New XPS 8700 has Windows 8 loaded on the bad hard drive

Similar Questions

• How to set up the new HP laptop with the bad hard drive notebook

  Children a new Hp laptop in June.  The hard drive has been getting gradually stronger and is obviously about to go, with a blue error screen forcing a roll back of the computer.  I did a full backup on an external hard drive and I'm back for a replacement.  Should I make a recovery disk and reinstall from the disc when I get the new laptop, or should I just plug the external hard drive and transfer files via?  A guy at work said using the recovery disk is the way to go, because it would be to reinstall Norton and other programs, we have installed., but I thought that backup external hard drive was supposed to be the way to do this

  Because you have found a replacement of mobile complete, it will be installed on the 'old' came with.

  If you have installed a new programs, games etc_then Yes restore the Image would be the best way to get back it quickly. This would assume that the replacement is the same model or very similar from a Image Restore the drivers also which should match the material of the machine.

• Difficulty to install Windows XP because of the missing HARD drive driver

  Hello

  I recently bought a P200-1 and I try to install Windows XP instead of Vista.
  I bought Windows XP Home Edition. Installation was first arrested for lack of HARD disk drive.
  Classic message: «Setup didn't find any hard drives installed in your computer»
  I downloaded Toshiba support "Intel Matrix Storage Manager" (pilot: ICH8M_32bits).

  The contents of this directory was extracted to the root of a disk.
  I restart my PC with XP CD-Rom and floppy drive connected. Setup download SATA AHCI floppy driver (press F6, and then later S key).
  The installer can read disks and partitions and offers the choice of a partition for the installation of XP system.

  After you have selected a partition, the installation begins and the installation program asks to insert "Intel Matrix Storage Manager" in drive A.
  Here's the problem: floppy drive not responding, disk is not read and XP installation stops.
  Ask for a second time to insert the floppy is suspect because he thought the driver drive HARD has already been read successfully.

  What can I do now?

  Thank you for your help

  JR

  Hello

  The problem might be that you have formatted the HARD drive (partition) or created a new partition after the installation of the Intel Matrix Storage Manager.
  In this case the formatting removes the driver from the HARD drive.

  Another possibility is the use of software called nLite. This software allows to include the SATA driver in the XP installation CD.

  Simply search for nLite and you will get lots of useful details.

  Greetings and good luck

• Re-installed Windows 7 Home Premium, because I had the bad hard drive.

  Well, I didn't not on jelly bean or checking registry before you have the hard drive replaced. My windows product key is on bottom of laptop, but after a few wear some letters are hard to distinguish. Any ideas on what I can do to recover the key. I probably have more than 90% of the letters. There are only 3 letters I can't make out more substiuting I tried the letters that are used with the key. Please tell me that there is something.

  Hello

  In these Forums, it is often recommended to use a magnifying glass and a flashlight to see if you can read the numbers of the product key on the label.

  Or as one poster suggested, take a photo and enlarge.

  You can contact the manufacturer of your laptop, if the operating system has been pre-installed and ask them to send you a set of recovery disks and to reinstall the operating system.

  They should do this for a small fee.

  The relocation method above does not normally allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.

  See you soon.

• Operating system does not load unless the 2nd hard drive is in.

  I have 2 installations of windows 8 (one in each of my 2 hard drives). The hard drive is almost broken, but it seems that if I unplug it I won't get a screen asking me which operating system to load from. I want it so I have 1 hard disk whereas my os works can start. How to do this?

  Looks like all the boot information on the main active hard drive. If this drive is not available, then the other operating system is not available. Reconnect the drive which can boot into Windows 8 and create recovery media that allows you to recover the drive which is not booting:

  create a repair disk:

  http://winsupersite.com/article/Windows8/Windows-8-tip-create-recovery-media-144098

  Boot from the recovery media that you create.

  (a) in the screen install now

  (b) click on repair your computer

• Install Windows 7 Pro on the second HARD drive located in Optibay

  Hello

  I have a 2009 15 "MacBook Pro C2D 2.66 with 8 GB of ram and a 480 GB SSD as my main drive. I will be to install a secondary HARD drive in the optical Bay. I want a 250 GB partition for a boot camp and 750 GB partition which can be read by OS X and Windows. 750Go partition will be used mainly on the side of the OS X to store photos, movies, music and documents but would be like training camp to access incase I need a file or two. I have already twisted boot camp to allow a windows usb installation and wonder what to do next steps are. I have read several forums and it's possible but instructions on the forums seem to be a specific user. Thanks in advance.

  1. on your specific Mac, windows should be on the main drive Bay. It will be also problems to start.

  2. do not modify the Info.plist Bootcamp and try the USB installation. You spend hours trying and it will fail.

  3. you must use the internal optical drive, integrated to install Windows on the main drive Bay.

