Political VPD is applied on the political function!

Similar Questions

• Change the storage profile (PAF) policy and apply to the home and VMDK

  Hi there, I need to change the policy of storage on a cluster with a value of virtual machines. I have follow-up vSphere PowerCLI 5.8 PAF Walkthrough (part 1): Introduction | VMware vSphere Blog - VMware Blogs, specifically, run this:

  Get-Cluster "mycluster | Get - VM "myvm.local" | Game-SpbmEntityConfiguration - StoragePolicy 'VSAN-FTT = 1 ".

  This applies to the new political profile is stored in the folder 'home' of the virtual machine, but do not know the VMDK, where the virtual machine is not consistent with the policy. How can I do so that it changes the policy I'm specifying the House and all the vmdk on the virtual machine.

  Thanks in advance,

  You must define the strategy of storage on hard drives as well as in an additional command, for example:

  $vm = get-Cluster "mycluster | Get - VM "myvm.local."

  $hd = get-disk hard - VM $vm

  $vm | Game-SpbmEntityConfiguration - StoragePolicy 'VSAN-FTT = 1 ".

  $hd | Game-SpbmEntityConfiguration - StoragePolicy 'VSAN-FTT = 1 ".

• How to search engine choices do not apply to the navigation bar

  To reproduce:
  -set google as default search engine
  -Select an item in the search panel (not google)
  -Type a query in the navigation bar (only text)
  -press on enter
  Early in this case google search was conducted
  Now you can search via the search engine selected in the search panel.

  Is it possible to change this behavior, as it was?

  It is an intentional change in Firefox 23 and upward. It also applies to the search box on: home.

  You can use the keyword search to get back to the old behavior. It is available here:

  https://addons.Mozilla.org/en-us/Firefox/addon/keyword-search/

  See also this issue of support for general information on the change of function:

  https://support.Mozilla.org/en-us/questions/967150

  I hope this helps.

• Want only two tabs, side by side, in the fully functional screens... as split view of Maxthon.

  I would like to purchase an add-on similar to Maxthon's split view functionality. In Maxthon this plugin allows not only the opening of the two tabs side by side, but at the same time also allows independent navigation within each of the two screens while keeping the tabs accessible to a tab bar of splits above the screens from. In other words, let's say we have tabs A and B and place each in their own screens (now have two screens, one with a web site and the other with the website of B). Selection of links to A or B will open tabs in each of their respective screens and open tabs on their respective parts of the tab bar. Make a left click on a screen makes activate with full web browsing feature (all Mx actions will be applied to the selected screen). It's like having two pages side by side and each of them is controlled entirely independently. What type of finish, cancellation in split view, returns the browser to one screen with all the open links represented by their respective tabs. Really a great plugin.

  Maybe if you disable 'Tabs Mix Plus' your real/original issue could be resolved by "Fox Splitter". TMP plays havoc with Firefox and a large number of extensions.

• How to implement a callback to the help function call library function node in LabView?

  I try to call a fuction from a SDK.dll library by using the node call library feature. The SDK has been provided to

  me and I don't have the source code, just the .dll and .h files.

  The SdkSetPropertyEventHandler function has a function of recall as one of its parameters. How to apply the

  callback using the NSI node? I'm a good programmer LabView but this is my first time using the library to call

  Function node. I read all the info I can find on the web site of NOR and the discussion Forum, but can not understand

  This one out. I'm using LabView 8.6.

  The deacribes SDK.h function as:

  Function: SdkSetPropertyEventHandler

  (SdkSetPropertyEventHandler) SdkError SDKAPI
  SdkCameraRef inCameraRef,
  SdkPropertyEvent inEvnet,
  SdkPropertyEventHandler inPropertyEventHandler,
  SdkVoid * context);

  //
  Description:
  Registers a callback function to receive the status
  change the notification events for the States of property on a camera.
  //
  Parameters:
  In: inCameraRef - designate the object camera.
  inEvent - designated one or all the events will be completed.
  inPropertyEventHandler - designate the pointer to the callback
  function to receive the camera property-related events.
  inContext - designated application information must be passed
  way to the callback function. All the data necessary to
  your application can be passed.
  Output: no
  //
  Returns: A sdk errors.
  -----------------------------------------------------------------------------*/

  A separate header called SDKTypes.h file contains the following data:

  typedef SdkUInt32 SdkPropertyEvent;
  typedef SdkUInt32 SdkPropertyID;
  typedef void SdkVoid;

  typedef struct __SdkObject * SdkBaseRef;
  typedef SdkBaseRef SdkCameraRef;

  /*-----------------------------------------------------------------------------
  SdkPropertyEventHandler
  -----------------------------------------------------------------------------*/
  typedef SdkError (SDKCALLBACK * SdkPropertyEventHandler))
  SdkPropertyEvent inEvent,
  SdkPropertyID inPropertyID,
  SdkUInt32 inParam,
  SdkVoid * context);

  Thanks for your help.
  Alejandro

  Andrew_E wrote:

  Hi Rolfk,

  You are absolutely right. This article describes what you were talking about? I'm just trying to get as much information as possible on this thread if the solution is easier to find for the future. Thank you.

