Cannot change system settings in Vista

Similar Questions

• Cannot change connection settings

  Firefox 34.0 (Waterfox actually) after the new update doesn't let me save the connection settings. The radio of the proxy used to be on no proxy; I deleted prefs.js and now it is stuck on the proxy for the use system settings. Now the no proxy for field is filled for localhost and 127.0.0.1 and I cannot click OK if I enter the manual configuration of the proxy. Safe mode does not work.

  solved: https://www.waterfoxproject.org/fullnews/74.html

• You cannot change the settings of my Toshiba Power Management

  Cannot change settings in my power toshiba management section... can someone help me?

  Hi Matt

  I want to help you, but first of all, it would be very interesting to know the name of your unit.
  However if you have any problems with power management on your device, I suggest to download the new version of the Web from Toshiba site and reinstall the Power Saver utility.

  Good bye

• Tecra A10 - cannot change the settings of the BIOS with supervisor password enabled

  Hello
  I activated a supervisor for 1.50 acpi BIOS password.

  Since then, I am not able to change the settings (for example etc. - the right of the screen of the BIOS boot order does no more).
  I access the bios with pressing ESC on the boot process, then F1 when prompted "" check system, then press [F1] key. Problem is that I don't ask the supervisor password.
  There should be a prompt for the supervisor password, but it's not. So I am not able to connect as a supervisor.
  I know I can manually change the boot sequence by pressing F12 during startup, but this strict solve my problem.

  THX in advance
  elitecamper

  Have you tried to update the BIOS? On the Toshiba site, I can find a newer version that you have right now. Check it!
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before setting a supervisor password load default settings in the BIOS and then you can set the password and try again. Maybe it works.

• The remote desktop icon - cannot change the settings & only appeared yesterday - have I been compromised

  Hello

  I had a quick glance around my system because I think it has been compromised. Today, I noticed something I never saw before a "Remote Desktop connection" icon in my documents - time created yesterday - at about 20:00 - 08/04 when I was not on the machine and certainly don't remember updated anything.
  I went into control panel / system/distance and unchecked boxes related to assistance remotely etc. Is there anyway that anyone can access my machine remotely? or how would I know if they have?  The sudden appearance of this icon and the calendar has caused me some alarm. I deleted it + at the present time, it is in the trash. I did it because it gives an error when I try to save changes to settings that do not allow access.
  Someone could give me some advice please on what this could be and how I can assure any remote access to my pc. (Windows XP / wired ethernet via Bt Home Hub connection)  Thank you.
  Hello
  If you think that your computer is infected with malware, try following the steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove the malware more. If you have any questions, just ask me. I hope this helps you.
  Brian

• Try changing the settings of Vista firewall, but the configuration of the firewall Panel does not respond.

  I'm trying to access the port through the Windows Vista firewall.  When I open the firewall Panel and try to change the settings. The hourglass disappears and will not show the screen for changes.  So you can not close the firewall Panel.  Only way to get rid of it is to use the Task Manager and end task.  Any ideas?

  Hi wolfpackertom,

  Present on the computer some third party software may hinder the process.

  I suggest you try the following steps:

  The computer in the boot and a test

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Note: It is not recommended to fork or change options of windows firewall. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage from hackers and malicious software (such as worms).

  He may want to know:

  Understanding - Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-Firewall-settings

  What are the risks of allowing programs through a firewall?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-risks-of-allowing-programs-through-a-firewall

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot change the settings on the computer. No access to the administrator account

  Original title: I can't access permissions to change settings or programs.

  I can not access permissions to change any settings or programs and do not have access to an administrator account, I tried what allows one but you must have admin permission to do so. Please point me in the right direction, it seems that Ive tried everything. ID realyy don't want to spend money on software

  Hi Christophe,

  -With which user account you have connected? It is a standard user account?

  -What happens when you try to change the settings? You receive an error? In the affirmative, please let us know the exact error message.

  Since you are not able to create an administrator account, I suggest you to enable the built-in Administrator account.

  1. you must start the computer by using the Windows 7 installation media.

  Follow the steps in http://windows.microsoft.com/en-us/windows/what-are-system-recovery-options#what-are-system-recovery-options=windows-7 to enter the recovery options in Windows 7.

  Note: See the manual of the computer to change the Boot order in the BIOS and set the CD/DVD as first boot device.

  2. Once you start the computer by using the Windows 7 installation disc, follow the instructions on the screen then go food Advanced Options and select command prompt.

  In the command prompt, type net user administrator / Active: Yes

  After the command finishes, restart the computer and then log on to the administrator account by default, change the account type of the old user account and make as administrator and check if you are able to change the settings.

  Follow the steps in the http://windows.microsoft.com/en-in/windows7/change-a-users-account-type to change the account type of the user account.

  Once you have set the administrator type account with your user account, disable the default user account by following these steps.

  1. login to your user account.

  2. open the command prompt, type cmd. exe in the run search and right click on cmd.exe and select Run as Administrator.

  3. type net user administrator / active: No.

