Plextor model # PX - W2410A CD writer.

Similar Questions

• Change Print/sort order of audits using model

  I work to finalize the model to check XML Writer and hit a good.
  
  
  Is it possible to change the sort order of how the audit would print of in the model?
  
  If we were able to do that I could finish with the customizations, we currently have in place for our advice XML repository.
  
  
  I need the sort order is the following: Mailstop (segment1), family name and first name.
  
  Is it possible to do it at all?
  
  Thanks for the tips.
  
  G

  1. try to do it in the db itself.
  2. If this is not possible, then specify the sort order in RTF as

  
  -Do not know if its Varchar or the number. Change the type of data accordingly
  
  

  Check if the performance is not affected by this.

• WHEA-Logger 17 error in the system event log

  I would like clarification on the specific error that is listed in my system with high frequency event log; I don't know if it is a hardware or software problem.

  My system specs are:

  Windows 7 64 bit
  Motherboard ASRock X 58 extreme LGA 1366 Intel X 58 ATX Intel
  SAPPHIRE Vapor - X 100269-2GVXL Radeon HD 4890 2 GB 256 - bit GDDR5 PCI Express 2.0 x 16 HDCP Ready CrossFire
  Western Digital Caviar Black WD1001FALS 1 TB 7200 RPM / MIN SATA 3.0 Gb/s 3.5 "internal hard drives
  PLEXTOR 24 X DVD/CD Writer black SATA model PX-880SA LightScribe Support
  Crucial 6 GB (3 x 2 GB) 240 - Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Triple Channel Desktop memory Kit
  Intel Core i7 920 Nehalem 2.66GHz LGA 1366 130W Quad-Core Processor Model BX80601920

  I've updated the BIOS with the latest version, 1.40, and have the latest Intel Chipset drivers.
  Measures to take for troubleshooting:

  (1) uninstalled and reinstalled drivers Chipset Intel
  (2) uninstalled and reinstalled the ATI drivers
  (3) Ran Memtest and can't find any errors
  (4) update BIOS
  (5) reinstall the ATI video card
  (6) uninstalled and reinstalled 0 x 8086: 0x340a in Device Manager
  (7) searched the forums and cannot find a solution.

  Description:
  A corrected hardware error occurred.

  Component: PCI Express Root Port
  Source of the error: Advanced Error Reporting (PCI Express)

  Bus: Device: function: 0 x 0:3:0 x 0 x 0
  Vendor ID: Device ID: 0 x 8086: 0x340a
  Class code: 0 x 30400

  Any suggestions as to the cause of the warning and the solution would be greatly appreciated.

  I think that you should make no decision until after 22nt Oct. No one wants to "Miss the bus." Your hardware manufacturer will attempt to get on the same page.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Unable to respond to emails in Mail 9.3

  I use a MacPro, retina, 13 inches, early 2015 running OSX El Capitan v 10.11.4.

  In 9.3 Mail I receive all messages normally but when I select "Reply" or "Reply All" I am presented with a small model which is devoid of any detail (no names, previous message etc.)-just a blank new message template. I can't do anything with this model - I can't write to it, I can't delete it – nothing.  All I can do is minimize to the dock.  So I have to close completely - re - open - and, with luck, he erased.  The strange thing is that sometimes, everything works fine.

  Other forums have proposed to delete ' user > library > Preferences > com.apple.mail.plist' but is not present in El Capitan.

  Any ideas anyone?

  Try to remove the... mail - shared.plist

• Satellite Pro L20 goes wrong with i.f. audio Fast Track USB

  Hello!

  I used my Fast Track USB on new Toshiba Satellite L40 and I never had any problems with it. I could put a low latency and I did a few songs with him.

  Yesterday, I bought another laptop, thinking of recording studio at home. He used the Toshiba Satellite Pro L20. It does not work with my interface. When I listen to music on Winamp or anything on Fruity Loops, I hear strong clicks, pop, noise. They introduce samples, or they appear during playback, or after a sample is stopped.

