Point of desire: A list of HP printers with PCL level, they argue

Similar Questions

• I'm looking for a simple list of available applications with different levels of creative cloud subscriptions?

  Boy, the Adobe web site is incredibly frustrating. It is very difficult to accomplish some very simple tasks. First of all, there should be an email address for contact. I shouldn't be forced to submit my question on a forum. It's cheap and lazy on the part of Adobe, especially when they charge a lot for their subscription applications.

  My biggest complaint is that I can't find a simple list of the applications available with the cloud creative in different subscription levels. When I search, it sends me to a video of slick 'overview' of the creative cloud which tells me zero in on specific applications available. It should be a simple list of available with creative cloud applications and a side-by-side comparison of the applications available with the different levels of subscription creative cloud. Why can't I find something like this on the web site of Adobe? I found a page that lists 15 adobe applications, but not a page that describes to me what apps come with what levels of creative cloud subscriptions.

  There are only 3 shots of cloud. Inclusions are the same for both commercial or student.

  All applications

  Desktop: desktop applications Adobe Creative Cloud | Adobe Creative Cloud

  Mobile applications: Adobe mobile, iPhone, iPad, Android apps | Adobe Creative Cloud

  Same info differently formatted: Adobe CC 2015 Direct Download Links: Creative Cloud 2015 Release | ProDesignTools

  Plan of photography: Photoshop + Lightroom

  Single App plans (applications available for the unique implementation plans are in the drop-down menu on the page of the plans of cloud)

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

• HP LaserJet P1102w: Windows 8.1 - run two different USB connected P1102w printers with simple shortcut on the desktop?

  I am trying to set up a single laptop Windows 8.1 for someone who uses it according to the seasons in two locations (FL and MY). I installed a HP LaserJet P1102w printer in each location. I wish I had a printer that is connected USB (one at a time will be connected) able to access in an only menu icon Office or file print command.

  When you add the second printer, Windows8.1 recocognized, the driver is already installed, he apparently recognizes the different addresses MAC and/or numbers of series of different printers and present second printer on the page devices and printers in Control Panel or allow a second printer on the desktop icon.  The only way to tell apart printers is that one is listed as a Hewlett-Packard LaserJet P1102w and the other is listed as a HP LaserJet P1102w. It is rather confusing to the elderly person who will be using the laptop.

  Is it possible to have the mobile exploit any printer is connected both by means of a simple print command or icon? Maybe by connecting via a WSD Port Monitor?

  Thanks for any help or advice!

  Dave Waters

  Hey @dmwaters138,

  Welcome to the Forums of HP Support!

  I understand that you do not want to have two HP LaserJet Pro P1102w printer operation via USB Wired on 1 single machine with a single order of printing or the icon. I would like to help you with the configuration of this option today. Because there are two distinct Laserjet on Windows 8.1 computer printers, to do two icons impression for various devices. The best way to tell the difference between the two devices is to rename printers. Thus, when the client goes in file and print in the print dialog window, simply choose the printer name that corresponds with the device they want to print to. You can rename printers all you want. Install printers on the WSD Port wireless network would give the same result of having two copies of the printer is installed on the computer. One thing I see, is that the name of the HP Laserjet Printer is unusual. It seems that your printers may be using the built in Windows drivers, rather than the HP Full Feature driver package for the device. This may cause printing conflicts in the future. Can I please you follow the steps below to set up and install both LaserJet HP correctly.

  Step 1: Remove the drivers:

  It is crucial that your HP LaserJet are using the correct HP driver package. So I'll have you remove two copies of your HP Laserjet of the computer. Please make sure that the USB cables are connected.

