PLS-00302 in FOR... LOOP

Similar Questions

• PLS-00302: component must be declared.

  Hi all
  
  As a user MEXX, I created the following procedure... I can able to execute the procedure... When I give debugging, run on this proc to user test1 prov... get the error:
  
  PLS-00302: component '. D_COMMAND' must be declared
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored
  
  the user test1 has all the necessary rights on the tables EIM_EXECUTED_COMMANDS, EIM_COMMAND_RECORD and the sequence spc_trans... I created synonyms private for all that it opposes in the test1 schema...

  CREATE OR REPLACE PROCEDURE MEXX.D_COMMANDS AS
  PRAGMA AUTONOMOUS_TRANSACTION;
  CURSOR CR_MJI_SIN IS
  SELECT sno, cno, iumber  FROM TEST1.m_mca;
    C_SUBNO VARCHAR2 (20);
    C_CARDNO VARCHAR2 (12);
    C_IMSI_NUMBER VARCHAR2 (30);
    TRANSNO1 NUMBER (8);
      BEGIN
    OPEN CR_SMS_SUB;
    LOOP
      FETCH CR_SMS_SUB INTO C_SUBNO,C_CARDNO,C_IMSI_NUMBER;
      EXIT WHEN CR_SMS_SUB%notfound;
     SELECT  spc_trans.NEXTVAL INTO TRANSNO1 FROM DUAL;
     INSERT INTO EIM_COMMAND_RECORD ( SUBSCR_TYPE, AREA, SUBNO, SERORDNO, TRANSNO, EXC, EXCSYSTEM,
                PORTNO, SPC_FUNCTION, APPDATE, NXTROUTINE, RETRANSMIT, TRANSSTATUS, EQUIPID, SOTYPE, CARDNO, CARD_TYPE)
          VALUES ( 'G', '0', C_SUBNO, NULL , TRANSNO1, 'GSM1', 'GSM1', '1', 'SERI', sysdate, 'SPC001', 'Y', 10, 'MCA' , 66, C_CARDNO, 'PLI');
     INSERT INTO EIM_EXECUTED_COMMANDS ( TRANSNO, CMDNO, COMMAND, TIMEOUT)
          VALUES (TRANSNO1, 1, 'ADD MCA FOR '||C_SUBNO||' USING (IMSINO='||C_IMSI_NUMBER||')', 30);
    END LOOP;
    CLOSE CR_SMS_SUB;
    COMMIT;
  EXCEPTION
  WHEN OTHERS THEN
        raise_application_error(-20001,'An error was encountered - '||SQLCODE||' -ERROR- '||SQLERRM);
  END;
  /

  Thank you
  Kai

  Hi Kai,

  That's true, then, that you have an object in the schema TEST1 called MEXX?

  If so, I guess you can

  Drop that
  or
  Rename that
  or
  Create synonm private TEST1. D_COMMAND for MEXX. D_COMMAND
  or (my favorite)
  declare D_COMMAND within a packet, instead

  Concerning
  Peter

• Cursor object and cursor for loop back

  I am beginner in Oracle and the serious database of programming in general. Right now I'm studying the sliders. I more or less understand how works when the cursor returns a record, but I can't understand why this does not work when the cursor return object and I use "cursor for loop.
  
  Here's the test code:
  
  CREATE or REPLACE TYPE typ_Test () AS OBJECT
  text VARCHAR2 (50)
  );
  
  CREATE TABLE t_Test to typ_Test;
  
  INSERT INTO t_Test VALUES (typ_Test('111'));
  INSERT INTO t_Test VALUES (typ_Test('222'));
  
  -work, simple loop
  DECLARE
  CURSOR cur IS SELECT VALUE (o) FROM t_Test o;
  typ_Test obj;
  BEGIN
  Heart OPEN;
  LOOP
  Fetch cur INTO obj;
  OUTPUT WHEN heart % NOTFOUND;
  dbms_output.put_line (obj. (Text);
  END LOOP;
  CLOSE cur;
  END;
  
  
  
  -doesn't work, cursor for loop
  DECLARE
  CURSOR cur IS SELECT VALUE (o) FROM t_Test o;
  BEGIN
  FOR news of obj IN LOOP
  dbms_output.put_line (obj. (Text);
  END LOOP;
  END;
  
  
  
  Error report:
  ORA-06550: line 5, column 30:
  PLS-00302: 'TEXT' element must be declared.
  ORA-06550: line 5, column 5:
  PL/SQL: Statement ignored
  06550 00000 - "line %s, column % s:\n%s".
  * Cause: Usually a PL/SQL compilation error.
  
