Police gets smaller in text fields

Similar Questions

• LiveCycle - police car in the text field

  I use 8 Professional - Livecycle and I have several areas of text field. I want to make the police in 'auto' text fields where they are trying to set within the area. I have trouble finding in via Livecycle. I can find it on my Adobe regular but not Livecycle. Help, please!

  Thank you

  I was able to understand. I just need to change the font to zero size.

  Thanks for your help.

• How to get data from text fields in double.

  Here is the sample code that I had done with,

  var textf:textField;
  for(var i:int = 0;i<=7;i++)
  {
     textf = new textField;
     this.addChild(textf);
     textf.name = "textdata"+i;   textf.x = 500;  textf.y = 50+50*i ; 
  }
  nextbtn:button = new button();this.addChild(nextbtn)nextbtn.x = 400;nextbtn.y = 500;nextbtn.addEventListener(MouseEvent.CLICK,getdata);
  function getdata(e:MouseEvent):void
  {
     trace(textf.text)
  }
  

  From the code above will add six textfields, but in the next button function, it has to be traced back all the data in the fields of text I typed, but the code shown next button only the last textfield data are drawn, all data can be recovered, how do I get the data of all the textfields remaining...

  Please help me,

  Thanks in advance

  You can also watch the event 'target' to determine the object that generated the event.

• Titles in the menu bar are small and blurry as well as all the text fields are reduced in Photoshop

  As you can see by the picture below, my menu bar titles at the top are small and blurry, most anywhere there is an area of text field (i.e. length & width text fields in the window in the size of the Image) she is collapsed vertically and so I don't see what are my values.  You can also see that the 3 boxes check mark at the bottom of the window the size of the Image are cut.  I have CS6 installed on a Windows XP computer without any problem.  Now that I "upgraded" to Windows 7, this is what I get results after installation.

  

  Straighten out your system fonts. All menu entries and pallets using the police hurt eitehr because you deleted the right a (trebuchet, Verdana), he is blocked or has another problem. Also update your graphics driver.

  Mylenium

• How can I get a session state value in my apex or DML text field

  I put a session state in my procedure, in my text field in my I want to get the value of the form region. I try in my text field of the form in the default region, I try

  BEGIN

  APEX_UTIL.GET_SESSION_STATE('USER_SECURITY_PIN');

  END;

  but this does not seem to get the PIN of the session

  How can I do this please

  dave_414 wrote:

  I put a session state in my procedure, in my text field in my I want to get the value of the form region. I try in my text field of the form in the default region, I try

  BEGIN

  APEX_UTIL.GET_SESSION_STATE('USER_SECURITY_PIN');

  END;

  but this does not seem to get the PIN of the session

  How can I do this please

  Depends on the Type of default property item.

  Use a static text with Substitutions of State of Session with a string substitution of static text:

  &USER_SECURITY_PIN.

  or the body of the PL/SQL function (for example):

  return apex_util.get_session_state('USER_SECURITY_PIN');

  or Expression of PL/SQL with a bind variable reference:

  :user_security_pin

• Getting the text field value?

  How can I get the value entered into the field of action tf_1?

  Let's say I'm going to number 5 in the text field tf_1, how can I receive it for use in the code?

  I would like to store that value in the variable, so that I can work with him in a function.

  Can someone help me? I am already grateful!

  var num:Number;

  calcular.addEventListener (MouseEvent.CLICK, resolver);

  function resolver(Event:MouseEvent): void {}

  NUM = Number (tf_1.text);

  If (num/400 = 0) {}

  trace ("Yes!");

  }

  }

• Animate cc, the police is both by default when you change the size of the text field. Have integrated a font with the name prjFnt... but once I have change the rating in the design view of the prjFnt goes to the new roman times... what a mistake... don't

  Animate cc, the police is both by default when you change the size of the text field. Have integrated a font with the name prjFnt... but once I have change the rating in the design view of the prjFnt goes to the new roman times... what a mistake... don't have we not no matter what patch

  This problem has been fixed in the latest update to animate CC.

  You can upgrade to animate CC 15.1.0.1.13 creative use of cloud App or via the Help menu > updates.

• Do I need to use javascript to get a text field in a PDF Tue Fill form with / date of the current day?

  I have a form for booking appointments, and here the date field to fill automatically with

  today's date and print it. I put in the format of the text field 'Date' and when I place the cursor in the

  today's date date field, poster. It disappears as soon as I tab to the next field.

  This action does need a javascript script to fill and print today's date? If Yes, where can I find that?

