pls help - Film is too red on DVD by Encore CS5.1

Similar Questions

• Make blu - ray discs with the content of the standard dvd in Encore CS5

  Given that blu - ray 25 gb discs have become affordable, I would like to take advantage of the increased capacity of the content of the standard DVD on them.

  In a Word, I would put about 8 hours of flow 8000 720 X 480 video on a disc blu - ray 25 GB with no transcoding.  If I said that my project is a DVD I can tell it to "do not transcode" my property, but as soon as I change the option on Blu - ray, I have a wide range of Hi Def only options or automatic transcoding.  This is much more than 25 GB of the file size.  I can do this in TMP GENÇ TMPGEnc works, I can specify each track or not to transcode, and what bitrate etc. and then burn a blu - ray disc-compatible with the standard def content-but my menu options are more limited than in the still and the work process is slower.   I'd rather that in again if possible.  Is there a way to do that in Encore CS5?

  Stan Jones wrote:

  The problem for me is the reason why you do not get "do not transcode" for a DVD file apparently valid, just because you make a Bluray disc.  I wonder if you change the image size in the properties of transcoding bluray.  I just show him the "do not transcode" for a non-transcoded avi file and also a previously transcoded m2v.

  all my videos that I coded for this and the last project had a black frame around them. for some reason any capture has not quite completely filled the entire box. not a BIG deal, but in the video effect > motion > scale I changed them all to 103 to 105, and I think that this IS why with my workflow wanted to transcode. so I just jumped the man in the middle and in first, like mpeg to preserve all the stops of chapter and chapter names.

• problem with my cd/dvd drive... pls help!

  I have windows 7 ultimate! I have problem with my hard drive! I use lg drive and all of a sudden it reads only the CD-ROM and the dvd rom no! its disturbing me a lot! pls help! Thanks in advance

  Hello

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
  themselves at the start because they will be competing for resources. This does not mean that this issue has been
  caused by those, however, it's a possibility depending on which and how many you have installed.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I use windwos xpsp3 teacher, my question is wn I install winxp after 6 months my hardware (motherboard) will be too bad so I'll be changed motherboard so I can use my OS still this material, I've heard could not appu .so wy use winxp.so me.pls help

  I use microsoft Windows xpsp3 teacher that my question is wn I install winxp after 6 months that my hardware (motherboard) will be too bad so I'll be changed motherboard so I can use my OS still this material, I've heard could not appu .so wy use winxp.so me.pls help

  You can reuse your current XP only if the version is not OEM.  OEM is a version that must be supported directly by the manufacturer of the computer first.  OEM is always linked to the first PC, the license is activated on.  This license is suppused to 'die' with the PC.  Now, there is a "grey area" on the definition of a PC, but accepted the more common definition all came to the conclusion that the 'mother' is the building block for the definition.  Therefore, change of motherboards would mean you have a "new" PC

• My pictures just disappear when I unlock them? pls help, do not know too much about photoshop ^^

  My pictures just disappear when I unlock them? pls help, do not know too much about photoshop ^^

  Hi Sebastian,.

  Please post your request in the appropriate section: https://forums.adobe.com/community/photoshop

  Kind regards
  Rahul

• Re install BIOS Pls Help

  Hello

  My computer is HP 430 Notebook PC. This is a brand new. but I did not get any CD driver with him. while I downloaded all the drivers for Windows 7 Ultimate 32 bit on HP official website. There is a driver called as below...

  
  

  

  

  

  So I press start to update the BIOS. at that time there than in the red question marked area (?:?) got the massege "do not shut down the PC when the update is complete" like that.

  
  

  during the update my PC has low power. Then it's the exit ramp.

  
  

  Now the problem is when I turnon my the computer power light but no display no sound, nothing comes on the screen. I think that the BIOS has been deleted or corruption. pls help me to do something about it. It is very useful for me

  
  

  Thank you everyone

  Looks like this power loss that happened after that BIOS reflash had progressed too far to recover, you may need to have HP reflash the BIOS eprom in their establishment. Call HP and ask them how to get it. Since it is still under warranty, you will not have to pay for the fix.

• minimize, maximize the task .bar and close icons are missing.pls help.

  my homepage is google.but when I open firefox, I don't see it.i can't see maximize minimize andclose icons too. pls help.

  You can be in full screen - hit F11. It is re - appear?

• HP Envy 4504: Envy 4504 photo prints too red with print quality = better

  Hello

  I hope someone can help.

  On my HP Envy 4504 photos are printed OK print normal quality, but when the print quality is set to best photos are printed to the red. In addition, with DPI Maximum printing photos are much too red.

