Pointer has changed!

Similar Questions

• Default anchor point has changed to the lower left corner of the layer?

  Whenever I have add a new text layer, the anchor point is automatically set on the lower left corner of the layer, and I find it very annoying to have to focus each time, and that it possibly is not perfectly in the center of the text, moreover, whenever I create a form with SHIFT-command that it revolves around its own anchor while he used to focus around the anchor in the Middle of the composition. I don't know what I did but it happened all of a sudden, and I don't know how to change it back .

  Thank you

  Focus you the text layer by resetting the position of the text layer in the primary processing Panel. Text animations give you a secondary position and anchor point controls. The text layer must have a position of half the width of the model and half the height of the model.

  Once you are there you center text horizontally around the anchor using the paragraph Panel. Make sure that you have first line or paragraph compensation applied.

  The last step is to visually Center the text vertically by adjusting the vertical offset in the character Panel. The value of the offset depends on the size of the font, the characters you use, font style and what your said eye is centered. Most of the time, you want a little more space at the bottom of the frame as above because we are used to see things sitting on a foundation. It's the same principle while watching a photo for framing.

  These are the same exact steps for the type definition in any application which allows you to adjust the formatting of the type. Even in MS Word, Illustrator, Photoshop, even the same using CSS rules when creating a web page.

• New update has changed the behavior of the anchor points on the ellipses - frustrating!

  The new update has changed how anchors work on ellipses (at least - maybe other forms, too). It was I had the area around the ellipse and with the selection tool, I could drag the 4 anchors around the ellipse for the shape I wanted. Now anchors on both sides are working this way, but the other two across the entire ellipse! Is there a way to recover the old anchors?

  I also get a lot of weird behavior when copying and the adjustment of the ellipses. Sometimes the bounding box is around the new ellipse in that I paste. I have to go back and forth between the select and direct selection tool, and finally he will come to the top. :-/

  Thank you!

  Matt

  Yes, I see that they make in an arc/ellipse tool where you got the opportunity to make a thing of pie-chart-in searching for Pacman.

  In addition, reset the rectangle enclosing do not work on this thing.

  The answer is, they are slowly but surely adding more robust features for 'shape' elements in Illustrator. The difference between a 'form' and just a path in the shape of form, it's that a 'form' is made with a tool of shape as the Ellipse tool or a Rectangle, polygon, etc.

  Or a form can be made to take a path that meets the criteria: for example, a rectangle of any rotation that has 4 points at all the right angles. You can experiment by drawing your own rectangular path and lining up all the points so that your angles and lines are perfectly straight and using the object > shape > convert to the form menu item. However, if you add even one point back to the sides of the rectangle, the form will automatically extend to return to the regular way - which will be exactly the same in terms of the look you see on the screen.

  The difference between paths and shapes is that forms give you additional properties, which you can change using the area at the bottom of the transformation Panel. For rectangles, it's just the corners and the width/height, but for ellipses, it's now this pie thing.

  Anyway, even if I can't find any options to create shapes already developed using the shape tools, you can scale your ellipse using the transform tool manual (E) which dimensionnera the horizontal ellipse, or you can use the object > shape > menu item to expand whenever you make an ellipse. This could be done more quickly by recording an action and assigning a shortcut key, so you can convert out of any shape in a simple path.

• The backup location has changed in iTunes 12.5?

  I've already mapped ~/Library/Application Support/MobileSync/Backup on a network share on my NAS from my MacBook has enough free space to store all the backups of my mobile device. This worked fine until I upgraded to iTunes 12.5.1 yesterday, now the backups seem to run OK until they arrive just before finishing, claiming there is not enough free space on the target device. It's weird, because there is about 5 TB of free on my NAS. At this point, there is a new folder inside backup with today's date, and the devices of iTunes preferences page displays a new entry for the unknown, dated 01/01/2001 00:00.

  So, what has changed with the latest version of iTunes? The audit of the application of the host operating system is free space instead of the backup location? Seems a bit silly...

  Have exactly the same problem.  Once I removed the symlink to my folder of nas backup completed without error.  I copied my share of nas backup and recreated the symlink and then itunes was able to read correctly.  Still not able to complete the backup in the folder of sin, however.

• When right-clicking on a link and a window opens, I want it ask me "Open Link in New Window" first of all, not the second. This has changed in the last update.