  
  EDIT:
  In fact I found no examples on the net of its use "cursor for loop" with cursor that returns the object. Only when the record is returned...
  
  Published by: user10393567 on February 10, 2009 07:38

  user10393567 wrote:
  Now, in the 'loop' example for what looks "obj" is a folder, not an object, and 'x' is attribute of this recording... But the cursor must return an object, not a record... What Miss me?

  In the FOR loop "obj" is a pointer to the cursor/query, not a subject in its own right. It gives you just a reference in the query.

  So with that you are referring to the query, but then you need to refer to the column in the query that you are interested, so why there need a name (in my case I called it 'x'). 'x' is the object, and then you refer to the attribute of this object "text".

  In the first request that you simply select the value directly object in a variable, so no matter what it's called in the query values are returned by the position that is the first column in the query goes into the first variable in the INTO clause. Once you have that then the variable itself contains the object, and you can just refer to the attribute within that.

  Hope that makes sense.

• PLS-00302: component 'CHAIN' must be declared

  Hello together,
  
  I'm new to PL/SQL. I have the following problem.
  
  I get the following errors in Oracle 10 g R2:
  
  256/18-PLS-00597: expression "PRUEFE_TAB" in the list IS evil
  type
  
  263/13 PL/SQL: statement ignored
  263/27-PLS-00302: component 'ENDDATUM' must be declared
  
  In the following Code Snnipet, I have demolished all (IMO) Code unrelevant.
  

      procedure pruefe_wiederaufsetzpunkt(procname_p in varchar2, datenherkunft_p in number, returncode_p out number, 
                                          import_wiederauf_p out date) as
  
          cursor pruefe_cur (procname_cp varchar2, datenherkunft_cp number) is
          select proc.wiederauf_id as wiederauf_id,
                 proc.procname as procname,
                 proc.import_id as import_id,
                 proc.startdatum as startdatum,
                 proc.enddatum as enddatum,
                 proc.wiederaufdatum as wiederaufdatum,
                 lead(proc.enddatum) over (order by wiederauf_id desc) as next_enddatum,
                 lead(proc.wiederauf_id) over (order by wiederauf_id desc) as next_wiederauf_id,
                 imp.import_von as import_von
          from bws_odsimp_proc proc
               inner join bws_import_auftrag imp
               on (proc.import_id = imp.import_id) 
          where proc.procname = procname_cp
          and proc.datenherkunft = datenherkunft_cp
          order by wiederauf_id desc;
          
          type pruefe_type is table of pruefe_cur%rowtype;
          pruefe_tab pruefe_type; 
  
      begin
          open pruefe_cur(procname_p, datenherkunft_p);
          loop
              fetch pruefe_cur
              into pruefe_tab;
  ...
                   if pruefe_tab.enddatum is null then
  ...
              end if;            
          end loop;
          close pruefe_cur;        
      end pruefe_wiederaufsetzpunkt;

  Now, I'll tell you what I think that what the code:
  
  I think I declare an array of the type of the cursor. Then I get in a loop for each row of an execution in the set table. And later I want to get 'access' cervical 'ENDDATUM' in my line retrieved information
  
  Can someone helpl me to find the right way for this?
  
  Thank you very much
  
  concerning
  
  Published by: user10283133 on 28.10.2008 04:21

  Try directly declaring the variable rather than by defining the type declaring the variable as below:

  pruefe_tab pruefe_cur % rowtype;

• for loop in formula node does not

  Hello

  I; m trying to use for loop in the node of the formula, but it is does not work. I want the output (y1) product value in certain range (a and d, and of course one is smaller than d). I ' do not use primitive labview since a and d are keep changing (both are variable). I tried to put "return 0;" after the y1 equation but the error popup.

  The issue of the loop works not because it gives the last value (I average would be ""). It does not begin with an (initial) value.

  Please help me how to solve this problem...

  Pls ignore other variables not used in the equation. Thank you!! A lot

  Your code works.