  Or y at - it another way to fit the text field (not counting as the current date by typing) to get the current date?

  Thank you.

  Ali

  using iMac 2.93 GHz Intel Core 2 Duo 8 GB | OS Snow Leopard 10.6.8 | Acrobat 8 Pro

  See example Acrobat JavaScript by Chris Dahl. The script can be an action script open document level or page to insert the date when the PDF file is open or use as a print action to fill the date just before printing the form. And the formatting of the field is 'None' because JavaScript applies the formatting.

• Get the value of the drop-down list (selectedIndex) and the text field - does not

  Hi all

  I'm trying to find and change the values selected by the user using a drop-down list and text field. Here's the code.

  ChangeRevDetails();
  function ChangeRevDetails(){
  
  
            var myDialog = app.dialogs.add({name:"Enter copyright information"});
  
  
  //    var monthlist = col1.dropdowns.add('myList', undefined, myList);
  
  
            var col1 = myDialog.dialogColumns.add();
            var col2 = myDialog.dialogColumns.add();
    
      col1.staticTexts.add({staticLabel:"Month:"});
            col1.staticTexts.add({staticLabel:"Year:"});
      col1.staticTexts.add({staticLabel:"Rev. no.:"});
      
      var myList = [ "January", "February",  "March", "April", "March", "April", "May", "June", "July", "August", "Sepetember", "October", "November", "December" ];
  
  
       var myMonth = col2.dropdowns.add({stringList:myList, selectedIndex:0, minWidth:100});//{minWidth:100});
       var myYear = col2.textEditboxes.add({editContents:"2013", minWidth:100});   
       var MyRev = col2.textEditboxes.add({minWidth:100});
  
  
      var RevMonth = (myList [myMonth.selectedIndex]);
      var RevYear = myYear.editContents;
      var RevNumber = MyRev.editContents;
      var RevToReplace1 = RevMonth +", "+ RevYear;
      var RevToReplace2 = RevMonth +", "+ RevYear + " Rev. " + RevNumber;
  
  
      var myResult = myDialog.show();
  
  
          if(myYear.editContents == "") //entry is "" 
          { 
          alert("Please enter some text into the contents field."); 
          ChangeRevDetails(); 
          }
          else if(myResult == true) //user entered datas 
          { 
  
  
              alert (RevMonth);
              alert (RevYear);
              alert (RevNumber);
              alert (RevToReplace1);
              alert (RevToReplace2);
  
  
              app.findGrepPreferences = NothingEnum.nothing;
              app.changeGrepPreferences = NothingEnum.nothing;
  
  
              // grep find/change
              app.findGrepPreferences = app.changeGrepPreferences = null;       
              app.findGrepPreferences.findWhat = "[\\l\\u]+?\\s?\\d{4},?\\s+[\\l\\u]+\\.*\\s+\\d+";
              app.findGrepPreferences.appliedParagraphStyle = app.activeDocument.paragraphStyleGroups.item("Back page"). paragraphStyles.item("Legal_7/9");
              app.changeGrepPreferences.changeTo = RevToReplace1;
              app.changeGrepPreferences.appliedParagraphStyle = app.activeDocument.paragraphStyleGroups.item("Back page"). paragraphStyles.item("Legal_7/9");
              app.activeDocument.changeGrep();
  
  
              app.findGrepPreferences = NothingEnum.nothing;
              app.changeGrepPreferences = NothingEnum.nothing;
    
      } 
      else //implies user clicked cancel 
      { 
      myDialog.destroy(); 
      }
  
  
  }
  
  

  The problem is, it does not take the value that the user selects in the drop-down list and the text field. It takes the default value as "January" and the year is '2013' as these two values are given as selectedIndex:0 and editContents: "2013". I compared the coding with a few other scripts work as well, but it does not work. I added several alert boxes to check the value we get.

  In addition, search for it and change also does not work. Please help me on this. Thank you.

  Kind regards

  Bachi. D
  

  Change the order of dialogresults:

  ...

  	var myYear = col2.textEditboxes.add ({editContents: "2013", minWidth:100});})
  	var MyRev = col2.textEditboxes.add({minWidth:100});)

  Ditto var = myDialog.show ();

  	If (myYear.editContents == "") //entry is «»
  	{
  	Alert ("Please enter a text in the content field.");
  	ChangeRevDetails();
  	}
  	else //user entered if(myResult == true) datas
  	{

  	var RevMonth = (myList [myMonth.selectedIndex]);
  	var RevYear = myYear.editContents;
  	var RevNumber = MyRev.editContents;
  	"var RevToReplace1 = RevMonth + ', '+ RevYear;
  	"var RevToReplace2 = RevMonth + ', '+ RevYear + 'Rev' + RevNumber; ...

  did not have a look for the problem of change to find

• How can I get cursor to open above the text field?

