Boredom!

Similar Questions

• Disable or bypass boredom "Click to Play" FF 17-25

  The PTC 'feature' is in my opinion a bug. Under Linux, the latest Flashplayer is Flash Version: Adobe 11,2,202,297 said there will be no new version, only the security updates.

  So why am I said again and again that my plugins are precarious, so PTC disables the Flash on every site I visit and I have to click to read the content when Adobe says this is the last?

  I digress, that I ask the question more. I found a solution less than ideal. Install FF 16 or less than https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/

  Insecurity tell you, go away! Stop of holding my hand.

  It is ONLY my choice to get rid of the CTP. You want me to install a give fine, up-to-date version, me the ability to disable the CTP for Flash 11,2,202,297 on FF 17 ESR

  Go about: config and 'plugins.click_to_play' set to false

• Where are my apps? And authorization of boredom PC with new Apple ID?

  Last January, I've changed my AppleID to a new email address. But I think that Apple always thinks that I have an old email address.

  Then, I connected my iPhone to my laptop to back it up. I him have not done since the end of last year. When this happens, iTunes give me two choices: set up a new device or 2) restoring my backup, which was made last November.  I don't want I want for iTunes to recognize my new phone, but iTunes will not.

  I also noticed that even after the connection, apps only appear are those under my old name of e-mail. And when I click on the app, my email_ _old is referenced. But I've changed AppleID as shown above. (Also, when I try to allow the computer to my _new_ email, I get an error message saying authorization was not made.)

  Hi JacobianWife,

  I understand that you have a new iPhone, and you try to save up to iTunes on your PC.  However, I'm sure about your comment "I changed my Apple ID."   Do you mean you went on the appleid.apple.com site and edited your Apple ID existing, or that you mean that you have created a new Apple ID?   Looks like you have created a new Apple ID, and if this is the case, you will not be able to access any purchase you make on your old Apple ID.

  What I would say is to contact our Apple ID account security team so that they can help you straighten it.  Once you do, you will be able to re-download your past purchases, and to save your iPhone again use iCloud or iTunes.   I would add some general information for you below, but in your situation, I think that individual support with someone who can access your account would be the best course of action.

  Contact Apple for the Apple ID account security support

  Apple ID - Frequently asked Questions

  On your Apple ID email addresses

  Manage your Apple ID account information

  Take care

• Connection of boredom

  When I try to connect to my Skype id it says does not recognize us your Skype name
  But the Skype name is correct when I login through the web, it's login

  My Skype account was wired to the web, but it's not connection in applications

• Seen logging of boredom in the National Lottery - it says Safari cannot open the page

  Since Thursday, I seem to not be able to enter the site and it says that Safari cannot open the page

  Help please

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

• with boredom Watlow PM 485 modbus communication

  I have a PM Watlow I see now at MAX and using EZ area code can get info manufacture of.  I also uses the Modbus in the add-on on Saphire series tool to try to write or read anything from him (for the first time) and I always get an error of 'time' out of the slave.  I tried to make a simple reading of VISA I found on some positions, and I get the same timeout error.  It seems that if I try something Labview I get this error.  I even tried writing Hex to the thing with the same results.  Can anyone throw me a BONE?

  There are a couple of free libraries.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/201711

  https://decibel.NI.com/content/docs/doc-30140

• Boredom of pre-start to logon

  Thank you.

  Method 1 doesn't seem to be relevant, but method 2 is on the right track.  The solution was the Panel--> HP protect Tools Security Manager--> Administration--> administration Console--> security--> security pre-boot system increase (uncheck).  My ProBook now boots directly to the opening of session Windows 8, which is what I wanted.  "" It's a very steep learning curve, especially since "increase the security of the system" is a misnomer; It can actually decrease the security of the system!

  Thank you!

  Hello

  Thanks for posting in the HP Support forum.

  I appreciate your opinion on the pre-boot authentication.

  However, I am part of a security team at HP, and I kinda disagree. Preboot authentication PBA (and the whole disk encryption) is a sound method to increase the security of the given system (physical security mainly).

