Pls hlp! How to reset the State back to a page...

Similar Questions

• How to reset the State of package variables in all sessions connected (without requiring a disconnection and a connect) if they are reset in one of connected sessions.

  
  Hi people,
  Need help, the example requires that the value of packet data 'g_var' must be updated in the session/s connected everywhere without the session/s to be disconnected and reconnected.
  Here's the scenario:

  I created a table my_table having the pair name / value.
  A variable with global package "g_var' in his body and a get accessor method to access g_var variable from the outside world.
  This variable g_var is initialized within the block of the entry into force of the package and retrieves the current value of the variable from my_table.
  When I update the value in the table a trigger on my_table would reset the State of the package and therefore g_var to the most recent value in the same session
  All is well so far since the change in value is reflected in the current session, but if I've already connected session/s
  and I'm trying to retrieve the value of "g_var", it is not updated in already connected sessions and remains the same before the update.
  Can U help please how can I update this value in a session/s connected without having to disconnect and reconnect.
  because if I disconnect and reconect the existing sessions, it seems to show the updated value.

  Thanks in advance.

  Kind regards
  Gaurav Rajput

  Here are the Scripts:

  
  drop table my_table;
  create table my_table
  (
  my_variable_name varchar2 (100),
  number of my_variable_value
  );

  create or replace package my_package as
  Function get_g_var return number;
  end my_package;
  /

  create or replace package body my_package as
  number of g_var;
  
  Function get_g_var return number is
  Start
  Return g_var;
  exception
  while others then
  lift;
  end get_g_var;
  
  procedure init (my_passed_name varchar2) is
  Start
  Select my_variable_value in the g_var from my_table where my_variable_name = my_passed_name;
  exception
  while others then
  raise_application_error (-20004, "I got an error during Init");
  end init;

  Start
  init ('$'); -This is a call to time when the package is loaded into the memory of session
  exception
  while others then
  raise_application_error (-20003, 'Error in my_package');
  end my_pACkage;

  /
  create or replace TRIGGER my_trigger
  BEFORE DELETE OR UPDATE
  ON my_table
  FOR EACH LINE
  declare
  number of my_ret;
  Start
  DBMS_SESSION.modify_package_state (DBMS_SESSION. RESET);
  exception
  while others then
  lift;
  end my_trigger;

  /

  -It is initially set to null
  insert into my_table values ('DOLLAR', 62);
  commit;

  -test value for first time to package loading (62 views)
  Select * from my_table;

  Set serveroutput on

  declare
  my_variable varchar2 (100);
  BEGIN
  my_variable: = my_package.get_g_var;
  dbms_output.put_line ($my_var);
  END;

  -run the same block of end to start in another session it shows 62. All is well so far
  -check if the value after the update in the same session (shows 38), also check in another before the connected session as well (shows 62 and not 38)
  Update my_table set my_variable_value = 38 where my_variable_name = "DOLLAR";
  commit;

  Select * from my_table;

  Set serveroutput on

  -It displays 38 in this session, but there in an already connected session 62 and only after you log out shows 38
  declare
  my_variable varchar2 (100);
  BEGIN
  -my_variable: = my_package.g_var;
  my_variable: = my_package.get_g_var;
  dbms_output.put_line ($my_var);
  END;

  Package variables are stored in the private memory (PGA). The value is not visible in the session. A package variable is therefore not approach appropriate to your problem. You can look at in the context of the Application, as Solomon has said.

  http://docs.Oracle.com/CD/B28359_01/network.111/B28531/app_context.htm#CIHFJHCG

• How to reset the State of line

  Hi all
  Attribute in my current line made some changes, I don't want to not that changes update the database sometimes, but I have to commit the transication because there's a few other vo should be updated to the database. How do I do with this case?
  
  Bese cordially,
  
  Peter

  Peter,

  Create 02:00. Fix the table of the VO in the first AM & rest in the second. Engage only the second AM. So, that will commit all changes made on the first AM.

