Please share your failure on suggestion

Similar Questions

• Please share your entries on Eg1 and Eg2 dependence of voice messaging port to be hardware based or can be added on a basis of carta ala?

  Hello

  Please share your entries on Eg1 and Eg2 dependence of voice messaging port to be hardware based or can be added on a basis of carta ala?

  1 pls correct if wrong, the number of voicemail ports depends on which model of supported connection of the unit hardware is selected. In addition, the number of voice messaging ports cannot be added as a carta ala and it comes with the hardware.

  Eg1; with the unit Connection8.6 on MCS7845 standalone server would support 250 voicemail ports and if the connection of the unit is used in active-active mode then total 500 voicemail ports would be available with the cluster of connection of the unit.

  Eg2; On a platform of the UCS, the UCS C210 M2 Server connection unit 8.6 with capacity of 10,000 EGGS of voicemail, the voicemail ports would be available:

  (i.) the limits of stand-alone Configuration:

  • 150 ports G.711 and G.729a (combined TUI, VUI or TTS)
  • 35 ports iLBC or G.722

  (ii) limits for the active/active Cluster Configuration:

  • 300 ports G.711 and G.729a (combined TUI, VUI or TTS)
  • 70 ports iLBC or G.722

  (iii) EGGS during model for the Connection8.6 with 10000 EGGS Voicemail capacity 300 GB HARD drive unit is installed on UCS C210 M2 server, he would in his own assign vCPU = 4, RAM = 6 GB, vHDD = 300 GB 150 ports of voicemail and.

  If more than 150 voicemail ports are necessary, then we can have the Connection8.6 of the unit using the active/active mode, then 300 voicemail ports would be available.

  However, if the number of necessary voicemail ports is more than 300, then need to install, Connection8.6 20 000 unit model voicemail OVA on UCS C210 M2 Server capacity. This model has according to the capacity of voice messaging port:

  Stand-alone Configuration limits:

  • 250 ports G.711 and G.729a (combined TUI, VUI or TTS)
  • 60 ports iLBC or G.722

  Limits for the active/active Cluster Configuration:

  • 500 ports G.711 and G.729a (combined TUI, VUI or TTS)
  • iLBC 120 ports or G.722

  Concerning

  Sumit

  There is a hardware support and licensing aspect for the number of ports.  From a support perspective, the number of ports is limited by the physical server hardware (e.g., platform) or virtual resources (i.e., as specified in the files of EGGS).  However, the number of ports, you can configure is also based on how many ports you are licensed for the.  For example, you can have a server that can support 250 ports but if your license file contains only 16 ports then you will only be able to configure 16 ports on the system.  I have a scenario where a customer needed to add more ports; However, I don't think it would be a problem.

  When you talk about port capacities for the connection of the unit, I would recommend that you focus more on the ability of the server port unique compared to the ability of the cluster for normal operations.  Connection of the unit is designed as a cluster in active / active in the intention to provide 100% failover of services if a server is offline.  The recommended design is that the Subscriber must manage all calls with the possibility of overflow to the transformation Editor.  IOW, if you want to support 500 simultaneous calls on a consistent basis but each server is capable of supporting 250 ports on its own then only a failure of a server would immediately block 50% of services.

  Hailey

  Please note the useful messages!

• Please share your information needs of medianet.

  You deploy a medianet? Please share all your information needs for the deployment of technologies medianet and solutions here. Also share any comments you have on the Medianet Knowledge Base Portal.

  Hi clavoy,

  I have problem to access the content from the portal of the Base - links do not work.

  Chris

• Hyperlinks in ebooks in CS5.5 - Please share your info

  I would like to make a suggestion.  Maybe this will help developers.

  It seems that some of us have no problem with internal hypertext links in ebooks, and others - which makes me wonder if it is something to do with the individual systems.  I would ask all who have exported to EPUB with CS5.5 to leave an answer to these questions, if you have had problems or not.  Perhaps one of our permanent experts might suggest other issues.

  (By "internal links" I mean a link that goes to another location in the document, and not a URL on the internet.)

  1 internal hyperlinks work when you export a book in epub format?

  2 internal hyperlinks work when you export a single document to EPUB?

  3. are you using a Mac or a PC?

  4. what operating system do you use?

  5. any other input you feel may be useful.

  Somehow, we need to get this figured out!

  Thanks for your comments.

  With the greatest respect to Gabriel, this problem was not fixed in 5.5.  I have the same problem.  Yes, hyperlinks work very well in a document unique epub, but they do not work correctly in the books.

  You'll find you need to export the entire book to an epub, then unpack it with 7zip, correct the hyperlinks and he rezip.  You must know HTML to do this.

  According to other messages that I read on this forum, InDesign leaves out a part of the code when exporting a book.

  I found this post here somewhere, but I can't remember where:

  "Wherever you see a place the name of the file that you are linking the reference in front of her. If you link the chapter title for an item in the table of contents, and the name of file for Chapter 1 is 1.xhtml chapter, this: .  You must do this to each cross-reference.