  This takes place two times printed on paper Normal and on Photo paper

  With the GIMP, I tried to make an example of how a photoprint looks like.

  I made the example by changing the color Balance: Red cyan - about + 40:

  (my GIMP is Dutch...)

  

  Here is the result:

  LEFT: Photo printed in normal quality; Photo on the RIGHT printed in better quality:

  

  I have already completely remove the software HP Envy and did a clean reinstall. No change.

  I have print-head - cleaning cycles (2 times); color of HP-testprint strips looks very good: all are strong in alignment is correct

  Unfortunately: No picture change in best quality still too red.

  The ink levels are okay.

  Any suggestions what is wrong and what can solve this problem?

  Thank you for your support

  Kees-Jan Timmer

  Hi @Kees-Jan,.

  Welcome to the HP Forums!

  I noticed that your HP Envy 4504 prints photo is too red with print quality = best on Windows 10 operating system. I'm happy to help you!

  Where a setting is disabled, with GIMP, have you tried to print photo quality with other programs? If so, what happened?

  You use genuine HP cartridges or refills?

  None of your ink cartridges are low or empty?

  In the meantime, please make sure that all the steps in this guide, fixing poor print quality are executed. And let me know what happens!

  Thanks for posting and hope to hear from you soon!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• How to remove network drives mapped Windows 7.i can't get to delete.pls help me to solve it.

  How to remove network drives mapped Windows 7.i can't remove. Already disconnected, but still its disk showing with red cross.i am not able to create new drive with the drive letter of Red Cross, pls help me to solve it.

  1. open a command prompt.

  2 in the command prompt, type the following command and press ENTER.

  NOTE: replaced by z: in the command below with the actual drive letter of the mapped network drive that you want to cancel your computer window (deletion) mapping .

  • NET use Z:/delete

  3 when finshed, close the command prompts. So the mapped network drive shoud be removed from the window of your computer.

  Kind regards
  J Chambers

• Pls Help blackBerry smartphones! 9900 pings and bbm normal message do not produce Z10 and Q10.

  I need some serious help here as soon as possible, I can't reach all my friends with Q10 and Z10 by bbm normal message on my 9900... It will always bring X nothing I try to send them a message bbm nomal and Pings. I will receive their own message, but my own come deliver it to them, I will also see their updates of the pm and the will to see mine too.  Pls help me.

  Hello tooblackish

  Welcome to the Forums of the BlackBerry Support

  Sorry for the trouble, but I noticed this same problem with few other users, who could not send pings to any BlackBerry 10 there BlackBerry 7 devices.

  To solve your problem, I suggest to re-install BlackBerry Messenger!  To do this on your homescreen go to Options > device > application > locate and remove BlackBerry Messenger from there. After deleting to do a battery pull reboot as this device powered on remove the battery wait a min. then reinsert back.

  KB10040  : How to display or remove installed application on a blackberry smartphone   

   

  Finally, after the reboot, use your BlackBerry browser and go to www.blackberry.com/bbmdownload and download the latest available for your phone model. If device reboot prompt do then sign in with your ID BlackBerry even.

  Try it and tell us how it goes.

  _______________________________________________

  Please note:

  If you encounter BBM7 or higher then your BBM Contacts are integrated into your BlackBerry ID after installation when you log in with your BlackBerry ID Contacts is restored back, but if you experience any previous Kathy then first make a backup local, you can save on your press card, see this KB for additional assistance

  KB20554 How to back up and restore the BlackBerry Messenger contacts list 

• Pls HELP blackBerry smartphones! BB 8520 froze

  1. My BB Curve 8520, carrier is Vodafone in India froze.

  It happened when I was upgrading level player id calling & mobile applications of SFC.

  The screen froze showing apps "allow / deny". mobile SFC.

  I removed the battery like the sim & reinserted, but to no avail.

  I even tried to upgrade the software through web... but can't too.

  PLS... PLS HELP!

  When I say "until the handset lights up completely" I mean wait until the loading bar is complete and you are really looking to your homescreen.

• SYS. DBMS_SQL. Version of overload of PARSE CLOB error PLS-00172: string literal too long.