  I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba more? The only chipset drivers are old, and you can download em only from site Web from Toshiba. The chipset is ATI Xpress 200 M. Its pilots are with the graphics card. Recently I noticed that you can download "ATI Catalyst Legacy Display Driver for Windows XP - card mother/IGP Drivers 9.11" and CRACK to make it possible to install on a mobile device like the L20. Yep it's funny, but its impossible to do otherwise!

  things that I have tried and they have still not help:
  replacement of drivers #, original were released in 2004. I installed the version.
  driver settings #, low latency, high latency
  # asio and different settings
  pluging # USB interface to another.
  # try what happens when I use the battery and when to use the adapter
  # update BIOS
  # off units such as wifi, card sound card on board
  # checked IRQ list

  persistent organic pollutants will always appear.

  my config:

  Toshiba Satellite Pro L20
  Win XP Home SP3
  Celeron M 1, 5 GHz
  896 MB of ram
  M - Audio Fast Track USB, drivers: 6.0.2

  Kind regards

  Initially, I wonder that you use old notebook L20 now. You have no more L40?

  You must understand that the Satellite Pro L20 is older model laptop and also not the best choice for such operations. This laptop is probably designed for simpler day-to-day operations such as the internet, e-mail, office, a little bit of multimedia and that s all the.

  I don't mean good old classic doesn't work with your external device, but you will be lucky if someone has the same external device and the same model of laptop and write about their own experiences.

  Do you use factory settings or you have installed the own operating system?

• Need new disc for my Satellite P20 S203

  Hello

  My carpet * an optical drive UJ - 811b has stopped working, and I want to buy a new drive for my Satellite P20 S203.
  But this time I would like to have a drive that reads and writes DVD + not only DVD, as did so the UJ - 811b.

  Which drive with these features fit in my satellite p20?
  UJ - 820B don't? Or if you know other model or brand, please write a reply.

  Thank you

  Post edited by: virelai

  Hello

  You need to buy a compatible player!
  Not all slim drives are compatible due to different master slave / parameters c - salt!

  Generally, your user manual must contain a list of compatible drives.
  If you have no user manual to use this device, then you can download it here:
  http://EU.computers.Toshiba-Europe.com/-> support downloads & -> Toshiba operating manual

  Here, you have to choose Archive as first option!

  On the other hand, you could get in touch with a local ASP from Toshiba.
  Guys might provide a good information on the supported disc!

• Satellite L500-1 - where to find the drivers for XP and Windows 7?

  For me, are necessary for the driver to L500-1. On a site not found. If it is a good idea to use the driver other model of what to write.

  To me, the driver under Windows XP, Windows 7.

  Hello

  I searched a bit on the Toshiba site and it seems that your model is part of the PSLJTE series and as a result, you can download all the drivers for XP and Windows 7 here:

  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  Laptop > Satellite > Satellite L Series > Satellite L500 > PSLJTE

  Check this box!

• How can I retrieve the execution of TestStand 4.0 Test results in a c sharp Application?

  I am writing a c sharp application to launch a test sequence in TestStand 4.0.1 and then collect the results of the tests to update our own screens / report (s).  I'll need some sort of recursive routine to collect the following information (if available) for each stage: name, result, Min value, Max Value, measured value, units.

  My attempts have been to an event to end execution allows to collect data:

  void EndExecution (sender As object, EndExecutionEvent ev)
  {
  Results PropertyObject = ev.exec.ResultObject.GetPropertyObject ("ResultList", 0);

  int numContainers = Results.GetNumElements ();

  for (int i = 0; i)< numcontainers;="">
  {
  PropertyObject resultData = results. GetPropertyObjectByOffset (i, 0);
  String testResult = resultData.GetValString ("Status", 0). ToString();

  PropertyObject testStep = resultData.GetPropertyObject ("TS", 0);
  Dim testName = testStep.GetValString ("StepName", 0). ToString();

  MessageBox.Show (i.ToString () + "". "") testName + "=" + testResult);
  }
  }

  But this only gives me MainSequence data.

