.png transparency problem with the underlying layer control

Similar Questions

• Problems with the new layer

  CS6. Installed Cs6 on a laptop, when I have a mask layer and want a new layer (control / alt and j) but it creates the new layer with the previous layer mask. With my office (control / alt / j) creates the new layer (no layer mask)

  If all you want is the current contents of the layer, you will use three shortcuts... (Ctrl + A Ctrl + C Ctrl + V). Those who would choose the hidden of the currently targeted layer visible content. Copy the pixels selected in the Clipboard. Paste it into a new layer containing the copied pixels. You can use Shift + Ctrl + C, if you want that the composite of the layers visible or visible layers of timbre Shift + Alt + Ctrl + E.

• Problems with the help of control Edit Expression with tab control

  Hi all

  I am facing a strange problem when using Expression Edit Control with a tab control.

  When I put the Expression of the RichEdit controls on several tabs in a tab control, and when I run the application, the Expression Edit controls in a single tab are visible, others get invisible! I do NOTHING with them, but they do not simply show upward!

  I first faced this problem using Expr editing controls in Visual Studio c#. NET - with tab controls. For verification, I created a simple VI is LabVIEW to see if the problem is with my request / problem with Expression Edit controls in c#, etc. But voila!  A similar behavior in LabVIEW too! 

  I'm doing something wrong? OR do not do something right? Ask someone for help please ASAP!

  Thanks a ton in advance!

  DASI

  PS: Attached the VI here (LabVIEW 8.5) just download and run it, and you will see probably what I'm talking about!

  
  

• Problem with the task of control of model code - execution instance remains open

  Hi Experts
  
  We have some model mappings, for which we use some similar code with the model code BUILT_IN_CT model. Mappings to run successfully, but the task of control of model code seems to remain open. It's the same thing, even if I use the code model of control by default BUILT_IN_CT/CCT_ORACLE.
  
  To see if the control task remains open, I run the script...\dbhome\owb\rtp\sql\list_requests.sql, and I get the following output:
  
  ====================
  EXECUTIONS
  ====================
  ID of the audit. State of... Name... Date of... Owner...
  16_FLOW_CONTROL LOAN 260573 19 APRIL 11 10:15:16 OWBSYS
  
  As a solution to the problem, we managed to implement a custom task jdbc, in which we are to pick up instances of this task and then close them using the owbsys.wb_rt_script_util.deactivate_execution procedure.
  
  Anyone know the reason for this problem and if there is a solution for it, other then to implement a custom task to close the open instances?
  
  We use OWB 11 GR 2 on Windows.
  
  THX
  Your help will be much appreciated

  Yes, I see now the verification element hanging out in OWB, this looks like a bug in the OWB audit management, it should not be suspended. I don't think impact on behavior, he is a piece of dangling audit data that should not exist. You can raise a bug/SR?

  See you soon
  David

• Problems with the buttons that control the volume

  Hello everyone I hope you can help me. I had to reinstall the system on my laptop, everything is ok except for a problem, the software that controls the volume buttons are not displayed. If the work on screen, but I can't see if the volume or bass.
  Could you tell me what might happen. Thanks and forgive the inconvenience.

  Hi all I have solved the problem, as I'd mentioned the error is when you install the drivers and the order in which they are installed.

  First of all, install the file shortcut (8jvu20ww.exe)
  Once installed, you will be prompted to restart the system. Do not.
  Then install (g1ku20ww.exe) power management.
  Reinicir system and the problem is solved.
  A welcome message.

• I have a problem with the user account control restricting printing.

  Original title: problem of UAC Restriction...

  In fact, this problem only occurs on Windows 7 / Vista including our field is now progressing to it. The problem is that we still use an OLD way for ourselves print documents by a former software which will form the LPT port. We used to map the BP turbine as: "net use LPT3: \\print_server\printer / persistent: Yes.

  EVERYTHINS works correctly, the fact is that we can mount the printer on LPT port, but we cannot print on it. The only way we found to make it work is by disabling that turned off.

  Is it possible to change this and to let any user print to an LPT port, even if UAC is the highest value?

  I thank you for your answer and have a nice day!

  In fact, was how I managed to solve this problem by defining the rights for users to C:\Windows\system32\spool folder on the print server.

  In this case the UAC asking for something.

• Problems with the 'levels' of control... it is

  After I move the sliders levels (black, gray, white) and the preview looks good, I click OK and the image returns to its pre-set state.

  For example, I try to gray to black in a jpg of a design, and it looks great in the preview but drops back to its original state after accepting the previewed change.

  I know that there must be something I'm not set up to do this, but I don't know what!

  Any help will be appreciated.

  I use PS CS5 with Mac 10.9,5

  Thank you.

  Yes, looks like some bad adjustment needs are engaged.