  This will disable the built-in Administrator account.

  Hope this information is useful.

• You cannot change the settings of UAC with the guest account

  adadadsadadsada

  You cannot change the UAC settings through the guest account. You must be an administrator to perform the operation.

• OfficeJet 8600: Cannot change network settings

  I have the same problem, as described in this previous thread where you can't change any settings when connecting to the printer via EWS.  Due to the installation, I use a box with Windows Server R2 2012.

  I can't change the IP address I get the message 'invalid input '.   I tried using the compatibility settings, but applying that makes blank pages.   I noticed that I get the same message when I try to change the hostname also like the OP did in the above link.

  Are there updates for this problem?

  I could change it using Google Chrome on Windows 10... I guess he doesn't like IE on Windows Server?

• Family - sorry, you cannot change your settings now. Please try again later.

  I'm trying to add a site in the list for my children.  It fails and I get the error: "sorry, you can not change your settings now. Please try again later. "I tried for two weeks and wait until"later"is a euphemism for '' never. ''
  Has anyone else seen elsewhere?  What should I try next?

  Hello

  Our support specialist verified the information you provided. Please follow the steps below to solve the problem:

  1. Connect to Family Safety Web site
  2. Select the child who is not associated with a user account.
  3. In the blue bar above, click Remove family member and then confirm by clicking Remove.

  Let us know the results later.

  Thank you.

• Solved: Cannot change notification settings music app playing / open in Lollipop

  I have not found anyway to change notification settings (priority/silent/sound) in Xperia Z2 while listening to music or if the music app is running listening to music. I tried different applications (Walkman, Spotify, Google Music) with the music and the problem is present with all music applications. This problem came with the Android 5.0 update (Lollipop). If I want to change my mind, I have to stop the music and close the music application. KitKat, I could just press the power button longer and get notification settings, but no more with Android 5.0.

  There is a fix for this in 5.1 Android, but I have not found information there will be updates 5.1.

  If anyone has found a way to change settings while the music running application, or that I need to hope and wait for Android 5.1 upgrade?

  See you soon,.

  Janne

  Edit 2015-04-22: Add 'Resolved' prefix to the subject.

  jsavikko wrote:

  If anyone has found a way to change settings while the music running application, or that I need to hope and wait for Android 5.1 upgrade?

  Answering my own question:

  Pause music, turn the widescreen (or one if it was turned off and then first on the road once again) power button for a while, and then on again. Now you should be able to control sound notification settings when you press the volume key. If the playback volume volume touch control instead of notifications, turns the screen turned off again and wait a little longer before turning back on.

  With this method you don't need to close the music app notifications of control.

• Cannot change preview settings

  MacBook Pro (17 inch, late 2011)

  OS X 10.10

  First CC 2015

  Trying to change my settings to preview a sequence and can not. Delete all previews thru first and manually through osx. Any ideas?

  Thks

  Hernan

  Create a new sequence and copy and paste in the new sequence.

• Cannot change the settings after the take snapshot in VM

  Hello forum, I need to increase a disc size and the number of virtual processors on couple of virtual machines, the last week I have instant tool of these virtual machines. Today, when I try to change the settings, I see that the options are grayed out. Why is it so? This is a limitation of vmware. Do I have to delete the snapshots before making changes? Which will remove the ability to roll back changes if necessary. I'm under Windows 2008 R2 virtual machines.

  Virtual disks can only increase if they have no active snapshots. The snapshot files contains modified data blocks that correspond to their parent records, and this mapping I lost if you have increased a virtual disk with snapshots.

  André

• System administrator has set policies to prevent this installation. How to change these settings for VISTA on a laptop?

  I am installing an updated PLEX, also a space program of Kim Komando.I get the notice above. I am running VISTA on a laptop.

  Hello

  Have you tried to do a right click on it > and then select run as administrator to install.

  See you soon.

• How to change the settings of Vista mouse pointer

  Don't want the mouse pointer to can an action. You want to order by clicks.

  Have Vista.  When I use the mouse in Vista images or other areas, different things start happening simply by pointing the mouse on an object.  I want to be able to point at something and don't have anything happen unless I click on the mouse buttons.  How to replace the pointer (but still keep the visable pointer)?   I went in the mouse controls and couldn't find a substitution.  Thank you.

  Hello

  If a mouse (or if you use a touch screen and a mouse)

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Double-click to open an item - APPLY / OK (so well then set change as if you planned
  to leave it like that and then go back and change it back).

  Control Panel - mouse - look for the settings for hover or click Automatic or similar depending on your mouse.

  When a TouchPad

  Look in the Notification area next to the clock for all TouchPad control program.

  Control Panel - mouse - also look for it TouchPad (mine is on the device however settings tab
  other brands and maybe on the other tabs and more than one). There are usually the parameters that
  can determine if a click, double click, hover or can open or close a program.

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Double-click to open an item - APPLY / OK

  If some people are well positioned can change to some other setting if you plan to leave
  them that way and then change again.

  Hope this helps

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.