  How to cross the ResultsList tree to access the results of all the test steps?

  tlaford,

  There are a couple of big problems with what you are doing:

  (1) it is best to call the code from a test report of the result of your sequence treatment reminder (just use an action step) or change the process template to call your code rather than to call for EndExecutionEventHandler of the user interface, because if you use Test DUT and then there is a separate resultlist by USE not by execution, and it is generally processed at the end of each use not at the end of execution. If you use the EndExecutionEventHandler then you should NOT use the process templates provided with TestStand because they don't work that way. Instead, you just run your sequences without a process template. Although I really recommend the path of process model, even if you write your own a custom, because it is more flexible, and then hardcode your treatment result in the user interface as you do. A few reasons why a process model is that more flexible or better are that it will work in any user interface, including the sequence editor (no changes to the user interface is needed), and it can do everything you can do in a sequence, for example to call a code module in any language supported , asynchronous sequences, call sous-séquences, etc.

  2 recursion) through each property at such a low level is bad because the names of the properties are not guaranteed to be unique for what you expect them to be. Anyone can write their own types step custom with some result properties that they would like. You must make sure that the full path to the properties is what you expect it, and you can even check that the type of step is one you expect. You should rather loop through the result of higher level items ONLY and are looking for the complete data lookupstrings that you expect from these elements. For example, instead of WalkTree you might have the following instead:

  This must be called from a step in a test recall report or in a custom process template
  rather than from EndExecutionEventHandler of the user interface, because if you use Test DUT then
  There is a separate resultlist by USE, not by execution, and it is usually processed
  at the end of each use not at the end of execution.
  Sub ProcessResultList (PropertyObject resultList)
  {
  	numElements int = resultList.GetNumElements ();
  	< numelements;="">
  	{
  		Element PropertyObject = resultList.GetPropertyObjectByOffset (i, 0);
  		String stepTypeName = string. Empty;
  If (point. There are ("TS. ((StepType', 0))
  			stepTypeName = GetValString ("TS. (StepType", 0);
  If (stepTypeName is "NumericLimitTest")
  		{
  			If (point. Exists ("Limits.High", 0))
  			{
  				 Double highLimit = item. GetValNumber ("Limits.High", 0);
  				 Do something with the value
  			}
  		}

  NOTE: The two step type SequenceCall and NI_Wait can have subresults like that. A stage of waiting waiting on an asynchronous thread or the execution will have this.
  If (point. There are ("TS. ((SequenceCall.ResultList', 0))
  {
  Recurse for results call sequence.
  PropertyObject sequenceCallResultList = item. GetPropertyObject ("TS. (SequenceCall.ResultList', 0);
  ProcessResultList (sequenceCallResultList);
  }
  }
  }

  Hope this helps to clear things up,

  -Doug

• Error 7 with Report Generation Toolkit

  Hi all

  I am trying to generate an Excel sheet report for some readings using the "Generation of reports toolkit", but when you try to generate the report, the code generation report part is executed and gives Error (7) and there is no report is generated.

  The Code I use is attached in the following link:

  https://www.dropbox.com/s/9n4brimucsd0xts/report%20Generation.rar

  Can I get help please?

  Thanks in advance

  I could download and open your compressed file.  I unpacked it in a folder.

  There are many features that lead me to ask "you try to learn LabVIEW on your own, without a mentor and training and orientation?  Here are some of the things that I noticed:

  • Although a generation of .lvproj, .aliases and .lvlps project, open file reports, was empty!  Because projects have been added for LabVIEW, almost all development should be done in a project, but you don't seem to do.
  • You have an event loop (good) to manage the keys Start, Stop and report.  But instead of using Boolean control with a property and using an event "Changed value" latch, you use switch to published (which, so far, I've never used) and a mouse down event.  I guess this could work, but I've never seen this model.
  • You write an Excel report, but do not use the Excel-specific screws (for example Excel easy table).  Why or why not?  The basic idea of an Excel report, is that you create 2D text data, you want to write in Excel, then with a few simple screws, you open Excel, write the Table, and then save the report.  In particular, you do not write something that resembles the columns and rows on a worksheet (Date, time, Test, etc.).