  You can try to reset the Photoshop preferences. Here are the steps:

  1. quit Photoshop

  2. open Finder

  3. click Go (in the menu bar), and choose go to folder

  4. type in ~/library and click on Go.

  5 open the folder Preferences

  6. move the Adobe Photoshop CS5 Settings folder on the desktop.

  Otherwise, you can follow the steps in this article to restore preferences:

  Using Photoshop | Preferences

  Then, re - open Photoshop and try to add levels.

  Let us know if that helps.

  Kind regards.

• z index / layer of problems with the new YouTube widget!

  Hello!

  I am facing a problem with the new 'youtube' of social media widget. I currently have two layers in my projects. This is a project for which the menu scrolls initially and then sticks to the top of scrolling parallax. By continuing to scroll, the embedded YouTube video widget does not scroll under the menu as it should but scrolls through the menu. It's strange, as the YouTube widget was placed on level 1 and the menu is at level 2. Shouldn't the menu then always be on top? Only the new widget is not properly defined index-z?

  You can check my web project (and look at the code) here: http://www.firstlight.at

  Any help is greatly appreciated!

  I managed to solve the problem, and I believe this to certainly be a bug in Muse...

  In order to avoid widgets Youtube iframed swim on top of all the other div tags, I had to change the code, add wmode = "transparent" and wmode = "Opaque" to the class of the iframe. This works if you replace all the other parameters behind the CBC "&" by "& amp"tag.

  Here's the original code generated by Muse. This could not prevent my "2nd layer" slip below "Layer 1".

  Makes the following changes to the code, forced the Youtube widget below all other div again (I pinned all changes to "BOLD", so you can see the changes easily):

  Ensure that you do not miss the following change: you need to change all of the vipers '&' to '& amp' this procedure will not work!

  After the new version, I'm sure the Adobe team is working hard to bust of bug last version. But I hope that we will be dismantled soon, otherwise users using the youtube widget will have to recode output Muse whenever we make a change and it is exactly what is the Muse striving to prevent (; After all, in Dreamweaver, you can hardcode the change and he would stick!

  I hope that it will be useful to someone!

• Problem with the first pro effects controls

  Hi, Merry Christmas;

  I have a problem with the keys with the opacity effect in the effect controls panel. the following pictures I think make my problem more clear to understand:

  

  The picture above shows that the opacity of the element of gopro correction control is 100% unless I drank too much champagne, or fully visible on the screen!

  I want to do a transition effect showing the raft, which appear in the window of the following image, which is an Indian granary above the Colorado River.

  My video of the attic I zoomed up to the window they give the impression that enter the attic when I arrive at the moment I start, with keyframes to have

  inside of the attic without an opacity of 100% to 0% at the end of the clip attic. Unless the new champagne is very bad for my health and vision, I would then see the river

  and the raft! Well I did not and it gives me nightmares! What is the problem? I add that having a zoom smooth and regular, I used the effect time remapping in the video for attic.

  The clip of attic is just above the clip from gopro correction and he overlapped by the duration of the selected dissolution of the shown in the image below (I could of course use a resolution here, but I want to save money on an additional effect)

  

  Here is the view with the screen and the opacity of the element of attic at 25%. Normally, the clip of the raft must be visible then! the orange-red to the right of the screen is inside wall of the attic!

  
  

  

  Thanks for your suggestions... Claude

  Sorry guys, I found the reason. My fade is too short! I had put 2 "to fade and seems not sufficient due to the element of the upper layer time remapping effect! Sorry for the inconvenience.

  Claude

• Problem with the volume on Satellite Z30 control - A

  Hello

  I have a problem with the analog output sound on my A - Z30 (internal and line/headphone speakers). If for example I play music I see a clearly weak signal volume on the fader control of volume in my Win 8.1 source volume control. But on the master fader, I get a completely saturated and distorted signal. Even down to the time source and output does not help... it just sounds horrible.

  See: link: [https://dl.dropboxusercontent.com/u/30325547/SoundProblem.jpg] (sorry, it's a German system)

  Here we can see that the (extreme right) music player delivers a signal of low volume, while the master fader (left) receives a 100% volume distorted signal.

  If I use external speakers that connect via USB (Logitech Z305) it works perfectly.

  I have already uninstalled and reinstalled the latest version of the drivers for my sound card. But this problem is very persistent. It seems that something pulls the signal up, but I can't find any control that turns off.

  I'm not completely sure when that started, but it can be connected with the beginning of the use of a USB headset. But I already uninstalled this software once again, but that did not help as well.

  Any idea?

  Thank you very much

  PHILIPPE

  Hello

  According to the specifications of the laptop and drivers available on the Toshiba driver page, this laptop supports the Realtek sound card.
  That's why the Realtek HD audio Manager software should be available in the control panel.

  Realtek HD audio Manager provides different parameters as well as the speaker of the configuration options to get the best sound performance.

  In addition, computers laptop Toshiba are preinstalled with a sound tool DTS/Soft
  This software provides audio improvements in your computer.

