The backup location has changed in iTunes 12.5?

Similar Questions

• RMAN backup location must change and remove obsolete

  Dear Experts,

  I'm working on the following environment,

  Operating system: Windows server 2012 R2

  Oracle version: 11.2.0.1.0 release

  Type of RMAN backup: Cumulative (preferred by the direction and I can't change it in differential backup)

  My current situation,

  I set up RMAN and H: drive for purposes of backup and G: for Archivelog.

  Recently, my city was covered by the flood waters and the server works not for a week so that we delete obsolete level 0 does not work.

  Currently there is not enough space to run a level 1 and level 0, while I should change the backup location.

  My Question is,

  (1) I need to change this location of drive H: to G: drive backup backup correctly without error not enough space.

  (2) after having taken a level 1 and level 0, depending on my 1 redundancy, RMAN mechanism should delete obsolete backup disk without failure G: and H:.

  Kindly help me how to get to my need. This will help me, thanks in advance

  You can

  1. replace the DB_RECOVERY_FILE_DEST G:

  2 run backups

  3. wait for the DELETE OBSOLETE delete obsolete backups of H:

  and then

  4. change the DB_RECOVERY_FILE_DEST return h as it was more early

  In this way, you don't have to use the FORMAT or CHANNEL of CONFIGURE commands (I was referring to CONFIGURE CHANNEL, not ALLOCATE CHANNEL) to change the destination of the backup

  Hemant K Collette

• Lightroom 4 - Import Error Message "no files can be copied to the backup location.

  Hi people! I hope that someone can help you.  All of a sudden, I get an error message odd when I import into lightroom 4.  "File could not be copied to the backup location.  I can click OK and continue to work as usual. I see my pictures, everything seems ok. When I export, backup works fine without error message.  I get nervous on error messages in LR.  Any help would be greatly appreciated.  Thank you!

  You have the option checked to create a backup copy of the images imported in the import dialog window? If you verify that your username has write permissions to the folded selected as a backup location.

  Or just uncheck that option and test.

• Lightroom does not? I have "the files could not be copied to the backup location" notice appearing as I download from the camera. I ignore and click OK. I then edit my photos and try to export. Water is no longer an option and the exported wor

  5.7 Lightroom does not. I have 'some import options was made' - "files could not be copied to the backup location" notice appearing as I download the device. I ignore and click OK. I then edit my photos and try to export. Water is no longer an option and exported labor is the original and not the published work? What do I need to fix this?

  As Chetna asked, you export original?  Yes, you are. It is asking to export a copy of your original file, that is, of course, not changed. So, Yes, you won't see any of your changes. That's why you can not apply a watermark. Adding a watermark in the image he'd a file not original.

  Choose another value for the Format of Image under settings in the file.

  HAL

• After that Ms last update the task manager has changed

  After that the last MS updated, the task manager has changed. I used for the right click at the bottom of the screen, select Task Manager & get 3 or 4? options to select.

  Those I used gave me a chart of the use of Internet + speed info; now, I only get the list of processes, no option & the only way out is to TAP (DO NOT TOUCH!) the ESC key.

  Is this another feature of MS or make me a form of bribery? JV

  Sorry, but I don't really know what the problem is here. In any case, try to roll back OS to an earlier time using System Restore tool. Choose the time prior to installation of update from Ms. Everything should be as it was before.

• Error message: since Windows was first activated on this computer, the computer hardware has changed significantly.

  original title: reactivation

  I just got this message: since Windows was first activated on this computer, the computer hardware has changed significantly.  Because of these changes, Windows must be re-activated in 2 days.  You want to reactivate Windows?  No hardware changes have been for a few years.

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the letters and numbers (number 8 for the)
  Letter B, etc.).

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Users of Windows XP - Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• all the file (Application) has changed how to fix .exe type

  all the file (Application) has changed how to fix .exe type

  Hi Jonathan Charly.

  Remember to make changes before this problem?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  
  Method 2: run the fixit available in the link below and check if that makes a difference

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• The default value has changed on my PC Urgent

  The default value has changed on my PC, so all my files (.exe) and logos displayed the logo of the program selected by default. I installed the software that windows has suggested, but when I tried to get rid of him. He just keeps on popping up. It could be a virus or something that just makes me sick...

  I'd like to get my Windows working again as soon as possible.
  Thank you
  Of
  Hatter to Apple.

  It seems that http://go.microsoft.com/?linkid=9662689 Works Great Thank You So Much

  http://support.Microsoft.com/kb/950505#FixItForMeAlways

• Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any w

  Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any way around this? sounds to me ridiculous

  Contacted Adobe Support and they recommended to configure the new Adobe ID?

• The screen resolution has changed.

  After that I have updated to the latest version of Muse, my screen is enlarged. It looks like the screen resolution has changed. How can I change the resolution of the screen on Muse?

  On Windows, 2014.3 Muse now supports 100%, 150% or 200% resolution, according to the scale factor you set in Control Panel. My guess is that you have your control panel set at about 125 per cent and Muse chose the scale factor supported 'closer', which is 150%. We've heard a few users that they would prefer Muse to continue functioning at 100% in this case.

  This sounds like the situation you're in?

  Now, you need to set the scale factor to your screen to 100% having muse running at 100%, but we are working on a solution in the short term to say the Muse to operate at 100% without changing your scale factor of Panel controls.

• Problem of color with pdf from Indesign. I have a special mix CMYK for a bcard in Indesign. When I export the pdf file that the CMYK mix has changed just started today 1.13.15 Running Yosemite 10.10.1 all help to what to look for would be greatly apprecia

  I have a special mix CMYK for a bcard in Indesign. When I export the pdf file that the CMYK mix has changed just started today 1.13.15 Running Yosemite 10.10.1 all help to what to look for would be greatly appreciated.