  

  But why you use loop?
  You get the last value, so you can get it in a single step with x correct;

  Also why you say that can not use primitives?
  If you use wire instead of terminals or local variable States values constant.

  Y1, y1_2, y1 3 is the same values calculated differently.

  

• nested for loop in the collection

  Hi Experts,

  Collection1

  ============

  SELECT o.object_id

  LOOSE COLLECTION l_obj_info

  FROM (SELECT n.node_id, n.object_id

  N nodes

  START WITH n.node_id = 100

  N.node_id CONNECT BY PRIOR = n.parent_node_id) n

  JOIN IN-HOUSE

  objects o ON o.object_id = n.object_id

  WHERE o.object_type_id = 285;

  s Collection2

  ============

  SELECT *.

  LOOSE COLLECTION l_tab

  OF ((SELECT REGEXP_SUBSTR (i_l_text, "[^,] +', 1, NIVEAU)))

  OF THE DOUBLE

  CONNECT BY REGEXP_SUBSTR (i_l_text, "[^,] +', 1, LEVEL") IS NOT NULL));

  END;

  collection3

  ============

  SELECT o.object_id

  LOOSE COLLECTION l_fin_tab

  Of objects o JOIN ATTRIBUTES att

  ON o.object_id = att.object_id

  WHERE o.object_id = collection1.object_id

  - AND att. VALUE = collection2.val;

  Please tell me how to implement for loop in the collection3 to get the values of collection1 and s collection2.

  I tried in the way below

  CREATE or REPLACE TYPE LIST_OF_ATTRIBUTES_TYPE AS TABLE OF THE varchar2 (4000);

  /

  CREATE or REPLACE TYPE LIST_OF_OBJECT_IDS_TYPE AS TABLE OF THE number (9);

  /

  (F_get_objects_by_type_id) CREATE or REPLACE FUNCTION

  i_object_type_id in NUMBERS

  i_l_text IN VARCHAR2,

  i_scope_node_id NUMBER

  )

  RETURN list_of_object_ids_type

  AS

  CURSOR objs_info

  IS

  SELECT o.object_id

  FROM (SELECT n.node_id, n.object_id

  N nodes

  START WITH n.node_id = i_scope_node_id

  N.node_id CONNECT BY PRIOR = n.parent_node_id) n

  JOIN IN-HOUSE

  objects o ON o.object_id = n.object_id

  WHERE o.object_type_id = i_object_type_id;

  l_tab list_of_attributes_type: = list_of_attributes_type ();

  -l_obj_info list_of_object_ids_type: = list_of_object_ids_type ();

  l_fin_tab list_of_object_ids_type: = list_of_object_ids_type ();

  BEGIN

  BEGIN

  SELECT *.

  LOOSE COLLECTION l_tab

  OF ((SELECT trREGEXP_SUBSTR (i_l_text, "[^,] +', 1, NIVEAU)))

  OF THE DOUBLE

  CONNECT BY REGEXP_SUBSTR (i_l_text, "[^,] +', 1, LEVEL") IS NOT NULL));

  END;

  IF l_tab. COUNT > 0

  THEN

  BECAUSE me IN objs_info

  LOOP

  FOR j IN l_tab. FIRST... l_tab. LAST

  LOOP

  SELECT o.object_id

  LOOSE COLLECTION l_fin_tab

  O JOIN ATTRIBUTES att OBJECTS ON o.object_id =

  att.object_id

  WHERE

  att. VALUE = l_tab (j) and o.object_id = objs_info (i);

  END LOOP;

  END LOOP;

  END IF;

  RETURN l_fin_tab;

  END f_get_objects_by_type_id;

  /

  What this different problem from that of pls 00382 expression is incorrect, as they were returning a record type ?

  Please do not raise the same question several times. The answer is always the same. Your data model is seriously wrong - and that's the reason why you can't get data from it.

• ORA-06550-PLS-00302 error on execution mapping

  I have a mapping in OWB 11.2.0.3, I can bend and validate.
  But if I like him to run it it fails with the following error:
  ORA-06550: line 1, column 1487: PLS-00302: component 'MAPPING_NAME' must be declared ORA-06550: line 1, column 1470: PL/SQL: statement ignored
  
  I've already found a post that said: grant run owner_name. "' name map ' to user_name;
  In my case it does solve the problem.
  