  To be honest, I not quite sure what which could affect your sound volume, but the mentioned tools and configuration should be checked permanently m.

• Problem with the controls volume/internet on my laptop HP HDX 16

  Hey,.

  I have a laptop of HP HDX 16, around the age of 8 months. I keep having problems with the touch buttons that controls volume, bass/treble and the internet. The buttons randomly disappear by themselves, turn on and off Alternatively my volume/bass/treble from top to bottom and my internet.

  I have updated the drivers for the buttons to quick launch without result. I've also just updated my computer to Windows 7, so my Bios is brand new (the problem started before I updated to 7).

  As you can imagine, get my internet randomly stops and for the black volume screen blocking what I was doing and hang my computer is getting pretty annoying. Any help on this would be surprising.

  Thank you
  Printertron

  I also have the same problem. HDX 16, around the age of 3 months.

  I found to do all sorts of updates the driver, uninstall, System Restore (no), and does not help.

  I'm still on Vista, but when I get my kit to upgrade to Windows 7, I had planned to see if it resolved the problem.

  Technical support HP told me that if a recovery does not resolve the problem, it must be delivered to them, and the band of totality quicklaunch may have to be modified.

  I intend to make the recovery during the holiday season.

  Based on the fact that you got your computer 8 months ago, I assume that you have not used an upgrade kit. Which means, I would recommend doing a recovery before calling the technical support because they will just have to insist that you do anyway.

  An interim solution, when the volume control locks your screen is at the end of the process called "SmartMenu.exe". It will reload the next time that you start your computer.

• Problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  Am having problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  * original title - I'm having a problem *.

  You have the latest drivers?
  http://www.nvidia.com/page/support.html

  Aero - Windows 7 - How to troubleshoot problems with Aero

  (1) first of all, click on the Start button and type in Aero. Now, click on find and fix problems with transparency and other Visual effects of link.

  (2) a new Wizard dialog box opens. Make sure that you click Advanced to solve all problems automatically.

  (3) either the problem will be solved or not. If this isn't the case, you will get a list of items that are potential problems.

  (4) If you want to see more details about the problem, you can click View detailed information. This will give you a list of potential problems that have been verified and those that pose problems.

  If it does not---> click Start---> right click computer---> click Properties

  Click the link for 'Windows performance index' and then click 'rerun the assessment"to refresh your WEI score and try again.

  Note: If you have Windows 7 Starter, or if your system does not meet the requirements for Aero you will not be able to use Aero.

• Problem with the levels in PSE7 adjustment layer

  Hello

  I have a problem with the levels adjustment layer in PSE 7.0. I made this photo that shows exactly as I want it in PSD format, but when I save it in JPG format all adjustment layers are lost. I tried to get the same result by using simple Enhance > > adjustments > > levels, but I cannot get the same result with the same settings as with the adjustment layer.

  How can I solve this?

  I saw in a tutorial that might help add a new layer above the layer of setting and then merge visible layers, but it does not work either.

  I hope someone can help me if I can complete the picture.

  It seems that the problem is that your image size is big enough in comparison to the size of your available screen and you make your settings at roughly 18% view.

  Photoshop elements uses interpolation to show the images on the screen, so you can't really see exactly the result unless you view an image at 100% display (actual pixels)

  If you try to do the steps from the beginning with your image at 100% view, does make a difference?

  (Double-click on the Zoom tool in the Toolbox for 100% view (actual pixels))

• Problem with the mobile Flex list control

  Hello world.

  I have a problem with the list control in Flex mobile.  I need create list in "Flex mobile" and I need that list items must have following structure. a single image, text and then another picture. How do I do this?

  Concerning

  Include a component with a custom converter.

  See the documentation for Flex: http://help.adobe.com/en_US/flex/using/WS03d33b8076db57b9-23c04461124bbeca597-8000.html for more details.

• Problem with the Quicktime controls, native

  I have a small question just to see if anyone else has had this problem.
  
  I use the product animation DVD Director, generally I use scripted rewind, fast forward, etc. buttons to order movies. A guy asked me to use the native controls of Quicktime instead, but when I check for them to show, it blocks the program. Now, I know that I was able to do this before, but now I turn... What is happening in the 9, 10 AND 11. I used 11 but I downgraded to an earlier version to see if I could do it in the previous version but there it is in all versions. I was able to do before the 9 and 10.
  
  the only thing different than before are that I have 11 and a new computer, but cannot think of any reason why this would be a problem.
  
  anyone has this problem with the Director shuts down when you are trying to activate the native quicktime controls? no idea why he would do this?
  
  Thanks for any help you might be able to provide...

  Are you on Mac or PC?

  It sounds like a conflict of driver - I can activate the controls in D9 and 10 with QT to win 7.5.5. Have you tried another computer?

  HTH

  johnAq