be thrown.

  I suppose that you have set the key attribute earlier...

  Prasanna-

  Published by: HelloPrasanna on April 21, 2009 10:40

• HP envy m6 1105dx: Please help admin password required

  Required administrator password. entered the wrong code 3 times and now showing a code: 59587632. Please help the laptop is a hp envy m6 1105dx. Thank you

  Hello

  Enter: 46485214

  Kind regards

  DP - K

• I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• I forgot my secret question, answer and the second email but I have the password of my ID Apple and my phone number. I want to receive by email for my secret to my Apple ID issue because it is a gmail account. Please help me

  I forgot my secret question, answer and the second email but I have the password of my ID Apple and my phone number. I want to receive by email for my secret to my Apple ID issue because it is a gmail account. Please help me

  You have to ask Apple to reset your security questions. To do this, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  
  (139026)

• CODE 66 has when the update NET FRAMEWORK 4 with WINDOWS UPDATE can't update more far until the issue is resolved. Help, please... I almost tried everything.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  CODE 66 has when the update NET FRAMEWORK 4 with WINDOWS UPDATE can't update more far until the issue is resolved. Help, please... I almost tried everything. Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Take a look at this link and see if it helps-

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3adefda0-69f3-4075-96ee-e2c61bd599cc>