PO: output for Communication.

Similar Questions

• How to check if "PO output for communication" uses XLM or OracleReports

  I need to change the purchasing document "Exit IN. for communication", but I must first identify if it uses XML Publisher report or reports of the Oracle.
  How can I check that using the client?
  
  Any help is welcome.
  
  Rodrigo

  Hello

  OK, here's what I did to customize the presentation of PO:

  1 create new templates in BI Publisher:

  1.1 Please download the original models:
  In my evolution, I used the original models of Oracle as a starting point. If you get their first:

  Logon with respo XML Publisher administrator and navigate to 'Models' > search model whose name "Standard purchase order Stylesheet" and click on it in the result of the research. Click the download link to download the file .xls on your local drive. You can repeat that for all other models that I mentioned earlier, depending on which layout you want to change.

  I do not recommend to change the original files. In case of problems you can always return to the original version of Oracle.

  1.2 now to create your own templates:
  In XML Publisher administrator, you can create a new template. As model name, use a meaningful name with a prefix such as "XX" or something that you usually use for your own developments.

  The rest of the fields in the template definition must be equal to the standard models (so just copy & paste the values from there). And you can download the original .xsl file to the beginning.

  2 let know to use your own XML Publisher templates:

  connection with a PO administrator/super user responsibility:
  2.1 (by purchase) > Setup > organizations > Options purchases > control tab > set "Output PO Format" = PDF
  2.2 (by purchase) > Setup > purchases > Document Types > find the 'Purchase order - Standard' Document Type > define the presentation of the Document Type = "XX purchase order Stylesheet" (put the name of your custom here template!)

  Repeat step 2.2 for other Types of documents, such as agreements to cover and if necessary press coverage.

  3. test:
  Now try the PO output for communication. If everything has worked, you should see a purchase order as a PDF with the same layout as before. Now it's time to start customizing the layout.

  4 customize the page layout:
  You must change the XSL templates. You need some knowledge of XSL - FO, but with some programming experience little, you will have the concept quite easily. In fact, the XSL - FO offers many possibilities to model your page layout.

  BUT: Change the XSL template to change your "LAYOUT" only, not the data of the report part. Of course you can text coded hard and calculations in your XSL, but dramatic changes of the portion of data are not really possible with this.

  If you want to do, then search on Metalink, there is a document that explains how to customize the data for printing of PO. I don't have the Note in his hand right now...

  BTW. XML Publisher is the former name of the product, Oracle has renamed it BI Publisher. In EBS, it is still often referred to as "XML Editor". You can see the two names as synonyms. You pay more attention to the version of BI Publisher, which is integrated into EBS is different from what you can have as a stand-alone versions.

  Best regards
  David.

• customization of report output for Communication with rtf custom model-IN.

  Hi all
  
  I'm working on the output PO for Communication report purchase R12. I have to add a custom report template. To do this, I followed the steps below...
  
  
  (1) download the xml data file Standard to set data Source Data Standard purchase order (PO_STANDARD_PO.xml)
  (2) model rtf created, based on the data in the xml file that I had taken the definition of data
  3) has created a custom template for the definition of standard data with this provision of the rtf.
  
  (4) makes configuration changes in the tab control purchase and the purchase of Options of Types of documents.
  
  In the setup of purchase Super User RESP, I did the below configurations
  
  (a) organizations-> Purchasing Options - > output Format to the Document Format in the tab control in PDF format
  (b) procurement-> Types of documents--> and given of my custom here layout
  
  When I run this report ended with error as Exceptionjava.lang.Exception: error during PDF generation: null
  
  
  Please me advice how to proceed further or have you missed all the other things
  
  
  Kind regards
  Goussard

  for this, a patch is need to apply, we have applied the patch and problem solved.

  The metalink note I mentioned is * 1192234.1*

  Thanks for the update and for sharing the solution!

• Using "Exit IN. for Communication" at the exit just XML?

  Hello
  
  I'm redrawing the existing model of the XML editor used for the formatting of the PO and I was wondering if it was possible to get the output of a purchase order system .xml? I tried to change the output format of competing demand "PO output for Communication" to XML - but when it is run this again tries to generate a PDF file. Is there a way to get this XML output or this application stores its intermediate XML data in a temporary table?
  