  I have This Oracle 12c Procedure

CREATE OR REPLACE PROCEDURE LOGINCHECK(stmt IN CLOB)
AS
  C INTEGER;
  N INTEGER;
  RC SYS_REFCURSOR;
BEGIN
  C := SYS.DBMS_SQL.OPEN_CURSOR;
  SYS.DBMS_SQL.PARSE(C,stmt,DBMS_SQL.native);
  N := SYS.DBMS_SQL.EXECUTE(C);
  SYS.DBMS_SQL.GET_NEXT_RESULT(C,RC);
  SYS.DBMS_SQL.RETURN_RESULT(RC);
EXCEPTION
WHEN NO_DATA_FOUND THEN
   NULL;
when OTHERS then
  RAISE;
END LOGINCHECK;

  
  

  for example, to create an oracle with a xml or clob type IN FastInventory procedure and pass xml from this link https://drive.google.com/file/d/0BwAVQqYmX0-zQ1d1VnNmZndfcVE/view?usp=sharing
  

  
  

  The of the stmt parameter is approximately 50000 characters.
  

  
  

  DBMS_SQL. ANALYSIS gives error PLS-00172: string literal too long.

  
  

  I'm passing stmt My .net code as parameter . OracleDbType.Clob then why this error occurring.

  
  

  I use Oracle 12 c database. Visual Studio 2012, .net Framework 4;
  

  OK now I have a response team of oracle.net where it says on tweeter

  @OracleDOTNET team .NET oracle

  Seems to be a bug specific to PL/SQL, because the error occurs on the DBMS_SQL. ANALYZE the call

  Thank you all who have helped and at least tried to solve this problem.

• CLob update fails with PLS-00172: string literal too long

  I have a clob column that needs updating with a message about message_id
  
  Description of the table
  
  SQL > desc cl_message1
  Name Null? Type
  ----------------------------------------- -------- ----------------------------
  MSG_ID(2) NOT NULL NUMBER (10)
  DATA NOT NULL CLOB
  
  UPDATE statement:
  CLOB variable data1;
  Start
  : data1: ='TESTHDR ^ add ^ 200812310374 ^ 15:53:22.0 2012-08-19 ^.
  TESTHDR ^ add ^ 200812310374 ^ 5652 ^ C0000029 ^ 15:46:49.0 2012-08-19 ^.
  TESTDWN ^ ADD ^ 200812310374 ^ 5652 ^ G ^ 03 ^ 00000999990000722444 ^.
  .....
  ... ----------------------------------------------------------------------------------------- 2376 lines of text-------------------------
  TESTDWN ^ ADD ^ 200812310374 ^ 5674 ^ G ^ 10 ^ 00000999990000743289 ^.
  TESTEND ^ 5674 ^';
  UPDATE cl_message1
  SET DATA =: data1
  WHERE
  msg_id(2) = '989';
  END;
  /
  
  When I run this statement it fails with
  
  
  SQL > @test_clob_insert.sql
  : data1: ='WAVEHDR ^ add ^ 200812310374 ^ 15:53:22.0 2012-08-19 ^.
  *
  ERROR on line 2:
  ORA-06550: line 2, column 10:
  PLS-00172: string literal too long
  
  According to my understanding of a bind variable can store a maximum of clob. Not sure why it is throwing this error. Help, please
  
  Concerning
  
  This column is stored in_row.
  
  
  SQL > r
  1 * select table_name, column_name, owner, in_row from dba_lobs where table_name = 'CL_MESSAGE1 '.
  
  OWNER, TABLE_NAME COLUMN_NAME IN2
  ------------------------------ ------------------------------ ---------------------------------------- ---
  VEERA CL_MESSAGE1 DATA YES
  
  Published by: 953621 on August 19, 2012 22:34
  
  Published by: 953621 on August 19, 2012 23:44

  953621 wrote:
  According to my understanding of a bind variable can store a maximum of clob. Not sure why it is throwing this error. Help, please

  Yes, if the binding variable is declared as a clob, so it can store the maximum size of the CLOB, but this isn't your problem.
  Your problem is that you set the clob data using a string literal that is a single quoted string. There is a limit to the size of the string literals, so you will have to accumulate the clob in adding a whole lot string literals instead.

• PLS, help me to reset safari on mac Ox: 10.11.5

  PLS, help me to reset safari on mac Ox: 10.11.5

  What do you mean by reset.

• I earsed my hd and now im trying to reinstall, but an error has occurred during installation, which means that I can't reinstall osx again. PLS HELP!

  I earsed my hd and now im trying to reinstall, but an error has occurred during installation, which means that I can't reinstall osx again. PLS HELP!

  Please tell us how wipe you the drive and how you tried to reinstall OS X. And what was the error, and how he help you trying to reinstall OSX again? You can look at writing an effective communities of Apple support question before you answer because we are not spirit or psychic readers.