  1. Open the screen, Start by selecting the Windows icon at the bottom left of the computer screen or by selecting the Windows key bottom left of the keyboard, to the right of the Ctrl key
  2. In the start screen, type devices and printers. Click on devices and printers
  3. In devices and Printers window please right click on the Hewlett-Packard Laserjet and select delete device or delete. Once this copy is a party, please right click on the HP Laserjet P1102w and select 'remove device' for this one as well. After have removed two copies of the Laserjet please close devices and printers.
  4. Then, on the Start screen type programs and features. Click on programs and features to launch the window
  5. Scroll the list of programs and find the HP Laserjet driver package. If you see the HP Laserjet printers select Uninstall. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, please close programs and features and continue to the next step.

  Step 2: Remove temporary files:

  1. Open the screen, Start by selecting the Windows icon at the bottom left of the computer screen or by selecting the Windows key bottom left of the keyboard, to the right of the Ctrl key
  2. In the start screen, type run. Click on Run to launch the run dialogue box
  3. In the run box, type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 3: Install devices:

  1. Please leave unplugged USB cables

  2. Please click here to download the package full feature software and driver for the HP Laserjet Printer

  3. when the download is complete, please follow the instructions on the screen to install the first Laserjet. Make sure you select the 'install the printer software ' tab connect the USB cable only when the installation window prompts to.

  

  4. Once installation is complete for the first printer, please open the Start screen and type devices and printers.

  5. once the devices and printers opens, you will see the first copy you installed HP Laserjet. Please right click on the HP Laserjet Printer , and then select printer properties

  

  6. under printer properties , you will see the name of the printer on the general tab at the top. Please rename the printer to something that the customer acknowledges that this first printer. Then click on apply and then OK to save the changes.

  

  7. close devices and printers

  8 open the Start screen again. This time, type run. Click on Run to launch the run dialogue box.

  9. in the run box type %temp% , and then click OK. The Temp folder is now open

  10. in the Temp folder to locate the 7z... file. Click this folder to open it. This is the HP Installer package for HP Laserjet printers. Scroll to the bottom of this file and double left click on the P1100_P1560_P1600.exe driver package. The installation program will now open.

  

  11. in the title of the installation window, select "Add another printer. Don't connect not the USB at the moment. Click Next.

  

  12 connect the USB cable for the second printer once the installation window invites you to. After the second installation, please open the Start screen.

  13. in the start screen, type devices and printers. Click on devices and printers to open the window.

  14. in the printers and devices window, you will now see a second copy of your HP Laserjet. Right-click on the new copy and left click on properties of the printer. When the Properties window opens please rename the second copy of your printer. Click on apply then OK to save the changes.

  

  15. close devices and printers

  When the customer print, in the print dialog window they will just now to choose the name of the printer that fits the HP Laserjet Printer they wish to print to.

  

  I know that sounds like a lot of steps, but I wanted to give you as much detail as possible to ensure that this process goes well for you.

  Please let me know if the steps I have provided to resolve your problem. Good luck!

• Removing the names from the list of my blocked with Outlook Express email sender program Version 6.

  I use Outlook Express Version 6.  I have a list of names in my blocked senders list I want to remove.  I remove them.  Then when I close my e-mail program, the names reappear in my blocked senders list.  Is there a bug in this e-mail program that does not allow me to remove a few names from my blocked senders list?  I don't want to mess around with the registry key.  Does anyone else have this problem?  Has anyone been able to remove some names from your list of blocked senders?

  If they come back, it's a damaged registry key, but it is not very difficult to fix.

  1. close OE, then in Regedit, navigate to this key:

  | - HKEY_CURRENT_USER
  | - Identities
  |-{GUID}
  | - Software
  | - Microsoft
  | - Outlook Express
  |--------------------5.0

  where GUID is the Global Unique identifier for your identity.

  2. under this key, you will find the following between subkeys
  others:

  | - Block senders
  |-----------------------Rules
  | - Signatures

  Select the senders to block key and delete it. Publishers will be empty, but you can rebuild now.

  You can also create a new identity and import all of your messages and address book. The new identity will empty a list of blocked senders, but IMO, the registry key is much easier.