  Yes, but I find the idea of using .net to call a LabVIEW VI as callback function C a bit as using a roll of Steam ironing your pants. Why do it? Well the steamroller has extra security guards that make it less likely that you'll break your pants in the process, but it's not elegant IMHO.

  Write a C DLL that translates between a C callback and a user event LabVIEW using the PostLVUserEvent() of the interface of the kernel to run LabVIEW function seems so eleganter for me. Yes, it's a bit of programming in C, but good!

  Rolf Kalbermatter

• The power spectral density function counts inaccurate amplitude caused by the window function?

  I'm new to this forum, so please let me know if this would correspond better to a different discussion forum.

  Here's the question:

  I would like to know if the power spectral density function ("FFT PSD for 1 Channel.vi") automatically compensates for the loss of the amplitude of entry caused by the window function.  In other words, is a specific window correction factor applied within the PSD vi or do I apply manually?

  Details of the background:

  I tried to answer the question myself by generating a sine wave sampling, it as it is periodic in record time (i.e. 0 to each end of recording time).  The frequency of the sine wave was such that the frequency would exactly correspond to a spectral line in the PSD.  Then I generated the PSD of the sine wave twice: once using a Hanning window and once using a rectangular window (not on average in both cases).  The rectangular extent of the PSD with windows to the frequency of the sine wave is 1.5 times the size of the PSD with a Hanning window applied.

  The experience above indicated to me that a manual setting of the PSD output for the function of window was necessary, however, I repeated the above experiment using random vibration data and does not clear 1.5 x factor.  I have also been informed by his colleagues that the PSD should set for the window function.

  Thank you for your comments.

  Spectral leakage.  When you use a finished sample data from the spectrum resulting is the convolution of the spectrum of the signal as if it extended indefinitely in time with the spectrum of the window.  Even if you do not use a window function, you actually have a rectangular window the same width as the sample size.

  Draw out of the VI PSD with all style of trace to show points to the data points. Turn off Auto scale on the X axis, and expand the graph around your pic. Look at the results of different windows.  In any case, there are several values non-null.  With actual sampled data of limited duration, you will never get the idealized line spectrum.

  If summarize you the output spectral value remains close to 3.2 for all windows.

  Lynn

• How can I use the BCGTransform function to treat the 16-bit Image?

  Hi ~

  I use LabWindowsCVI8.5 and NI Vision to make the treatment of the Image. When I read the "IMAQ Vision for LabWindowsCVI Reference Manual", I found that the imaqBCGTransform function only supports 8-bit Image, while I do the BCG to turn on 16-bit image. Are there solutions to use the BCGTransform function to deal with the 16-bit Image? Or any other feature that could make the correction Gamma, contrast and brightness on the 16-bit Image?

  Thank you very much!

  because imaqBCGTransform is implemented as a lookup table, we can understand why it is limited to 8-bit images.

  Now let's take a look at the definition of each of this mandate (from the NI Vision Concepts documentation):

  -brightness: a constant added to the components red, green, and blue pixel of color over color, decoding of the process;

  -contrast: a constant multiplication factor applied to the components of the luma and chroma of a pixel of color in color to decoding process.

  -gamma correction: expand high gray-level information in an image while removing information of low level of gray.  (the chapter on lookup tables gives some examples of corrections gamma)

  now that you understand that this transformation is a simple mathematical function, simply calculate the correction for each pixel on your 16-bit images.

  I know not the exact formula used by the imaqBCGTransform function, but you should be able to approach by performing some tests on images 8 bits with the original function... or you can make your own formula... or find one on the net... or you can ask someone at home OR you give the formula...

• How to make the false colors on gray-scale image? Are there examples of the imaqSetWindowPalette function?