  When to create a form with fields of text of the slider opens in the middle of a text field. (according to the image) How can I get cursor to open above the text field?

  Thanks for any help

  

  Set the field to be multiline.

• How to get the text in a dynamic text field?

  Hello

  I would like to get the text in a text field I have on stage and put it into a string. I do this because I don't don't want to use the table to store each letter I click. Is this possible?

  Concerning

  you don't know.  You can use the text property of your textfield object and store that value in a variable.

  You can use a click on a button to trigger this code or change event of the textfield or any number of other triggers.

• How do I size my text field in small increments of 1/4 "

  is there a setting that will allow me to the size of a text in millimeters or smaller field? I see that I can adjust the ruler to display milimmeters and CM, but the text field still to move and size in 1/4 "increments left, right, up and down.

  This applies to the form that I have attached.

  Hi Greg, you should uncheck the option 'snap to grid '. This can be done through the palette "Drawing AIDS" or via the button in the standard menu. It is the button with the 3 forms on that (triangle, circle and square).

• Cannot get 'IN' text field with multiple values.

  I have a text field (P11_SERIAL_NUMBERS) someone would use to enter multiple values (i.e. of the serial numbers). I tested various methods but can't seem to get anything working. I used values such as ' 12929', '19191' or ('11919', ' 19192 ', ' 1111') or 12121,121333.»
  
  I have to analyze this area after the entrance is and update P11_SERIAL_NUMBER to something like ("121212 ', 121211', '292929'). The report is a SQL query returning the body of a PL/SQL function. I build the query in an anonymous block to something like the following:
  
  SELECT apex_item.checkbox (1, instance_number) Ins,.
  apex_item. Text(2,i.instance_number) instance_number.
  apex_item. Text(3,i.item_number) item_number.
  description of the apex_item. Text(4,i.Description),
  Serial_number apex_item. Text(5,i.serial_number),
  i.party_name,
  i.status_name
  Cycsi_item_details_v I have
  WHERE i.item_number IN (SELECT v.item_number FROM cycsi_installed_base_v WHERE v.serial_number = i.serial_number v)
  AND i.item_number AS NVL ('%' |') XLA' | ' %','%')
  AND NOT EXISTS (SELECT d.item_serial_number FROM cy_fco_d, d WHERE d.fco_id = 2803 AND d.item_serial_number = i.serial_number) AND i.serial_number IN ('61763 ', ' 61621');
  
  However, when I enter several values that nothing ever went back to the SUMMIT even though the SQL query returns more rows. I run the application in debug mode and it seems to show the values correctly.
  
  0.11: show report
  0.12: determine the column headings
  0.12: analyze the query such as: TRAFFIC
  0.15: binding: ": P11_MODEL_NUMBER"= "P11_MODEL_NUMBER" value = "XLA"»
  0.16: binding: ": P5_FCO_ID"= "P5_FCO_ID" value = "2803"»
  0.17: binding: ": P11_SERIAL_NUMBERS"= "P11_SERIAL_NUMBERS" value = '(' 61621', ' 61763')""
  0.19: print the column headings
  0.19: loop lines: 15 rows
  No data found
  
  If I add only a serial number at a time as the APEX application returns the line correctly.
  
  
  Does anyone have an idea what I'm doing wrong or what best way to solve this problem?
  Thank you
  John
  
  Published by: Jennifer on July 13, 2010 15:23

  Hi John,.

  I just tried a report region based on PL/SQL query encoded using your method to refer to element names in the query string of back:

  declare
     q varchar2(100) := 'select ename, job from emp';
  begin
     if :P2_ENAMES is not null then
          q := q || ' where ename in :P2_ENAMES';
     end if;
  
     wwv_flow.debug('*** Query: ' || q);
  
     return q;
  end;
  

  As I suspected, he did not work for me P2_ENAMES was ('KING') or ('KING', 'SMITH'). I think it's because of the reason for which I gave in my previous post - ApEx passes off the coast of the dynamic execution of SQL string, it does not automatically replace the mention: P2_ENAMES with the value of the element. I don't know how it can work for you.