  I go about it completely the wrong way?
  
  Any help to this much appreciated; I couldn't see anything on Metalink.
  
  
  Thank you
  Tim

  We do it:

  1. give the user Core Apps (which needs to be a buyer) to run concurrent demand "PO output for Communications.
  2. Once you have your purchase order, do not approve it_ - leave it as incomplete
  3. go in run a new query > PO output for Communication
  4. Enter the PO number and set: Print selection = gcnew, PO number = incomplete IN. you just created, Test = Debug
  5 the application
  6. in the end, the request will be error
  7. display the wrong job log
  8 do tools > print to open the newspaper in the browser
  9. scroll down until you find the tag. Start the copy from there (including this tag).
  10 stop the copy to the tag (just before begins...
  11 copy the selection
  12 paste the selection into a new text document, but put it in the first line:
  13. at the end of the text that you pasted in (last piece should say.
  14. manually type at the end of the text you pasted.
  15 save in an XML file.

  You can then use this XML to connect to XML Publisher...

  I have screenshots in a word doc if you would like to you.

  Of course, I'm also about 4 weeks late on this reply, then you've probably done the job and settled on something else now!

  EDIT: Sorry - just realised it's exactly the same thing as 364177.1 Note!

  Published by: jimr on August 25, 2009 16:19

• PO for Communication output

  Hi guys,.
  
  I'm working on a RTF model for the release of PO for Communication, but I need to add a column for tax (amount of recoverable and non-recoverable tax) and a total down.
  
  <? xdofx:RECOVERABLE_TAX + NONRECOVERABLE_TAX? >
  
  But how can I get a total of this column?
  
  I tried to use a rollup and displays the total final at the lower part, but that uses XDOXSLT and I can't use XDOFX with it.
  
  Did anyone done this before? I'm really stuck.
  
  Please help.
  
  Ash.

  I used the translate function to convert text in raw numbers that I could summarize and then in a variable values. I would also check that RECOVERABLE and NON-RECUPERABLE elements exist and take account of the values of the negative income tax (in parentheses).

  Hope that helps.

  See you soon,.
  Dave

• See this document in different IN. from the exit of the PO output for comm

  Hi gurus,
  
  I created to model costume for the seeded report output po for communication and the configuration of the type of document to point to my model. then I run the simultaneous program and it provides some power, but the customer wants a review so I have applied the changes they asked on my custom template and then run concurrent program again and saw that changes are now applied in the output, but when I tried to click SURVEY > view the document in the window IN. the output always use the unupdated of my custom template version.
  What should I do for that SURVEY > view the document will use the updated model.
  I use R12.
  
  
  Thank you.

  To remove the attachment for an existing purchase order, simply open the purchase order (with display) and see > attachments and delete it.

• How to change the audio output for the metronome

  Hello

  I would like to send the metronome (and speech signals) for monitors to the scene in the ear.

  I understand that I can do this in MainStage using different output for the above titles vs. the rest of the 'Concert '.

  I tried to follow the instructions of the Manual:

  Change the audio output for the sound of the metronome

  1. Choose the MainStage > Preferences > General.
  2. In the section of metronome on the general tab, choose another audio output on the shortcut menu to exit.

  PROBLEM

  1. on the general tab, only the outputs 1-2 are available/selectable (likely, these are also by default for all "Concert")

  2. Why is this process in the manual if it is not executable (without doing something to another additional Set up)?

  3. it's probably among the requirements of setting up more critical even easier for using MainStage with a live band, so why am I having to ask for help at all!

  Rant on (its been a long day)

  Grateful for any help to solve cela. I guess I can send the metronome (such as a click track) and speech signals on the same outputs, which are separated from the rest of the Concert... or should I change the outputs on the other tracks and keep the outputs 1-2 for the metronome marks / voice?

  Thanks in advance for all advice and my apologies for my frustration. JM

  To access the output audio, you need an audio interface with several outputs.

