Points cirkel line animation

Similar Questions

• Satellite M307 - a lot of points and lines on the screen

  I bought this new pc in China there is a half year
  However, when I move the screen today, there are still a lot of points and lines in this respect.

  But if I don't touch it, it will be OK. I think this may be caused by the connection between the screen and the main physical system. Please contact me: [email protected]

  Thank you!

  Hello!

  I agree with you it's a connection problem or the display is faulty.

  I think your laptop should be still under warranty then I would go to a local ASP.
  They can order all the necessary parts and Exchange.

  Good bye

• Anchor points of line Segment

  I want to draw with the line segment tool.  When I want to add a line segment to another segment of line an anchor usually shows upward I know the lines are intertwined with precision.  For some reason any anchor point is not underlined, and the lines are intertwined with precision.  Do I have to activate this feature somewhere?

  funwithphi,

  This looks like a tick toggle view > comments (Ctrl / Cmd + U). You had a mishit keyboard.

• Change the default continuous points to line separator

  Hello
  
  I would like to change the separator in the Configurator in a continuous line of points. For example, the line below the page header is a continuous line - I would like to than the separator to look like this. I checked the properties of the splitter, but it doesn't have what we can change. Is there a possibility to create a new UI element that can do the job? I downloaded the screenshot here - http://www.overpic.net/viewer.php?file=x9imps6bfwvpbfjevfchk.jpg
  
  Thanks in advance,
  Biju.

  Biju-

  It would be unwise to invest as much in the development of UI 11i10 that depends on the element separator, as the separator element is not rendered by OA Framework in version 12.

  As an alternative, you may want to consider whether Horizontal Rule in HTML element)

• How to create a wavy with coherent wave regardless of anchor point spacing line?

  

  The picture above shows my problem. All have the same zig zag setting the effect, but because of the inconsistent anchor point spacing is inconsistent ripple. Is there a way to make a wavy line that is not a distortion of the anchor point distances? I wish that all my wavy lines to look nice and consistent like this:

  

  The only reason that they are so consistent is the absolute value was used but these lines are all straight and have only 2 anchor points, beginning and end, so the wave is coherent. It is more difficult when the lines are curved and have a different number and spacing of anchor points.

  You can also use the graphic style inside this sample file (AI-CS-5 format, approx. 1 MB):

  https://docs.Google.com/file/d/0b-IWkNSl4y_3RVVaT0Fkb3RaTzQ/edit

• Point to point CO line IP bridge with two SPA3102 devices

  It is a strange situation, hopefully you guys can help me with that.  I have a location of remote desktop with a rear door intercom station that I need to get connected to my Panasonic PBX.  I was hoping to use a style Viking W-1000 intercom station, that would normally bind to an unused port of CO on the telephone system.  It works like a standard co line, the intercom station generates a ring in the PBX, such as an incoming call on a normal analog line.  I was expecting a pair of devices Linksys/Cisco SPA3102 allows 'bridge' this call together on our existing IP connections.  I mean there a push of button on the intercom station would be in the line on one of the units SPA3102 port.  This unit would send the call via IP and would then ring the port phone on the other SPA3102 to which is connected the port of CO on my phone system.

  Intercom >-(CO line)-[SPA3102} = {IP network} = [SPA3102]-(CO Line)---> > PBX CO Port]

  Anyone know if this is possible?  Are there other features that make this easier?

  This should be done without having to dial additional numbers or PIN on the first SPA3102.

  Don't know where to start to set up ports and connect the two units SPA3102 correctly.

  Thanks for any help in advance.

  With what I understand your trying to do, the same configurations that I should be OK for your scenario work. I have all the configurations available, if anyone needs them.

• Does anyone know how to make text appear lines animated in a title?

  example of http://www.conciergeauctions.com/auctions/Kilkee-House-Paradise-Island-Nassau-Bahamas/ 0:19 second mark

  It's linear Wipe of transitions for the lines and they were fixed in the text with a transition.over to dissolve an acreage...

• Problem with animation line flicker/aliasing

  Hi I was wondering if anyone had any suggestions on trying to get this smoother animation and a little crisper.

  I know that the quality will be slightly less good in a gif format.

  https://S3.amazonaws.com/uploads.hipchat.com/115279/3089179/b6GFClDGSBHAucu/lines.gif

  Thank you

  Let me give you a few basics. These are things that are not considered by almost everyone that starts working in the video, especially those who come from a print or web design background. Photographers are also victims of a flaw in their knowledge which is understandable because they have never had to deal with things like this before. Here are the facts.

  First Point:
  Video (and everything that comes from digital displays) are always arranged on a grid of pixels. No exception. You can never put a line width of single pixel on this grid of pixels and do appear as a single pixel line, unless it lines up perfectly. Nothing that is not precisely aligned to the pixel grid is interpreted. It is called Anti-aliasing. This means that if your 1-pixel thick line is to halfway between grid display will be the average of the values in this row and you end up with a broad line of two pixels on the screen with each line taking half the value of the color of the original line. In other words if you are not precisely aligned on the grid of your 1-pixel wide black line becomes a 2px wide gray line.

