Please help with the batch processing of Javascript.

Similar Questions

• Please help with the problems of Vista SP2

  So I spent all day on the forums here and I'm head over heels.  I had problems with Windows update and some other problems on my Dell Studio XPS.  It is a tower with double HDs in RAID mirror running Vista 64-bit with SP2.

  I got it for 3 years and I thought that I clean and correct certain defects to go back to the original Dell factory condition.  That did not fix the update install problem I did cleaning.  Now it's worse.

  I'm trying to install SP2 and get a catastrophic failure 0x8000ffff error-UNEXPECTED

  The onlychange is that several months ago, one of my WD 640 GB drives factory failed and I replaced it with a Seagate Barracuda 1 TB since I couldn't find a 640 GB drive.

  I tried to stop and restart all services BITS, etc. no luck.

  I tried to run among the MS FixIt for the problem of update, but it fails because it says that it cannot initialize the powershell.

  Help, please... I'm hopelessly lost and can not spend more money on this thing.

  Thank you!

  If you need additional help with the clean install, please start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and independent (i.e., not a BigBoxStore or a Geek Squad) computer repair shop & ask them to do the job.

• Need help with the batch file command - move all files/folders

  I need help creating a simple batch file that performs the following operations:

  Move all files AND folders in a source folder to a target folder. The source folder will be mklinked with the target folder and an infinite loop can be possible, not sure if any order would be necessary here to avoid this? Executed once A thing, or a thing to stop?

  It comes to free up space on an SSD by iTunes forced location for backups and apps to be physically on another HARD drive, but available as if it were in default location.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Please help with the problem of deployment OTA

  Hello

  I'm trying to deploy my application (for the first time) using a live approach.

  First of all, let me mention that I developed this application using the BB for Eclipse plugin.  It generated files jad and cod.

  I have 5 files of cod and jad for the application, all in a directory on a web server. Apache has been set with the necessary MIME types for jad and cod files.  When I use the browser on the BB to access the jad file, your browser correctly displays the name, Version, vendor, etc. of my application.  But then he said:

  This application requires the following modules, which are not installed:
  {followed by a list of my other 4 modules}

  This is obviously a true statement, but I thought that the jad would cause the BB get these other modules and install them automatically.  It would really suck if my customers had to manually install each of the 5 modules.

  It is therefore possible for the other 4 modules loading is automatic, and how I have to happen?

  Moreover, my OS is 4.2 and my application is written for this OS.

  Thank you
  Paul

  See if this helps:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=25327&query.ID=11...

• Please help with the problem of Validation

  Recent changes: Yes, had to replace the hard drive of my laptop (I had three years and more)

  When error: when I copy the code returned by the validation tool

  What tool: GenuineCheck.exe (downloaded from http://www.microsoft.com/en-us/download/exe-validation.aspx)

  Windows Update stopped working, too.

  You will appreciate the help.

  RP3456

  Separated by the moderator of this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/validation-tool-gave-me-this-answer/e51e7172-5bc8-42AE-AAB5-7f3c2fc0a166#LastReply

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Please help with the DNS problem in VMware Workstation 6.0.2

  I have 3 servers Configuration of VMware Workstation. There are a the Ethernet parameters ' host only: a private netwrok shared with the host country. The problem is I have a server configured as a main domain controller, I can join my other two servers to the domain very well, I can ping by name, but none NSLOOKUP. Basically I have a DNS issue that I MUST correct.

  Anyone know what could be the problem? Or where to look? I attach a doc with my settings.

  Thanks in advance.

  Have you checked that the clients are configured to register in DNS?

  Have you checked the the event log for entries regarding a DNS record failed?

  Did you check that there is a records for each host in the appropriate DNS zone?

  The clients have the right DNS server configured?

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

  Published by AWo

• Please help with the installation of flash... :)

  Hey there im im sorry to add the number of people who are trying to get their flash player works, ive read a fair few discussions now and nothing seems to work as well now ive wat some of you more advanced posters have noticed and opened my own discussion, any input would be great.

  he tries to update, you

  up to now im getting no videos, games or anything that uses flash.

  on youtube (I use flash more for really) sound telling me that I need to update adobe flash, so I followed suit and used the Manager of d/l adobe trying to install flash 10, 1 couple of times it says has failed the verification of integrity, but then installed (or told me he had), although nothing had changed. I looked at the adobe help, got the uninstall application, follow the restrted instructions and tried again... nothing, tried to remove the flag thing in the registry... nothing, has also deleted all my software antivirus and anti-spam apps and installed avg d/led only retried the d/l Manager adobe said once again, she had and nothing... any ideas guy? Here are my specs also

  THAT IS TO SAY 8

  win xp HE

  antivirus - AVG FREE

  anything else you need to know?

  Again any help would be greatly appreciated

  Thank you

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  00zigzag wrote:

  FlashUtil10h_ActiveX.dll version 10.1.53.21

  That explains it - you must have installed version 10.1 beta at some point and not properly uninstalled.