  Now to your specific questions, error 7.  Do you know what means this error?  If you click Help, choose error explain, and set 7, you will see that it means "file not found".  Well, there is a place prominent where a file is used, just at the start of your program.  I recommend that you put a probe (do you know probes?) or an indicator on the way past in the hand for a loop and see what file you are trying to open (hint - there is an error in the way you build the path, but you should be able to understand how to fix it).

  Good luck.  Hope these suggestions you get on a better path.

• Generation of signals (c) FIFO PXI-6225

  Hello.

  My user requests an upgrade a system existing.

  I'm an analog input I need to convert to a digital waveform. As the analog input varies, I need to be able to vary the frequency of the digital wave to match. Just recently, I discovered that I should probably use a line in Port 0 on my PXI-6225. I tried using digital model Generator.VI and writes the result to a Write.VI DAQmx. I wish that some checks before I'll and rewire my material that I'm on the right track.

  Thanx.

  Hi Bill,

  So it seems that you need to output a pulse train that changes frequency proportional to the voltage of your analog input (or proportional to an input of pulse train).  If this is the case then the best way to do it is actually NOT with correlated digital i/o but rather with one edge counters.  He would use the PFI lines rather than port 0.

  I would like to start by this example that shows how to change the frequency of an output of TTL meter on the fly:

  Output frequency of meter to change on the fly

  You can read your task of entry in the same line as the generation (or you can try instead an architecture of producer/consumer ).  I hope this helps, let me know if you have any questions!

  Best regards

• Intel pro /100ve has stopped working

  I did a system restore to a date before the problem occurred and still have the problem. Uninstalled Norton and all its components. Uninstall the NETWORK card and the restarted family Vista drivers added premium map NETWORK driver loaded, download and install the latest generic driver from Intel. no joy.

  Connected to the DSL modem via an old Netgear 10meg switch and now I am able to get online.

  Anyone have it please any ideas on how to resolve the situation? (Sux Skype at 10 M)

  Thank you.

  Intel(r) PRO/100 VE Network Connection *.

  ------------------------------------------------------------------------------

  * PCI * bus PCI 1 location, device 8, function 0

  * Identification device *.

  * Vendor ID * 32902

  * Device ID * 10204

  * Class device *.

  * Class code * 2

  * Under the class Code * 0

  * API * 0

  * PCI Config space fields *.

  * PCI Vendor ID * 0 x 8086

  * PCI device ID * 0x27DC

  * IDS revision * 0x01

  * API * 0x00

  * Void / register class * 0x00

  Class registry * 0x02

  * Vendor Id Registry Sub * 0x103C

  * Registry of subsystem Id * 0x2A5E

  * PCI interrupt line * 0 x 14

  * Interrupt Pin * 0 x 01

  * Windows Properties *.

  * Key Windows driver * {4d36e972-e325-11ce-bfc1-08002be10318} \0004

  * Manufacturer * Intel

  * Windows hardware ID * PCI VEN_8086 & DEV_27DC & SUBSYS_2A5E103C & REV_01, PCI VEN_8086 & DEV_27DC & SUBSYS_2A5E103C, PCI VEN_8086 & DEV_27DC & CC_020000, PCI VEN_8086 & DEV_27DC & CC_0200

  * Resources information *.

  * Resources o * I / O Port: 0xEE00h - 0xEE3Fh

  * Memory resources * memory: 0xFDEFE000h - 0xFDEFEFFFh

  * IRQ resources * interrupt: 20 (shareable) (level of triggers)

  * Driver information *.

