Please help with the correct color settings

Similar Questions

• help choose the correct color settings

  Hello everyone, its been a long time that I installed Photoshop and do not remember the appropriate parameters for the work in Photoshop CS6.  I had a problem with my computer and had to reinstall and now my mind is a blank. I tried browsing here and on the net and came up with a large number of ions of conflict.  I know I have to use Adobe 1998, but alternatives escape me. I do know that if I should change the gray space, I was told to use gray gamma 2.2. I don't know if I should Desaturate monitor 20% etc.

  What conversion options? What should those be?  And what about the advanced controls and what must be those defined for better photographic needs.

  I hope that's not too redundant, if it has already please send me to her.

  Judging by your screenshot I guess you run Photoshop on a PC and I hesitate to make any recommendation beyond the ones I listed. I think that. other than the installer, I suggested, all of the default settings are a safe bet.

  If my answer your request solved the problem, you can mark the correct answer. Thank you.         normftb

• Please help with the problems of Vista SP2

  So I spent all day on the forums here and I'm head over heels.  I had problems with Windows update and some other problems on my Dell Studio XPS.  It is a tower with double HDs in RAID mirror running Vista 64-bit with SP2.

  I got it for 3 years and I thought that I clean and correct certain defects to go back to the original Dell factory condition.  That did not fix the update install problem I did cleaning.  Now it's worse.

  I'm trying to install SP2 and get a catastrophic failure 0x8000ffff error-UNEXPECTED

  The onlychange is that several months ago, one of my WD 640 GB drives factory failed and I replaced it with a Seagate Barracuda 1 TB since I couldn't find a 640 GB drive.

  I tried to stop and restart all services BITS, etc. no luck.

  I tried to run among the MS FixIt for the problem of update, but it fails because it says that it cannot initialize the powershell.

  Help, please... I'm hopelessly lost and can not spend more money on this thing.

  Thank you!

  If you need additional help with the clean install, please start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and independent (i.e., not a BigBoxStore or a Geek Squad) computer repair shop & ask them to do the job.

• HP 4320 s replace HDD--> DDD, help with the correct choice please

  Hi all

  I want to replace my 250 GB HARD drive on some of the SDS, what type of disc that I'm looking for? What will be the best sollution for 120 and 250 GB have? I really don't know anything about the types of connectors and other "serial sata" that means anyone can get listed something? I read that there are series of SDS 330 from Intel that match? Looking for connectors SATA 3 or 6 GB?

  Thanks for understanding noob

  Here is the Service Manual:

  Manual

  See Page 73. The hard drive in this one is a little harder to get to than your average laptop, so be careful.

  It's a standard thickness of 2.5 inches wide of 9.5 mm SATA. You can use any 2.5 inch wide 9.5 or 7 mm thick SSD. I recommend the Samsung 840 Evo:

  Here's the 120 gig for about $85 and there are links to all available sizes.

  http://www.Newegg.com/product/product.aspx?item=9SIA29P1EC5421&cm_re=samsung_840_evo_ssd-_-20-147-247-_-product

  Your interface is SATA 2 3gbps, but don't sweat it... 6Gbps SATA-3 discs downclock of will and work very well. There is very little difference in the real world real performance betweeen the two interfaces. Buy, install and enjoy. If you need assistance with the resettlement/migration software we can help there, too.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Please help with a correct use of the "snapshot" function

  Hello

  I have recently updated to Pro - 9 11-Pro.

  With the 9-Pro version, I could take a snapshop of a portion of a page in a PDF doc and paste it elsewhere in the same doc (another page), or a different PDF doc.

  I just don't seem to be able to do the same thing with 11-Pro.  I don't know that there is a way.

  All your comments/opinions will be appreciated.

  Thank you

  pflor

  Hmm... I can take the snapshot with Acrobat 9, but stick that this does not work for me, as you describe. I can only paste like a stamp with the help of the: Tools > comment & markup > places the picture on the Clipboard as stamp tool

  In Acrobat 11, this tool is available under: comment > Annotations > add stamp [tool] > Place the Image on the Clipboard as stamp tool

• Please help with the DNS problem in VMware Workstation 6.0.2

  I have 3 servers Configuration of VMware Workstation. There are a the Ethernet parameters ' host only: a private netwrok shared with the host country. The problem is I have a server configured as a main domain controller, I can join my other two servers to the domain very well, I can ping by name, but none NSLOOKUP. Basically I have a DNS issue that I MUST correct.