  Hi ~ I'm using LabWindows/CVI & OR vision. I want to apply false colors on my image of gray, but I don't know how to use the imaqSetWindowPalette() function. Are there examples? or a better idea? Thank you very much ~ ~ ~

  It depends on what you're trying to achieve:

  1 imaqSetWindowPalette() change the palette to display only. This affects the display, but still, the underlying image is grayscale.

  a simple use is:

  {

  const int window = 1;

  Image * image;

  / * retrieve and store your image * /.

  ...

  / * change the palette * /.

  imaqSetWindowPalette (window, IMAQ_PALETTE_BINARY, NULL, 0);

  / * display the image * /.

  imaqDisplayImage (image, window, TRUE);

  }

  as specified in the documentation, the third and the fourth parameter of imaqSetWindowPalette() are used only when the pallet type is set to IMAQ_PALETTE_USER, in this case, you specify the colors you want to use for the display.

  {

  / * declare and fill you the palette * /.

  RGBValue palette [256];

  / * fill your palette here * /.

  palette [0]. R = 0;

  palette [0]. G = 0;

  palette [0]. B = 0;

  .alpha palette [0] = 0;

  palette [1]. R = 255;

  palette [1]. G = 0;

  palette [1]. B = 0;

  palette [1] .alpha = 0;

  / * etc * /.

  / * Use the palette * /.

  imaqSetWindowPalette (range of the window, IMAQ_PALETTE_USER, sizeof (palette) / sizeof (* palette));

  }

  fixed palette, you can also set you palette with an initializer:

  RGBValue palette [256] = {{0,0,0,0}, {255,0,0,0}, {0,255,0,0}}; / * you write 256 color values you want your palette consists of * /.

  2. If you want the palette to be final during the recording of the image with the new applied palette, you can specify the palette in the call to imaqWriteFile().

  3. or you can convert your image to RGB (imaqCast()) then... you're on your own: for some unknown reason, the lookup table in a call to imaqCast() converting grayscale 8 bit RGB is not documented as being used. error in documentation? removal of the deliberate feature? Finally, you can test what happens if you specify one.

• How to make my f1 - f12 keys to the origin function

  My laptop is HP 431. On my keyboard here small image of f1 to f12. example like f5 has a picture of something like "the Earth", this means that if you click on it, it will open the 'internet' browser (for example, google chrome, etc.). Another computer f5 = refresh, but me f5 = open the internet browser. How to transform my f5 refresh like another computer? Clik fn, or what?

  Please answer me, I need your help. I use my f1 - f12 for another program and if I click on f5 it will open the web browser, and I can't play my program...

  There might be an easier way, but it varies depending on the PC manufacturers.

  Press the Windows key and the X key.  This will open the Windows Mobility Center - a utility you will find has been customized by HP.

  They may be provided an entry for "Function key behaviour" which allows to switch between the "multimedia buttons" & "function keys."  Then you might normally have quick access to the uses of these media keys but deliberately off it when you want to use those applications for which it is delicate.

  Similarly, while the keys are defined as multimedia keys, you should be able to press the Fn key with the key F1-12 to make it work like a normal F1-12 key.  And when they are ready to be normal F1-12 function keys, you could press Fn with F1-12 key to make them work as multimedia keys.  In other words, using the Fn key with the key function back everything is set up as its normal behavior.  Again, this varies with PC manufacturers, but is a fairly widespread ability then try to see if it applies to your PC.

• Where is the Convert function in DW?

  I want to convert web pages in HTML 5, but I could not find the option "Convert" in the file menu.

  The "Convert" function is no longer supported in DW?

  I do not remember a feature ' file > convert ' in the program, but maybe it's just because I've always used the following...

  To change a page existing coding HTML5 to html4, xhtml, etc., you can...

  1. open the page in DW

  2. click on modify > Page Properties > title/encoding > change the Document Type (DTD) of HTML 5 drop

  3. valve apply then OK

  4. Rinse and repeat for all pages of a site

  To change the default encoding of new pages that you create with DW...

  1. go in Edition > Preferences > new Document

  2. change the drop Type of default Document (DTD) in HTML5

  3. valve apply, then close

• Date of the change in default when returned by the IIF function

  Hello

  Please can someone explain why the $vdate is displayed as a decimal number in the following code. It seems that the IIF() function returns a value by default and not what I put

  Thank you.

  < cfset vNow = DateFormat (Now (), ' mm/dd/yyyy') >

  < cfoutput >

  vNow = #vNow # < br / >

  < / cfoutput >

  < cfset $vdate = iif (true, vNow, "") >

  < cfoutput >

  $vdate = #vDate # < br / >

  In the format $vdate = #DateFormat(vDate,"mm/dd/yyyy") # #TimeFormat(vDate, "hh:mm:ss") #.