  So I got allows you to right-click on a link and go the first option and open this link in a new window.
  I don't not like tabs, or use them.
  The latest update or version of Firefox has changed this and now
  Open the link in a new tab first, then
  Open the link in a new window.
  My question is, how can I change this back to the way it was.
  Thank you very much
  TREV

  My problem is the opposite of the OP, but the result is the same. Years of the use of previous versions of Firefox have conditioned me to open links in a new tab by selecting the second choice of right click menu without looking. After a week of trying to readjust in places reversed 'Open link in a new window' and "Open link in a new tab", I'm always unintentionally opening new windows instead of tabs every time after time. The point is, why should I have to adjust (or need a plugin external to solve your problem). YOU TEACHES ME HOW to DO THIS WAY, then why you changed it? Do you think that the reversal is most effective? A task force of new users select the new range? Do you have a taste of trial with Pepsi? Have you adopted Microsoft 'we know what you want better than you' policy? People in the drive of England on the left side of the road with the steering wheel on the right. Maybe it's actually a better way to do it. Maybe we should just rethink all cars new American model in this way and reverse all the signs from one day to the next without any warning - no ads, no choice, do it just because the engineers decided that it is better. While we're here, maybe you should adopt menu 'Ribbon' of MS then. I do sound a little angry or like if I have too much time on my hands? If so, it is because I am and I do not have enough to relearn the same tasks whenever you think of a better way to perform a basic operation. I'm sick of being 'improved' perfectly feasible programs to offers no improvement, only the need for a conversion.

• "Windows update default location of data has changed". " Microsoft Fix - it message. No solution is apparent.

  "Windows update default location of data has changed". " Exactly, what causes this in Windows XP? I does not change the situation. So who, or what, has changed the default location? The Op XP system is still supported, so why is there no solution? And why it still occur? ... Difficult questions, Microsoft?

  PS. What is the default location anyway?

  "Windows update default location of data has changed". " Exactly, what causes this in Windows XP? I does not change the situation. So who, or what, has changed the default location? The Op XP system is still supported, so why is there no solution? And why it still occur? ... Difficult questions, Microsoft?

  PS. What is the default location anyway?

  It is a peer-to-peer forum.  You don't talk to Microsoft.

  A quick search indicates you have probably allowed the system to become infested/infected.

  Here's what I propose - from top to down, don't skip any even if you do 30 minutes as part of an obsession, part of all that you already have.  ;-)

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Cleaning the components of update on your Windows XP computer

  Given your current number, it's a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you will use the aggressive version if given a choice):
  How to reset the Windows Update components?

  Reset.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• My taskbar has changed

  Hi, Im having a similar problem but restore to an earlier point has failed.

  My taskbar has started to stack windows superimposed instead of next to each other as follows:

  

  as you can see my quick launch is also completely visible that it wasn't before.

  I tried to restore my laptop to an earlier date, but it would only go back to yesterday, which is useless because that its been like this a week.

  Hope that I have not posted this in the wrong place, it seemed to be the only topic that is similar to my problem.

  Thank you

  Right click on an empty spot in the taskbar and choose to unlock (turn off the checkbox for "lock the taskbar").

  Then you will see little "handles" (dotted line) on the toolbar resize sections.  You can resize the windows application area to give him more room. When you are satisfied all, block him again so he does not change on you.

• MY FONT SIZE HAS CHANGED WITH THE LAST UPDATE AND I CAN'T SEEM TO RETURN TO NORMAL.

  WITH THE LAST UPDATE OF THE FONT SIZE CHANGED ON MY EMAIL ACCOUNTS AND PAGES OF MY WORK.  IT OF SMALL, I CAN'T READ IT EVEN WITH GLASSES ON. IT IS MAGNIFIED 150 TIMES.  MY COMPANY, HE CHANGED THE RESOLUTION WHICH HAS CHANGED MY SIZES OF ICONS, BUT DOESN'T HAVE ANYTHING DONE TO MY FONT SIZES.  THE HAD ME ALSO DO SOMETHING WITH MICROSOFT THAT DOESN'T WORK ANYMORE.  SO THEY HAD ME CONTACT MICROSOFT WHO CAN HELP ME BECAUSE I CAN'T AFFORD TO PAY TO GET ANSWERS TO MY QUESTIONS.  I AM ALREADY 3 HOURS LATE FOR WORK IN TRYING TO SOLVE THIS PROBLEM.  CAN SOMEONE OUT THERE HELP ME?

  Hi ELLA SMITH (KELLY).

   

  Welcome to the Microsoft community forums. Please post your query and giving me the opportunity to help you.

  I'm sorry for the inconvenience caused.

  I will guide you on the issue of the police.

  (1) you are on a domain network?

  (2) the Windows updates were installed?

  (3) what happens when you try to change the font sizes, you get an error message?

  I suggest you refer to the link to verify that Windows update have been installed.

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Method 1:

  You can check follow them the links below, if that helps:

  (1) change the Windows fonts
  

  http://windowshelp.Microsoft.com/Windows/en-in/help/bdc9d003-777b-4B1E-9664-2957f50870bd1033.mspx

  (2) fonts: frequently asked questions
  
  http://windowshelp.Microsoft.com/Windows/en-in/help/0caf0419-6990-45de-8D71-67f14a3ae4c71033.mspx

  (3) how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  
  http://support.Microsoft.com/default.aspx/KB/936212

  Method2:

  un) make system restore, choose the date where the screen resolution and the fonts were ok as your restore point.

  (b) when these updates come to install again, do only ONE AT A TIME. After each installation, check if the screen is ok, and then next update and so on.

  c) in this way, you'll be able to simply update is the cause of this problem.

  If the problem persists feel free to post us. We're here to help.

  Thank you.

• Major problem after update of the app: DeployException: result::failure-104 (incompatibility digest... something has changed.)

  Hello

  After you fix a problem with my signature keys ( http://supportforums.blackberry.com/t5/Android-Runtime-Development/Signing-Keys-Mess/td-p/3022020) I managed to download my update of the app.

  Unfortunately there was something wrong, that users who attempt to update were a major problem: "update this game [...] and he could not install after he asked me to accept the location service [...] It closes right when you are asked to accept again for approval of location services. »

  Now, I was able to reproduce myself.

  Update of the application, the user is invited to accept the authorization of the Internet, and if they accept it or not, the strength of the app closes then. (I had added Android ACCESS_WIFI_STATE permission in the manifest, but the problem persists if I remove it)

  I tried to debug the problem and all that I can see is the LogCat shows this at the launch of the app 'day '.

  11-20 15:59:27.927: D/Install@Launch (7557275): incompatibility digest for com.irache.octagonp.gYABgELGe5sJN9mSCfgTnlCk3hw, something has changed.

  In addition, by updating an existing installation, I get this error message on BlackBerry deployment:

  result::failure-104
  com.qnx.bbt.deploy.Deploy$ DeployException: result::failure-104

  I compared the new and the old manifest, and all the relevant fields seem has not changed:-l' author of the Package, Package-author-Id, package name, package Description, Id of Package, Package-author-certificate-Hash.

  The application works correctly with a fresh install, and I can update without problem to other apps that have gone through similar changes very recently, in libraries, permissions...

  Could someone point me in the right direction?

  Thank you.

  The error-104 is the Android Runtime.  It indicates that the APK file that is trying the upgrade has been signed with a different key than the original.  It made no reference to any BlackBerry sign the file of the bar, but the certificate you use to sign the APK using ADT.  On an Android device, the same error occurs if you try to upgrade an APK that is signed with a different certificate.

  You can view the certificate that has been used on an APK file using a command like this:

  C:\Program Files (x86)\Java\jdk1.7.0_45\bin\jarsigner -verify -certs -verbose myApp.apk > output.txt
  

• What has changed in Windows 7 solitaire?

  Solitaire in Windows 7 is different. In the previous OS (Vista) my win percentage was 20%. In win7 is 13% (same computer). In addition, I maybe paranoid, but it seems that very often on the basis of a choice of 2 options (2 Kings at the top battery and 1 slot empty, for example) I move the first King to the empty slot and expose a black 4 where the King was. I don't like black 4S so I do it again and move the second King to the location empty and guess what? It exposes a black 4 where was the second King. Similar situations occur frequently. It's frustrating. What has changed?

  Was this the same 4 black, or was a Spike and the other Clubs?

  If you're going to programs and features / Turn Windows Features On or Off / games / uncheck Solitaire, followed by a restart, then reverse uncheck it and restart once more, you could find yourself with a solitary work?

  You can create another user, if you don't have one and see if they have the same problem.

  The only other thing I can say, is that you give the System File Checker go.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

• Keyboard layout has changed

  My keyboard has suddenly changed such as SHIFT + 2 gives rather than ", the hash key gives------, shift + 3 gives # instead of the pound sign etc.» However, when I check in languages all parameters are still English UK. All responses I've looked at suggest that it is a problem if the keyboard layout gets switched to the English of the United States but mine is permanently set to English UK. How can I fix this.

  Thank you.

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that the keyboard layout has changed and I'll be happy to answer your query. Let me ask you;

  1. Remember to no particular change in page layout settings or in the computer before the show?
  2. What all the troubleshooting methods have been tried?

  This problem may be due to some incorrect settings or due to some corrupt language files. Let's try the following methods and check the status.

  Method 1: Try to set a keyboard as a default configuration and check if it helps.

  To set a keyboard as the default keyboard, so you don't have to change the input methods to enter text with it, follow these steps:

  a. open Language in the Control Panel by dragging from the edge right of the screen, tap Search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking Search), Add a language you enter in the search box and then click Add a language.

  b. press or click on Advanced settings.

  c. under Override for the default input method, select the keyboard layout, you want to be your default keyboard and then press or click Save.