  Second Point:
  Video is composed of images that reading at a particular rate. Your screen also has a refresh rate. Display rate standard in countries that have 60 Hz electricity usually have a refresh rate standard 60 Hz or multiples of a whole number of this rate divider. In countries where electricity is 50 Hz (Europe), the refresh rate is usually 50 Hz. The video frame rate for video in NTSC countries (most of the world) are normalized to 29.97 FPS (there's a reason associated with the problem of broadcasting TV signals in color, but I won't go into that right now). The Standard in PAL countries video frame rate is 25 fps. When you choose a frame rate for your video project which is not the frequency of standard images for your area, you may rate for your video come into conflict with the cadence of your screen. This can cause perfectly smooth motion judder and there is nothing you can do about it, except change the refresh rate of your screen or lift it up with a new high refresh rate capable display or change the frame rate of your video.

  Third Point:

  The average human eye and brain have a property called retinal retention. These effects how we perceive motion. No matter what you do, most people perceive incorrectly flexible movement across their field of vision. Most of the time the brain tries to iron out things and your eyes automatically try and follow this movement. This effect is well understood by the great directors when they block shots and the great directors of photography when they put cameras if your eye is directed to the part of the frame where they want that to get you to understand the history.

  Fourth Point:
  There is a strobe effect that applies to all the movements. For example, if you watch an old movie on TV western, you will sometimes see the wheels of the car rotate backwards. Smart of an airplane propeller video phone can show you that strange Sword-shaped blades turn slowly or even backwards. It's the interaction between pace and movement. The only way to create videos that shows the movement correctly and in the right direction is to match the query of the cadence.

  Fifth Point:
  Work around the fine lines, turning it into a thicker lines is to disable interpolation. You can do in After Effects by selecting quality draft. With quality lit project, you will always have a thick black line of single pixel. This solves a problem, but worse the other. The problem of the stroboscopic effect. To make your single pixel with black line SOUPLESE you must match the query of the line to the frame rate. You move 1 pixel by image or 2 pixels per image or 3 pixels per image or 4. You cannot move to 1.4 or 2.8 pixels per image. It won't wok, it would never work.

  Sixth Point:
  Even if you perfectly fit the pixel grid movement, you can still run on the retinal retention problem and frame rates. Every Director of professional photography with a value of his day rate knows that there are critical speeds of Pan - speeds during which you can not move the camera in a scene and offer a scene that doesn't pan and look terrible. Jerking can be so bad that it gives people headaches and worse. The frequency of images the more cautious, be with the camera. When the video cameras of 24 frames per second were introduced a whole bunch of people came back with horrible images. Shots that run at 29.97 work at 24. Cadence, retention of the retina, strobe effect and your brain combined with no fixed focal point for your eyes to focus on and track combine to fault up to the shooting and of the query.

  The solution:
  When you want to animate a thin line, you're better off at 29.97 frames per second that anything slower. 30 is OK if you go never broadcast or DVD to watch on a TV. You can use an expression to control the movement, so that your line moves exactly an even number of pixels per image. If your design requires that go you faster you must hide the problem with motion blur. If you want to lighten in and clear it of movement then you must hide the problem of aliasing with motion blur. Smooth long moves must be exactly to an even number of pixels per image. You have more options of speed at a higher speed. Even at a higher speed, you will encounter the problem of the sixth Point.

  The evidence:
  Any problem of smoothing by giving you the discount gray lines load the rendering of your lines animated in AE and step as part of an animation at the same time. Baring any cache image and to make the issues I bet that your animation will run without difficulty from one image to the other. It is only when the video plays back at speed that your eyes and your brain will tell you that the movement is uneven.

  Certain standards:
  Go to a cinema and watch the end titles. It takes about 7 or 8 seconds (depending on the height of the frame) for securities to roll from the bottom of the screen upwards. The second seven rule is pretty standard. With 29.97 FPS 1 video per image pixel, 2 pixels per image and 4 pixels per image work well enough for most applications. When you find a speed frame rate works for your video, it's the frame size and it is write it down. Use it again and again.

  This is an expression that works at the speed of the animation and allows blur to apply to your image. You can do the movement meet the markers if you want to start and stop. I have a bunch of preset animations that I use all the time for that style of animation.

  Bottom-up:

  t = time;

  en = t/thisComp.frameDuration;

  x = value [0];

  s = 4; Speed in pixels per image must be an integer

  y = value [1] - (fr * s);

  [x, y]

  Left to right:

  t = time;

  en = t/thisComp.frameDuration;

  y = value [1];

  s = 4; Speed in pixels per image must be an integer

  x = value [1] - (fr * s);

  [x, y]

  If you wish to reverse the direction, you can add a sign less in the final table or apply the term of anchor instead of position. These expressions take the initial starting position of the layer as a starting point. Both are moving to 4 pixels per image. To start and stop the movement, the simplest method is to split the layer, add the expression, let the layer move, then divide the layer again and delete the expression. If you are handy with expressions, you can bind the movement to layer markers, and then just move the markers for start and stop, or even reverse the direction of a single layer.