  Someone at - it an idea of what the problem might be?
  
  
  Thanks for any help,
  
  Benjamin

  We have the same problem on OWB 11.2.0.3 and resolved to rename a schema name, because it was the same thing to another database object. If this is your case, you can change the name of the database schema and the location on OWB.
  We hope this help you.

  To view the possible duplicate objects (drawing object):

  SELECT *.
  FROM DBA_OBJECTS
  WHERE OBJECT_NAME = '';

  On the Oracle document is much better explained:

  [http://docs.oracle.com/cd/E11882_01/relnotes.112/e24470/toc.htm]

  Oracle® Warehouse Builder Release Notes
  * 11g Release 2 (11.2) part number E24470-05 *.

  [...]

  7.14 existence of an object in the schema with the same name as the schema target in the database
  12776878: If an object exists in the schema with the same name as the schema target in the database, an error is displayed.

  For example:

  Named A schema has an object called q. schema named Q exists and has an object called Z.
  When you call from SchemaQ.ObjectZ to a scheme A, it looks in schema A Q.Z. Z is not found and displays the following error:

  ORA-06550:... : PLS-00302: component 'XYZ' must be declared
  Workaround: rename one of the objects Q to R or one letter other than Q.

  [...]

• PLS-00302: component 'ADD_DATATYPE_INDEX' must be declared.

  Hello guys,.
  I'm trying to add a data type index to my semantic network to explore search in full text on RDF describes the data.
  But facing the following error I would like to ask for help if someone can make a suggestion how can I fix this problem.
  Thanks in advance!
  
  SQL > show user
  The USER is "SYS".
  SQL > EXECUTE SEM_APIS. ADD_DATATYPE_INDEX ('http://xmlns.oracle.com/rdf/text');
  BEGIN SEM_APIS. ADD_DATATYPE_INDEX ('http://xmlns.oracle.com/rdf/text'); END;
  
  *
  ERROR on line 1:
  ORA-06550: line 1, column 16:
  PLS-00302: component 'ADD_DATATYPE_INDEX' must be declared.
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored
  --------
  
  In addition, I conducted the following audits:
  SQL > SELECT STATUS FROM DBA_OBJECTS WHERE OBJECT_NAME = 'SEM_APIS ';
  
  STATUS
  
  VALID
  
  Published by: 913830 on February 14, 2012 11:41
  
  Published by: 913830 on February 14, 2012 11:48

  You must upgrade your database to 11.2.0.2.0 or 11.2.0.3.0 to get the support of text indexing. Two updates should be available through My Oracle Support. 11.2.0.3.0 contains a native support for named graphs.

  Thank you
  Matt

• The execution of a stored procedure from inside the cursor for loop?

  I posted this in the SQL Developer forum, but I tried in SQLPlus and get the same error, so I think it's an encoding issue.
  I have a piece of code that I'm trying to write that will only be executed once. The goal: we have three tables relating to the pieces of information. Each table has a column that stores the number of site that belongs to the part. We want to copy the parts of a site to about 130 sites which don't have any info on parts. The number of site is stored in another table. So I created three stored procedures, one for each of the three tables that we, who take 2 inputs: a source and destination site. Procedure names are: ptfile_copy_fac, ptxref_copy_fac and ptvndrs_copy_fac.
  
  The problem I have is that I can run the procedures in a separate worksheet in SQL Developer, but when they are integrated in this cursor for loop, I get the following message from SQL Developer:
  
  ORA-06550: line 23, column 11:
  PLS-00103: encountered the symbol "PTFILE_COPY_FAC" during the expected in the following way:
  := . (@ %; immediate)
  The symbol ': = ' was replaced by 'PTFILE_COPY_FAC' continue.
  
  He repeated this for each of the three methods. I have attached the code I am trying to run below. He expects an assignment operator, but I have no idea why.
  
  If there is a better way to do this, by all means let me know. I'm a SQL Server guy, I'm not sure how to do what I do using PL\SQL.
  
  / * Declares the variables source_fac and dest_fac.
  The source_fac is the installation that we copy parts.
  The dest_fac is the installation we copy parts to.* /
  
  DECLARE
  source_fac facility.facility_num%type;
  INSTALLATION OF DEST_FAC. TYPE % FACILITY_NUM;
  
  / * Declare cursor to use loop for.
  Slider load number installation and the status of the installation.
  Is not installation of 1 or 2, since these will be
  the main source of facilities.*.
  