  I hope this helps.  It's a real pain, but it seems to be the only answer.

  Good luck.

• Anyone run a Terminal servers virtual with VMware ESXi 3.5 If Yes please share your experiences?

  Hello guys,.

  We are runnig Terminal Server with Windows Server 2003 Ent in a cluster environment (TS 7), we plan to go with VMware ESXi 3.5 to virtualize the TS. Does anyone have any kind of experiences that can help make a decision?

  Thank you.

  Keep an eye on the side esxtop ESX and see your % RDY meters in this output.  Don't forget, as underlined chamon, with high vSMP values do not match always the best performance.  Typical scenarios citrix/ts use 1-2 vCPU for more effective results.  If you bump up to a larger number of users, you also want to watch the overcommitt on your processors and vCPUs in the box.  Many users a lot of switching and use heavy context on the processors for the management of the OS and the user.  1-2 vCPU seems to be the sweet spot.  What kind of applications are underway within the environment?

  -KjB

  VMware vExpert

• Facebook registration without phone verification? PLS, share your ideas.

  In facebook registration, how to avoid phone verification using the captcha code. are there solutions to avoid phone verification? Please, share your ideas. forward

  Thanks advanced

  This has nothing to do with Windows.

• vamicli update - check: failure: obvious editing error analysis.  Please contact your dealer.

  To better understand the process of update, I built two versions of my virtual device.  I installed the one 'old' and I'm doing it to check updates.  When I check for updates (with the web interface or the vamicli interface, below), I get the same error:

  vamicli update - check failure began: obvious editing error analysis.  Please contact your dealer.

  Now, I kind of cheated on the repository.  On my VMware Studio camera, I use the web server integrated and created a directory in/opt/vmware/www/ISV to use as a custodian, because I'm just trying to test such things out in my lab.

  Having done this, I can see in the newspapers of apache2 on my VMware Studio device it is manifest, indeed, read (I turned on the access_log):

  10.86.150.84---19/Aug/2010:18:50:35 + 0000-"GET /ISV/repository/manifest/manifest-latest.xml HTTP/1.1" 200 66821

  The build process had no problem putting a bunch of files in the repository, and it seems that the 'old' device becomes the file downloaded correctly.

  But he doesn't seem to like the file...

  Other things to note: I'm doing this in a laboratory without access to the internet and if no proxy either.  I was wondering if there were files that had to be pulled from the internet open to allow analysis to what appears to be the python .xml, but through some hacks that I don't even want to discuss, I do not see any other access on the web of the device when it tries to check the updates.

  I tried to strace the vamicli-update, but... There are a lot of things out there, and I can't find clearly something wrong.  Missing a lot of things, but the actual analysis (if it is really what is a failure) is far from clear.

  I found where the error message comes (with ropes), it's:

  libcmpiVAMI_Update_Provider.so

  which is not a surprise.  I can't find the source for this anywhere on the VMware Web site, so I don't know exactly what goes wrong.

  It is difficult for me to believe that he is really a parse error - somehow, I imagine that something in the environment is simply not true and that is causing the parser does not properly or maybe he failed even to the analysis.

  But if anyone has some answers (or ideas of what to try next), I would of course like to hear.  Thank you!

  The list of RPM packages installed in the virtual machine is analyzed once the build is complete, then the manifest is generated from that.  In this way, all additional packages which is drawn in ISO, etc. are included.

  -Matt

• How can I stop it please you do not share your location. Share your location to provide research that is nearest Noailles you

  When I go to this site it gives me this

  You do not share your location. Share your location to provide research that is nearest Noailles you

  This opens up how can I stop it there ' has NO x

  Thank you

  Hello Cointech, I think that you clicked on the "never share location" button on the site and that's why you get only now this popup. You can change this by right-clicking on the page and then go to see information page > permissions and set the access to your site to always ask.

• Windows error has encountered a critical problem and will restart automaticlaly in one minute. Please save your work now, when you try to install Microsoft Security Essential

  Original title: pc restart continually saying met windows critical problem after installing microsoft security databases

  Had problems with windows firewall and Defender does not.  Removed protector virus blank media like this firewall did not work either. Tried the Fix 4 her.  Still would not work.  Then tried to install Microsoft Security Essentials.  Rang scan and it restarted the pc and I am now in a loop that says "Windows has encountered a critical problem and will restart automaticlaly in one minute. Please save your work now. "Then, it closed its doors, restarts and the same message appears.  A also say-connected on the internet also. Help please...

  Hello

  1. who were the fix - it, you've tried?

  2. were you able to successfully install other programs on your computer before this problem?

  3. What is the error you received when the Windows Firewall and defender did not work on your computer?

  4. you have made no changes to the computer before this problem?

  First of all, you must disable the auto reboot system error and then we can check if the problem exists in safe mode or not.