  4. Once Windows is installed and fully functional, you can then replace the Optibay drive.

  5. do not throw your optical drive. If you need to repair Windows, you will need to return to the standard hardware configuration.

  6. you can have problems even under normal circumstances with a dual Setup, so be prepared for adventures in such a configuration.

• copy pictures and videos to windows photo gallery to the ice hard drive. But an error message if poster - don't let me copy videos. He said then I can cancel or skip... What can I do? you need to free some drive c. help! Thanks in advance.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I have a lot of space on my hard drive, I have windows Vista. I am trying to download images to a flash drive. I did in the past without problem, I get a error code 0 x 80070052 and I can't know what it means or what to do to solve my problem. Can anyone help please.

  ===========================================
  Just a thought... maybe you have too many files in the directory root
  the flash player. Might be interesting to try to create a few folders to
  contains the files. Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• External hard drive does not work on windows 7 after using the external hard drive on a mac (osx 10.7)

  title says it all. It does not open on autoplay and does not anywhere, but is always works on mac

  http://www.Mediafour.com/products/MacDrive

  If you want to use the drive to read and save files on both mac & PC I think that you will need create separate partitions on the disk, a formatted for mac and one for the PC.

  The utility linked above only allows access to a mac formatted drive and access the data, having never had to use it I don't know if it allows you to save files PC to the mac player

• the internal HARD drive has been corrupted and I fails to make the back upward. need information.

  I've owned an HP Pavilion dm1-LQ862PA #UUF, used to be windows 7-64 bit. the internal hard drive has been corrupted and recommended to replace another. they were asking for the backup cd and I failed to do, and I do not regret it. Well, except to lose all my files and programs that I installed, it will also include bluetooth, wi - fi and other important built in programs? I'm not a computer expert. If ever these important programs had totally disappeared, how retrieve it? my laptop in an HP authorized service center will be probably expensive and I decided to buy a new HARD drive and ask someone to put it in and install a new OS. Please help thanks

  Hello:

  There is a support for your PC page where all the software drivers to run the hardware on your PC such as bluetooth and wireless can be reinstalled.

  http://h10025.www1.HP.com/ewfrf/WC/product?product=5079502 & CC = US & DLC = in & LC = on & query = LQ862PA & Tool=.

  What I don't see is the availability of recovery disks to reinstall the operating system (windows 7 64-bit) or your PC programs (other than those listed in the link of support above).

  This means that if you want to replace the hard drive, you must make your own W7 64-bit installation media and use the 7 product key of Microsoft windows on the bottom of your PC to activate the installation.

  That assumes you can read all 25 characters of the product key windows 7.

  Here's how...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  The replacement hard drive should be a 320 GB SATA II 5 400 rpm Disk If you want the same specification provided with your PC hard drive.

  Please refer to Chapter 4 of the service manual on the link below for the procedures for removal and replacement of the hard disk.

  http://h10032.www1.HP.com/CTG/manual/c02666702.PDF

• Dual-boot Windows XP is installed on the external hard drive

  My computer has Windows XP and Windows 7 installed. I added a hard drive with Windows XP is already installed on the computer.

  In order to access additional hard drive, I need to change the priority of the hard drive in the BIOS.

  Is it possible to add a boot option to the Boot Manager screen so that I can boot from the additional hard disk without modifying the BIOS settings?

  First of all, to the best of my knowledge you should not change anything in the bios to access the external drive.

  Second, if Xp has not been installed on the external hard drive while the drive is connected to the computer in question it will not be loaded. Simply, it does not work like that. Even if you install Windows on the outside when it is connected to your computer, I don't think it must configure the boot.ini file, giving you the ability to dual boot when the computer is turned on. You can boot from the external drive provided however your bios supports booting from a usb key. I think that to accomplish what you want, you will need to remove the hard drive of the external envelope and attach it to your computer using an eSATA cable. Then it will be recognized as a regular system disk.

• Add the old computer as as 2nd hard drive to new XPS 8700

  Hello

  My old computer - Dell Vostro 410 just stopped working so I now have a 8700 XPS.

  My problem is that there are some files on my old drive hard vostro that I need. He has been using Windows 7 and the hard drive, I have upgraded to a Western Digital Black Caviar 1 TB SATA.

  But the new '' runs on Windows 8.1.  I can't upgrade the old hard drive to the old computer died. Someone at - it ideas how I can get my info from my old to my new drive?

  I tried to install the old disk until the 2nd hard drive but the system does not recognize it.

  Any help would be welcome.

  Thank you

  Hello and yes I have an answer.

  Also, I had a second drive win 7 ult and it went out to install in my new 8700 XPS thing is that I already formatted the disk to work to the point 8.1. He came to light, a UEFI system installed, may fail to start if a secondary drive is attached that contains logical partitions. Of course, this should be an MBR disk configured, but if it has at least one primary and one extended partition, it will stop Windows 7 and Windows 8 start.