  Bruce Hagen ~ MS - MVP [Mail]

• Turbo Tax CD setup.exe file not available in Explorer. CD is listed in the Explorer with an Apple on the drive.

  My Turbo Tax CD does not start automatically with the initial insertion in the CD player.  The CD is listed in the Explorer with an Apple on the drive.  The Explorer does not list the file setup.exe on the CD.  However, he lists a few other folders.  I use Vista to try to load the CD.  The CD does very well on my XP computer.  Is there a problem with Vista with the CD that are for MAC and Windows PC?

  Hi Undertaker Farmer,

   

  Welcome to Microsoft Answers Forums.

  • You get the error message?
  • What is the edition of Windows vista installed on the computer?

  TurboTax is a non-Microsoft program and we are not trained in this regard. However I will try my best to help you. Please, follow these tips and see if it works.

  As a work around you perhaps activate the AutoPlay for the CD and check if the auto play works.

  When you turn automatic playback, you can choose what should happen when you insert different types of digital media into your computer. For example, you can choose what digital media player is used to play CDs. When AutoPlay is disabled, you are prompted to choose what you want to do when you insert media files in your computer.

  1. Open AutoPlay by clicking the Start button, clicking Control Panel, on material and audioand then click AutoPlay.
  2. Do one of the following:
     • To turn AutoPlay on, select the Use AutoPlay for all media and devices check box.
     • To turn AutoPlay off, clear the Use AutoPlay for all media and devices check box.
  3. Click Save.

  You can also try to copy all the contents of the CD to the hard drive and try to install and check.

  You can also try to run the file Setup from the command prompt and check what is happening.

  Click Start and type cmd and press enter in the command prompt window type the following command : \setup.exe and press ENTER.

  See also the link below for the site of TurboTax on the requirements and check if your computer meets the condition.

  TurboTax 2008 system requirements

  http://TurboTax.Intuit.com/support/kb/installing/system-requirements/6389.html

  If fail steps above I would suggest that you contact TurboTax support for more options, see the link below.

  http://community.Intuit.com/QuickBooks

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• List of Blackberry phones with internal GPS

  Hello

  We are developing the GPS application and I would like to provide my clients with the complete list of phones Blackberry with built-in GPS receiver.

  I wasn't able to find the list updated on blackberry.com.

  Anyone know the link where I can get this information.

  Thank you

  Thank you and I was able to find the official list.

  For anyone else that might need:

  http://NA.BlackBerry.com/eng/devices/features/GPS.jsp

• Query to find the Pages and the list of permissions associated with a particular role in PS

  I want a query to find the Pages and the list of permissions associated with specific roles in PS.

  For example, if we see the role of manager accounts payable, it conatins Pages and the list of permissions.

  But, to get everything in EXCEL sheet by Manuel priocess's BIG job. So, can someone give me the query.

  Please try under queries

  The roles assigned to the list of Perm:

  SELECT B.ROLENAME

  OF PSCLASSDEFN A, PSROLECLASS B

  WHERE (A.CLASSID = B.CLASSID

  AND A.CLASSID =: 1).

  List of Perm pages can access:

  SELECT B.MENUNAME, B.BARNAME, B.BARITEMNAME, B.PNLITEMNAME, C.PAGEACCESSDESCR, B.DISPLAYONLY

  OF PSCLASSDEFN A, PSAUTHITEM B, PSPGEACCESSDESC C

  WHERE (A.CLASSID = B.CLASSID

  AND A.CLASSID =: 1

  AND B.BARITEMNAME > ' '

  AND B.AUTHORIZEDACTIONS = C.AUTHORIZEDACTIONS)

• I'm looking for a Script that can list all virtual machines with type of NIC E1000 via the output of the CSV file.

  Hi gurrus and LucD

  I'm looking for a Script that can list all virtual machines with type of NIC E1000 via the output of the CSV file.