  Method 2: If the problem persists, remove and re-add the languages.

  You can see: change your language or your keyboard

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Current version of the data in the database has changed since the user initiated the update process.

  Hello

  I get this error message: when I update a table.

  • Current version of the data in the database has changed since the user initiated the update process. version of current line identifier = "4975F66067C6EE412FF51DF46B8C4916" line application version identifier = "31163419BE48C198DE88A34AD12FE4D2".

  I get this message when a process is used to run an update on the same table.

  BEGIN

  RUN IMMEDIATELY "UPDATE CONTRATS_MAINTENANCE SET EMAIL_SENDED = 0 WHERE ID =: 1' WITH THE HELP OF: P27_ID;"

  END;

  There is an automated line (DML) process process on the table on this page.

  
  

  I understand that I get this error message because I update the database EMAIL_SENDED in the same table column and tha the automated process line try to update the same table...

  On this page, I want to the column EMAIL_SENDED always has the value 0 (zero). It is a database column

  How to do?

  Thank you for your help.

  Christian

  If you try to make it through a normal form. So in this case email_sended is getting two values one of your FORM and one of your update statement.

  To resolve this problem, you can code in hard EMAIL_SENDED point the value '0' and keep only the database column.

  If the whenver update you will automatically take the value 0.

  Another solution would be to remove this column from your FORM and then update by creating a process after submit.

  BR,

  Patrick

• (Redirected) Alienware Aurora R3 / water damage / the amount of memory has changed... Problem

  Hi all

  Last night, I spilled water on top of my alienware desktop computer. I quickly shutdown, unplugged and held head down for awhile. First time I turned it back on, it gave me the "amount of memory has changed, but none has been added" problem. I went through system troubleshoot (F5 I think) and had everything to the point where it asks if you want to continue for 30 minutes. I skipped that and restarted. Second time I turned on my computer, it loaded all regularly, logged into my account, desktop screen with files, etc. Then he went straight to the screen of closing and began to beep, in the explosion of two. Whenever I try to start, stuck to the error page "the amount of memory" with two beeps.

  I tried a few searches and it seems it could be a motherboard problem, I'm not sure. I would like to email technical support, but it seems impossible without active coverage? (Mine is is no longer active).

  My question is, is it sounds like a problem of motherboard and if so, how can I replace it in my office? Where to get the part, etc.

  Thank you for your useful answers.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• First CC2015 - why the functionality Alt + Shft has changed when you try to replace a sequence on the chronology of the tray?

  I frequently and drag a sequence from the tray to replace an earlier version of it on the timeline. I use Alt-shift to keep that all mount points. This feature has changed. It replaces the old sequence with the first clip from inside the new nested sequence. Is this a bug? Is there a way to get around this?

  On an iMac, retina 5K, Yosemite, all software up to date.

  Hi Ted,

  ALT + SHIFT + do drag works very well in 2015 with clips - just re-tested. I'll try also with nested sequences, but if the problem is with nested seq, consult your option "insert and replace sequences as nests or individual sequences' on top left of your sequence died.

• HPCM error - definition model has changed since the last calculation

  Hello world
  
  I have a bit of a problem on an application Coordinator.
  
  (1) message warning when I go to balancing-> "model has changed since the last calculation."
  (2) message when I select cube considered in balancing-> 'the database has not been updated with the latest results of calculation."
  
  What has been done before I got to this point:
  
  (1) add a few lev 0 members in the current hierarchy for cost center
  (2) run a comparison to check if they are picked up (OK!)
  3) deploy EPMA (result: SUCCESSFUL message)
  4) go to HPCM and deploy the two cubes (OK-> at least is what the status of the job)
  (5) control of new members in OTL (OK! they are there)
  (6) the HPCM Calc launch, check the box to erase all data of calc prev, check the box to regenerate calcs, check the box to transfer data to the reporting cube.
  result: employment status: OK!
  
  But in reality: never got transferred through to the reporting cube.
  
  I repeated steps 1 through 6, a few times, I even changed something in the (alias) shared library to check if it went through.
  In EPMA it says that the app is 'in sync with the deployment. And when I run a comparison with deployed application, it does not pick up anything.
  
  Any ideas?
  
  Thank you
  
  Kind regards
  Annie

  Hello world

  Just realised I never came back with the answer to my question. I was developing the new application and starts the compilation of the Calc sequentially, so while I was developing Calc for step 2 or 3, rebuild only those scripts are calculate only the specific areas. This is the reason why I received this message. As soon as I transferred both apps and recalculated at the beginning, the error message disappeared.
  Just in case someone wondered.

  See you soon,.
  Annie