  Anyone know what could be the problem? Or where to look? I attach a doc with my settings.

  Thanks in advance.

  Have you checked that the clients are configured to register in DNS?

  Have you checked the the event log for entries regarding a DNS record failed?

  Did you check that there is a records for each host in the appropriate DNS zone?

  The clients have the right DNS server configured?

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

  Published by AWo

• Please help with the problem of deployment OTA

  Hello

  I'm trying to deploy my application (for the first time) using a live approach.

  First of all, let me mention that I developed this application using the BB for Eclipse plugin.  It generated files jad and cod.

  I have 5 files of cod and jad for the application, all in a directory on a web server. Apache has been set with the necessary MIME types for jad and cod files.  When I use the browser on the BB to access the jad file, your browser correctly displays the name, Version, vendor, etc. of my application.  But then he said:

  This application requires the following modules, which are not installed:
  {followed by a list of my other 4 modules}

  This is obviously a true statement, but I thought that the jad would cause the BB get these other modules and install them automatically.  It would really suck if my customers had to manually install each of the 5 modules.

  It is therefore possible for the other 4 modules loading is automatic, and how I have to happen?

  Moreover, my OS is 4.2 and my application is written for this OS.

  Thank you
  Paul

  See if this helps:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=25327&query.ID=11...

• I'm new to Muse - please help with the following

  A tutorial on Muse I saw recent a wensite called http://www.millicareglg.com and I love their front page and I'm wanting to create the movement you see on the left side. I'm not a technical web designer so I have no idea of the correct jargon to use sorry. I assume these are scroll bars?  How can I create them on my site home page please? Their menu is positioned at the bottom two and appears on scroll on someone can help to know how you achieve this action please?

  I'm not copying their website just inspired by it thank you.

  Hi Robyn,

  This motion/animation created in Adobe Edge on the left side. You can create this animation in adobe Edge and insert it on your site of muse.

  See you soon!

  Aish

• Please help with the problem of Validation

  Recent changes: Yes, had to replace the hard drive of my laptop (I had three years and more)

  When error: when I copy the code returned by the validation tool

  What tool: GenuineCheck.exe (downloaded from http://www.microsoft.com/en-us/download/exe-validation.aspx)

  Windows Update stopped working, too.

  You will appreciate the help.

  RP3456

  Separated by the moderator of this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/validation-tool-gave-me-this-answer/e51e7172-5bc8-42AE-AAB5-7f3c2fc0a166#LastReply

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• So I need a little help with the Flash colors

  I always use the red, green and blue gradient colors Flash below for metal stuff, but how do I get the effect of this red color in different colors like yellow?

  If you want to use predefined gradients, what you could do is the first color any field you want with one of them, and then select the fill and use the color Panel to replace the Red some other color you prefer.   If you have never worked with the degraded section of the color Panel, you will be probably it find a bettter tool to create and fine-tune transitions.

  

  You just doubleclick, this little red square in the lower left and it opens a color sample as you have demonstrated to select another color

• Please help with the installation of flash... :)

  Hey there im im sorry to add the number of people who are trying to get their flash player works, ive read a fair few discussions now and nothing seems to work as well now ive wat some of you more advanced posters have noticed and opened my own discussion, any input would be great.

  he tries to update, you

  up to now im getting no videos, games or anything that uses flash.

  on youtube (I use flash more for really) sound telling me that I need to update adobe flash, so I followed suit and used the Manager of d/l adobe trying to install flash 10, 1 couple of times it says has failed the verification of integrity, but then installed (or told me he had), although nothing had changed. I looked at the adobe help, got the uninstall application, follow the restrted instructions and tried again... nothing, tried to remove the flag thing in the registry... nothing, has also deleted all my software antivirus and anti-spam apps and installed avg d/led only retried the d/l Manager adobe said once again, she had and nothing... any ideas guy? Here are my specs also

  THAT IS TO SAY 8

  win xp HE

  antivirus - AVG FREE

  anything else you need to know?