  A PBA environment serves as an extension of the boot (BIOS) firmware and guarantees a secure and inviolable environment external to the operating system as a reliable authentication layer. The PBA prevents any operating system from loading until the user has confirmed that it has the correct credentials to unlock the computer. That trusted layer eliminates the possibility that one of the millions of lines of code in the OS can jeopardize privacy staff or the company data.

  If you encrypted hard drive + pre-boot authentication, data are not accessible without authentication. However, if your computer's data is not encrypted and there is no ABP if your computer is stolen or if a well informed IT guy is present in front of the machine, then all of your data stored on the computer are vulnerable and can be access even if your Windows/Linux/Mac could have user account passowrd.

  If you want to discuss this, please do not hesitate to answer. I'd like to hear your opinion about it.

• Age of boredom III 3 Empires join online games.

  Hello!

  Me and my boyfriend me Age 3 for Christmas so that we can play together online. I installed the game fine and can connect and even chat to him, but when I try to join a game, he says that it is unable to connect.

  I helped him through my firewall, I tried to disable the firewall, I tried to disable the firewall of the router, I run as admin, in XP mode, I clicked on this thing that allows the age through the router and it still won't let me join the games.

  I tried to organize a game, but it can not connect to me. DirectX is up to date, and the game is patched. I play on Vista.

  I've seen tutorials on changing the port settings, but my screen doesn't match what was supposed to be there, so I'm not sure about this.

  We really want to play and the person who bought it for us is sad, that we cannot make it work. Any help on this would be much appreciated!

  EDIT: I tried the thing of port (following a full tutorial) and that didn't work. I tried to install it on my sister's laptop. It works under XP. He plays very well and she can join games. It is therefore my laptop...

  On my laptop the shortcuts do not appear on my desktop or even in my list of programs on the start menu. It seems that maybe it's a dodgy installation? But even uninstalling and reinstalling does not fix it.

  Hello!

  My boyfriend he works on XP but had to disable firewall on the router (I think) so it would allow him to play online. My sister, on xp in the same House as me, never had this problem.

  I have McAffee on my laptop but I have configured to allow age through and tried to disable both firewall and antivirus and test the game.

  I already checked and it is supposed to be compatible. I also tried to open these ports as the last link. =(

  I'm starting to think it's a bad installation. It will not add shortcuts to my office, nor it is listed in my startup programs menu, as it was when I tried it on my sister's cell phone (to ensure that discs were not fishy).

  EDIT: A friend suggested I check and see if I had installed the Service Pack 2 for Vista. I didn't do it! I was still on Service Pack 1. As soon as I put it on and reinstalled the game, it worked and everything is where it should be! He is still unable to join games most of the time, but I was a little and players can now find games I anime as well. I knew it would be something stupid, that I would have thought of the...

• Start pc wifi very good so he went arp cache is the help of boredom?

  Wirless turns off cant get on the internet cache arp slaughter it. unloaded history and cookies?

  Hello

  Maybe this can help, http://support.microsoft.com/kb/314067

• Boredom incompatible signature in Web/apps sites?

  I need help because I'm unable to sign into things on my mobile, such as Skype and checkoutsmart. the problem sometimes with applications, sometimes with Web sites. I am 100% sure that the passwords that I entered are correct - I tried it on my laptop and even had the password resets, then copied and pasta, but it wont let me connect.

  It's very inconsistent, for example the same password works on the Skype app but it does not work if I try and sign up for the Skype Web site - but then, if I have the same password on the same test site on my laptop it works.

  I checked I am up to date with the latest version of the software, I even deleted and reinstalled the applications affected, provided the case of passwords is right, most of the more obvious and normal to try things.

  However, none of these fixes worked. I'm still not 100% sure it was the phone, but I had no such problems until I started using the handset and I don't know what it could be - if anyone has any advice, I would be happy!

  start the safe mode and see if you are able to connect on these applications

  How to start safe mode.
  http://talk.sonymobile.com/T5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008

• Configuration of remote VPN on 2811 boredom

  I try to configure VPN remote access for customers, but could not connect remotely using Cisco VPN client.  This is the current configuration on the router.  I think I'm almost there and may miss a few commands.  Thank you very much for the research.

  Current configuration: 4758 bytes

  !

  version 12.4

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  encryption password service

  !