  The script should search for information in a multiple Vcenter servers and multiple clusters and list all the VMs name, status (two powers on or off) with type card NETWORK Type E1000 only no other.

  Concerning

  Nauman

  Try like this

  $report = @)

  {foreach ($cluster Get-cluster)

  foreach ($rp in Get-ResourcePool-location $cluster) {}

  foreach ($vm in (Get-VM-location the $rp |)) Where {Get-NetworkAdapter - VM $_______ | where {$_.}} Type - eq "e1000"}})) {}

  $report += $vm. Select @{N = "VM"; E={$_. Name}},

  @{N = 'vCenter'; E={$_. Uid.Split('@') [1]. "Split(':') [0]}},"

  @{N = "Cluster"; E = {$cluster. Name}},

  @{N = "ResourcePool"; E = {$rp. Name}}

  }

  }

  }

  $report | Export Csv C:\temp\report.csv - NoTypeInformation - UseCulture

• A list of virtual machines with type of controller of

  Hi guys,.

  Sorry for the dummy question, but I have new noob in powershell I can not understand how to get the list of virtual machines with type of controller of

  I would like to hva something that looks like this:

  controller name

  Mega-vm IDE

  Super-vm paravirtual

  lsi Tester-vm

  Get - vm mega-vm | Get-ScsiController shows which scsi controller is in the vm, but indicated a virtual machine name and do not watch IDE at all (do get-scsi ))

  Try something like this

  Get - VM |

  Select Name,@{N='Controller'; E = {(Get-contrôleur SCSI-VM $_ |)} {(Sélectionnez Type-ExpandProperty) - join ' |'}}

• List of virtual machines with static IP

  VMware gurus,

  I'm trying to generate a list of virtual machines that are configured with static IP address.

  IPPolicy: static

  I need a script that returns the name of the virtual machine that has static to IPpolicy.

  Jadapa RHCE, MCSA

  http://linuxgurus.WordPress.com

  You can create a list of virtual machines with static IP addresses with the following script PowerCLI:

  Get-VM | `
    Get-VMGuestNetworkInterface -GuestUser User -GuestPassword Password -HostUser User -HostPassword Password | `
    Select-Object -property VM,IPPolicy | `
    Where-Object {$_.IPPolicy -eq "Static"}
  

  Best regards, Robert

• How to make a list of dynamic selection with time interval of 15 minutes

  Hi all
  
  I have a question. I need a selection list containing the time with 15 minute intervals from 08:00 until 16:00.
  example 08:00
  08:15
  08:30
  08:45
  09:00
  09:15
  and so on until 16:00
  Or values stored in a column of varchar type.
  Can someone help me with this one please?
  
  Best regards
  Caroline

  You can generate the entries in a dynamic way, as:

  select  to_char(trunc(sysdate)+8/24+(level-1)*1/96,'HH24:MI') period
  from    dual
  connect by level <= 33 
  

  or if you want/need to use your stored values:

  select display_column, return_value from table where
   display_column in (
                 select  to_char(trunc(sysdate)+8/24+(level-1)*1/96,'HH24:MI') period
                 from    dual
                 connect by level <= 33 )
  

• How to build a list or a table with fixed values?

  Is it possible to create a list or a table with fixed values, but with a variable length?

  for example:

  var columns = "name, age, function;

  var insertParams = generateList ( listLen (columns), ',','.) » ); *

  fact: insertParams = ',?,??

  
  

  * (this function does not exist. This is just to illustrate what I need)

  I know that this feature is easily created by creating a loop, but I was wondering if it was possible with a single line of code.

  Thank you

  If he can generate a table in the same way, which would be as well.

  Our messages have clashed. But I think that repeatString() would do the trick. You could cut the rear comma with left() or convert it to a table. By default, ListToArray() will silently ignore the trailing comma.

• How can I set up a list of the Figures with the extra text?