  If you don't want to mess with all those unbreakable rules then jack up motion blur and uses a higher cadence with thicker lines and hidden defects. There are no other solutions.

• T430 screen - lines/points

  My 3 month old T430 worked very well until this afternoon.
  Now my screen looks like this:

  BBCode (forums of discussion & forums)
  [IMG] http://i.imgur.com/h0KmyT4.jpg [line]

  I'm not able to boot in the bios. I have also connected to the tv (vga) and it shows the same thing. Once she showed
  the connection, but it was like just for a second and returned to points and lines.

  Is this a common problem?

  Thank you very much for your comments, I appreciate it.

  Note of the moderator; fixed link

  Receipt back to the center of service today. They replaced the screen and the display cable. Works fine now.

• Graph XY no lines, just Points?

  Hi all

  I want to build a graph of pressure relative to the temperature.  It must be a standard XY graph, but I just want to see the scatter point without lines connecting the points.  Is it possible to eliminate the lines between points (or make them invisible)?

  Thank you!

  You can do this in the properties of the graph. Right-click on the chart and select Properties. Go to the locations tab.  Select an icon for the point (something other than ) in the third column of icons. Then select the top of the list in the fourth column. It is the symbol with the track of the points, but no lines. This will give you what you want.

• The mouse cursor/pointer is a dotted line

  I have a very strange problem that I can't seem to understand.  My mouse cursor (arrow) is essentially an image of an arrow dotted and is VERY difficult to see.  I tried to change the pointer to another through the mouse control panel, but it does not help.  Even more strange, I tried to screen capture the cursor so I could provide an image here, but it seems very well in perforated Cap!  My profession is in it and I'm completely stumped!

  I use a HP laptop with Synaptics touchpad.  I tried to reinstall the driver, but that did not help either.

  The slider looks exactly like it's supposed to look like when you type if you have the option Hide under this condition.  I checked for stuck keys and have rebooted several times.

  Hi golfercor,

  Thank you for using Vista answers Forum.

  "The only way I can get it to look normal is turn on pointer trails."  Then, for some strange reason, the pointer/cursor lines become completely solid, even when the pointer is at rest! »

  This really looks like a video card driver problem.

  When you updated the video card driver did you get it on the manufacturer's website?
  Is this a Vista 32-bit or 64-bit?

  Variable monitor refresh rate are common enough, according to the material.

  Impatience back on your part.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Line with the polygon intersection points

  I have a (multi point) line that crosses a polygon and I can find the points of intersection

  See this site for example: find the Points of Intersection between the line and & amp; #160; Polygon

  However, I would get the multi point original line WITH the points of intersection...

  How could do?

  Essentially for a line that crosses a polygon, I have returned...

  a new line which consists of points of origin AND the intersection of points

  Thanks in advance

  Where did you get the geometry intersecting from?

  Table of Ansdo_elem_info does not match your definition of 2005 multipoint, I think.

  This should be SDO_ELEM_INFO_ARRAY (3,1,1, 1,1,1, 7,1,1, 5,1,1) instead of (1,2,1).

  Then the union result geom is a line of 2002 has opposed to your example that returns a collection of 2006.

  And you will see that these points are where you expect them to be. (11R2 test)

  Luke

• Very small lines or points appearing just below the navigation...

  Hello

  I'm on DW CS4 on an Intel Mac. This site has a horizontal Navigation at the top and it has located the as I want, but there are small light blue points or lines light projecting from the bottom on the same edges button images.

  Before, I noticed something like this can be linked to questions of height or borders, but I EVERY boundaries the value 'none '. So what this could be?

  I checked, and in the Fireworks original files are there is no features added, BUT mattes added to these images - which could be causing these points or lines to appear there?

  Here is the site:

  http://www.larryparrishpiano.com

  I appreciate any help or assistance. Thank you, Frank B.

  I see an artifact of 1 pixel protruding corner of LH each of the button GIFs so that they are in your image, not your CSS.

• Beginner: Script to bend 'lines' in flash animation?

  Is there a script simple white lines drawn in animation flash to bend? I want that they animate moving in waves through an AS3.

  Is this possible and if so, how it would be written?

  Of course, it's possible... you would probably start using the method of the Graphics class curveTo.

  Here's a super simple script that will show you the basics - open a new document and paste this into the script of frame:

  var yVal:int = 0;
  addEventListener (Event.ENTER_FRAME, update);
  function update (e: Event) {}
  Graphics.Clear;
  graphics.lineStyle (1, 0 x 000000);
  graphics.moveTo (50,100);
  graphics.curveTo(100,yVal,150,100);
  yVal += 1;
  }

  You will see that a simple curved line animation...

  HTH

  See my post "Some Eye Candy" in the site design section and you will see much more, it is possible...

• no blue lines/points selection

  normally when you work you little and little boxes/points for points selection lines... I have this file that I have been playing with and the stuff of selections just seem to disappear!  I restarted and it is always the same, started a new file and everything goes well in it.

  any ideas?  included file (?)

  You hit the shift B command or command including: hide or hide edges probably order: