Point of view make "permanent"?

Similar Questions

• Wallpaper from the point of view does not work on the iPhone 6

  Hello, I tried to set a wallpaper wallpapers apple and camera and my point of view option is disabled. And tried the hard reset and software update.

  

  Make sure that the settings > General > accessibility > reduce Motion is set to Off.

• Look an OSX 'point of view to portrait"not"view of landscape ".

  My Air 11 '' has a screen that is up 5 5/8 "and 10" wide.

  This is not a screen ideal for reading a document, if you are looking to him normally, but if I had to rotate and read the book with the WIDTH being 5 5/8 "and 10" HEIGHT, would be perfect. of course, I have to hold the computer in this way while I was reading, but I would try this.

  is there such a feature that would allow me to test this out. interested in native or third-party options.

  Thank you

  Look an OSX 'point of view to portrait"not"view of landscape ".

  If you use only the MacBook Air screen it's doable, but it's hard to return to the normal display.

  Try this (works) in El Capitan:

  1. Launch of system in the Apple  menu preferences.
  2. Command-Option-click on the "View" icon
  3. On the right side of the display preferences, search for the "Rotation" menu dropdown visible again.

  

• A point from view of security that I don't want to let Adobe flash in my safety net, but whenever I hit the box saying not to allow him to box keeps arise, really frustrating.

  From a security point of view, I don't want to not allow Adobe Flash in my democratic security but whenever I hit the sayinf box not to allow that box keeps popping up even though I tell him permit.  Very frustrating.

  In Internet Explorer, go to Tools / Internet Options / Security / Restricted Sites and add the Adobe site sends you this popup (or add all adobe).  To block messages, even as pop-up windows.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Display the text and the image on the camera's point of view using blackberry OS 5

  Hello

  I'm creating an application, which contains the label and the image on the camera's point of view. When I start the camera, that time itself the label should display on the top and the image should appear on background. I tried. but I got only for OS 7.

  http://docs.BlackBerry.com/en/developers/deliverables/36449/Display_text_on_live_camera_feed_LabelFi...

  But I need the OS 5. Is this possible in OS 5? Please give me an idea.

  Thanks in advance.

  That is right. Drawing on the display window is only available from 7 OS.

• Model point of view

  Hi all

  I was hoping someone could point me in the right direction.

  I'm trying to reflect an image that a marketing company, provides us with (we want to try to do in the House to cut costs).

  However I'm having trouble trying to match the very prospect of the bike shed. I have created the model in Autodesk Inventor (essentially a square glass panels with steel cage) but when I imported this model into Photoshop and place on the right Image I can't seem to get the same substantive point of view. You can see both the floor and the ceiling of the shelter as well as the left side seems to be bigger than the right side.

  How is this achieved? I tried to play with the camera 3D for hours but had no luck.

  

  Are the steps I took to try to get a 3D model to adapt

  1 ensure the multipiece aligns with the multi-room image so that the vanishing point is - by using the controls of the orbit

  2. set the camera FOV must match that of the image - if you know the equivalent of 35 mm from the lens used to take the picture, you can type this in the current view - properties as a starting point

  3 adjust the angle of the camera, using the controls pan and dolly

  I suspect you did 1 and 3 to the death.  Did you watch 2.

  Dave

• Contact points of view 12 Images

  Hallo,

  On my canon so that it is set up the contact points of view enabled and they appear on the image in the camera.

  They will appear on the image in EPS.

  Is it possible to consult these

  Thank you very much

  Roger

  Roger,

  No, unfortunately, as much as I know this feature is only available in the Canon software.

• How to call a display object with the criteria of the different point of view in each line an ADF BC table (Urgent)

  Hello world

  I use 11.1.1.7 version of Jdeveloper. I have a table adf BC. I need to call another ADF BC table inside the table. I need get the questionId from each row in the main table and fix the questionId as a point of view of the criteria drop inside the main table. I use to execute with parameter but always get the id of the last row question and criteria of this id as a point of view to each row of the table. How can I do this? 