  Download the program uninstaller 10.1 from http://labs.adobe.com/downloads/flashplayer10.html, then follow the instructions in http://labs.adobe.com/technologies/flashplayer10/releasenotes.pdf on how to run the uninstall program with the -force option.

• Please help with the extended search and replace

  Thanks in advance to dedicate time to help.

  Why does this work?

  Find: jpg ">"

  "Replace: jpg" alt = "" >

  Parameters:

  Current document

  Text (Advanced)

  Inside of the tag (img selected) and I tried to not inside tag

  All the option boxes unchecked

  Click on replace all

  And nothing is found or replaced but there are many of them.

  I live and die by that in Homesite then please help me understand this so I must not have market Homesite too. I like it very much because such simple things makes me batty.

  You do this in the following parameters:

  Parameters:

  Current document

  Source code (and not text)

  Inside of the tag (img selected) and I tried to not inside tag

  All the option boxes unchecked

  Kind regards

  Vinay

• Please help with the correct color settings

  I use ID CC depending on which we, my printers want my final PDF either as PDF/x-1a (I know it does with regard to Flattening) or PDF/x-4.

  I need all color images for close to CMYK, no matter what they were when placed. I need all 100 %K black to stay like this and not to convert an intense black.

  Currently, my document color settings are:

  Parameters: general use of 2 North America

  Workspaces:

  RGB: sRGB IE61966 - 2.1

  CMYK U.S. Web Coated (SWOP) v2

  Color management policies:

  RGB: Preserve embedded profiles

  CMYK: Preserve numbers (ignore linked profiles)

  Conversion options:

  Engine: Adobe (ACE)

  Intent: Relative Colorimetry

  I use the default settings for PDF/x-1's or PDF/x-4 (most have the ink Manager to convert all tasks to deal with) and and always receive a yellow warning with the following in general warning triangle:

  The preset specifies source profiles that do not match the current color settings file. Profiles specified by the color settings file will be used.

  What should I check in my document color settings to avoid this error message (the resulting files do appear to be OK for what I need, I want to just make sure that I put it just in case this error). Of course, other thoughts are always appreciated also.

  What should my document color settings also if the final document will be black and white (in grayscale) and contains only data on the black plate?

  Sorry to contradict the Peter a bit here, but X - 4 allows to RGB, rather than to specify it, so you can have your PDF by setting 'Convert to Destination (preserve numbers)' with an appropriate destination CMYK profile and still conform to the standard X-4.

  That's what I'm doing here, because I prefer the Adobe CMM performs the conversion.

• help with the login process completed Windows error

  One of my friends has a laptop that suddenly began to the old "Stop."
  c000021a {fatal system error}. The Windows Logon Process System completed
  quit unexpectedly with status f 0xc0000135 (0x00000000 0x00000000). The
  system has halted.

  Using BartPE I managed to run Dr. Watson according to them here:
  http://support.Microsoft.com/kb/156669

  The problem is that even after having no start nothing happened that
  error, so I can't look at the Dr. Watson log!
  It's the same thing in Mode safe mode and last known good configuration.

  I am now currently looking (using a Linux Live CD) for "winlogon" see if
  who is corrupt, and he found FOUR different - a
  in system32, one in servicepackfiles\i386, in $Ntservicepackuninstall$
  and the other to Softwaredistribution\download\cf (a lot of numbers)

  The situation is complicated by the fact that the Windows XP Home CD of
  That has been installed has disappeared in a move, and I have XP
  CD Pro.

  Is there anyway I can repair a XP Home using a CD XP Pro installation?
  Is it possible to repair this without a Cd XP Home at all?
  If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

  AVG 8 intercepts not non-viral malware, which can be just as destructive as the virus. As probably a disk upgrade XP Home retail has been used to install XP on the laptop of Win2k, you will need to use a XP Home retail disk, not a professional one.

  By doing a simple Google search for "doing a repair install using i386", I found this link that may be useful:

  http://www.howtohaven.com/system/createwindowssetupdisk.shtml

  I didn't do this, have a good store of various types of XP installation disks so YMMV. MS - MVP - Elephant Boy computers - don't panic!

• Please help with the problem of driver SAS S10 6483

  I'm going crazy and I hope someone here can help.

  I am trying to load Windows 7 on a 6483 S10 which has a SAS hard drive.

  During installation, the system does not see the drive and ask for a driver.

  I can't find a SAS driver for windos 7 anywhere.

  Can someone help me understand this?

  Thank you!

  Bill

  Thanks, Erik

  It turns out that when I opened the box, it doesn't have a SAS drive, as I said.

  She and its a SATA drive or the computer is defective. IF its of not coming back.

  I was also told that Windows 7 will not work with it that seems hard to believe.

  I was led on a chase of wild goose by the seller.

  Thanks for your help.

• Impossible to uninstall or disable the drivers wanminport and unexpected with the network adapter. Please help with the best solutions.