  Again any help would be greatly appreciated

  Thank you

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  00zigzag wrote:

  FlashUtil10h_ActiveX.dll version 10.1.53.21

  That explains it - you must have installed version 10.1 beta at some point and not properly uninstalled.

  Download the program uninstaller 10.1 from http://labs.adobe.com/downloads/flashplayer10.html, then follow the instructions in http://labs.adobe.com/technologies/flashplayer10/releasenotes.pdf on how to run the uninstall program with the -force option.

• Please help with the extended search and replace

  Thanks in advance to dedicate time to help.

  Why does this work?

  Find: jpg ">"

  "Replace: jpg" alt = "" >

  Parameters:

  Current document

  Text (Advanced)

  Inside of the tag (img selected) and I tried to not inside tag

  All the option boxes unchecked

  Click on replace all

  And nothing is found or replaced but there are many of them.

  I live and die by that in Homesite then please help me understand this so I must not have market Homesite too. I like it very much because such simple things makes me batty.

  You do this in the following parameters:

  Parameters:

  Current document

  Source code (and not text)

  Inside of the tag (img selected) and I tried to not inside tag

  All the option boxes unchecked

  Kind regards

  Vinay

• Please help with the problem of driver SAS S10 6483

  I'm going crazy and I hope someone here can help.

  I am trying to load Windows 7 on a 6483 S10 which has a SAS hard drive.

  During installation, the system does not see the drive and ask for a driver.

  I can't find a SAS driver for windos 7 anywhere.

  Can someone help me understand this?

  Thank you!

  Bill

  Thanks, Erik

  It turns out that when I opened the box, it doesn't have a SAS drive, as I said.

  She and its a SATA drive or the computer is defective. IF its of not coming back.

  I was also told that Windows 7 will not work with it that seems hard to believe.

  I was led on a chase of wild goose by the seller.

  Thanks for your help.

• Impossible to uninstall or disable the drivers wanminport and unexpected with the network adapter. Please help with the best solutions.

  Dear friends,

  Have you encountered a problem like this is Nati sp1 or sp2, currently when I get problem like that I solve (we run system restore or Startup Repair last option: reinstall the operating system)

  symptoms: System very slow and unable to boot or just freezes on the Welcome screen, or sometimes not even vista starts in safe mode or safe mode command prompt.
  I tried the next option, this has worked for me in some cases. but not many times.

  I open a command prompt terminal high, do you it by logging in as an administrator as launching the cmd.exe as an administrator (right click, run as administrator). Then type the following command that uninstalls the device said:

  netcfg EI u ms_sstpminiport

  want to know is there permanent fix or patches for this problem and why this is happening only in vista. I also had windows 7 and xp sp3. I had no problems in that.

  Kind regards

  King of the computer

  See if the following Help article: http://www.vistax64.com/tutorials/171469-uninstall-device-device-driver.html.

  If this does not work, download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and go to the tab all. See if you can find the place where the device (or at least the driver) is loading and uncheck to stop to happen.  Click OK and exit, and reboot and see if the problem persists.  It cannot remove the device or the driver, but if he let them go then the problem is solved until we can find a way to remove actually - hopefully without needing a repair system/upgrade or a clean installation.

  I hope this helps.  I would like to know how it works.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• can anyone help? a friend has forgoton the password on windows 7 ultimate can you please help with the password

  Have a computer laptop windows 7, but the password does not work and I cannot start the computer before opening the window

  Forgotten password:

  You can try a number of things, please see the following articles:

  http://www.howtogeek.com/HOWTO/Windows-Vista/enable-the-hidden-administrator-account-on-Windows-Vista/

  Or:

  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  Credit: Ronnie Vernon MVP

  If you have an installation of Windows 7 disk, see the following article.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account

  Unfortunately, beyond that we can not help you. Please review the following policies for these forums and Microsoft.

  Answers Support Forums password policy

  Keep secure passwords - Microsoft strategy on move the passwords

  Microsoft's official policy

  Microsoft's strategy concerning lost or forgotten passwords