  *Driver*c:\Windows\System32\drivers\e100b325.sys

  * Driver provider * Intel

  * Driver version * 8.0.47.0, 06/12/2007

  * Name of the peripheral system * \Device\ {06716FCC-CC85-4757-8535-0AF7693186EC}

  * Physical * unknown physical media

  * Connected adapter * true

  * Condition * available and able to send and receive data

  * MAC address * 00: 1B: fc:d1:c8:f6

  * IP address * 192.168.1.67

  * IP mask * 255.255.255.0

  * Adapter Index * 11

  * Gateway IP address * 192.168.1.254

  * DHCP server * 192.168.1.254

  * A DHCP Server * true

  * Have WINS * false

  * Adapter Type * ETHERNET

  * Adapter DHCP enabled * true

  * Adapter MTU * 1.46 Ko

  * Speed * 10.00Mbps

  Wednesday, May 22, 2013 10:37:56

  ------------------------------------------------------------------------------

  * Information model *.

  ------------------------------------------------------------------------------

  Model name * a6120n

  * Product number * GC670AA-ABA

  * Build software * 73NAv3PrA1

  * Serial number *[personal information]

  ------------------------------------------------------------------------------

  * Information system *.

  ------------------------------------------------------------------------------

  * Manufacturer * HP-Pavilion

  Total number of logical CPUS * 2

  Total physical memory * 2.00 GB

  Total number of optical drives * 1

  Total number of disks hard * 1

  Total number of video cards * 1

  Total number of Modules of memory * 2

  Total number of DIMM slots * 4

  ------------------------------------------------------------------------------

  * Motherboard *.

  ------------------------------------------------------------------------------

  * System Board * Chipset * Intel i945G/GS/P/PL

  * Southbridge * Intel 82801GH (ICH7DH)

  Board basis * manufacturer * ASUSTek Computer Inc.

  * Product * Leonite2

  * BIOS * seller * Phoenix Technologies, LTD

  * Release date * 27/07/2007

  * String of Version of the BIOS * 5.21

  * Size of ROM * 512,00 kB

  * Intel (R) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz CPU:0 * Specification * Intel (R) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz

  * Speed * 2.00 GHz

  * Size * 64,00 KB

  * Size * 2.00 MB

  * Intel (R) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz CPU:1 * Specification * Intel (R) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz

  * Speed * 2.00 GHz

  * Size * 64,00 KB

  * Size * 2.00 MB

  ------------------------------------------------------------------------------

  * Memory *.

  ------------------------------------------------------------------------------

  * System memory * total physical memory * 2.00 GB

  * Free physical memory * 1.03 GB

  * Page File * c:\pagefile.sys

  * Size of the Page file * 2.28 GB

  * 1024Mo (666 MHz) DDR2-SDRAM * memory size * 1.00 GB

  * Type of memory * DDR2-SDRAM (666 MHz)

  * Manufacturer of memory * Hyundai Electronics

  * Date of manufacture memory * week 41, year 2007

  * Memory part number * HYMP512U64CP8-Y5

  * 1024Mo (666 MHz) DDR2-SDRAM * memory size * 1.00 GB

  * Type of memory * DDR2-SDRAM (666 MHz)

  * Manufacturer of memory * Hyundai Electronics

  * Date of manufacture memory * week 41, year 2007

  * Memory part number * HYMP512U64CP8-Y5

  ------------------------------------------------------------------------------

  * Local disk *.