  Dear friends,

  Have you encountered a problem like this is Nati sp1 or sp2, currently when I get problem like that I solve (we run system restore or Startup Repair last option: reinstall the operating system)

  symptoms: System very slow and unable to boot or just freezes on the Welcome screen, or sometimes not even vista starts in safe mode or safe mode command prompt.
  I tried the next option, this has worked for me in some cases. but not many times.

  I open a command prompt terminal high, do you it by logging in as an administrator as launching the cmd.exe as an administrator (right click, run as administrator). Then type the following command that uninstalls the device said:

  netcfg EI u ms_sstpminiport

  want to know is there permanent fix or patches for this problem and why this is happening only in vista. I also had windows 7 and xp sp3. I had no problems in that.

  Kind regards

  King of the computer

  See if the following Help article: http://www.vistax64.com/tutorials/171469-uninstall-device-device-driver.html.

  If this does not work, download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and go to the tab all. See if you can find the place where the device (or at least the driver) is loading and uncheck to stop to happen.  Click OK and exit, and reboot and see if the problem persists.  It cannot remove the device or the driver, but if he let them go then the problem is solved until we can find a way to remove actually - hopefully without needing a repair system/upgrade or a clean installation.

  I hope this helps.  I would like to know how it works.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• can anyone help? a friend has forgoton the password on windows 7 ultimate can you please help with the password

  Have a computer laptop windows 7, but the password does not work and I cannot start the computer before opening the window

  Forgotten password:

  You can try a number of things, please see the following articles:

  http://www.howtogeek.com/HOWTO/Windows-Vista/enable-the-hidden-administrator-account-on-Windows-Vista/

  Or:

  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  Credit: Ronnie Vernon MVP

  If you have an installation of Windows 7 disk, see the following article.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account

  Unfortunately, beyond that we can not help you. Please review the following policies for these forums and Microsoft.

  Answers Support Forums password policy

  Keep secure passwords - Microsoft strategy on move the passwords

  Microsoft's official policy

  Microsoft's strategy concerning lost or forgotten passwords

• Help with the application process

  I create a process like that, and it doesn't work. Can someone help me check what is the problem?
  
  declare
  number of l_counter;
  Start
  owa_util.mime_header ("text/xml", FALSE ");
  HTP.p ('Cache-Control: non-cache');
  HTP.p ('Pragma: non-cache');
  owa_util.http_header_close;
  HTP. PRN (' < select > < option value = "" >--select 2 results - </option > ');
  for rec in select (separate OUT2
  output
  where OUT1 =: V_OUT1 and OUT2 is not null
  order by the OID);
  l_counter: = 0;
  loop
  If REC OUT2 = "other - specify" then
  l_counter: = 1;
  on the other
  HTP. PRN ("< option value ="' | rec. OUT2 |) '">' || recomm. OUT2. ("< / option >");
  end if;
  end loop;
  If l_counter = 1 then
  HTP. PRN ('< option value = "other - specify" >' |) "Other - specify ' | ' < / option >");
  end if;
  HTP. PRN ("</select > '");
  end;
  
  Thank you
  Jen
  
  Published by: Jen Hu on July 12, 2012 11:29

  You had a semicolon after the beginning of the LOOP. You don't need this l_counter: = 0. Here is the code again.

  DECLARE
     l_counter   NUMBER := 0;
  BEGIN
     OWA_UTIL.mime_header ('text/xml', FALSE);
     HTP.p ('Cache-Control: no-cache');
     HTP.p ('Pragma: no-cache');
     OWA_UTIL.http_header_close;
     HTP.prn ('- Select Outcomes 2 -');
  
     FOR rec IN (SELECT DISTINCT out2
                            FROM OUT
                           WHERE out1 = :v_out1 AND out2 IS NOT NULL
                        ORDER BY OID)
     LOOP
        IF rec.out2 = "Other - specify"
        THEN
           l_counter := 1;
        ELSE
           HTP.prn ('' || rec.out2
                    || ''
                   );
        END IF;
     END LOOP;
  
     IF l_counter = 1
     THEN
        HTP.prn (   ''
                 || 'Other - specify'
                 || ''
                );
     END IF;
  
     HTP.prn ('');
  END;
  

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Apress.com/9781430235125
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• I'm new to Muse - please help with the following

  A tutorial on Muse I saw recent a wensite called http://www.millicareglg.com and I love their front page and I'm wanting to create the movement you see on the left side. I'm not a technical web designer so I have no idea of the correct jargon to use sorry. I assume these are scroll bars?  How can I create them on my site home page please? Their menu is positioned at the bottom two and appears on scroll on someone can help to know how you achieve this action please?

  I'm not copying their website just inspired by it thank you.

  Hi Robyn,

  This motion/animation created in Adobe Edge on the left side. You can create this animation in adobe Edge and insert it on your site of muse.

  See you soon!

  Aish