  Kind regards
  GYAN

• How to reset the homepage of "Firefox Home Page" when a software I downloaded did Yahoo search as homepage on start engine up-same update did not help.

  I downloaded a software that allows me to convert my laptop into a Wifi hotspot. He asked me (during installation) to set the home page of my browser like search engine Yahoo. After you download it, I tried to update Firefox by clicking "Troubleshooting information", but it hasn1t has worked so far. I would like to see the home page of Mozilla Firefox when I run my internet connection. Kindly help.
  Thank you and best regards,
  Safi.

  Hi, try to run the SearchResetadd-on, which will reset your home page, research and the new tab etc, otherwise.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• C5150 - how to reset the printer to clear the network password?

  I bought a C5150 which had been used as a screen.  I'm unable to access the built-in web server network setting.  Reset the printer to the factory setting, of the façade has no effect.  There are no instructions to all documentation on how to reset the printer.  Help!

  I guess that you did not read my * last * post here, which has been designed for you. in any case...
  
  PhotoSmart C5100
  -Press and hold the "Setup" & "left arrow" keys Release the two buttons. Display should say "enter special key Combo".
  -Press "OK".
  Display should say "Support" and display the FW XXXXX rev (you are now on the Help menu)
  
  TO MAKE RESET "Half full" in the HELP MENU:
  
  -Use the > to scroll to 'Resets the Menu' and press 'OK '.
  -Put "Full Semi" highlight Reset and press 'OK '.
  -Unit will shut off by itself in 3-5 seconds
  -Power and then turn it back on by button / stop
  -Leave the print alignment page - do NOT cancel
  -Allow to go through maintenance and Photosmart screen (normal)

• Satellite L310-D4011: how to reset the DVD region to 0 setting?

  Dear all,

  I have a Satellite L310 D4011 I bought recently in which I installed a DVD playback software.
  I run Windows XP. One of my friends played a video clip of the United Kingdom (Mccartney Live at red square) in the DVD player and the original region setting that was 0 with 5 remaining changes, went to 4 changes remaining and the area is now set to 2. I am in India where the region for DVD is 5. If I change to 5, I lose another change option.

  I don't want to leave my DVD ROM stuck 0 left options and some other areas.

  Can someone give me advice to reset the region back with five remaining options - as it was when I bought the laptop?
  I'll be very grateful. The salesperson who I bought the laptop will be able to get back to factory setting?

  Best wishes

  Hello

  I think Toshiba has nothing to do with it. To protect the film industry and interests all laptop manufacturers offer optical disk drives where you can watch movies with country code but only 5 times. The last chosen region code will be set as default. So if you have more than 4 codes there is no reason to panic. Just continue to watch movies in your favorite area.

  I'm 100% sure that Toshiba service or the vendor where you bought your laptop will say that they have nothing to do with it. In drive properties you have set out to clear how it works.

  In any case, you can try to contact them and ask for help.

• How to reset the parent password

  I'm on the learner user on the computer and I forgot my parent password how to reset or get back

  Hello

  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  For more information, refer

  http://support.Microsoft.com/kb/189126

• Got paper stuck in the printer and now will only print proofs. How to reset the printer

  Got paper stuck in the printer and now will only print proofs. How to reset the printer

  It looks like you may have some saved jobs in your queue that need to be removed.

  Here's how:

  To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
     
  After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• (1) how to reset the task in view/default Access Manager? __2) how could it have been modified?-my firewall is off, too. I am concerned about safety.

  When I open the window (in Windows Vista) Task Manager, it shows that the "Applications" tab  I can access is more 'Processes', tab 'Performance' and 'Network'... this just started recently.
  (1) how to reset the task in view/default Access Manager?
  (2) how could it have been modified?-my firewall is off, too. I am concerned about safety.

  Double-click inside the border/edge to bring it back to the default view for Task Manager.

  Malware scan:

  Download, install, upgrade and scan with Malwarebytes to check / remove Malware/spyware.