  < / cfoutput >

  Too bad. I had to apply rated (IN ()) for the parameter of the IIR as well and it works:

• Need help with the analytic function

  I want to get the highest employee details and the 2nd highest employee for a particular service. But also the Department should have more than 1 employee.
  I tried the query and it gave me the correct results. But I wonder if there is another solution than to use the subquery.
  
  Here is the table and the query result:
  

  with t as
  (
  select 1 emp_id,3 mgr_id,'Rajesh' emp_name,3999 salary,677 bonus,'HR' dpt_nme from dual union
  select 2 ,3 ,'Gangz',4500,800,'Finance' from dual  union
  select 3 ,4 ,'Sid',8000,12000,'IT' from dual  union
  select 4 ,null,'Ram',5000,677,'HR' from dual  union
  select 5 ,4,'Shyam',6000,677,'IT' from dual union
  select 6 ,4 ,'Ravi',9000,12000,'IT' from dual   
  )
  select * from 
  (select emp_id, mgr_id, emp_name, dpt_nme, salary, row_number() over (partition by dpt_nme order by salary desc) rn from t where dpt_nme in 
  (select dpt_nme from t group by dpt_nme having count(*) > 1)) where rn < 3

  Hello

  You need a subquery, but you don't need more than that.
  Here's a way to eliminate the additional subquery:

  WITH     got_analytics     AS
  (
       SELECT  emp_id,     mgr_id,     emp_name, dpt_nme, salary
       ,     ROW_NUMBER () OVER ( PARTITION BY  dpt_nme
                                 ORDER BY          salary     DESC
                         )         AS rn
       ,     COUNT (*)     OVER ( PARTITION BY  dpt_nme
                                     )         AS dpt_cnt
       FROM     t
  )
  SELECT  emp_id,     mgr_id,     emp_name, dpt_nme, salary
  ,     rn
  FROM     got_analytics
  WHERE     rn     < 3
  AND     dpt_cnt     > 1
  ;
  

  Analytical functions are calculated after the clause WHERE is applied. Since we need to use the results of the analytical ROW_NUMBER function in a WHERE clause, which means that we have to calculate ROW_NUMBER in a subquery and use the results in the WHERE clause of the main query. We can call the COUNT function analytical in the same auxiliary request and use the results in the same WHERE clause of the main query.

  Would what results you if there is a link for the 2nd highest salary in some Department? For example, if you add this line to your sample data:

  select 7 ,3 ,'Sunil',8000,12000,'IT' from dual  union
  

  ? You can use RANK rather than ROW_NUMBER.

• analytical function and the aggregate function

  What are the analytical function and the aggregate function. What is the difference between them?

  Hello

  Analytic Functions : -.

  Analytical functions calculate a value of aggregation based on a group of lines. They differ from aggregate functions because they return several rows for each group. The Group of rows is called a window and is defined by the analytic_clause. For each line, a sliding window of lines is defined. The window determines the range of lines used for the calculations for the current line. Window sizes can be based on a physical number of rows or a logic as the time interval.
  Analytical functions are the last set of operations performed in a query with the exception of the last ORDER BY clause. Every joint and every WHERE, GROUP BY and HAVING clauses are met before the analytical functions are handled. As a result, analytic functions can only appear in the select list or the ORDER BY clause.
  Analytical functions are commonly used to calculate cumulative aggregates, moving, centered and considered.

  Aggregate functions : -.

  Aggregate functions return a line of single result based on the groups of lines, rather than on the unique lines. Aggregate functions can appear in selection lists, as well as in the HAVING and ORDER BY clauses. They are commonly used with the GROUP BY clause in a SELECT statement, where Oracle Database splits the rows in a table when asked or seen in groups. In a query that contains a GROUP BY clause, the select list items can be aggregation functions, GROUP BY constant expressions or expressions involving one of them. Oracle applies the functions of aggregation for each group of rows and returns a single result for each group line.
  If you omit the GROUP BY clause, Oracle then applies any aggregate functions in the select list for all rows in the table queried or the view. You use aggregate functions in the HAVING clause to eliminate groups of the output based on the results of aggregate functions, rather than the values of the individual lines of the queried table or view.

  Let me know if you feel any problem understanding.
  Thank you.

  Published by: varun4dba on January 27, 2011 15:32

• Using the data logged in an interface with the aggragate function

  Hello
  
  I'm trying to use logged data from a source table in one of my interfaces in ODI. The problem is that one of the mappings on the columns target implies a function (sum) overall. When I run the interface, I get an error saying not "a group by expression. I checked the code and found that the columns jrn_subscriber, jrn_flag, and jrn_date are included in the select statement, but not in the group by statement (the statement group contains only remiaining two columns of the target table).
  