  < af:table value = "#{bindings." AttachmentYesNoVO11.collectionModel}.

  var = "row" rows = "#{bindings." AttachmentYesNoVO11.rangeSize}.

  emptyText = "#{bindings." AttachmentYesNoVO11.viewable? "{'No data to display.': 'Access Denied.'}".

  fetchSize = "#{bindings." AttachmentYesNoVO11.rangeSize}.

  rowBandingInterval = "0" id = "t2".

  "partialTriggers =": cb4: cb3 ".

  styleClass = "AFStretchWidth" inlineStyle = "height: auto;"

  width = "1250" >

  < af:column sortProperty = "#{bindings." AttachmentYesNoVO11.hints.Question.name}.

  sortable = "false".

  headerText = "#{bindings." AttachmentYesNoVO11.hints.Question.label}.

  ID = "c10" width = "300" >

  < af:inputText value = "#{row.bindings.Question.inputValue} '"

  label = "#{bindings." AttachmentYesNoVO11.hints.Question.label}.

  required = "#{bindings." AttachmentYesNoVO11.hints.Question.mandatory}.

  columns = "#{bindings." AttachmentYesNoVO11.hints.Question.displayWidth}.

  maximumLength = "#{bindings." AttachmentYesNoVO11.hints.Question.precision}.

  shortDesc = "#{bindings." AttachmentYesNoVO11.hints.Question.tooltip}.

  ID = "it1" lines = '8' readOnly = "true" contentStyle = "width: 330px; "margin: 10px" >

  < f: validator binding="#{row.bindings.Question.validator}"/ >

  < / af:inputText >

  < / af:column >

  < af:column headerText = "#{bindings." AttachmentYesNoVO11.hints.ApplicationId.label}.

  ID = "c1" width = "300" >

  < af:table value = "#{bindings." AttachmentVO1.collectionModel}.

  var = "row" rows = "#{bindings." AttachmentVO1.rangeSize}.

  emptyText = "#{bindings." AttachmentVO1.viewable? "{'No data to display.': 'Access Denied.'}".

  fetchSize = "#{bindings." AttachmentVO1.rangeSize}.

  selectionListener = "#{bindings." AttachmentVO1.collectionModel.makeCurrent}.

  rowSelection = 'single '.

  Binding = "#{uploadDownloadBean.downloadTable} '"

  rowBandingInterval = "0" id = "t1".

  partialTriggers =': cb5: cb6: cb7: cb10 ">"

  < af:column id = 'c12' width = '0 '.

  headerText = "Download File" >

  < af:commandButton text = "#{row.bindings.FileName.inputValue}" id = "cb23" > "

  < af:fileDownloadActionListener

  filename = "#{row." Bindings.FileName.inputValue}.

  Method = "#{uploadDownloadBean.downloadFile} '"

  contentType='"#{row.bindings.MimeType.inputValue}"'/ >

  < / af:commandButton >

  < / af:column >

  < / af:table >

  < / af:table >

  User, because the two tables have a relationship, we call matter detail relationship, you can use a link view defining the relationship, and the framework will be the selection detail for you automatically.

  The next thing is that you can not put a table in a column of a table. This is not supported by the table component. You can use a picture of the tree for this, or tables cascading as I show in JDeveloper 11.1.2.1: cascade Tables | JDev & ADF Goodies

  Timo

• The specified display list is invalid or points of view have been selected using a different pattern

  Hello Experts,

  I get an error when I perform the aggregation using the aggregation view which was working fine before. We have ASO cube.

  'The list of the specified view is invalid or points of view have been selected using a different scheme'

  No major changes has been (as change the ownership/megaupload type etc).

  No addition of level in one of the dimension.

  Only members are added at the same level

  Please let me know what would cause to become invalid.

  Thank you

  Raja Mohamed

  RajaMohamed wrote:

  The change is only the addition of members at the same level.