  CURSOR fac_cursor
  IS
  SELECT
  facility_num,
  div_state
  Of
  installation
  WHERE
  facility_num NOT IN (1,2);
  BEGIN
  FOR fac_row IN fac_cursor
  LOOP
  
  / * Test for the State of the installation. If a Canadian State, the source_fac value 2.
  Otherwise, the value source_fac 1.* installation.
  
  IF fac_row.div_state IN ("AB", "BC", "Mo", "NB", "NL", "NT", "NS", "NAKED", "WE", "PE",
  "QC", "SK", "YT")
  THEN
  source_fac: = 2;
  ON THE OTHER
  source_fac: = 1;
  END IF;
  
  / * Sets the installation of destination to the facility_num from the cursor * /.
  
  DEST_FAC: = FAC_ROW. FACILITY_NUM;
  
  / * Execute the three procedures, past of the source and dest AEC variable * /.
  
  run ptfile_copy_fac (source_fac, dest_fac);
  run ptxref_copy_fac (source_fac, dest_fac);
  run ptvndrs_copy_fac (source_fac, dest_fac);
  
  END LOOP;
  
  END;
  
  Published by: SunDevilKid on March 3, 2010 15:31
  Update the comments you make more sense of the code.

  EXECUTE is a SQLPlus command, change your code to

  dest_fac := fac_row.facility_num;
  ptfile_copy_fac(source_fac, dest_fac);
  ptxref_copy_fac(source_fac, dest_fac);
  ptvndrs_copy_fac(source_fac, dest_fac);
  END LOOP;
  

  Max
  http://oracleitalia.WordPress.com

• PLS-00302% column type other schema

  Hello!
  
  I came across the following error of the puzzle game in Linux 10.2.0.1.0 Oracle.
  I'm trying to define the following type:
  
  create or replace PACKAGE MYSCHEMA. PACOTE ACE
  TYPE rnoRow IS RECORD (order OTHERSCHEMA. Regras_Objectos.Ordem%type);
  end MYSCHEMA. PACOTE;
  /
  
  The error I got is:
  Error (205,71): PLS-00302: component 'Regras_Objectos' must be declared
  
  It's the definition of the table:
  
  CREATE TABLE 'OTHERSCHEMA '. "" REGRAS_OBJECTOS ".
  (SELECT "ORDER" NUMBER (5.0) NOT NULL,)
  ACTIVATE THE "OBJECTING" VARCHAR2 (2 BYTE) NOT NULL,
  VARCHAR2 (255 BYTE) "DESCRIPTION."
  "OBSERVATION" VARCHAR2 (255 BYTE),
  VARCHAR2 (50 BYTE) "GS_TYPE."
  VARCHAR2 (50 BYTE) "GS_STYPE."
  'REGRAS_OBJECTOS_PK' CONSTRAINT PRIMARY KEY ("OBJECTING")
  );
  
  I can connect to MYSCHEMA/MYSCHEMA and bring a select statement to OTHERSCHEMA without problem:
  select count () of "OTHERSCHEMA". "" REGRAS_OBJECTOS "; *
  
  So the problem may not be the permissions. Just in case I granted access to all for this table.
  
  Someone has an idea what is the problem?
  This code works fine in 9g for Windows.
  
  For not stuck, we have created a view and deleted a reference to OTHERSCHEMA (check the following)
  But we must avoid a branch of code source diferent from the official.
  
  connect myschema/myschema;
  create view MYSCHEMA. Regras_Objectos in select * from OTHERSCHEMA. Regras_Objectos;
  
  create or replace PACKAGE MYSCHEMA. PACOTE ACE
  TYPE rnoRow IS RECORD (order OTHERSCHEMA. Regras_Objectos.Ordem%type);
  end MYSCHEMA. PACOTE;
  /
  CREATE OR REPLACE PACKAGE BODY MYSCHEMA. PACOTE ACE
  END MYSCHEMA. PACOTE;
  /
  
  Thanks for any input on this!
  
  Edu

  9g for Windows

  You mean 9i?

  Create a synonym and then try to access this object.