• That engine run time is necessary for communication series build Setup

  That engine run time is necessary for communication series build Setup

  You need NI-VISA. If you are using a National Instruments serial port card or device, then you also need OR Serial. All software can be found in the Technical Support page.

  Obviously, you have also the runtime for the software development environment itself as well. For example, for LabVIEW, you need to the LabVIEW Run-Time.

• How do the last 4 paintings of a loop output For?

  Hi people,

  I'm almost at the end of my home. I really hope that someone could help me please.
  Any input would be welcome. VI attached.

  Explanation of VI:
  I initialize an array.
  The random number generator simulates my entry camera.
  According to which iteration it is, the data are added in one of the four tables of output.
  "x - y * floor(x/y) ' gives a value of remainder of 0, 1, 2 or 3.
  'Case Selector' just add 1 to "x - y * floor(x/y) ' for case 1, 2, 3, or 4.
  Pictures 1, 5, 9 etc. are added to table 1 (case 1).
  Photos 2, 6, 10 etc. are added to table 2 (case 2).
  3, 7, 11 etc. are added to table 3 (case 3).
  Shots of 4, 8, 12 etc. are added to table 4 (4 cases).
  Average output displays the average value or total divided by the number of photos stored in this table ("Set (IQ + 1)'").

  My problems are:

  (1) I would like to output only the last 4 sets of data from different average output files, 1, 2, 3, and 4 to 4 (i.e. under .csv what is displayed on the screen in indicators "average output was 1, 2, 3 and 4 at the end of all iterations.)
  Where should I put my file save the diagram disabled so that it does?

  Put outside the main loop with automatic indexing on gives me a file with all previous data. (This is not feasible under my number of shots should number in thousands)

  Put outside the main loop with automatic indexing for off gives me only the last data series. (I need the output for 4 tables, not only the last run)

  Inside of the main loop to put (as shown) gives me the same number of files as the number of iterations. (Once again not possible due to the large number of files that will be generated and slow down the camera capture)

  In order to capture fast camera, I wish that these 4 files output only once the entire image capture are over.

  2) would preferably name the file once and for the program to add "(1)', ' (2)', ' (3)' and '(4)' file name tables"output on average"but appropriate file path controls are an another big headache for me.»»»

  3) PS is the initialization of an array enough not to use the memory manager? Or should I initialize 4 Bay?

  I am using Labview 2010.

  Thank you very much
  Charlene

  Hi Laura,

  I assume that you want to store the 4 x 4 table of average production for the last 4 iterations (correct me if I'm wrong). If so, I've set up the example as shown below:
  

  So, basically, what I did is I created a comparison group to check if the iteration is the iteration total last 4, you have defined. I have included a number to each of the business structures to set in which case it belongs to. The comparator will pass a Boolean result to the structure of the housing that contains the algorithm for writing a file. Since you mentioned that you want to create a file for each of the case, I created as a way to build to create the customized for each case file name. You will notice that there is a concanate string.vi that allows me to customize the name of the file. Since the common file must be exit average, I take the digital constant from the structure of the deal and convert it to a string and concanate to make it in e.g. output average 1. Please note that you need to put a basic path such as in my case, I want to save in the folder named ' New folder (3) "to my office.

  The writing on the case folder occurs only if the condition is true (that is, the last 4 iterations of the loop for)

  Once done, I created the header and write it in this text file and followed by data from spreadsheet on the next line.

  I enclose the code for your reference. I would like to know if this is what you wanted.

  Thank you

  Warm greetings,

  Lennard.C

• I need the driver for communication controller simple pci for Aspire 4820TG laptop

  I need the driver for communication controller simple pci for Aspire 4820TG laptop

  In fact, im doing the first batch of updates to windows and the yellow of the magically missing Pavilion, so im good now, thanks for the reply!

• I am trying to use the speakers on my midi keyboard as the default output for Windows 7 device

  I am trying to use the speakers on my midi keyboard as the default output for Windows 7 device. I have a midi keyboard Casio CTK-3000 and you want everything to sound out the two speakers on the keyboard.

  You can not.

  You can exchange midi data between the keyboard and a PC via the USB port. But not strong like the keyboard is not an audio device and therefore doesn't have the proper drivers.