  FCC-1811-router host name

  !

  boot-start-marker

  boot-end-marker

  !

  enable secret 5 XXXX

  !

  AAA new-model

  !

  AAA authentication login vpnauthen local

  AAA authorization vpnauthor LAN

  !

  AAA - the id of the joint session

  !

  IP cef

  No dhcp use connected vrf ip

  DHCP excluded-address IP 10.35.5.1 10.35.5.49

  DHCP excluded-address IP 10.35.5.100 10.35.5.254

  DHCP excluded-address IP 10.35.10.1 10.35.10.9

  !

  FCC-Admin dhcp IP pool

  import all

  Network 10.35.5.0 255.255.255.0

  router by default - 10.35.5.1

  !

  pool IP dhcp FCC comments

  import all

  Network 10.35.10.0 255.255.255.0

  router by default - 10.35.10.1

  !

  IP domain name faithcountrychapel.net

  inspect the IP router-traffic tcp name FW

  inspect the IP router traffic udp name FW

  inspect the IP router traffic icmp name FW

  inspect the IP dns name FW

  inspect the name FW ftp IP

  inspect the name FW tftp IP

  property intellectual auth-proxy max-nodata-& 3

  property intellectual admission max-nodata-& 3

  !

  voice-card 0

  No dspfarm

  !

  username secret privilege 15 5 XXXX XXXX

  username secret privilege 15 5 XXXX XXXX

  username secret privilege 15 5 XXXX XXXX

  !

  crypto ISAKMP policy 10

  BA 3des

  preshared authentication

  Group 2

  !

  Configuration group customer isakmp crypto FCCVPN

  key XXXX

  pool vpnpool

  !

  Crypto ipsec transform-set esp-3des esp-md5-hmac vpnset

  !

  Crypto-map dynamic dynmap 10

  Set transform-set vpnset

  !

  card crypto client vpnmap of authentication list vpnauthen

  card crypto isakmp authorization list vpnauthor vpnmap

  client configuration address card crypto vpnmap answer

  vpnmap 10 card crypto ipsec-isakmp dynamic dynmap

  !

  interface Loopback0

  IP 172.16.1.1 255.255.255.240

  !

  interface FastEthernet0/0

  DHCP IP address

  IP access-group ENTERING

  NAT outside IP

  inspect the FW on IP

  no ip virtual-reassembly

  automatic duplex

  automatic speed

  No cdp enable

  vpnmap card crypto

  !

  interface FastEthernet0/1

  no ip address

  automatic duplex

  automatic speed

  No cdp enable

  !

  interface FastEthernet0/1.1

  encapsulation dot1Q 1 native

  IP 10.35.1.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  !

  interface FastEthernet0/1.5

  encapsulation dot1Q 5

  IP 10.35.5.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  !

  interface FastEthernet0/1.10

  encapsulation dot1Q 10

  IP 10.35.10.1 255.255.255.0

  IP access-group 100 to

  IP nat inside

  IP virtual-reassembly

  !

  IP local pool vpnpool 10.35.5.200 10.35.5.254

  no ip forward-Protocol nd

  IP http server

  no ip http secure server

  overload of IP nat inside source list NAT interface FastEthernet0/0

  !

  IP extended INBOUND access list

  permit any any icmp echo response

  allow all all unreachable icmp

  allow icmp all once exceed

  permit tcp any any eq 22

  allow tcp any a Workbench

  allowed UDP any eq field all

  allow udp any eq bootps any eq bootpc

  NAT extended IP access list

  IP 10.35.5.0 allow 0.0.0.255 any

  IP 10.35.10.0 allow 0.0.0.255 any

  !

  access-list 100 permit udp any eq bootpc host 255.255.255.255 eq bootps

  access-list 100 permit udp host 0.0.0.0 eq bootpc host 10.35.5.1 eq bootps

  access-list 100 permit udp 10.35.10.0 0.0.0.255 eq bootpc host 10.35.5.1 eq bootps

  access-list 100 deny tcp 10.35.10.0 0.0.0.255 any eq telnet

  access-list 100 deny ip 10.35.10.0 0.0.0.255 10.35.5.0 0.0.0.255

  access-list 100 deny ip 10.35.10.0 0.0.0.255 10.35.1.0 0.0.0.255

  access ip-list 100 permit a whole

  !

  control plan

  !