  ------------------------------------------------------------------------------

  * SAMSUNG HD320KJ * model number * SAMSUNG HD320KJ

  * Serial number *[personal information]

  * Firmware revision * CP100-10

  Total capacity * GB 298,09

  Buffer of size * 8.00 MB

  * Temperature * 27 c

  * Controller * Master

  *Driver*c:\windows\system32\drivers\disk.sys

  * Driver version * 6.0.6002.18005, 21/06/2006

  * HP - C: * drive letter * C

  * Name volume * HP

  * Volume serial number *[personal information]

  * File system * NTFS

  * Capacity volume * 289,26 GB

  * Free space on volume * 204,06 GB

  * Space used volume * GB 85.20

  * Recovery - D: * drive letter * D

  * Name volume * recovery

  * Volume serial number *[personal information]

  * File system * NTFS

  * Capacity volume * 8.83 GB

  * Free space on volume * 1.01 GB

  * Space used volume * 7.82 GB

  ------------------------------------------------------------------------------

  * CD-ROM Drive *.

  ------------------------------------------------------------------------------

  * CD/DVGW TSSTcorp TS-H653L * model number * TSSTcorpCD/DVGW-TS-H653L

  * Serial number * Firmware[personal information]

  * Firmware revision * 0514

  * Controller * slave

  * Drive letter * E

  * Readable * CD-ROM, CD - R, CD - RW, DVD-ROM, DVD-RAM, DVD-R, DVD - RW, DVD + R, DVD + RW, DVD + R DL

  * Writable support * CD - R, CD - RW, DVD-RAM, DVD-R, DVD - RW, DVD-R DL, DVD + R, DVD + RW, DVD + R DL

  Write strategies * TAO, SAO, RAW, RAW - MS

  *Driver*c:\windows\system32\drivers\cdrom.sys

  * Driver version * 6.0.6002.18005, 21/06/2006

  ------------------------------------------------------------------------------

  * Display *.

  ------------------------------------------------------------------------------

  * HP w1907 (wide LCD HP w1907 monitor) * Mode * 1440 x 900 (32 bit) (60 Hz)

  * Manufacturer * Hewlett Packard

  * Serial number *[personal information]

  Manufacturing Date * week 28, year 2007

  Type signal * Analog

  ------------------------------------------------------------------------------

  * Video card *.

  ------------------------------------------------------------------------------

  * Intel (R) 82945G Express Chipset Family * manufacturer * Intel Corporation

  * Video card chip Type * Intel (R) 82945G Express Chipset Family

  * Video card memory * 256,00 MB

  * Video card BIOS * Intel video BIOS

  *Driver*c:\windows\system32\drivers\igdkmd32.sys

  * Driver version * 7.14.10.1461, 25/03/2008

  ------------------------------------------------------------------------------

  * Device of Capture video *.

  ------------------------------------------------------------------------------

  * Live! Cam Video IM Pro (VFW) * Device driver file name * qcap.dll

  ------------------------------------------------------------------------------

  * Modem *.

  ------------------------------------------------------------------------------

  * PCI Soft Data Fax Modem with SmartCP * model * PCI Soft Data Fax Modem with SmartCP

  *Driver*c:\windows\system32\drivers\modem.sys

  * Driver version * 7.74.0.0, 06/05/2008

  ------------------------------------------------------------------------------

  * Sound card *.

  ------------------------------------------------------------------------------

  * Realtek High Definition Audio * manufacturer * Realtek

  *Driver*c:\windows\system32\drivers\rtkvhda.sys

  * Driver version * 6.0.1.5789, 11/02/2009

  ------------------------------------------------------------------------------

  * Network card *.

  ------------------------------------------------------------------------------

  * Intel(r) PRO/100 VE Network Connection * MAC address *[personal information]

  * IP address * 0.0.0.0

  * Gateway IP address * 192.168.1.254

  * Speed * 0 bps

  *Driver*c:\Windows\System32\drivers\e100b325.sys

  * Driver version * 8.0.47.0, 06/12/2007

  ------------------------------------------------------------------------------

  * Printers *.