  MIDI is not good in itself, it's just that a series of statements sent to a electonic module that transforms these 0 and 1 for sound samples. This isn't the same principle as an audio card/device.

  See you soon,.

  Jerry

• To learn how to install the product Hub for communications without OEBS

  Dear,

  Is someone can you please tell me how I can install the product hub for communications independently without Oracle E-Business Suite?

  Please suggest.

  Kind regards

  Clementine

  Hello

  I believe that you need to integrate with EBS, in any case you can also confirm this by a SR.

  Please see:

  Oracle product Hub - resources | Oracle

  http://www.Oracle.com/us/products/applications/master-data-management/MDM-overview-1954202.PDF

  INFORMATION INDEPTH NEWSLETTER data integration and Master Data Management Edition network

  http://docs.Oracle.com/CD/E20059_01/doc.250/e17549.PDF

  Thank you &

  Best regards

• Script queue CM with output for allocated, running and waiting for process

  Hi all
  
  Could someone please share the script which gives the result as below:
  
  Script Manager simultaneous tail with output for allocated, running and waiting for processes within a single script.
  
  Thanks for your time!
  
  Kind regards

  You can find a lot of scripts in the old nets.

  Simultaneous treatment - what are the meanings of the Codes in the STATUS_CODE and the PHASE_CODE FND_CONCURRENT_REQUESTS Table columns? [152209.1 ID]
  ANALYZEPENDING. SQL - analyze all applications pending [134033.1 ID]

  https://forums.Oracle.com/forums/search.jspa?threadID=&q=FND_CONCURRENT_REQUESTS+and+query&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
  https://forums.Oracle.com/forums/search.jspa?threadID=&q=FND_CONCURRENT_REQUESTS+and+time&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
  https://forums.Oracle.com/forums/search.jspa?threadID=&q=FND_CONCURRENT_REQUESTS+and+STATUS_CODE&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
  https://forums.Oracle.com/forums/search.jspa?threadID=&q=FND_CONCURRENT_REQUESTS+and+PHASE_CODE&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

  Thank you
  Hussein

• Application for Community aid guard "extract files" for several hours

  I have the latest version of the App for community support (3.2.0.610) on Mac OS X 10.6.3, but the problem with the update help content is not yet resolved. Well that download data very well, it will get stuck 'extraction' it indefinitely - and no, it's not because "the files are large.

  I checked with fseventer if the app actually something written on the hard disk during the 'extraction' - and there is nothing to indicate an activity to help from Adobe. Which leads me to believe that there actually * is * something broken.

  Also: while using Adobe is usually slow to the point of completely undo his goal, it most of the time does not display help pages at all. When you navigate to a previously visited page, the window remains empty.

  

  Just reload the page will display anything at all, but may still be missing images. It's extremely frustrating - and, frankly, not really worthy of the non-beta software...

  I am pleased to learn that the problem has been resolved. Just to sum up, if you have a proxy or a Pseudo-proxy software installed on your Mac, such as http://glimmerblocker.org, Adobe Community Help will not be able to download content from the Internet, and therefore would not allow. In case you have such a proxy installed and are faced with a similar problem, disable the proxy for some time, download content and turn it back on. We would look towards the resolution of this problem in one of our next release.

  Thanks xeophin for reporting this issue.

  -Adobe Community Help engineering

• Is it possible to put the speakers as the default output for the sounds of Windows and the headset as default device for music?

  Hello

  Is it possible to have all the sounds through the speakers, including music from WMP and WMP music in my headphones? Headset is USB (but I also have a Jack) and my speakers are with 3 Sockets at the back of my pc.
  Thank you.
  Friend,
  Zoenvisje
   
  Original title: all sounds through loudspeakers and music through headphones

  Hi zoenvisje,

  Thanks for posting your query in the Microsoft Community.

  Want to know if it is possible to play any sound on the computer with the headset. It can be difficult when something that is important to you does not work as expected.

  Method-

  It is not possible to make these changes on the computer.

  You can set a default speakers and use a different music player that supports select the default output as the headset device.

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.