  Only way I can see what is possible is if the dimension change your attributes, and where you had already all members, associated with an attribute, you have now a few not associate members.

  Take a good copy of the outline (or restore from backup) and run the MaxL following on the old and the new cubes:

  query database app.db list aso_level_info;
  

  That should show you where the differences are.

• agricultural point of view tool and pixel dimensions

  I used to use the perspective crop tool to solve the problems of point of view "key hole" and get the files that were larger than the original. Now, I'm getting tiny files after using this tool.

  What's changed, and I change it back?

  Thank you

  Phil

  I found the problem and the solution! It is in the preset tool bar. Somehow, I changed the settings. I changed them back to non-contraintes and all is well.

• Levels of the different point of view to a PDF form

  Levels of the different point of view to a PDF form: I have a PDF form that requires the intervention of different people. However, I need to hide certain sections of the form to be used only to specific people. How?

  You define the fields to be hidden by default. You can add code to show and unlock these fields by the user to enter a password, but it is a very weak control.

  Another approach is to use the ID of system connection. The only place that acrobat/Reader sees this information is in the identity object and to access this object in a form requires a special encoding because when you open a form it is not initializing the application, an event console. or a batch. You will need to add a special user folder script to each special user or all users to be able to access these data in a form. This may require the assistance of your IT support form.

  The folder level script could be:

  var MyLoginID = identity.loginID;

  You can access the MyLoginID in open a PDF file to get the ID of the connection. You can change the variable name for security reasons.

• How to use the same point of view as read only in the ADF and editable

  Hello

  How to use the same point of view as read only in the ADF and editable? How can we succeed in TF?

  -James

  Hello

  Steven Davelaar wrote a presentation on this 'building highly reusable Taskflows.

  From slide 14, that's where your use case comes into play

  Frank

• Different points of view static based on Variable OBIEE presentation

  Hello
  
  We have 4 reports with content static from different point of view. All these reports are on the same page of dashboard. How can I show only 1 report based on the value of a variable presentation set via a command prompt?
  For example:
  
  PromptValue1 should display only Report1
  PromptValue2 should display only Report2
  PromptValue3 should display only report3
  PromptValue4 should display only rapport4
  
  PS: Since I only static content, I can't use a filter.
  
  Thank you
  SJ

  Hello

  1. create cond_report1, cond_report2, cond_report3 and cond_report4 which should return records only when PromptValue1, PromptValue2, PromptValue3 and PromptValue4 are respectively applied

  2. Add the 4 sections and reports in each section

  3. Add the correspondent for the report you created in the first step provided that section for each section of the Properties section and select condition as superior to 0

  That's all!

  Thank you
  Jprakash

• How to launch 2 point of view DxO in Adobe Photoshop elements 12

  Does anyone know how to launch 2 point of view DxO in Adobe Photoshop elements 12 when it does NOT appear in the list of filters?  On my old computer, I'd see it listed on the bottom (under Digimarc) but with my new computer, after that I reinstalled all programs, it is not listed there.  DxO said their Version 2.1.8 / build 39 / 64-bit is now completely compatible to correct distortions when used as a Plugin to 12 elements Adobe.  I'd appreciate any help.

  Have you contacted Dx0 to check that the plugin is installed correctly? Other than that, I suggest you to reset the preferences for items, so it can check again for the plug-in.

• Point of view in Photoshop has terrible quality.

  Im trying to avoid using GIMP to Photoshop but one thing I noticed right away that the bat is the view port seems TERRIBLE. When I import the same image in both programs, GIMP does a much better job displaying the image while Photoshop empty. There must be a setting for this somewhere, but I don't know what to do to solve this problem.

  Here's what I'm talking about.

  Dropbox - Gimp_Photoshop_Compare.png

  Any help would be good.

  Just go in Edition > Preferences > transparency & Gamut and colors change from your grid in the middle and you should have the same point of view...