  Line con 0

  password 7 XXXX

  line to 0

  line vty 0 4

  transport input telnet ssh

  line vty 5 15

  transport input telnet ssh

  !

  Scheduler allocate 20000 1000

  !

  end

  It should probably add this to your INBOUND acl

  allow udp any any eq isakmp

  permit any any eq 4500 udp

  allow an esp

• Ensure unlock boredom (feature request)

  Hi all

  When I turn on the secure release device, looks like I still have to "drag up" and then enter the pin code. I think that step "drag up" here is a little redundant.

  Thank you!

  This problem has been resolved with update 1.3.1.  When the phone is locked and switched back. The lock screen appears immediately (no necessary sliding).

• "images are not a recognized format" boredom

  a previous post - 2013 - illuminated the problem.

  I'm having issues importing still images in a sequence of time in photoshop and would appreciate suggestions!

  I want to create a time using a sequence of photographs.  All file names are in name order / numbered.

  I use the workspace of proposal and followed all the instructions available.

  • Create correct size document (film and video).
  • Create a video montage.
  • Pace of game.
  • Choose 'create new video layer from file '.
  • Point to the first image in the folder where the pictures are stored.

  At this point, no matter what I tried, I get this error:

  

  end of the previous post.

  I have the same problem and it is extremely frustrating because I have to export via LR6 thousands of images as tif files in a different folder, because; file, new layer of the file (in ch cc) does NOT RECOGNIZE on my photoshop jpeg files.

  He acknowledges that tif files?

  I tried stuarts how to use file, layer, new layer of the file instead, and although it seems to work it doesn't matter all files? When I try and export the video, the work area is stuck at 0-59

  and Yes, all my images are renamed and numbered sequentially.

  I don't understand what setting may need to be changed to allow it to load all images. can there be something in the preferences which addressed this?

  My ps cc created vids mp4 perfectly to the exported JPEGs LR, tiff (in thousands at the time) files but does not load JPEG files, I get this msg:

  "Unable to complete the new video layer from file because the film is not a recognized format"

  Thanks for any help with this annoyance "footage is an unrecognized format.

  TWS

  Have you seen Julianne Kost on Lynda.com tutorial?  I think it's free show without subscription Lynda.

  Photoshop CC Essential Training (2015)

  If this does not give you the answer, come back and I'm sure someone here can give you more specific advice.

  [EDIT]  I just saw the other thread that you hit.  As you say, that is three years old, and things are different with new versions of Photoshop, so the question is, which version do you use?  If you have a version of CS6 pre, then maybe something like Quicktime Pro could be better.  You mentioned the proposal workspace, so I think that you have the latest version, in which case that old thread is probably more relevant.

• Publication of boredom

  I went thru all the parameters required by our LMS and when I publish, I get an error 'cannot delete the folder "my folder name".  When I go to this place, there is an empty folder.  I looked through the issues in the community and there was another person who get the same error, but nobody has an answer.  Any ideas of what is happening or what I should do to move forward?

  Very strange the first time I hear such a question (and I've posted thousands of responses on this forum).

• ASUS x 99 Deluxe boredom?

  Bought an Asus X 99 Rampage V of Micro Center at a discount steep. Doesn't have all the features of the Rampage, but they gave me a lot of things. The jury had a flaw, so I returned it. I traded for X 99 Deluxe from the comments here. Now that I have it, I read about the horrible problems with this card on Amazon and Newegg.

  Are those who use this edge of the problems? No POST and instability seem to be a common denominator. IM thinking to return it. Do not not a bad future headache.

  FWIW, MicroCenter people were very helpful and courteous.

  Keep in mind many people buy parts from Newegg and post in your comments have no real idea of this material, they should get with some planks or platforms and how to configure them properly. Probably, they do not know how to isolate problems real and just declare it as questions of the Commission. We used the Deluxe series, since it was released and have had no known problems with this model beyond the failure rate standard for boards. There are just a few considerations when buying hardware with this Commission and the configuration of the bios.

  Eric

  ADK