  Kind regards.

  LOULOU.

• parallel processing: for loop taking place

  Hallo,

  I have a loop 'for' runnin on this system: LabVIEW2009, windows7, intel i7.

  I wonder if and how I can tell to LabVIEW that he would be allowed to run different iterations of the loop at the same time (concurrently) on my processor with 8 cores.

  Now, it will execute the next iteration when it ended the previous, even one so is there no dependencies in iterations.

  I want to give a 'ownership' of the loop, which means that it can be "unfolded" for parallel execution.

  Thank you

  Pier

  pop up on for loop and select "configure interation Prallelism."

  Activate it.

  Wire a certain number to the new 'P' of entry to specify how many processors to spread it everywhere.

  Ben

• parallel for loops does not

  Hello.

  I'm learning the multi - thread programming. To start, I use "parallel for loops" and I was surprised that it does not work. One - thread loop work a few times faster (depending on settings) that multi - thread. I don't know why, and it is my request to correct my Vi to work properly.

  Lenovo, G580, Windows 7, 64-bit computer

  Intel Core i7 3632QM
  Ivy Bridge
  Specification Intel (r) Core i7-3632QM CPU @ 2.20 GHz
  Package (platform ID) Socket 988 B rPGA (0x4)
  Number of hearts 4
  Number of threads 8

  LabView 2011.

  Altenbach says:
  

  Gibbon wrote:

  What was 'strange' behavior?  In "linia dluga" when inside the loop is on '1' of the "spreed up' between one and multi-fil is about 3 times, when I put it in '20' this grow to 6.2. It was strange form me, becourse I expect a similar value.

  A parallel FOR loop has an overhead for parallelization (split the problem, then go back the results, etc.). If the code is very fast, the overhead is proportionally larger. If the Subvi takes a long time to complete, the overhead of parallelization is insignificant. It is often not worthwhile to parallelize the loops with a very simple and fast code.

  Gibbon wrote:

  Altenbach - I have another question if you can help me - how did you "seconds relative high resolution." VI "? -I want to say how did you know that there is this 'vi '. And thanks a lot for your modyfications.

  You can find it in vi.lib\utilities. It is well known.

  Maybe not well known enough!  the 'Hidden gems' package adds to your palattes.  It has also been considered by a nugget of the community

• For loop runs with the value of N unwired

  In this case will be a loop run connected to the loop N worthless? I have seen a few examples of the loop for run without a certain number of times set to be ran wired or for example a size of table or something like that.

  PauldePaor wrote:

  Here's a program I am and as you can see the image that the program runs without the loop N being wired. The program will run without problem

  As everyone else has said, you don't have to plug something on N.  If you wire up a table for loop for input "auto-index", the loop for will run automatically the smaller table size.

  Perhaps an example will help:

  

  This makes a loop on my table size (in this case, long of 5 elements).  On the edge of the loop for which resembles [] brackets, indicates that it is auto-indexé.  The loop should go through each item one at a time (1, then 2, then 3, then 4, then 5).

• Préallouée VI environment in paralleled for loop

  Hello

  I searched a bit and couldn't find that everything about this specific issue.

  If I have a Subvi in a parallelized for loop and the Subvi is set upon reentrant preallouee clone, the Subvi register also several characteristics of memory depending on the number of loop iteration For? My specific application is a Subvi containingvibration Analytisis screw using the previous data in their spread and filters.

  Thank you!

  
  

• For loop creates 1 d data table

  Hello, I am building the circuit below, and I'm running into a lot of problems with the loop, creating a table 1 d of data from certain types of data such as the ERROR OUT and the VISA NAME of RESOURCE. I understand why it does this, but I only need the last value in the table (the value of the last iteration of the loop for). This is true for me for the error, resource name of visa, and I was thinking of using the Boolean value that indicates when the for loop.

  Is there a simple way to extract the last value in the table 1-D so that it is correct to pass along trails, VISA and ERROR type?

  You actually create a block diagram, not a circuit.  A circuit is an electrical system including devices and wires.

  If you right-click on the tunnel and choose disable indexing, then you get the value of the last iteration rather than a 1 d table.

  I recommend you watch the LabVIEW tutorials online
  LabVIEW Introduction course - 3 hours
  LabVIEW Introduction course - 6 hours