  You are mixing color profiles a-place, or document workspace does not match the destination to export space is incompatible.

• ITunes media folder location has changed, but it keeps resetting to the default location

  Hello

  I changed my iTunes media folder location. My internal drive has two drives (was originally a Fusion player, after a system crash, I had to clean it and install Mac OS from scratch and is no longer read as a reader of fusion, but I agree with it), so one of the discs that I use for the OS itself and the other to store the data. I've changed most of my files application for the storage disk storage. When I change the location of folder of media to iTunes, after reboot, it restores the original file to ~/Music/iTunes/iTunes Media.

  Why does that happen?

  If this info can help, I do not have the bluetooth icon in the menu bar, so I removed it by opening bluetooth preferences and unchecked 'see the bluetooth in the menu bar. He disappears. When I restart, it seems once again, it is not happened to Yosemite.

  Thanks in advance.

  iTunes will revert to the default locations, if the configured drive is not present when iTunes opens. This happens if the drive is not mounted or asleep...

• Windows 7 backup and restore shows no internal hard disk and the backup location option

  Windows 7 backup and restore is only the possibility to go back to D drive which is a burner DVD C and F is both internal and external hard drives C is the system drive and F is a newly formatted 1 TB drive free. I access F in Explorer windows without any problems and I would use it for backup.

  Hi dairy Tech 2000,

  Welcome to the Microsoft answers site.

  Drive/C: would not be shown to the backup files since this is the system drive. You cannot save files to C:/drive to C:/drive.

  However, when you change the backup settings to another drive on the computer, follow the steps below:
  1. click on start.
  2. backup and restore type of search.
  3. click on change settings.
  4. This will show the drives internal i.e. your F: drive / on the computer.
  Now you can set the location of drive F:.

  Learn more about the backup from the links below: back up and restore: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Back-up-and-restore-frequently-asked-questions
  Backup your files: http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files
  Set or change automatic backup settings: http://Windows.Microsoft.com/en-us/Windows7/set-up-or-change-automatic-backup-settings

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Snapshot location has changed - still no work

  Hello

  Yesterday, I tried to create a snapshot for a machine that has the disc:

  -Disk 1 = > 190 GB on a local storage (block size of ~ 815 GB / 1 MB)

  -Disk 2 = > 2 TB on a storage iSCSI (block size of 2 to/8 MB)

  Due to the size of the "disk 2" I couldn't do a snapshot in the default location, which is the directory of the virtual machine on the "disk 1". Get the message "the file is larger than the maximum size supported by the data store".

  So, after searching a little I found the article to change the location of the snapshot. Search store snapshots on a third drive:

  -Disc 3 = > 4 to on iSCSI storage (4 TB (2 x 2 to/8 MB block size) ~3.6 to are free)

  Add these two lines at the end of the vmx file:

  workingDir = "" / vmfs/volumes/Disk_3/VM-Snapshots ' "

  Disk_1 /machineXY Sched.swap.dir="/vmfs/volumes/.

  The virtual machine removed from the inventory and readded, but I still get the same error message when you try to create a snapshot.

  When you change the settings of the machine, I see that the "VM workplace" is set to the new location. The configuration file is still on the repertoire of the virtual machine on 'Disc 1'.

  The Machine runs VMware ESXi 4.0.0 build 236512.

  Any ideas why it still doesn't work?

  Thank you

  URS

  Ahhh... OK, so if I understand correctly, the second disc should be (at least) 16 GB smaller to make snapshots to work?

  Fix.

  Even if the place to store catches instant itself is larger than 2 TB, because a single vmdk cannot 2 TB and more, right?

  Yes. The snapshot file contains additional data for management. In this way a "full" snapshot file can be a few GB of more big than the basic disk and the maximum size of a file is always 2 TB-512Bytes.

  Store the file on disk 3 makes no difference.

  It is simply designed as a test, if the above does not apply.

  André

• Problem with the backup location Photo

  I just started using LR 4 for the first time.  On my first import, that I chose newly imported backup photos automatically on a device of spare hard drive on my Mac that I hadn't previously used.  After I finished with LR, I closed out of the app.  So I decided (Yes, it seemed a good idea at the time) to rename the hard drive, I decided to use for backups of my photo for "Photo Backup Drive.  However, when I then open LR, the ability to record automatic backups is grayed out.

  The option still listed the former name of the hard drive, so I went back in and renamed that animate its original name.  Back in LR, the option was nevertheless still grayed out.  You can see the name of path (initially selected before I renamed the reader), but the check box is not available and you cannot change the option.  It seems that the program was not able to recognize the change of name of path and then just locked up.  Does anyone know a way to reset this option from one location other than the normal selection point?

  Note, this is the place for my photos of automatic backup, not the rear location for my catalog (which is always the default file location 'Photos' and works very well).

  OK, problem solved.  It was not at all a problem of LR.  I didn't realize that when first go you back in the window "import" the Central selection automatically default the option "add" (to import a photo without moving or copying this).  Therefore, if you choose "Copy" or "copy as DNG' rather than 'Add', the possibility to choose a location for an automatic backup becomes non-greyed and the tick becomes available.  You can then use the selector drop-down list of re - choose the location of your backup files (and it recognizes the current name of everything that you hard drives, even if you changed just one of them).  You can then delete any old path names.

  It was just a coincidence that she appeared to grey out after that I changed the name of the drive.

  Thanks to everyone who watched it and started trying to find an answer.