  Is there a way to get around this? I have to manually change the km? If so how would I go to do it?
  
  Also I'm using Oracle GoldenGate JKM (OGG oracle for oracle).
  
  Thanks and really appreciate the help
  
  Ajay

  "ORA-00979"when the CDC feature (logging) using ODI with Modules of knowledge including the aggregate SQL function works [ID 424344.1]
  Updated 11 March 2009 Type status MODERATE PROBLEM

  In this Document
  Symptoms
  Cause
  Solution
  Alternatives:

  This document is available to you through process of rapid visibility (RaV) of the Oracle's Support and therefore was not subject to an independent technical review.

  Applies to:
  Oracle Data Integrator - Version: 3.2.03.01
  This problem can occur on any platform.
  Symptoms
  After successfully testing UI integration ODI using a function of aggregation such as MIN, MAX, SUM, it is necessary to implement change using tables of Journalized Data Capture operations.

  However, during the execution of the integration Interface to retrieve only records from Journalized, has problems to step load module loading knowledge data and the following message appears in the log of ODI:

  ORA-00979: not a GROUP BY expression
  Cause
  Using the two CDC - logging and functions of aggregation gives rise to complex problems.
  Solution

  Technically, there is a work around for this problem (see below).
  WARNING: Problem of engineers Oracle a severe cautioned that such a type of establishment may give results that are not what could be expected. This is related to how ODI logging is applied in the form of specific logging tables. In this case, the aggregate function works only on the subset that is stored (referenced) in the table of logging and on completeness of the Source table.

  We recommend that you avoid this type of integration set ups Interface.
  Alternatives:

  1. the problem is due to the JRN_ * missing columns in the clause of "group by" SQL generated.

  The work around is to duplicate the knowledge (LKM) loading Module and the clone, change step "Load Data" by editing the tab 'Source on command' and substituting the following statement:
  <%=odiRef.getGrpBy()%>

  with
  <%=odiRef.getGrpBy()%>
  <%if ((odiRef.getGrpBy().length() > 0) && (odiRef.getPop("HAS_JRN").equals("1"))) {%>
  JRN_FLAG, JRN_SUBSCRIBER, JRN_DATE
  <%}%>

  2. it is possible to develop two alternative solutions:

  (a) develop two separate and distinct integration Interfaces:

  * The first integration Interface loads the data into a temporary Table and specify aggregate functions to use in this initial integration Interface.
  * The second integration Interfaces uses the temporary Table as Source. Note that if you create the Table in the Interface, it is necessary to drag and drop Interface for integration into the Source Panel.

  (b) define the two connections to the database so that separate and distinct references to the Interface of two integration server Data Sources (one for the newspaper, one of the other Tables). In this case, the aggregate function will be executed on the schema of the Source.

  Display related information regarding
  Products

  * Middleware > Business Intelligence > Oracle Data Integrator (ODI) > Oracle Data Integrator

  Keywords
  ODI; AGGREGATE; ORACLE DATA INTEGRATOR; KNOWLEDGE MODULES; CDC; SUNOPSIS
  Errors
  ORA-979

  Please find above the content of the RTO.
  It should show you this if you search this ID in the Search Knowledge Base

  See you soon
  Sachin

• Definition of indicator in a collection does not apply to the catalog?

  Hello

  Question from newbie here: I have filed my images in a structure of (quite complicated!) collection and am browsing to set ratings and flags. It seems that whenever I put the flag "Rejected" for an image while browsing the collection, it is not applied to the image "in the catalogue". I'm not sure I'm properly explain, but my goal is to then use the function "Delete rejected images" to remove these images of the catalogue and the disc.

  It looks 'denied deleting images' are interpreted as 'delete the image of the collection", which actually makes sense. But I want my setting of rating/flag to be also applied to the image when you look at the catalog for that I able to, and then select the catalog and use the function "Delete rejected images" as stated above.

  In other words, it seems like sides/flags settings I apply everything by browsing the collection is not applied to the images when you look at the catalogue.

  Am I missing something here?

  Thank you for your help

  Flags is local (applies to only occasionally) while the stars and colors are global. I suggest that you look here for details and especially to see the related video.

  http://help.Adobe.com/en_US/Lightroom/3.0/using/WSEEE8FD0F-DFD8-47D0-A6FE-DD726E5F2E1A.htm l