  To correct this test facility 2nd main drive, then use a boot disk to get the computer running then access the disc to remove files.

• How can I transfer stuff that are installed on my laptop Windows XP to my new PC which has Windows 8 Professional about it?

  I bought a laptop Dell XPS with Windows 8 Professional pre-installed. I need to migrate things that are on my laptop Sony Vio - who has Windows XP Professional - for the new laptop. Transfer cable that Dell sold me for employment does NOT in Windows 8... Then, how should I proceed?

  Use the Windows Easy Transfer tool included in Windows 8.  You should be able to create a USB key that you can take your XP computer, collect files and settings and then bring them to the new computer.  See here:

  http://Windows.Microsoft.com/en-CA/Windows-8/transfer-files-settings-another-PC

• How to get to the BIOS on new XPS 8700?

  How to get to the BIOS on new XPS 8700?

  This is a brand new machine with Win 8.1, a SSD boot drive, etc.

  I need to get in the BIOS so that I can prepare for the recovery with Acronis backup program. This program will generate a recovery disk or flash drive. If my boot drive does not start, I will use the recovery point, but I need to have the BIOS first try to start from that before the C drive.

  Reading messages on the Acronis forum, I heard for the first time on UEFI - I barely understand what it is - but apparently, a replacement for the BIOS?

  Is it likely that my new machine has UEFI rather than a BIOS? and how do to it? Press a function button for the system to start? A person on the Acronis forum suggested to win 8.1 to restart and hold the SHIFT key while doing.

  I do not experiment on my PC unless I am sure it is the right method. This is my 4th Dell-all previous versions came with a manual that could give me the answer to a question like that.

  The "missing manual" is perhaps on the Dell website?

  Joe

  Your system is UEFI.

  As the UEFI systems start very quickly, you start typing (do not hold) F2 as soon as you power on open configuration. Otherwise, it will just start normally from the hard disk.

  Alternatively, you can start to type F12 as soon as you turn on that should give you a start with options menu to boot from the optical drive or USB. Note: To boot from USB FlashDrive bootable is connected before you turn on the system, otherwise it does not appear as an option in the menu of F12.

  See page 82 in the Manual.

• I can download windows mail on my new computer which has windows 7

  in windows vista, I use Windows mail, now that I have a new computer w/windows 7, there is no windows mail.  Can I download windows mail from my old computer and insert it into my new computer which has windows 7

  N °

  Windows Mail is not a separate download; It is part of the Vista operating system.

  Use Windows Live Mail.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• HD is dead on my Dell Inspiron XP SP3 transferred old 4Yr no external HD files. How to move files to my new computer which has Windows 7.

  I just bought a new Inspiron desktop computer that has Windows 7 on it. Many old computer files have been corrupted, however, I was able to save many audio, video, Real Player files, PDF and photo.  I exported my FireFox bookmarks to HTML for the external hard drive.

  I can't understand how to transfer all the information from my external hard drive to the new computer with Windows 7. My level of computer knowledge is advanced beginner. I'm sorry to ask such a simple question I minor dyslexia. However the video, I look at all speaks to move from one computer to another and downloading transfer program.

  Also, I can't put music in my music files, however, once I know how to transfer to my new Win 7 computer where would I put my Real Player downloads, Favorites Fire Fox, so they find themselves in the right place. I tried the Itunes file to transfer from the external hard drive to the new computer where I had downloaded Itunes and it did not work.

  I appreciate any assistance.

  Thank you

  Angel

  You can use the copy / paste command to copy your files from the external hard drive to the folders such as Documents, pictures, videos in Windows 7.

  When you copy and paste a file, you make a copy of the original file that you can then modify independently of the original file. If you copy and paste a file to a different location on your computer, it's a good idea to give it a different name, so that you'll remember which file is new and which file is the original.

  To copy and paste a file:

  1. Open the location that contains the file you want to copy.

  2. Right click on the file and then click on copy.

  3. Open the location where you want to store the copy.

  4. Right-click on an empty space within the location and then click on paste. The copy of the original file is now stored in the new location.

  5. Select multiple files or folders

     There are several ways to select multiple files or folders.

     • To select a consecutive group of files or folders, click the first item, press on and hold down the SHIFT key and then click the last item.

     • To select multiple files or folders that are near each other, drag the mouse pointer to create a selection around the outside of all the items you want to include.

     • To select nonconsecutive files and folders, press on and hold down the CTRL key and then click each item you want to select.

     • To select all files or folders in a window, the tool bar, click on organize, and then click Select all. If you want to exclude one or more items of your choice, press on and hold down the Ctrl key and then click on the items.

  With respect to the importation of your Firefox bookmarks, see the following topics:

  Import bookmarks - MozillaZine Knowledge Base

  With respect to the importation of your music in iTunes, see the following topics:

  iTunes: on add to library, importand conversion functions