PLSQL utl_file.put_line error after the script running 8 ' e

Similar Questions

• Do "request failed: ' error after the workflow run 'assign a state change.

  I try to start a workflow that sends an email once a machine is put into operation.  A simple task, I think.

  I have installation vRA and vRO and am able to supply machines form vRA before making further changes.

  In vRO, I ran the workflow of customization of the vCO 'Install', and the workflow "to assign a workflow of change of State of a master plan and its virtual machines.  After you run the last workflow, I get the error "'request failed: not found YUNoWork and perhaps even deleted before commissioning end." when you try to configure a machine to. "

  The workflow of messaging works on its own, and after the execution of the workflow «Assign a state change...» ", I see not updated the property of 'WFStubBuildingMachine' on the action plan.

  Any comments would be greatly appreciated!

  The issue was that endpoint vRO was not added to the vRA.  After you add endpoint and the taking of the inventory, the problem has been resolved.

• System restore after the recovery running disk

  Hello

  Is there a way to restore my system to previous state after you run recovery disk?

  I forgot to backup my files and apparently lost my data after the recovery running disc. All suggestions will be appreciated. I'm trying to restore my system, but it is not restoration, its shows me only today's date.

  Best regards

  Hello Jazz

  Please slow down. Your ad is quite confusing. You can the prior words includes on two completely different ways.

  (1) previous state as factory settings. If you use recovery media is removed from the entire HARD disk and all data will be lost. There is no way to recover them. To the review no data more.
  (2) previous state by using System Restore tool. It will roll back OS time earlier, but all data will be there. Sorry, but if you have ever used recovery media, it's too late for this option.

• LSD unexpected closing of the errors after the installation of el capitan

  LSD unexpected closing of the errors after the installation of el capitan

  get a lot of errors after start-up and during work

  This procedure will remove some cache files. The files are generated automatically and do not contain any of your data. Sometimes they can become corrupted and cause problems like yours.

  Please, back up all data.

  Triple-click anywhere in the line of text below on this page to select this option:

  open $TMPDIR..

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing command + V. Depending on the web browser you use, you may need to press the return key. A folder with a long, random name should open. Inside, there should be a subfolder named 'C '. Drag that to the trash.

  Log off or restart the computer. Empty the trash. Test.

• Explorer.EXE error after the restoration of the ERD Commander

  Dell Inspiron B130

  Windows XP Service Pack 2

  Recently performed a HD format and new installation of XP SP2. After I installed all the drivers and others, I checked that the system was operating normally. After a few days of use, Windows Update downloaded Service Pack 3 and asked me to install. I started to install SP3, but at about 50%, the laptop battery is dead at Midway through the installation. I plugged the laptop on the power source and power. I restarted the laptop and XP started only a completely black screen and the white slider. No ALT + CTRL + DEL, desktop icons, etc.

  I rebooted the laptop of ERD Commander, ran the restore system and selected the first available Restore Point. Point of restoration chosen was recorded a few days before, and was the first recorded point after the clean installed XP. I rebooted the XP system. Wallpaper loaded with white cursor, but NO start menu or desktop icon. A message appears saying "Explorer.EXE Application error, press OK to exit the application" or something very similar. Did not write the error code, but can get if necessary. If I press the OK button (which is my only option), there is still no icons on the desktop or the start menu. Only the cursor. No access ALT + CTRL + DELETE or something like that.

  Thinking about completely wipe the system and reinstalls the operating system. Any suggestions before I jump in this solution?

  Explorer.EXE error after the Restore Point of ERD Commander. Dell Inspiron B130. Recently clean installed XP SP2 on laptop. Installation of SP3, to 50%, battery dies the laptop right in the middle of the installation of the SP3 update. Restarted, XP starts with black screen with cursor only. ERD restart order and restore XP to the last known good config (I choose point immediately after XP clean install). Reboot to XP. Now the wallpaper shows as well as the error message saying "Explorer.exe Application error, click OK to exit Explorer" dialog and then I can't access anything. Any ideas?

  Hello

  What is the full and exact error message?

  Step 1: Check if you are able to boot into safe mode without any problem. If you are able to boot into safe mode without any problems then try to perform the clean boot to safe mode. Also disconnect any external devices connected to the computer.

  Reference:
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Step 2: If you are still having the same problem, then you can the steps at the bottom of the article.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• . Notes being removed after the script is run?