  ------------------------------------------------------------------------------

  * Microsoft XPS Document Writer * model * Microsoft XPS Document Writer

  * Path * Microsoft XPS Document Writer

  * Driver Path*C:\Windows\system32\spool\DRIVERS\W32X86\3\mxdwdrv.dll

  * Driver version * 0.3.6002.18005

  * Microsoft Office Document Image Writer Driver * Model * Microsoft Office Document Image Writer Driver

  * Path * Microsoft Office Document Image Writer

  * Driver Path*C:\Windows\system32\spool\DRIVERS\W32X86\3\mdigraph.dll

  * Driver version * 0.3.8166.2

  * HP Photosmart D7300 series * model * HP Photosmart D7300 series

  * Path * HP Photosmart D7300 series

  * Driver path * C:\Windows\system32\spool\DRIVERS\W32X86\3\UNIDRV. DLL

  * Driver version * 0.3.6002.18005

  * HP Photosmart C4200 series * model * HP Photosmart C4200 series

  * Path * HP Photosmart C4200 series

  * Driver path * C:\Windows\system32\spool\DRIVERS\W32X86\3\UNIDRV. DLL

  * Driver version * 0.3.6002.18005

  * Default printer * true

  ------------------------------------------------------------------------------

  * Keyboard *.

  ------------------------------------------------------------------------------

  * Multimedia PS/2 keyboard optimized * manufacturer * HP

  *Driver*c:\windows\system32\drivers\i8042prt.sys

  * Driver version * 1.0.7.3, 07/02/2007

  ------------------------------------------------------------------------------

  * Pointing device *.

  ------------------------------------------------------------------------------

  * PS/2 Compatible mouse * manufacturer * Microsoft

  * Driver provider * Microsoft

  *Driver*c:\windows\system32\drivers\i8042prt.sys

  * Driver version * 6.0.6001.18000, 21/06/2006

  ------------------------------------------------------------------------------

  * USB controller *.

  ------------------------------------------------------------------------------

  * Intel (R) 82801G (ICH7 Family) USB Universal Host Controller - 27 c 8 * manufacturer * Intel

  *Driver*c:\windows\system32\drivers\usbuhci.sys

  * Driver version * 6.0.6002.18005, 21/06/2006

  * Intel (R) 82801G (ICH7 Family) USB Universal Host Controller - 27 c 9 * manufacturer * Intel

  *Driver*c:\windows\system32\drivers\usbuhci.sys

  * Driver version * 6.0.6002.18005, 21/06/2006

  * Intel (R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA * manufacturer * Intel

  *Driver*c:\windows\system32\drivers\usbuhci.sys

  * Driver version * 6.0.6002.18005, 21/06/2006

  * Intel (R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB * manufacturer * Intel

  *Driver*c:\windows\system32\drivers\usbuhci.sys

  * Driver version * 6.0.6002.18005, 21/06/2006

  * Intel (R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC * manufacturer * Intel

  *Driver*c:\windows\system32\drivers\usbehci.sys

  * Driver version * 6.0.6002.18005, 21/06/2006

  I have installed a NETWORK card in an open PCI slot, installed the drivers, and the problem is solved.

• Lost my internet connection, even when wired

  My laptop was working fine then one day just stopped connecting to the internet.  I have a computer dell laptop (Inspiron 1525) with vista.  I ran each test there is.  He says that I have "local".  I try cable and wireless tried to obtain a new ip address and just could not get my maptop online.  It has been more than two months without it and I go to school online.  I have 3 trays of Home Office and two of them are wireless and they work very well.  We tried my friend's laptop and told him the same thing: Wireless Network Connection Status, IPv4 & IPv6 connectivity is local.  I have a linksys router and use cox for my home internet provider.  All my other computers work and their wireless cards.  My laptop is new and I don't know anything.  Please help me get online?  any suggestions?  Dell wants $59.00 for help and I've been unemployed for months.

  Hello

  Are your other computers, Vista? Router is configured for WPA/WPA2 security? It broadcasts the
  SSID (name)?

  Try these:

  Eliminate corruption in case he has a role:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------

  Control Panel - Device Manager - network - Wifi - write down of the brand and the model - double click on write - tab - pilot
  version - click the driver update (this likely will do nothing that MS is far behind the pilots of certification).