  Method 1.

  Step 1. Disable automatic reboot to avoid unwanted restarts on system failure.

  a. when your computer starts up keep press F8 on your keyboard until you get the Advanced Boot Options screen.
  b. now, use the arrow keys, select Disable automatic restart in case of system error and press ENTER.

  Step 2:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 3:

  If the computer works properly in safe mode, then you can perform a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 2:

  You can try to uninstall completely, and then re - install Microsoft Security Essentials and check.

  You can run the fix - it from the link next.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 3:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Note: All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.

  Post back with the results for you help more.

• Please help, I've updated my iPad has a few days, but by exploring my camera I discovered that the front camera did not work while the main or back camera is not working properly, please, anyone with a secure solution please share.  Thank you

  I have tried everything that I could even, to the extent where I hard reset my device, but that it does not work, no possible solution please share with me, that I will accept it gladly. Thanks in advance.

  Already restore you factory? If this is not the case, try this. If you have, or it did not help the cause can be hardware partner. Take it to your local Genius Bar or Apple authorized service provider. -AJ

• buy an iphone 5s by amazon and I came with iCloud blocked an account... {I called the seller and does not that I do that I'm from Venezuela please need your help}

  buy an iphone 5s by amazon and I came with iCloud blocked an account... I called the seller and does not that I do that I'm from Venezuela please need your help

  No one here can help you. The device is locked activation. Since you have made the purchase by Amazon, you can check with them to see if they will stand behind it. No one on the forum, or Apple can help you remove the lock. Only the previous owner can do this. I suggest that you demand a refund, so let's start a claim with Amazon about this dealer.

• How can I get the amount of free disk space using the space using windows 7 Please share example using GetDiskSpace

  How can I get the amount of disk space by using windows 7 Please share example using GetDiskSpace I already studied http://digital.ni.com/public.nsf/allkb/9958B8E473C4EF1786256BBC0053B64F

  Reading your question a little more in detail, I doubt if you are using the Win32 GetDiskFreeSpace API function (including my previous post is the solution) of the function GetDiskSpace from the Toolbox of the programmer.

  With respect to the other, it works even with capacity greater than 2 GB disks, but you must use the appropriate formatting code to display the returned value. I updated my example to display the total of free space in the debug output window and added a comparison with the value of 3 GB using UInt64TypeCompareUInt box to tools programming interface.

• HP Officejet Pro 8610: hp officejet 8610 printer error "Please stop your printer, and then click.

  When I turn on my HP Officejet Pro 8610 - it goes through its cycle - once it ends the initialization of the startup LCD flashes a Blue Screen of Death with B8931C7C for less than a second, then the screen shows printer error "Please stop your printer, and then click.

  I've tried so far, I've tried it unpluggin at the back, wait 15 seconds and 60 seconds.  Also this operation and in him plugging in several power strips and directly into the wall outlet.

  I was able to restore the default settings at one time.  This questions has gradually deteriorated to the point that wow its very pretty in a loop without end with failure - consistantly crashing after start up - please advise.

  Hi @mrberad,

  Welcome to the Forums of HP Support!

  I understand that your printer HP Officejet Pro 8610 is stuck in an error state. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can see how frustrating, it would be for you. The error you receive is usually related to a general printer error, sometimes leading to a hardware problem.

  I take a flashlight and look inside the obstruction.

  Use this guide to check obstructions:

  • Displays a Message 'Transport Jam'

  I see that you reset the default printer. Have you tried a reset complete semi? I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  If you have completed all the above steps and your product still has a problem, service the product.

  If the printer is buyer's remorse period, you can take that back at the point of sale or contact HP.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Error: "this operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. »

  Original title: Operation canceled

  When you click on a hyperlink in an e-mail message, I get this Message: "this operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. "I get this message every time I try to use the hyperlink. I am the administrator on this computer. How can I disable this feature so that I have activate hyperlinks?

  Hi Evon1,

  1. What mail client do you use?

  2. you remember to make changes to the computer, after which the issue started?

  If you use Internet Explorer, then, I suggest to make Internet Explorer as the default browser and check if it helps:

  Change the web browser by default

  In addition, you can have a look on the link of the article following if you are using Microsoft Office Outlook:

  You receive an error message when you click a hyperlink in Outlook

  I hope this helps.

• Impossible to uninstall a program; error message: sorry you do not have the right permissions tocomplete this action. Please contact your administrator on this computer to continue

  I downloaded a program on the internet, but now when im trying to uninstall it is showing this error message: cannot uninstall a program. error message: sorry you do not have the right permissions tocomplete this action. Please contact your administrator on this computer to continue. What should I do please help.

  Hello

  you tell us the name of the program

  go to the website of manufacturers of programs and to find a way to uninstall

  or try this free program for her

  http://www.revouninstaller.com/

  and it is a program 'downloaded a program from the internet' search for malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.