  I wrote a script to allow you to select an image to replace any number of selected files.  Each file starts as an image embedded with a .note to determine where the basis of alignment for the new file should be (that is ' top', 'down' 'left', 'right').  You will find the code below:

  #target illustrator

  If (app.documents.length > 0) {}

  var docRef = app.activeDocument;

  var docSelection = docRef.selection;

  * Download the new file

  newFile var = File.openDialog ("Select a PNG file", "PNG files: * .png ');

  * Elements of image process

  for (i = 0; i < docSelection.length; i ++) {}

  If (.) TypeName docSelection [i] == "RasterItem") {}

  var Ancien_fichier = docSelection [i];

  * Replace the old image with the New

  replaceScaledImage (oldFile, newFile);

  }

  }

  }

  else {}

  Alert ("open a document before running this script";

  }

  function replaceScaledImage (oldImage, newFile) {}

  Save the old image data.

  oldImageScale = oldImage.matrix.mValueA;

  oldImageLeft = oldImage.left;

  oldImageTop = oldImage.top;

  oldImageWidth = oldImage.width;

  oldImageHeight = oldImage.height;

  oldImageNote = oldImage.note.toLowerCase ();

  oldImageNote.replace (/ \s+$ / g,' ');

  Martine var = docRef.placedItems.add ();

  newImage.file = newFile;

  newImage.move (oldImage, ElementPlacement.PLACEAFTER);

  newImage.width = newImage.width * oldImageScale;

  newImage.height = newImage.height * oldImageScale;

  Set the positioning on point pre-caducite.

  Switch (oldImageNote) {}

  case "down":

  newImage.left = (oldImageLeft+(oldImageWidth/2))-(newImage.width/2);

  newImage.top = (oldImageTop-(oldImageHeight/2))+(newImage.height/2);

  break;

  case 'top ':

  newImage.left = (oldImageLeft+(oldImageWidth/2))-(newImage.width/2);

  newImage.top = oldImageTop;

  break;

  case "the left":

  newImage.left = oldImageLeft;

  newImage.top = (oldImageTop-(oldImageHeight/2))+(newImage.height/2);

  break;

  case "right":

  newImage.left = (oldImageLeft+(oldImageWidth/2))-(newImage.width/2);

  newImage.top = (oldImageTop-(oldImageHeight/2))+(newImage.height/2);

  break;

  by default:

  newImage.left = (oldImageLeft+(oldImageWidth/2))-(newImage.width/2);

  newImage.top = (oldImageTop-(oldImageHeight/2))+(newImage.height/2);

  }

  Incorporate the new image.

  newImage.embed ();

  Add the footnote to the old image with the new image.

  newImage.note = oldImageNote;

  Remove the old image.

  oldImage.remove ();

  }

  For some reason, the ".note" added at the end of the script gets erased once the script has finished.  I can get it even to confirm that it applies the note to the image, but once it is complete, it's gone.  Any ideas as to why?

  Thanks for any help in advance.

  documentation:

  embed() method returns Nothing.

  What it does

  Incorporates this art in the document. Converts objects of art art point as needed and deletes this object.

  so...

  After the incorporation, Martine gets deleted and created a new RasterItem, the note is added to a now non-existent element and the new RasterItem is left without a note.

  a way of working that this point would be to postpone moving the Martine (only to get easy access to the newly created RasterItem) after it was integrated and note has been added to it

  // newImage.move( oldImage, ElementPlacement.PLACEAFTER );
  .
  .
  .
  newImage.embed();
  var newRaster = docRef.rasterItems[0];
  newRaster.note = oldImageNote;
  newRaster.move( oldImage, ElementPlacement.PLACEAFTER );
  oldImage.remove();
  

• Error after the DDL script loading

  Hi all
  
  I am running Oracle 10 g on my machine. I have create an ER diagram in Toad Data Modeler, which includes all the keys, constraints etc..
  I generated a DDL script that I want to biuld my tables with Oracle.
  
  I loaded the script using SQL DDL * more calculation sheet and there is no problem.
  I then tried to insert test data in my tables and I get an error code:
  
  ORA-00942 table or view does not exist.
  
  
  Now, I know that the tables have been created and also check with the dictionary of data using
  
  Select table_name
  from user_tables;
  
  TABLE-NAME
  =========
  Table1:
  Table2
  Table 3
  .
  .
  etc.
  
  
  It shows then all 20 of my paintings, as shown above. I use a Visual Basic front-end and I can see all 20 tables that are listed with the names of attribute for each table.
  So guys, where wrong me?
  