  Do the same for the network (NIC) card

  Then right-click on each one and UNINSTALL - this will rebuild the driver stack - RESTART
  -----------------------------------------------------------
  Later, when I hope that you are online.
  l
  (If you get online, then you want to use this information to get the new drivers Wifi and NETWORK card and you can do it.)

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  Then - close all regular programs

  Start command - in the search box type-

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------------------------------

  Do this if up and running or not. Make sure you know the user name and password to the network.

  This will initiate you if you have any access - that and restart after the two.

  Control Panel - Network & Sharing Center - right click on Customize - set location Page - merge or delete
  networks - REMOVE ALL networks except those you are 100% sure aren't your network - so there is no doubt
  Delete it and really best to erase EVERYTHING. (if you delete one that you can relogon on when you access next time).

  Network & Sharing Center - on the left handle wireless networks - if all there right click Delete network
  Network & Sharing Center - on the left handle network connections - it should show nothing connected.

  Reboot - use start-up connect - connect to the network - when asked if you set it in private.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• 16 disks table PS5000 Sata - Raid for better performance and more capacity

  Good afternoon all

  I studied the whims of the various raid options and I was wondering if anyone has any practical idea using tables PS5000 SATA?  Basically, the table will backup disks to virtual machines as well as Raid would be preferable for the performance and capacity?  I was thinking 50 Raid or Raid 6, that the table is at a distance of my office in one data center so that there could be 2 failures before the disaster...

  Thank you very much

  Eric

  Hi Eric,.

  'best' depends entirely on the expected I/O model.  Small random writes should use R10.  RAID50 is usually a good compromise on space and performance.  But it has the risk of a double RAIDset faillée down.

  Another factor is that the PS5000 is end of life.  No support, firmware or parts of long term.  Help to off the shelf drives add uncertainty to the reliability of the table.   I would never use one of these for primary production so data.  To provide the best protection in this case, I would use only RAID6.   R10 would be down, but may suffer and failed with two failed disks in the mirror of the same value.

  Kind regards

  Don

• Windows 7 XPS and OneNote 2010 Printer Drivers not installed

  I installed Windows 7 Ultimate 64-bit and Office 2010 beta on a gateway M285-e. I can't print XPS or OneNote 2010 file. When I go to check the properties of the printer, I get an error reading:
  "The 'send to Microsoft OneNote driver 2010 Driver' (or"Microsoft XPS Document Writer") is not installed on this computer."
  He asked if I would like to install the driver. If I say yes, it takes me to the Add Printer Wizard. Where is this driver? Why these drivers would not be in the operating system if the printer is installed by default?

  After asking a few friends and family about the suggestions I found the solution to my problem. Apparently the driver "Microsoft XPS Document Writer" had for some reason any been uninstalled. Do not know why. I was able to reinstall the driver after Microsoft had it implemented as a physical printer on a custom port. To install I had to find the brand and model of the printer (make: 'Microsoft'; model: "Microsoft XPS Document Writer") in the master list in the Add Printer Wizard and complete the wizard. This fixed the problem of the XPS Document. It also fixes printing on printer OneNote 2010 as well. I was never able to find the driver to print to OneNote feature, but apparently the feature depends on printing on XPS document printer. Setting the XPS print driver paper fixed both of my problems.

• How to send text to the Clipboard in webworks (blackberry 10)?

  No matter what the API support or something that I would like to invoke? Thank you.

  There is no JavaScript Clipboard API provided by the web platform default.

  However, you can build your own custom extension of WebWorks.  To do this, you must

  (1) follow the instructions of our model in Github to write your own extension.

  (2) exposes the methods of the C/C++ native libclipboard API to your extension API.

  (3) install your extension in the SDK WebWorks

  (4) change your config.xml and project to use your extension.

  Good luck. If you do not end up building something that works, please consider contributing it to the WebWorks-community-APIs in Github repo.