  If necessary, do all of the above work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

   

   

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  See you soon. Mick Murphy - Microsoft partner

• How to reset the windows media player 12 default settings

  Original title: how to reset the windows media player 12 default settings

  My Windows media Player 12 has stopped play all the sounds (Win 7 HP 64 bit) - I can play sounds with Windows media Center, DIVX, etc. of Winamp, but not with Win Media Player. I would like to reset Windows Media Player 12 to its default state, either by doing a reset or reinstall. Can someone tell me how to do what you please?

  Do these two steps [they are the closest thing possible to uninstall then reinstall WMP & will actually provide a new installation of WMP]

  1 unload WMP - Panel, programs and features, [left] turn on or off has Windows, multimedia features, clear box Windows Media Player, Yes, OK, restart the PC.

  2 reload WMP - Panel, programs and features, [left] turn Windows features on or off, multimedia features, set the Windows Media Player box, Yes, OK, restart the PC.

• How to reset the content when switching between tabs

  My use case, is that I have all of the multiple tabs displayed in the sidebar. The content of the tabs each has a title bar of free-form which is scalable. If lets say on tab 1, the title bar is developed, and then when you go to the tab 2, is it possible the collapse of the State of the title bar in tab 1 expanded. Or when you switch to tab 1, is it possible to reset the State of the title bar - meaning collapsed.

  I tried all possible solutions, such as the resetExpanded() or use of the definition of the extended property to false dynamically but no work.

  The only thing working is while I'm in tab 1, I develop the title bar while in the same tab, if I perform any other action, I could run resetExpanded() but that's it. Outside tab 1, as in the QML who has the tabbed pane, listening to side bar changed state events, events to change active tab etc., none to take effect.

  There is no ID for the expandableArea so I couldn't get to the extended property that I could create an Alias for.

  Also the unique ID that gets me access to the resetExpanded() is the ID of the

  FreeFormTitleBarKindProperties, and that's how I'm able to do the

  ID.expandableArea.resetExpanded () BUT that I couldn't create an Alias for this FreeFormTitleBarKindProperties because it is not to be an alias of an identifier is valid.

  So I don't know how to solve this problem, unless there is a way to destroy the contents of the tab whenever I switch to a different tab, but it is very inefficeint and suffers poor performance.

  Any ideas anyone how to solve this problem. Appreciate your help.

  Finally, I was able to solve it!

  Originally I had the game content tab statically at the beginning in the tab "as

  Before:

  Tab {}

  {somePage}

  }

  }

  After:

  Now, I created somePage using ComponentDefinition and assigined the content of the tab as

  tabbedPane.content = somePage, followed by all the properties of customization that I send to somePage

  Now in TabbedPane, I listen to two events below

  onActiveTabChanged: {}

  resetTabContent();

  }

  onSidebarVisualStateChanged: {}

  resetTabContent();

  }

  resetTabContent - calls the function

  function resetTabContent() {}

  mainPane.activeTab.content.resetDropDown ();

  }

  The resetDropDown() function is globally on all aspects for the TabbedPane

  {functionresetAccountsDropDown()}

  contentArea.expandableArea.resetExpanded ();

  }

  where contentArea is the ID of the kindProperties of the title bar

  {Page}

  title bar: title {} bar

  ID: pageTitle

  scrollBehavior: TitleBarScrollBehavior.Sticky

  type: TitleBarKind.FreeForm

  kindProperties: {FreeFormTitleBarKindProperties}

  ID: accountsArea

  {Of container

  }

  {expandableArea}

  }

  }

  }

  }

  Enjoy!

• How to reset the color scheme to the default level in Windows 7?