  Thanks in advance,
  OracleTechie

  Log in as a SYSADMIN & problem SQL below

  Select * from 'customer '.

• After the server running for a period of time, get connection errors

  Hi all
  
  We meet a few serious problems during the performance tests.
  Its does not occur with WebLogic 10.3 and does not occur with connections of type oracle.jdbc.driver.OracleConnection.
  
  After the test, the server fills up with the following exceptions...
  
  < 9 October 2009 15:34:17 IST > < WARNING > < JDBC > < BEA-001129 > < receipt exception creating connection to pool ' jdbc/sdoPool': IO exception: the network adapter could not establish the connection >
  
  
  Here is the configuration of the jdbc/sdoPool:
  Driver class name: oracle.jdbc.OracleDriver
  -> Properties
  user = SOL_ISMART_USER
  Class = Oracle.JDBC.pool.OracleConnectionCacheImpl
  Protocol = thin
  Initial capacity: 1
  Maximum capacity: 100
  Capacity: 1
  Delete the infected connections
  
  
  
  Code to get the connection...
  DataSource data source = null;
  
  VR;
  {
  dataSource = (DataSource) ctxt.lookup ("java: comp/env/jdbc /"+ poolName ");
  }
  catch (NamingException only)
  {
  dataSource = (DataSource) ctxt.lookup (poolName);
  }
  
  Connection Conn = dataSource.getConnection ();
  
  OracleConnection vendorConn = (OracleConnection) ((WLConnection) conn) .getVendorConnection ();
  
  vendorConn.setClientData ("LOGICAL_CONNECTION", conn);
  
  Return vendorConn;
  
  
  Here is my code to close the connection...
  If (con instanceof OracleConnection)
  {
  If (((OracleConnection) con), .getClientData (C_LOGICAL_CONNECTION)! = null)
  {
  Connection logicalCon = (connection) (con (OracleConnection)) .getClientData (C_LOGICAL_CONNECTION);
  
  connection - defense against leaks of output connection
  (Con (OracleConnection)) .setClientData (C_LOGICAL_CONNECTION, new Object();)
  
  logicalCon.close ();
  logicalCon = null;
  
  con = null;
  }
  on the other
  {
  con = null;
  }
  }
  on the other
  {
  If (! con.isClosed ())
  {
  con. Close;
  }
  }
  
  
  
  Any advice / help greatly appreciated.
  
  Ronan

  The DBMS does not give new WebLogic connections when running. Try to set
  the initial capacity of the pool to 35 and the login delay to 1, so the pool
  makes 35 connections at startup, one at a time, with a delay of 1 second
  between each of them. (The DBMS can sometimes get overloaded if it becomes too
  connection requests in a short period of time and don't miss some people).

• List of errors in the scripts of VI

  Is it possible to see the list of errors to a VI created by the script of VI? The same preference list of error do you get when you press a button to run broken.

  If a VI is created, but no executable, you get an error 1003 ("LabVIEW: The VI is not executable...") ") when you try to run it. But it does not specify what the problem with VI.

  Now, I have to manually open the VI and check whats wrong. Y at - it another option?

  Here's the method.

• I get this error after the last update WindowsUpdate_80200053

  I have the 64 bit version of vist home.

  After the last patch of weeks

  "Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x 64

  "Download size: 25,7 to 82.7 MB.

  I get the error WindowsUpdate_80200053. Also now I can't download active x controls, updated maleware deleting files (Spy bot s & D gives check sum errors), any web site, including the Microsoft Update download (I get warnings of the author is unknown and corrupted file warning.)

  My wife has the 32-bit version and having the same problems.

  Hello Stdonitus,

  Please try the steps, in order to verify if there is no virus or Spyware issues below.

  1. run the Microsoft Windows malicious software removal tool

  2 download, install, update and run: (freeware) SUPERAntispyware and Malwarebytes' Anti-Malware (freeware).

  3. run this analysis online (safe mode with network, if possible):
  http://OneCare.live.com/site/en-us/Center/howsafe.htm

  4 see and follow carefully:
  "Looking for / help with software, spyware software malware and Hijackware.

  If you need help with virus-related issues, contact the Support Services Microsoft product.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  If you need more assistance for the position of virus/worm to the Microsoft Newsgroup - security - virus.
  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Security.virus
  Via the Web:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Security.virus

  I hope this helps.