  If I change the code I proposed:

  declare
     q varchar2(100) := 'select ename, job from emp';
  begin
     if :P2_ENAMES is not null then
          q := q || ' where ename in ' || :P2_ENAMES;
     end if;
  
     wwv_flow.debug('*** Query: ' || q);
  
     return q;
  end;
  

  It works very well if one or several names are specified.

  I took a blow to modify your code for the construction of the query string - does not immediately guarantee, it'll work because I can't test (might be missing a parenthesis or quotation) it but you should get the idea:

  -- start with initial valid query that ApEx can parse to determine column names
  q := 'SELECT apex_item.checkbox(1, instance_number) ins, apex_item.text(2, i.instance_number) instance_number,
               apex_item.text(3, i.item_number) item_number, apex_item.text(4, i.description) description,
               apex_item.text(5, i.serial_number) serial_number, i.party_name, i.status_name
          FROM cycsi_item_details_v i
         WHERE i.item_number IN (SELECT v.item_number
                                   FROM cycsi_installed_base_v v
                                  WHERE v.serial_number = i.serial_number)';
  
  -- add model number condition if specified
  if :P11_MODEL_NUMBER is not null then
     q := q || ' AND i.item_number LIKE ''%' || :P11_MODEL_NUMBER || '''%''';
  end if;
  
  -- add serial numbers condition if specified
  if :P11_SERIAL_NUMBERS is not null then
     q := q || ' AND i.serial_number IN (' || :P11_SERIAL_NUMBERS || ')';
  end if;
  
  -- add FCO id condition if specified
  if :P5_FCO_ID is not null then
     q := q || ' AND NOT EXISTS (SELECT d.item_serial_number
                                   FROM cy_fco_d d
                                  WHERE d.fco_id = ' || :P5_FCO_ID || '
                                    AND d.item_serial_number = i.serial_number)';
  

  I know that has focused on getting this code works, but I would be remiss in my duties if I didn't at least mention the risk of SQL injection. You may already know this, but unless you do a good job to validate the values of the element used in the query, you could open yourself up to a SQL injection attack. For example, imagine what that would be returned if a hacker sharp entered "12345) GOLD (1 = 1" in the field of P11_SERIAL_NUMBERS - you would get all that may or may not be a security problem.

  Hope this helps,
  John

• How to get the value of viewattribute and how to assign the text field. URG

  Hi all,
  I created messagestyled text programmatically and I want the value of viewAttribute.
  I don't know how to define the instance of the view and display attribute.
  
  I tried this way, it is what is called the vo class but after that i dnt know how to set
  
  Here the code that I used...
  
  (1) I create the messagestyled text
  OAFormattedTextBean cctextbean = (OAFormattedTextBean) pageContext.getWebBeanFactory () .createWebBean (pageContext, FORMATTED_TEXT_BEAN, OAWebBeanConstants.VARCHAR2_DATATYPE, "CCText");
  
  OAMessageStyledTextBean ccidbean = (OAMessageStyledTextBean) pageContext.getWebBeanFactory () .createWebBean (pageContext, MESSAGE_STYLED_TEXT_BEAN, OAWebBeanConstants.VARCHAR2_DATATYPE, "CCId");
  
  (2) and I called the view object
  OAViewObject ccview = (OAViewObject) AM.findViewObject ("CmpnyDetVO1");
  
  (3) I want to set the view instance and viewattribute using code. This stage i dnt know how to define.
  
  (4) I want to know, how to get the value of the attribute to display and how to set the value to the messagestyled text field.
  
  I'm new to OFA. It's Urgent.
  
  Thanks in advance
  Fabrice

  Hello

  use
  Import oracle.jbo.Row;

  OAViewObject ccview = (OAViewObject) AM.findViewObject ("CmpnyDetVO1");
  Line line (Row) = ccview.first ();
  Test String = (String) row.getAttribute ("");

  then to set the value of the text of messagestyled

  OAMessageStyledTextBean bean = (OAMessageStyledTextBean) webBean.findindexedchildrecursive ("CCId");
  bean.setText (test);

  Thank you
  Gerard

  Published by: Gauravv on August 4, 2009 09:38

• How to get back to 3 text fields in the footer

  When you open a new document pages, the footer contains three default text fields.  I have a document where I removed somehow 2 3 fields foot leaving only 1. I would like to add the other 2 fields in the footer, but I am unable to find a setting that would let me. My search terms are apparently useless because I can't find any thread on point in a search. Any ideas?

  You can not remove the tripartite fields in a header or a footer. If you visit the view menu: display invisible characters, you will probably discover tabs or spaces that forced each cell to the right in your footer. Just remove these external characteristics and you will restore the three cells to your footer.