  I changed the default color of Windows 7 (32-bit version x) system palette, using the personalize > Windows color > link appearance and the dialog that results.   But she did background colors of controls like buttons, drop-down lists etc. in the dialogs implemented by applications, being identical to the forefront of the font of text on them.  This makes the information unreadable text.   I want to restore the default color palette, so that this information can be read.   I want to know how to reset the color scheme, since other changes in results window customization in unpredictable and unreadable color on other components of the application windows.
  As this resulted in almost total ease of use of my computer, I would be very grateful to anyone who can guide me to reset the color scheme for my computer to its normal state by default as soon as possible.   Thanks in advance.
  -arasan77

  Defects of appearance and personalization,

  http://www.SevenForums.com/tutorials/282-window-color-appearance-change.html

• How to reset the computer to start the boot minimum troubleshooting.

  I posted this screenshot because I have no idea what can be the maximum size of a question and I thought I have copy paste this but I to Sir's life saw the question so I did this. Additional information that could help. This is my task manager open resource monitor and windows firewall not wanting to tk starts. And I have windows updates where I chose to update (I try to deny each update.) And so far I've checked that I have 482,5 MB of updates of windows that say I should put to date. (apperently 130 important and 10 optional) in addition apperently my computer don't think that I am administrator I do not understand when I'm the only profile on the computer.

  Hello

  In response to the information provided by you, please try to follow the methods and check them off below if this can help,

  Step 1: Scan of Sfc.

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Follow the steps below to perform a scan of the SFC.

  1. press the Windows key + X key.

  2. Select prompt (admin).

  3 type the following command:

  Sfc/scannow

  Step 2: Clean boot.

  Make your systemclean boot State helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  https://support.Microsoft.com/en-us/KB/929135

   

  WARNING: After troubleshooting, refer to the section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Please let us know if the problem is resolved or you need additional assistance.

  Thank you.

• How to reset the Master encryption key in the encryption Transparent data...

  Hello

  I use Transparent data encryption in Oracle Database 11g Release 2.

  After having specified an Oracle Wallet location in the sqlnet.ora file as shown below:

  
  

  ENCRYPTION_WALLET_LOCATION =

  (SOURCE =

  (METHOD = FILE)

  (METHOD_DATA =

  (DIRECTORY = D:\Oracle\enc\admin\tde\wallet)

  )

  )

  Created the master encryption key using the statement

  SQL > ALTER the ENCRYPTION KEY SET of SYSTEM IDENTIFIED BY 'Abc123def456 ';

  Modified system.

  When I reset the master Encryption Key by using the statement get an error as shown below:

  
  SQL > ALTER the ENCRYPTION KEY SET of SYSTEM IDENTIFIED BY 'Easy2rem ';

  ERROR on line 1:

  ORA-28353: cannot open portfolio

  Please help me how to reset the master encryption key.

  Kind regards

  Kalashnikoff.

  Hi currently,

  you need to reset the master encryption key by using the exact same statement:

  CHANGE the ENCRYPTION KEY SET of SYSTEM IDENTIFIED BY 'Abc123def456 ';

  
  

  The passworsd you provide is only the password of the portfolio, the MK is not derived from this, but

  using a secure random number generator, the Wallet password can be changed separately

  using owm or orapki.

  
  

  Greetings,

  
  

  Damage
  

• How to reset the button incase they click New to create the same effect?

  OK guys,

  So im at a stop of triggers on the timeline, EX: sym.stop (1000);

  Then I'm animating a click on an element div/EX function:

  SYM.$("Rectangle2Copy23"). Animate({left:'3px',height:'77'});)

  How to reset the button incase they click New to create the same effect?

  Instead the object does nothing because it is already in position.

  I would go back to its original position and recreate the same effect.

  Problem is that the timeline stops... even if I go to another point in the timeline panel

  the last position assigned by the rest effect, I want to reset it even on the same point on the timeline...

  Thank you

  First of all, you need to upgrade your board animate to 2014.1.1 to open the membership re-shared, and

  then check this out:

  Dropbox - Archive_upgraded.rar

  Note: I added jquery explicitly for use. animate(), like the last Animate edge has no dependency on jQuery.

  HTH,

  Vivekuma