  [If this post can help solve your problem, click on the button 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Launched AFTER the script that launches InDesign startup scripts

  Hi all

  I m using a script that, in some cases - when the application is closed-, launch InDesign.

  The problem is that this script uses a variable set in startup, but it s undefined scripts.

  I tried to test (variable == undefined), to protect the script logic, but they almost always have an accident with an "undefined" error (?).

  It seems to be a timing problem between the two scripts that run at the same time.

  You have an idea on how to solve this problem?

  Is it possible to give absolute preference to startup scripts?

  Why does not no comparison undefined?

  Concerning

  If (typeof variable == "undefined") {}

  No variable...

  }

• What can I do if the script runs faster than the network?

  I wrote a script between applications moving to InDesign, where he begins to AppleScript, to Photoshop, which AppleScript runs a JavaScript script to perform various tasks.

  It works beautifully on my laptop at home where I do my development. Yesterday, using me as a Guinea pig, I tried it in the office.

  On the third round, I was horrified to see the ExtendScript Toolkit pop up with an error message (about as welcome to see an AppleScript script, asking the user to open the Script Editor and fix a script).

  The error message was that app.bringToFront (); was not a valid function.

  This was the case in InDesign, which has a different activation function, and I realized that, even if my AppleScript called Photoshop activate, I was still in InDesign.

  The app.bringToFront JavaScript was so called because I had joined my code in the model of Tranberry.

  So I pressed the button stop on ExtendScript, returned to InDesign and represented the script. This time he worked as usual.

  Occasionally on our network we spend some time beachball - watch as a communication happens in the background. So I guess the time wherever the error was thrown was on one of these downturns in the network.

  The passage of InDesign, Photoshop is not happening pretty fast, but the script has run and has issued an order Photoshop JavaScript while I was still in InDesign.

  In AppleScript this unhappy communication with users can be avoided using blocks '... try error'.

  Is there an equivalent of the error handling in JavaScript that would allow me to avoid being tossed in the ExtendScript Toolkit and give them a friendly message to apologize, explaining what had happened and inviting them to try again?

  JavaScript has try/catch blocks

  try {}

  app.bringToFront ();

  } catch (e) {}

  error handling code

  }

  Or you might be able to use an if statement

  If (app == 'photoshop') {}

  app.bringToFront ();

  } else {}

  app handle not photoshop

  }

• Firefox cannot display normal characters after the second run

  After loading windows, I can run firefox normally, but after the closing and opening of firefox, it shows normal characters in the menu and the text in web pages, in the form of rectangle.
  I have try shift + open and turns off modules and selected the check all box and restarted firefox, but the problem exists. even the most recent version completely uninstalled, and installed, but no income.
  the only solution is lunching without failure or restart windows.
  This problem is started after a system full scan with avira antivirus.
  screenshot

  You can try setting the Boolean gfx.font_rendering.directwrite.use_gdi_table_loading false pref on the topic: config page.

  • http://KB.mozillazine.org/about:config

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

• Lenovo A1000-camera error after the last update

  Yesterday, I received an update notification. My mistake I didn't take more notes on what was this update, but I have the idea that it was on the build. After that, the camera back fails to start and give an error constant. Someone had a problem simiral or any idea of solution?

  1 million thanks in advance

  Today, after the update, finally the camera work. Thanks, LENOVO.

• "You have to format the drive" error after the use of USMT through an Esata cable

  My company migrate to Win 7. We use the USMT to capture state powered hard drives Lacie user, putting on our image of Windows 7, then restore the capture user. However, the other day I was in a laptop computer with an Esata port, so I used it on the usb port. Then when I tried to boot from the disk and mount the image, he said "No BONES on the disc" so I went back in windows was watching the drive to make sure it still worked and, all the user data was their. Then I put on the side, fell on the image from another drive (wipe and load method) but when I went to restore from the first disc "you must format the disk to use" you will see. and it appears on each computer in the plug in.

  This happened also another technology that happened to try Esata instead of USB. This is a nightmare that could cost me my job if I don't get figured out. I am running facilitated us data recovery Assistant, who finds some 9 500 files on the disk, but it will take 22 hours to complete. And I think that he has a simple solution, I don't see. I think that the Esata some how made specific to this laptop drive at the time.

  Any suggestions or responses are greatly apperciated.

  Hello
  The file system on the drive may have a problem.
  Try running a disk check to check for everything on the hard drive:
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
  Hope the helps of information.