  I am writing my thesis Art History, which includes a large group of figures at the end.  My Counsellor asked that I caption images, but also provide a list of Figures before starting the actual pictures.  I got this far - I use the Table of contents feature for automatically numbered captions and then back up the text of the legend to the list of Figures.

  Here's the rub: I need to include information on where I got the pictures I use attribution, but only in the list of figures.  My Adviser has specifically requested that I don't include this information in the captions as he felt that it cluttering up the images.  How can I include small amounts of text (for example "after Jones 1987, Fig. 22") for hundreds of images in the list of Figures without putting this info in the legends themselves?

  Of course, just by typing the information in the list Figures does not - as soon as the list is updated the extra text is deleted.  I've been playing with the hidden layers, but when I create a new layer mask with blocks of text, the numbering of the original layer is disrupted.  Any ideas on how to keep numbers and include additional information in the list of Figures without adding it to the visible caption? I would be very grateful for any help.

  Maybe at the end of your legend, in a [None] color text, 0.1 pt size? Do not put in a separate paragraph, because you have to pick this up as well for your table of contents. To change this little invisible text, you can use the story editor.

  (And I'm far enough, which suggests making it conditional text, that you would normally hide, have it show only when you generated the list of Figures, before some awake dormant brain cells and required attention.)

  "Course it would work - you would get the extra text in your list, and if you hide conditional text once again, your document is reversed 'normal' State." However, what makes the conditional text visible can cause your text reformattingand so your regular content would be nice but the list of Figures - generated with more text in your document! -could be shifted a few pages...)

• Display collection ArrayCollection in a list and the ArrayCollection with Drag and Drop collection reorgnize

  I have an ArrayCollection collection created like this

  qaAC = new ArrayCollection();

  for (var i: int = 0; i < 10; ++ i) {}
  var o: Object = {question: ' what is "+ i +"? ", answer:" it's "+ i"};
  qaAC.addItem (o);
  }

  The ArrayCollection collection is an array of object that has properties "question" and "answer to" custimized.

  I want to put 'issues' in the ArrayCollection collection in a list. 'qaAC.question' does not return an array of questions for me.

  I have to extract the ArrayCollection collection to form a new String table, and use the new array as the dataProvider of the list of questions.

  Is there a way better and clean?

  My goal is to use a list to reorgnize an ArrayCollection collection that contains complex objects (not simple string) with Drag & Drop. Is this possible?

  Any suggestions?

  I put two lists in my example to show how the ArrayCollection collection could be displayed in two different ways. You don't have to have two lists if you do not need them.

  When you change the order of the list made with drag and drop, you change the order of the collection ArrayCollection qaAC, so all the controls that display the qaAC will also be updated to reflect the new order. You can test this in the example I posted earlier. Change the order in the list of question and you will see the order change also in the list of responses. This is because they are both bound to the same collection of ArrayCollection. If you want to behave independently, you need two separate ArrayCollections.

  Chris

• List component: problem filling with actionscript

  As described in: ext = Flash_MX_2004 http://livedocs.adobe.com/flash/mx2004/main_7_2/wwhelp/wwhimpl/common/html/wwhelp.htm?cont & file = 00002489.html per no screen name
  
  Using code to add or remove items to list works very well with files with little code. Add any other code (not related), it is not populate the list correctly.
  
  Makes me maaaaaaad.
  
  I tried various export on the first frame / load classes in the framework: options.
  
  
  
  

  Thanks, GWD.

  I did a bit of code remove, but you convinced me to do a lot more in detail and I get at least a populated list now. The 'offending' code seems to be defining the functions of prototype for arrays (if attached) that appear to be independent. (Don't think that there is something wrong with this code in itself). Perhaps these change the array class which interfere with the loading of the class list or something. Oddly enough, I still have a defined string prototype function that does not seem to cause problems.

  Nasty little problem, because it arises only in the update when I thought I could got the lists already works.

  Thank you